## HOT & FREE ## Unlock ALL LG KS20 here ##

[rockerenator]

## HOT & FREE ## Unlock ALL LG KS20 here ##

read phone code and unlock code (reads only unlock code for ks20) for lg qualcomm
-------------------------------------------------------------------------
Code:

enter code 2676625720#

menu will show, press

Port Setting → 1. Diag Setting → 1. USB Set for Diag → “OK” → “Back”.
(Port Setting → 1. Diag Setting →) 2. USB Switching → “LG Composite -DUN, DIAG”.

press "Done" and reset your device.

drivers:
http://rapidshare.com/files/99459712/LGCoronaUSBDriver.rar

CODE READER :
http://rapidshare.com/files/99459711/ks20.rar
-------------------------------------------------------------
execute application and follow instructions

well, if you find any bugs, please report them here.
don't forget to say thnx to arash and the new :D

[rockerenator]

instruction
http://www.hack3r2k.com/1.jpg

[madin972]

Had you test this with a vodafone ks20 from france ?

[andyjia1984]

OK thanks man, you are so great

[massamike]

Ok I've juste tested it with my French SFR KS20 and it just works nice ... Thanks

Ok, ca marche avec le KS20 SFR ... Merci

[rockerenator]

@madin972 (http://forum.xda-developers.com/member.php?u=789811) it's work with all version and all network

[cfac]

Many THANKS !
It works ...
:D

[Wolfseal]

Ok I've juste tested it with my French SFR KS20 and it just works nice ... Thanks

Ok, ca marche avec le KS20 SFR ... Merci

Thx for the good news.
Merci de l'info

[swedish_75]

Thanks very much dude great post

Bon maintenant il ne reste plus que le nouveau Rom

[DomZ]

humm çà marche pas chez moi,

L'installation s'est bien passée, les drivers sont installés.

Les manips sur le téléphone aussi

J'ai bien le périphériques LG Corona visible dans le gestionnaire de périphérique windows.

Mais le programme code reader, m'affiche "searching device" constamment.

PS : je suis sous Windows Vista.

[DomZ]

humm çà marche pas chez moi,

L'installation s'est bien passée, les drivers sont installés.

Les manips sur le téléphone aussi

J'ai bien le périphériques LG Corona visible dans le gestionnaire de périphérique windows.

Mais le programme code reader, m'affiche "searching device" constamment.

PS : je suis sous Windows Vista.

Bon en fait, il faut executer le programme avec les droits administrateurs sous Vista et çà marche :)

[toimoinous]

Qqn pourrait expliquer un peu plus en details..
Quelles sont les etapes.?
On tape le code et on suit les etapes et ensuite..??
On lance le driver?le code reader??

merci

[DomZ]

Qqn pourrait expliquer un peu plus en details..
Quelles sont les etapes.?
On tape le code et on suit les etapes et ensuite..??
On lance le driver?le code reader??

merci

Tu installes le driver sur le PC
Tu fais les manipulations sur ton téléphone (cf. post 1 et 2), tu oublies pas le reset a fin
Tu lances le programme lg_.exe (code reader) (si tu es sous Vista, tu oublies pas de l'executer avec les droits administrateur)
Ensuite c'est simple tu tapes les codes sur ton téléphone

[mg67]

marche pas chez moi non plus.... :confused:
Je suis sous XP, l'install du driver c'est bien passée et à chaque fois que je connecte le mobile par le port usb, le driver est chargé dans le gestionnaire de prériphérique. Par contre à chaque fois que je lance lg_.exe le programme sort avec le message : "Can't find device.".
Quelqu'un peut aider ?

[toimoinous]

Merci DomZ de ta reponse.
Reste plus qu'a me trouver un cable usb pour le KS20 ,j'ai perdu le mien....

[mg67]

Bon ben ça y est ça marche ! Ca fait une heure que j'essaye avec le mode téléphone désactivé... :)
Alors faites pas comme moi, commencer par activer la fonction téléphone !

Merci donc à Arash !!!!

[swedish_75]

As-tu installé tous les pilotes détectés par la connexion de ton KS20 à ton ordinateur? (Détection d'un périphérique modem ...)

[DomZ]

Bon ben ça y est ça marche ! Ca fait une heure que j'essaye avec le mode téléphone désactivé... :)
Alors faites pas comme moi, commencer par activer la fonction téléphone !

Merci donc à Arash !!!!

Est ce que tu as eu un message une fois que tu as tapé ton code ?

[Reptilz]

Mouais, perso je n'arriver pas. J'ai installé tout les drivers comme il fallait, mais lorsque je lance le ks20reader, avec les points d'attente de "getting info" le lanceur se ferme automatiquement...

Sinon, une question, a cause de ses pilotes, mon ks20 ne peut plus être lu en tant que PPC par activesync; Une idée? Je n'arrive plus à accèder à mon mobile :s

[spocky12]

Désolé les gars mais la moindre des politesses dans un forum international est de parler anglais, si vous voulez continuer en francais allez sur forummobiles (http://www.forummobiles.com/index.php?showtopic=163526&st=195).

Sorry guys but this is an international forum, using anything else than english here seems very impolite to me.

[miminh]

i have a ks20 with v10f but when i want to unlock him with the program lgreader i can't see the code in the windows because after see getting info with........... the windows shutdown.

who cans help me please .

[pichouss]

It worked perfectly for me!

Thanks a Lot!:cool:

[arash_]

@miminh:

communication problems, it can be very possible port detection problems, altought phone search routines which i wrote must and are static

please contact me in private a bit debugging and helping you out.

[Reptilz]

I have the same problem. The window is closed just after “getting information”… If you have the solution or if I can help, I would do it!

PS: Afflicted I have bad English but I am French

[boysana]

I have a SFR KS20 and I am trying to reflash the phone.....

When I insert my SIM in the phone and power it up I am in what looks like the the emergency call screen

It says

"Mot de passe

Il est possible de passer des appels d'urgence."

the numpad below does not have a # to press how do I enter the code to start the engineering menu??

kindest regards

b

EDIT:

babelfish says that it means:

"Password

It is possible to pass from the emergency calls"

and I can only dial 000 and 112 (which I don't :))

what do I need to do?

I don't have easy access to as SFR SIM as I am in Australia (yes I am a klokan :))

Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[scarflex]

Easy!Just go to start menu to phone icon a press it!
Remove u Sim!
Tanks guys for this FREE solution!It's work great!!!

[dakoyaz]

I have a SFR KS20 and I am trying to reflash the phone.....

When I insert my SIM in the phone and power it up I am in what looks like the the emergency call screen

It says

"Mot de passe

Il est possible de passer des appels d'urgence."

the numpad below does not have a # to press how do I enter the code to start the engineering menu??

kindest regards

b

EDIT:

babelfish says that it means:

"Password

It is possible to pass from the emergency calls"

and I can only dial 000 and 112 (which I don't :))

what do I need to do?

I don't have easy access to as SFR SIM as I am in Australia (yes I am a klokan :))

Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

it seems you may enter a pin code...

[boysana]

what does 'deverrouiller' mean?

It is on the bottom left hand corner of the screen with 'menu' on the bottom left hand corner.

This is crap

[DomZ]

what does 'deverrouiller' mean?

It is on the bottom left hand corner of the screen with 'menu' on the bottom left hand corner.

This is crap

That's mean "unlock", this is for unlock the screen.

[dakoyaz]

what does 'deverrouiller' mean?

It is on the bottom left hand corner of the screen with 'menu' on the bottom left hand corner.

This is crap

déverrouiller = unlock

[dakoyaz]

damn, DomZ you're fast! :rolleyes:

[boysana]

so it seems i have to enter the code and then press 'unlock'

Any SFR owners? What was the default unlock code??
EDIT:

Should I just do a hard reset and start again?

how do i do a hard reset?

EDIT 2:

not feeling so hot&free right now

[boysana]

ok
a big sorry to everyone, I could not get in to the handset as this was acquired off ebay and the owner had played around and put in a PIN. I could not work this out due to the French language angle so finally found out how to do a hard reset over here

http://forum2.mobile-review.com/showthread.php?p=657942

and now i am in :)

about to start flashing now

sorry to the 20 people I PM'd, I was desperate.............................

peace, love and understanding

[dreamcatchpda]

Can someone post the usb drivers and the unlockcode reader again? The rapidshare link is not working right now!! Thanx.

DreamC

[dreamcatchpda]

I have found them:

forum.gsmhosting.com/vbb/showthread.php?p=3157376

http://rapidshare.com/files/99445638/LGCoronaUSBDriver.rar.html

[rockerenator]

@dreamcatchpda (http://forum.xda-developers.com/member.php?u=275780)

what did u found the lost island lol

it's already posted in the first post

WBR :)

[sjorro77]

it worked for me

thanks

[the new]

pliz any one have ks20 version 10f (other than ho have posted ) pliz test and post result if work or not ?;)

[madcow0506]

It worked for me. KS20 SFR... Many thanks

[stylus1828]

Worked For Meeee 2 ! Thankx A Lot Guys! :d Very Happy Now! :d:d:d:d:d

[miminh]

i have a v10f it's not work the windows close after message "getting info" arash help me to find a solution but we not arrived again.

[jpenzo]

Download LG corona driver & KS20.rar (lg_.exe)

1 - KS20 not connected on PC
2 - Install driver LG Corona on XP (it will install Modem, USB & Serial port drivers ) to enable communication in Diag mode
3 - On KS20 follow the procedure bellow to enable communication in Diag mode

and reset the KS20

4 - Plug the original usb cable on the PC and switch on the KS20
wait until Xp will make the Plug and Play

5 - Now run the lg_.exe software to read the famous code UNLOCK
it will appear at the end of the MSDOS window
make a copy of the line UNLOCK CODE :
2945#*20# >>> xxxxxxxxxxxxx <<<< that's your code

6- close the msdos window
and type on the Dialer the unlock access code
2945#*20#

a new window ask you to type the unlock CODE
type the code xxxxxxx and OK

AND NOW PUT you new SIM ORANGE, BOUYGUES etc....
thanks to all for the helps

From a french guy, who was waiting this software since 2 months
bye

[rickou26]

Ask those who possess V10f ROM.

1/Configure your KS20 as for of sim-unlock (enable communication in Diag mode)
2/No Activate the sleep mode (the GSM has to remain active not to interrupt Com).
3/Install LGMDP_1_1_.5_Build_12.11_Release (you will find it on GSMFORUM)
4/Launch LGMDP_EURO.exe a window opens and looks for your device. Click Connect
5/Close the first window which opens just after the connection,
6/Then in the main window click Download.
7/The soft creates a file with the extension NV2 (type NV_KS20_20080315-134929.nv2)
7/to Give the file on upload.

Thank.

[boysana]

Download LG corona driver & KS20.rar (lg_.exe)

1 - KS20 not connected on PC
2 - Install driver LG Corona on XP (it will install Modem, USB & Serial port drivers ) to enable communication in Diag mode
3 - On KS20 follow the procedure bellow to enable communication in Diag mode

and reset the KS20

4 - Plug the original usb cable on the PC and switch on the KS20
wait until Xp will make the Plug and Play

5 - Now run the lg_.exe software to read the famous code UNLOCK
it will appear at the end of the MSDOS window
make a copy of the line UNLOCK CODE :
2945#*20# >>> xxxxxxxxxxxxx <<<< that's your code

6- close the msdos window
and type on the Dialer the unlock access code
2945#*20#

a new window ask you to type the unlock CODE
type the code xxxxxxx and OK

AND NOW PUT you new SIM ORANGE, BOUYGUES etc....
thanks to all for the helps

From a french guy, who was waiting this software since 2 months
bye

Hey man just a few questions
(3)after step three when you (and everybody) says to reset the phone, is that turning the phone off and back on or something else?

(4)at step four you describe the XP plug and play, what i get is something like a wizard to install the hardware, this eventually hangs................

(5) so then at five the lg.exe does not ever detect the phone.............

I am stuck!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[TOZE]

same thing for me

[TOZE]

I Have Found Solution

Make A Factory Reset In The First Menu To Start Unlock Process

Work 100%

[boysana]

Ask those who possess V10f ROM.

1/Configure your KS20 as for of sim-unlock (enable communication in Diag mode)
2/No Activate the sleep mode (the GSM has to remain active not to interrupt Com).
3/Install LGMDP_1_1_.5_Build_12.11_Release (you will find it on GSMFORUM)
4/Launch LGMDP_EURO.exe a window opens and looks for your device. Click Connect
5/Close the first window which opens just after the connection,
6/Then in the main window click Download.
7/The soft creates a file with the extension NV2 (type NV_KS20_20080315-134929.nv2)
7/to Give the file on upload.

Thank.

Has this been tested on another firmware??

[boysana]

double post

[aragorn21]

done on KS20 from France with SFR...great !

[rickou26]

Has this been tested on another firmware??

Hello,
I tested this manipulation successfully on my KS20 V10b.

[jpenzo]

same thing for me

after step 3
yes just switch off the phone with the right button press 3 sec
and turn it off (soft reset)
and switch on after to be recognized by Xp in diag mode

step 4
let XP to find the device, and make the automatic browse because you had already install the drivers, so just press recommanded to windows found the drivers it should instal at least 4 devices
after this step you KS20 is detected as a new device but in Diagnostic mode

after step 5 run the LG_.exe soft
it open MSDOS window, and press enter to make the connection

is shoumld works 100%
mine is working in ORANGE no problem
i am with a version V10b, i am waiting the ROM V10f to flash it also

so tell me if it is OK

[laseru]

solution working very well!
Thanks you very much!

[boysana]

Hello,
I tested this manipulation successfully on my KS20 V10b.

Hey rickou26,

just a question, you obviously re-flashed your phone with the extracted ROM? All working well?

Cheers

[boysana]

Hello,
I tested this manipulation successfully on my KS20 V10b.

From the .nv2 file do you reconstruct a .dz file to flash or reconstruct the individual files needed for a non .dz flash?

rickou26

I know you posted specifically about the v10f, would this work for the English language ROM's released?

Kindest regards

PS here is my v10b .nv2 file if it helps for testing purposes

http://rapidshare.de/files/38877519/LGE__20080320142136.XML.html

[rickou26]

@boysana,

This procedure does not allow to extract the rom of the KS20. But the file .nv2 notably contains the sim-unlock ;-).

Hello,

@V10f SFR FR,

For him sim_unlock you have to modify the following key

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WINDIAG]
"Dll" = "windiag.dll"
"Prefix" = "WDG"
"Order" = dword:500
"Index"=dword:1
"FriendlyName" = "Windiag Driver"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WINDIAG\Setting s]
"ServerIP" = "169.254.2.2"
"ServerPort" = dword:9C4
"MaxRetryCount" = dword:32
"RetrySleepMs" = dword:2710
"Enable" = dword:1


@+

[boysana]

Ask those who possess V10f ROM.

1/Configure your KS20 as for of sim-unlock (enable communication in Diag mode)
2/No Activate the sleep mode (the GSM has to remain active not to interrupt Com).
3/Install LGMDP_1_1_.5_Build_12.11_Release (you will find it on GSMFORUM)
4/Launch LGMDP_EURO.exe a window opens and looks for your device. Click Connect
5/Close the first window which opens just after the connection,
6/Then in the main window click Download.
7/The soft creates a file with the extension NV2 (type NV_KS20_20080315-134929.nv2)
7/to Give the file on upload.

Thank.

I thought that when you asked for people who had a v10f that you wanted it for the ROM....
my bad...........

so still no extract solution???????????????????????????????//

[jawad485]

@boysana,

This procedure does not allow to extract the rom of the KS20. But the file .nv2 notably contains the sim-unlock ;-).

Hello,

@V10f SFR FR,

For him sim_unlock you have to modify the following key

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WINDIAG]
"Dll" = "windiag.dll"
"Prefix" = "WDG"
"Order" = dword:500
"Index"=dword:1
"FriendlyName" = "Windiag Driver"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WINDIAG\Setting s]
"ServerIP" = "169.254.2.2"
"ServerPort" = dword:9C4
"MaxRetryCount" = dword:32
"RetrySleepMs" = dword:2710
"Enable" = dword:1


@+

Hi Im a newbee can someone please let me know step by step about how to do this (unlock v10f sfr) aand also if it is successful?
Thank you in advance

[lecirconspect]

excuse me this forum is for unlock lg ks20 operator reseau ? because i dont speak english can you send me this procedure in french please.

[viperlodz]

It works. I'm from Poland.

[lecirconspect]

It's ok for french lg ks20 sfr thanks rockerenator!!!!

[clicmaster]

I've just unlocked my phone !

I want to thank all of you :D:D:D

[decker555]

It works perfectly for a french guy with a K20 on SFR.
You contact me on decker@free.fr for french procedure.
Thanks for this tuto.
regards

Vous pouvez me contacter à decker@free.fr pour explications en français

[con01]

Great.
Unlock KS20 in Polish ORANGE.
Thanks

[retsak86]

Thanks It works :)!!!!

[tasoulis_g]

it is so good.!!!!! i like it

[sensesme]

It worked for me:
KS20 and french SFR.
Now I have it working with spanish Movistar.
Thank you.

NOTE: Original SIM card from SFR was not required.

[szybka_pl]

I have a problem with LG KS 20. Bluetooth License ist ending. After hard rest and no seting time BT like ok.

[dbv002]

TKS...

i want modfiy ROM by cn ,so i go to here.

[nokiafull]

Please post here LGMDP_1_1_.5_Build_12.11_Release.zip, i can't download from rapidshare, it usually die. Thanks

[kostastnt]

Please post here LGMDP_1_1_.5_Build_12.11_Release.zip, i can't download from rapidshare, it usually die. Thanks

http://rapidshare.com/files/100545578/LGMDP_1_1_.5_Build_12.10_Release.zip

Same with build 12.11... No difference in KS20...

[nokiafull]

From the .nv2 file do you reconstruct a .dz file to flash or reconstruct the individual files needed for a non .dz flash?

rickou26

I know you posted specifically about the v10f, would this work for the English language ROM's released?

Kindest regards

PS here is my v10b .nv2 file if it helps for testing purposes

http://rapidshare.de/files/38877519/LGE__20080320142136.XML.html

I can't download from this links, which one more other link, help me

[fourik]

humm çà marche pas chez moi,

L'installation s'est bien passée, les drivers sont installés.

Les manips sur le téléphone aussi

J'ai bien le périphériques LG Corona visible dans le gestionnaire de périphérique windows.

Mais le programme code reader, m'affiche "searching device" constamment.

PS : je suis sous Windows Vista.


Sous vista il faut executer en tant qu'admin (avec un clic droit)

[falabras]

[QUOTE=rockerenator;2023578]## HOT & FREE ## Unlock ALL LG KS20 here ##
[B]
...

drivers:
http://rapidshare.com/files/99459712/LGCoronaUSBDriver.rar

CODE READER :
http://rapidshare.com/files/99459711/ks20.rar
-------------------------------------------------------------
execute application and follow instructions


Hi Rock, I performed all the device menu oprtions and it seems to be working for me (now I can install a Windows Live whereas before I was receiving a "not permission messge).

I am only not sure about the additional Drivers and CODE READER procedures you've mentioned. It's possible you clarify what for they are?

Cheers,
bb.

[nefastero]

Hi,

like some other guys, i don't succeed in acheving the unlock process...

The lg_.exe programme seems to be bloked.
I have all theses messages :

Searching for device......
connecting (COMx)
received first ack...
Getting info
............................

then, then windows disepear suddenly... and process is finished.

I don"t understand how to do ? first steps of process seem to be good.

any suggestion ?

thank you so

Nefastero

[CrossGlaive]

After I installed my ROM I am able to go into windows but it doesn't promite a dialer for me to enter in my unlock code, further more the OPT error comes up.. and the MDP won't pick up my phone even though I have the program installed and I have changed the engineering settings.

[hlacsamana]

humm çà marche pas chez moi,

L'installation s'est bien passée, les drivers sont installés.

Les manips sur le téléphone aussi

J'ai bien le périphériques LG Corona visible dans le gestionnaire de périphérique windows.

Mais le programme code reader, m'affiche "searching device" constamment.

PS : je suis sous Windows Vista.

Utilise WinXP ca marche a 100% . . .

[raykisi]

Hi, CrossGlaive

for flashing the KS20 correctly, pls consult this post:
http://forum.xda-developers.com/showthread.php?t=405945

For unlocking, u hv to type in some number to get into the unlocking menu for you to input your unlocking code, if you dunno the code to enter the unlocking menu, just connect ur phone to lg_.exe in diag mode it will read your unlocking code for you and guide you to unlock as well

[boysana]

Hi,

like some other guys, i don't succeed in acheving the unlock process...

The lg_.exe programme seems to be bloked.
I have all theses messages :

Searching for device......
connecting (COMx)
received first ack...
Getting info
............................

then, then windows disepear suddenly... and process is finished.

I don"t understand how to do ? first steps of process seem to be good.

any suggestion ?

thank you so

Nefastero

ok right now I am exactly where you are, I start the lg_.exe after installing the drivers and then after the start of its operation the DOS window dissapears.

Have you installed a hybrid ROM?

That is why I think this is occuring.

My summary
-Started with french SFR KS20
-unlocked with lg_.exe (successfully)
-got tired of using a french phone so flashed with an unbranded czech ROM.
-got the OTP block because of my original branded state
-my .nv2 file is lost inside a malfunction XP machine
-got a vista laptop
-flashed phone in emergency mode with the hybrid English-HK-10a + French-voda-10f Rom created by Raykisi
-otp block removed and could access the KS20 just could not access the sim as had no .nv2 restored.
-obtained an 'engineered' .nv2 based on my IMEI from raykisi and restored that one.
-phone now recognises sim card as not a SFR sim, network lock message comes up...
-try to run lg_.exe to unlock
-as above lg_.exe does not run...........

So still stuck :)

so my options should be to now???????
- Reflash original sfr rom to take it back to virgin and take it from there (.nv2 prob will still exist?)
or
-Try another engineered .nv2
or
-fix the fucking xp machine to find my original .nv2, or just mount the old lappy's HDD in an external 2.5" caddy to find the .nv2
or
-try another hybrid etc.....

Question, how do I know if the .nv2 restore is corrupt? Will LGMDP show me?

Kindest regards

b

[raykisi]

To use lg_.exe to unlock your phone, you hv to change the setting in engineering menu and install windiag_open.cab again, since you hv just flash with a new rom, all these setting hv been erased.

To make sure you hv correct setting, connecting your KS20 with LGMPD, if it works then your connection setting is correct.

If connection setting is correct but lg_.exe still not working, try reflash the phone and restore the "new" .nv2 file that i hv just sent to you and unlock again

[Boris6]

Help!
cannot flash ENGLISH rom.
After backup rom, it show "Trying to communicate with phone!" and then check.....(xxxx sec) as attachment.
I tried many different ROM and followed all procedures in post.

Anyone knows what happen? Please help!

[raykisi]

This is because your LG Corona USB Driver is not install properly in your computer

try it in another computer with vista prefer, because someone on the formu have the same problem as you b4 and he has 3 different copy of xp in 3 computers still got the same problem, finally i ask him to try vista, problem solved

[brunoargenton]

HEY.. i cant make it..

=/

my model is MS25, from brazil.. same KS20 hardware, except about the 3G, wifi and front cam.. same processor, same everthing!

any sugests?

[bater1]

I also have an MS20 (from Brazil, I often travel there), anyone know how to unlock it?
I tried using the procedure from the first post but got nowehere - i click 2676625720# in my phone dialer but nothing happens, no engineering menu, no nothing 9it treats it as it does any phone number).

any ideas?
Bater

[navee]

I am using LG KS20 french version but i need to change french to english how can i do that please guide me if u know !!!!!!!!!!!!!!

[roman26]

hi,guys.Silly question,but what i should do to soft reset my ks 20:confused:

[pm75062]

## HOT & FREE ## Unlock ALL LG KS20 here ##

read phone code and unlock code (reads only unlock code for ks20) for lg qualcomm
-------------------------------------------------------------------------
Code:

enter code 2676625720#

menu will show, press

Port Setting → 1. Diag Setting → 1. USB Set for Diag → “OK” → “Back”.
(Port Setting → 1. Diag Setting →) 2. USB Switching → “LG Composite -DUN, DIAG”.

press "Done" and reset your device.

drivers:
http://rapidshare.com/files/99459712/LGCoronaUSBDriver.rar

CODE READER :
http://rapidshare.com/files/99459711/ks20.rar
-------------------------------------------------------------
execute application and follow instructions

well, if you find any bugs, please report them here.
don't forget to say thnx to arash and the new :D



Hey guys, I'm not sure what I am missing but I have spent a good 5 hours on 3 different computers, vista and 2 xp's trying to unlock my LG KS20 (unbranded version I think...) but I keep getting this :

searching for device..
connecting (COM16)
received first ack...
Getting info
.....................
and then it comes back to the prompt. What am I missing here? Why is the program not continuing to display the details from the phone?.. so i can use the unlock code.

basically, my problem is that i have bought this phone from some seller on Amazon.com and it was advertised as WIFI unlocked, but the WIFI doesn't even show up in my connections... however, if I look at the hardware, windows shows this .. in "configure network adapters"... "Samsung 2700sWiFi Adapter"... does this mean that my wifi is locked? how do I get this wifi to work ?

thanks in advance for your help.. i've read hundreds of pages and tried many things.. not sure where to go next..

[pm75062]

hi,guys.Silly question,but what i should do to soft reset my ks 20:confused:

hey Roman26, i noticed your question... its easy, just press and hold the power button for 3 seconds.. the phone should give you a message asking to confirm your shutting down... click Yes and you're done.. now push the button again and the phone will restart.. Give it some time as it takes about 20 seconds for windows mobile to restart. if you have a password set up you will be prompted before the unit opens up your windows Today page.

good luck
Paul