TCPMP new VS2008 builds for WM6.1 with FLV built in

[JVH3]

I have TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB installed with TCPMPflvplugin-v0.4.3.cab.

I have run into several flv files that play fine on my laptop, but do not play in TCPMP. It advances across in about 1 second without displaying anything from the video.

I have not run into anything from YouTube that does not play.

I am going to install recomp-01 and try that.

There are still flv files with recom-01 that do not play, but do play fine on my pc, when transfered to my pc.

[JVH3]

There are still flv files with recom-01 that do not play, but do play fine on my pc, when transfered to my pc.

This seems to play them on my Fuze, but the video is choppy:

TCPMP-0[1].72RC1-GF5500Edition-Alpha4.1.CAB

It can be searched for and found on this site.

[Mase_Mase]

This seems to play them on my Fuze, but the video is choppy:

TCPMP-0[1].72RC1-GF5500Edition-Alpha4.1.CAB

It can be searched for and found on this site.

I've tried some of the non working files with this build but have had no luck. Do I need a specific version of Flash Video Bundle? I've used the skunkworks (i think?) and the one provided in this thread. Any other ones I should try?

:confused:

[JVH3]

I've tried some of the non working files with this build but have had no luck. Do I need a specific version of Flash Video Bundle? I've used the skunkworks (i think?) and the one provided in this thread. Any other ones I should try?

:confused:

With this alpha, you shouldn't need any plugins. But, I still do have problems with somefiles. They display 1 frame every few seconds and the audio works. But, if I tap the screen, it refreshes with every tap, so i can continuously tap the screen, and then I can actually view the video more smoothly than just letting it play.

[lbroller]

good stuff.. works great.. i have loved TCPMP since i had my i930 on nextel lol

[arunachalam]

dear milesmowbray,tcpmp recomp playing flv1 videos playing smoothly.flv4 flv6(on2/vp6) not playing.and divx also.I installed flv6 plugin in tcpmp.it installed freely.but when open the player the popup screen says flv6 plugin not compatible with this player.pl upgrade the version.pl do some thing or make tcpmp 0.81 compatible for windowsmobile 6.1.myself and others very thank full to you.I found tcpmp gf5500 alpha4.1 in potegeclub.com.and it work for thoshiba g900.not others.please do something for on2 vp6 in tcpmp.my mobile is samsung omnia.Advance thanks.

[frmariam]

Well there's this one plugin but doesn't work in recomp3...

Files and sources available at:
http://nsft.108shiki.com/soft/

[zeep]

This player is simply awesome! Thanks so much for this. It works great on my Samsung Omnia i900.

(TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB)

Is there a way i can play .wmv files with it too? I really would like TCPMP to be my player for all filetypes.
I don't understand. Does nobody play WMV files with TCPMP?

[frmariam]

Sorry... Post got burried.

Try downloading and puting the 2 dll files from the link in pda \windows folder (just the files, not the folder in the zip!)

http://forum.xda-developers.com/showpost.php?p=1407099&postcount=11

[zeep]

Sorry... Post got burried.

Try downloading and puting the 2 dll files from the link in pda \windows folder (just the files, not the folder in the zip!)

http://forum.xda-developers.com/showpost.php?p=1407099&postcount=11
Thanks!! :)

[megatec45]

I don't understand. Does nobody play WMV files with TCPMP?

I have these dll files for WMV on TCPMP. They have to be copied to your windows folder on you device.
There are 5 files I will have to attach the 5th on another post

Doesn't look like the upload worked. Iwill find another way

[megatec45]

I have these dll files for WMV on TCPMP. They have to be copied to your windows folder on you device.
There are 5 files I will have to attach the 5th on another post

Doesn't look like the upload worked. I will find another way

I had to make the folder a zip file. Unzip from your PC and move to device with active sync, then move to your windows folder.

[itjstagame]

I have the same issue, this player is working great, all the original builds quit on my 6.1 Sprint Mogul, but I'd really be nice to have subtitles.

I found the same plugin: http://handheld.softpedia.com/progDownload/TCPMP-SUBS-Subtitle-Plugin-Download-70382.html That eventually points to here: http://sourceforge.net/projects/tcpmpsubssubtit/ I don't see source listed though.

It asks you to replace the common.dll and while your version of TCPMP kept working fine with their dll I could not get subs to display regardless of settings.

[vanilaguy]

if u really wanna play flv, install youtubeplay:

http://www.databasedevelopments.com/downloads/youtubeplay.cab

[htc_addict]

Is there jus one file I can download and be able to access youtube on my mogul? I have vtap but the quality is quite poor. I would greatly appreciate it!

btw: I have wm 6.1

[vanilaguy]

Is there jus one file I can download and be able to access youtube on my mogul? I have vtap but the quality is quite poor. I would greatly appreciate it!

btw: I have wm 6.1

read above...

[flaviopac]

Any chance to have FLV videos full working on our WM 6.1 devices with TCPMP??

[naren2006]

how to play this link on att tilt.
http://www.musicindiaonline.com/p/x/EsX_UbjyM9.As1NMvHdW/?done_detect

[tyc00n]

I just read this entire thread as I'm having a problem with TCPMP. About every 20 posts, someone asks this question which is the same problem I'm having:


The only thing close to a solution I found was this quote.


Did this ever get solved and I missed it? If so, could someone please point me to the fix? TIA
Is this equalizer problem still unsolved? I'm having the same problem with the equalizer. I'm using TCPMP 0.72RC1 and that's working fine eq enabled, but when I install "TCPMP SUBS SUBTITLE PLUGIN Version 0.6" the equalizer doesn't work anymore (when I enable the equalizer, there is some tremendous distortion and static).

Subs are working fine and that's terrific but now I had to disable the equalizer...

My OS is WM 2003SE.

--edit
I managed to make the original quotes disappear, read the original post by WMguy.

[gnassar]

Hi All,

I've read most of the pages of this thread so I don't think I overlooked something but there's always a chance...

I installed the Recomp v3, and on the Touch Pro I can validate it works with the stock rom. *So happy*. I tried the first video I had, and it turns out to be a Mpeg-2, and TCPMP is throwing the "Mpeg-2 Not Supported" error. *So Sad.*

I thought it was because FFMpeg is missing but it is not. Any ideas?

TIA.
G

[shinetsai]

It is good news to resolve "crash.txt message" problem

[AbuYahya]

First thanks to all who have developed this app.

I downloaded this - TCPMP-0.72RC1-ARM-PPC-recomp-03- and tried on mkv video.

unforetunately didn't play it. it just closes TCPMP down. the file has the player icon so would have expected it to read it.

I am using htc Himalaya, wm6.1 (pdaviet custom ROM)
Both mkv file and TCPMP installed to storage card ?? whether this makes a difference

is able to play the audio when video disabled , but GDI and Raw Framebuffer & Directdraw have same result as above.


are there any mkv & h264 decoder plugin?

if not any other wm6 software that may support this?

I find mkv with h264 encoding give the best file size to preserved quality ratio.

thanks

[savedid]

Just wanted to ask if i would work to put the 2 flv4 codec files in the TCPMP folder. im running the TCPMP-0.72RC1-ARM-PPC-recomp-03
i found TCPMP 0.82 version n tireid it on my omnia but gives Error txt.
i have HH3 firmware . any help?

[Neo+6210]

Excellent..... No other words.
Aahhh and YES Thanks. :)

[rosenhauer]

This version now works on the Verizon Omnia.

Thanx!

[tbaker077]

Why do i keep getting qualcomm qcelp audio codec for .3g2 files. The video works but the sound does not any ideas?

[mpg187]

Okay so I installed this and it works for most codecs. However for AVC/x264 it does the same error, I have a .3gp video that does this (it works on my PPC2003 PDA and when I view the media info it tells me it's H264) but the 3GPs I have from my V-Mate (http://bestwikiever.wikidot.com/V-Mate) that are "MPEG 4 Videos" under the same window.

I have some DivX AVIs that work, and 264 AVIs that don' work, when I try to use the AVC.plg from my other PDA it gives the error no matter what video I load (like before)

[bsw11]

It would be nice if someone built in the display method used in the Core Player. I think the HTC Video player uses it as well - its much faster than TCPMP. It would be nice to bring TCPMP up to date on its video output capability.

[tbaker077]

Why do i keep getting qualcomm qcelp audio codec for .3g2 files. The video works but the sound does not any ideas?
Any ideas please?

[ddeath]

Does not work on my i780 with the official wm6.1 rom build 20270.1.3.1 with version i780PDXHL2. Crashing all the way regardless of video settings.:(

[ishaan_chd88]

1st of all my thnaks to developer:D

it seems my previous codec pack is not workin with this

[tbaker077]

Why do i keep getting qualcomm qcelp audio codec for .3g2 files. The video works but the sound does not any ideas?

Please anyone?

[awbrab]

Is there a way to use TCPMP with subtitles plugins?

Anyway is there any HD user that can use this TCPMP program perfectly fine? I am able to play install and play video but my PLAY, FORWARD, STOP and FULL SCREEN button cannot be seem...but still can press. The Equalizer seem to distort the sound as well.

[zylix]

Pardon me if I missing something, but I like others have been a little confused by the different entries in this thread. Could someone please summarize the best and simplest way to adapt a pocket pc (tilt with the latest ROM) to play YouTube? I sure would appreciate it. I have tried a number of different things and still get a message from TCPMP that there has been an "unexpected program failure -- please send crash.txt..."

Thanks.

[slyaii]

i downloaded this version because my previous version had that crash error.

I installed TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB along side with FlashVideoBundle v1.4.4

I have the samsung phone from verizon (before the omnia) and whenever, i open a fla file from youtube, it opens and closes without given a chance to play...so i downloaded coreplayer...but i want TCPMP to work cuz i can download from youtube and play it too.

[Stryker412]

I've added 4 dll files for Windows Media playback.
wmadecoder 342K
wmadmod 120k
wmsdmod 323k
wmvdecoder 885K
wmvmod 519K
With these files installed to the TCPMP folder, I still can't play WMA files on TCPMP. Is there anything else I need to do?:confused:

Where can I get these files? I want to get playback from Orb but none of the Windows media files are supported.

Edit: Nevermind found them.

[koolvirgo]

I have a Touch Diamond ROM ver 1.93 (original)

Does this software work with the specified version ? Would I just need the TCPMP software or need some other things as well (codecs, dlls etc) to make sure I'm able to run almost all kind of media files ?

Thank you for your efforts,
Kunal

[Mobius Ring]

Finally a 'version' of TCPMP that works. :D

[jffe77]

The Equalizer seem to distort the sound as well.Can someone please advise on solution to the EQ issue. My mine distorts. Thanks in advance for the help.

[Xotic_X_tremist]

Anyone using TCPMP on HTC Advantage X7510?

[Willy Schmerz]

Have anyone tried to use this build on CE 6 device?
Local files seem to work fine, but the streamed video doesn't show anything (e.g. http://news.bbc.co.uk/newsa/n5ctrl/summaries/world/bb/video/world_bb.asx)

[joshep_c]

On my diamond Play and Stop buttons are black and I can't see them. What can I do?????:confused:

[Farmer Ted]

On my diamond Play and Stop buttons are black and I can't see them. What can I do?????:confused:

I have the same issue; not a big deal. Usually you can tap the screen to play, then re-tap to pause (when I say screen, I mean where album artwork/videos show up).

[dornat]

I have this version from china webside.
Working in my HTC Touch (Elf) with wm 6.1
This version with all codec for tcpmp also with flv

http://www.megaupload.com/?d=Z2XLPW02

[Mase_Mase]

I have this version from china webside.
Working in my HTC Touch (Elf) with wm 6.1
This version with all codec for tcpmp also with flv

http://www.megaupload.com/?d=Z2XLPW02

Has someone verified this?

[grafikastudios]

Yep!
Works great on my touch pro!:)

[jffe77]

Can someone please advise on solution to the EQ issue. My mine distorts. Thanks in advance for the help.

Bump, Solution for the EQ issue?

[tyc00n]

Is this equalizer problem still unsolved? I'm having the same problem with the equalizer. I'm using TCPMP 0.72RC1 and that's working fine eq enabled, but when I install "TCPMP SUBS SUBTITLE PLUGIN Version 0.6" the equalizer doesn't work anymore (when I enable the equalizer, there is some tremendous distortion and static).

Subs are working fine and that's terrific but now I had to disable the equalizer...

My OS is WM 2003SE.

--edit
I managed to make the original quotes disappear, read the original post by WMguy.

Bump, Solution for the EQ issue?


I'm still having the same problem too. Now I have two TCPMPs installed (and moved to storage card, and new shortcuts made in the start menu), one with the subtitle plugin installed, and the other without the plugin. So now if I listen to music I use the non-subtitle-plugin-tcpmp with eq enabled... Doesn't of course fix the problem that it's impossible to watch movies etc with both subtitles and eq. :(

[baal_zebub]

hello,

since sourcecode is available: could someone please change the oldstyle WM2003 menu to a WM5/WM6 style softkey menu please ?

thank you very much.

[ronniecr7]

TCPMP-0.72RC1-ARM-PPC-recomp-03 crashed on my omnia i900 when i play flv videos :( any solutions? thanks =]

[dornat]

check other version tcpmp from my post upper

[ronniecr7]

check other version tcpmp from my post upper

it doesnt work on omnia unfortunately, it says the flv file is not verified:confused:

[windowv]

Thank you so much! :D

[vragon]

hi all,
I wanna ask where I can find the source of TCPMP G5500 built,
because I wanna make some modification myself.
thanks:)

[frmariam]

You can't :( For all I know the author never released them. I think the original release thread is this one (http://www.portegeclub.com/forum/viewtopic.php?t=1677&start=0&sid=10062674b905738fd00f51980d28d04d). Sources have been requested but he's been gone for some months now and no anwsers...

The 0.72RC1 recomp3 in this thread is the latest, most stable, unnofficial version with available source. Sourcewise other than this you have a flv1 plugin (http://sourceforge.net/projects/flvstreamtcpmp/), a flv4 plugin (http://nsft.108shiki.com/soft/) (for the last official version) and a subtitle plugin (http://sourceforge.net/projects/tcpmpsubssubtit/)... And of course the last official releases (http://picard.exceed.hu/tcpmp/test/).

Were you planning something cool?

[ronniecr7]

it doesnt work on omnia unfortunately, it says the flv file is not verified:confused:
replying to myself...:p
found the solution, simply install in it 'my device' instead of 'my storage' :)

[nayaknish]

Thenks brother..

I will dwnload and chk this..

if it works.. thenks already said..

if not.. the reason will be said here..

[TekServer]

I know a hundred other people have probably already said this, but you are a lifesaver!
I've had my shiny new HTC Diamond for a little over 24 hours now, and I was devastated when I installed TCPMP and it crashed. WMP Mobile is such carp. I was already looking for an alternative, when I found your recompiled version of TCPMP. Brilliant! With the codec packs, it works better than ever.
Now I can watch all of my ... erm ... assorted videos. ;)

Thanks again, and keep up the good work!
:)

[unknownserv]

Is their a solution to the play/stop buttons appearing black?

[FileFixer]

Is their a solution to the play/stop buttons appearing black?

Try to use Glossy black bar and Black button in player will be correct.

[unknownserv]

Where is that option?

[Mikkael]

Anybody have recompiled version for Win32?

[Riazovic]

Ive installed the file on my xperia x1, however the equalizer is giving a very bad sound, any suggestions to get the equalizer work properly?

[mp3killa]

thanks a mill for this one! saved me hours of trying to find another freeware viewer!

[stephanr]

Thanks, just installed on my HTC Touch Diamond...works great :-)

[Blackpt]

is there a way to run subtitles?

[Djay64]

grrrr someone sent me a link to a cab few months ago to a tcpmp cab.....It was perfect...Played every file, didn't make the screen go all funny colored and worked like a charm.... but I don't know where to find it :(

[dakipro]

Thenks a million, works like a charm

[Azmodan22]

Ok, I have another major issue.

I have managed to install TCPMP (TCPMP-0.72RC1-GF5500Edition-Alpha4.1.CAB) on my gorgeous Samsung Omnia and it work. Well... it can play all the .flv files I tried. (I can send it if someone needs it)

My problem is that it lags SOO much, I am starting to believe it actually converts them to powerpoint presentations !!!! and then lags a bit. :rolleyes:

The only file that it plays right is an On6 FLV6 file with resolution 352x240. Any other file (same codec but higher res) Lags like hell!!. Same thing happens with YouTube play.

However, one Flv file (FLV H.263 codec 720x 480) plays PERFECT on Coreplayer, so I guess the device CAN play them.
The same file lags like hell in TCPMP oy YouTube Play.
But CorePlayer doest not support On2 FLV6 so I can't just settle with that player.

So my problem is....

Either I must find a way to make CorePlayer support On2 FLV6, or get rib of the lag in TCPMP. (apparently CorePlayer has something, TCPMP does not, and I need it:mad:)

Any suggestions?:(
please?
Please please?

(P.S. My window is constantly open after searching for a solution for a couple of weeks...And I live on the 3rd floor......long way down .... just saying...:eek:

[snowcolt]

I got the omnia i910 with wvd which one of these supports that?

[megatec45]

I got the omnia i910 with wvd which one of these supports that?

The version for download in Post #1 will work with most of the video formats except On2 FLV6 codec in which there are no mobile players that support that format that I know of. Make sure you check off the file associations in the preferences menu.

[d_omin]

Hello,
I install this TCPMC but it dosen`t work :( When i try to play some flv movie then program do nothing (black screen), and when push the stop button I receive information that Program cannot find right codec, try download new codec from homepage... :(

(Atom life, PDAVIET ROM WM 6.1 CE OS 5.2.20764 Build 20764.1.4.3)

Thanks for help.

[pajjo]

Hi I installed CAB file on wm6.1 on my omnia.

It installed successfully but when I open the TCPMP player in Programs, i get an error saying "Unexpected Program Failure. Please send "crash.txt" the the developers". Program will now exit.

[wendry_yang]

Very Nice apps, Dude...
I wonder when I can get time and skill necessary to become a developer also, all this time I just play install. Thanks, superb !!!

[xam4]

Hi I installed CAB file on wm6.1 on my omnia.

It installed successfully but when I open the TCPMP player in Programs, i get an error saying "Unexpected Program Failure. Please send "crash.txt" the the developers". Program will now exit.

I have the same problem on my HTC Touch.
What can i do about it?

Edit: I found this version (http://forum.xda-developers.com/showthread.php?t=380387) and it works with Windows Mobile 6.1!

[adamo86]

when replaying on this program after pausing the soun and video start to jerk.does any one know how to fix the problem

[touch-it]

Hi,

I just wanted to say that the recomp-3 is working fine with the Onyx 5.0 Beta 13!

So it should work fine with Windows Mobile 6.5

greetings

[Shodakai]

This is a .cab file right? cause when i got it, it was zipped format

[dj NJoy]

Hi

Sorry if bringing up an old thread, but i need a bit of help, please

I installed the version from the first post on my Ignito (O2 version of Diamond), it didn't work, then i read through the thread, installed FlashBundle, softreset and it worked. However, the first video i tried to play (AVI, 640x480) was REALLY choppy, no matter which mode is used. Why could it be so? It used to work really well on my old Orbit, which was more than twice less powerful...

I seen people saying about additional codecs, installed on top, but where do i get those then?

BTW, many thanks for making it work at all, coz it's a brilliant player

upd: apparently, it wasn't an old thread=)

[adamo86]

tcmp has anyone tryed the amp to increase volume .just want to know will it damage the speaker coz its sounds prity loud

[Lifeworld]

tcmp has anyone tryed the amp to increase volume .just want to know will it damage the speaker coz its sounds prity loud

Increased the preamp by 25. Sound solid. But the equaliser doesn't work. Lots of white noise when enabled. I am using the recomp-3 'tcpmp for wm6.1' for my pda phone i780 wm6.1 pro.
Anyone tried the equaliser?

My old wm5 pda running tcpmp r72 has no problem with equaliser.

[cPT.cAPSLOCK]

This is great :)

Thanks for doing this :D

[bjwebber]

Worked beautifully.

Thank you for your efforts to make this excellent software work on a less than stellar OS (WinMo 6.1).

[walliester]

thanks bro for your time and effort i like this application..

[fred65]

Good work, sounds like a winner, will give it a try.

[rayngm]

Increased the preamp by 25. Sound solid. But the equaliser doesn't work. Lots of white noise when enabled. I am using the recomp-3 'tcpmp for wm6.1' for my pda phone i780 wm6.1 pro.
Anyone tried the equaliser?

My old wm5 pda running tcpmp r72 has no problem with equaliser.

I got the same equaliser issue with my WM5 PPC after upgrading the TCPMP.

[chandnie]

Hi everyone,

I used to have a nokia n95 (symbian OS). that was my first smartphone and now im hooked. anyway my boyfriend recently got me a XDA serra running windows mobile. I love new gadgets, trying to get all the functions working and installing new programs, tweaking it just right so that its perfect for use. However, im having real problems with my new phone playing videos.

All videos im trying to play are .avi files. On the nokia n95 the screen res was 320x240 and the settings on pocket divx encoder worked perfectly. the xda serra has 640x 420 and ive been using the same program with the new pixel setting to encode files for this new phone. However i have spent hours trying to fix the settings so that the movie is not choppy. i even turned off the touch flo 3d thingy. i was using divxplayer, and just now i downloaded the core player on the first post (which works fine) and tried to play a video on there. it still jerky (motion sickness inducing). Im about to give up (it ruined bank holiday monday!) so this is my cry for help. what am i doing wrong?

[cab0]

Never too late to say thank you I hope!

[JaredXIII]

K I'm not all that great at the minute technical details, but I can usually figure out how to install something. Such is not the case with this file, though. I'm running an Omnia i910 with wm6.1, and I was able to install the basic TCPMP for 6.1 with no problem, but no matter what I do I cannot play flash files. I'm not trying to get them from Youtube or anything, just playing files I have saved on my device. I've tried every different setting, I installed the flash plugin and put the files in the root folder, and still nothing. How exactly is this new build installed anyway? When i dl the file and unzip it, there's hundreds of files in dozens of folders, but no CAB or even EXE files as far as I can find. maybe I'm missing something really obvious (god I hope so i'm getting pissed....) can anybody help? :confused:

[GeLopez]

K I'm not all that great at the minute technical details, but I can usually figure out how to install something. Such is not the case with this file, though. I'm running an Omnia i910 with wm6.1, and I was able to install the basic TCPMP for 6.1 with no problem, but no matter what I do I cannot play flash files. I'm not trying to get them from Youtube or anything, just playing files I have saved on my device. I've tried every different setting, I installed the flash plugin and put the files in the root folder, and still nothing. How exactly is this new build installed anyway? When i dl the file and unzip it, there's hundreds of files in dozens of folders, but no CAB or even EXE files as far as I can find. maybe I'm missing something really obvious (god I hope so i'm getting pissed....) can anybody help? :confused:

have you associated tcpmp to play flv files?

[JaredXIII]

yup I've done that, and even tried the option suggested by another in this thread to also associate it with MMS protocol, and still nothing. I get the infamous black screen, sometimes with sound, and then the "video codec not supported blah blah blah...." error message when I press stop. In the time since i posted, I also uninstalled everything and reinstalled just for kicks, but still nothing.....

[megatec45]

K I'm not all that great at the minute technical details, but I can usually figure out how to install something. Such is not the case with this file, though. I'm running an Omnia i910 with wm6.1, and I was able to install the basic TCPMP for 6.1 with no problem, but no matter what I do I cannot play flash files. I'm not trying to get them from Youtube or anything, just playing files I have saved on my device. I've tried every different setting, I installed the flash plugin and put the files in the root folder, and still nothing. How exactly is this new build installed anyway? When i dl the file and unzip it, there's hundreds of files in dozens of folders, but no CAB or even EXE files as far as I can find. maybe I'm missing something really obvious (god I hope so i'm getting pissed....) can anybody help? :confused:

Besides making sure of file associations, the player (or almost any PPC player) does not support On2 VP6 codec or FLV4. There have been some other pluggins created for these, but the video is very slow and choppy at best.

[JaredXIII]

Besides making sure of file associations, the player (or almost any PPC player) does not support On2 VP6 codec or FLV4. There have been some other pluggins created for these, but the video is very slow and choppy at best.
some of my vids were flv4 but most are plain flv, yet they still wont play. like i asked before, how is the new build installed, since theres no cab file?

[megatec45]

some of my vids were flv4 but most are plain flv, yet they still wont play. like i asked before, how is the new build installed, since theres no cab file?

Post #1 has the cab at the bottom in a box. You can't miss it! It's in a ZIP file, you download it to your PC, un-zip it, the cab file is there and transfer it to your phone via active sync.:)

[Kilek]

milesmowbray, thank you...it solved my troubles in wm6.1 on LG GM730 also..

[jffe77]

Has there been a fix on the EQ issue for WM 6.1 yet.

[Takonic]

alright, im looking forward to a media player!, So I got it working, but is there a way to force the videos being played (avi) to be played horizontally instead of vertically? I got anime..and trying to read the subs vertically is eye sore ;/

[sucro]

tnx very much man

[Wokoloko]

hey folks,

I did not find any solution for that "black buttons" issue.
The buttons are still black and only visible if pressed.

I have attached a screenshot.

Any ideas?

Ciao
Woko

[FileFixer]

You must change color for top and bottom taskbar to another and your black buttons go away.
UITweaker is best way to change system color.

[thintin]

Hi.

I've installed the TCPMP from post #1 on my Advantage X7510 (WM6.1 -O2 ROM) and it works, but the performance is much lower than the TCPMP I was using on my Universal (WM5 O2-ROM). I've tried a few different files (.avi .mpeg etc) and they all seem quite jerky and slow.

Is this due to the player or the codec?

Appologies if this has already been answered, but with 35 pages in this thread it takes some time to find things, even with the help of the search engine.

Thanks.

[thintin]

Hi.

I've installed the TCPMP from post #1 on my Advantage X7510 (WM6.1 -O2 ROM) and it works, but the performance is much lower than the TCPMP I was using on my Universal (WM5 O2-ROM). I've tried a few different files (.avi .mpeg etc) and they all seem quite jerky and slow.

Is this due to the player or the codec?

Appologies if this has already been answered, but with 35 pages in this thread it takes some time to find things, even with the help of the search engine.

Thanks.

[simonGsez]

On my Loox 718 the benchmark says 176%, on my td2 36% :-(

I solved the problem with the black buttons with XN Resource Editor.
Open the file interface.plg und change the bitmap in the folder Bitmap\114 (or 112).

[nothin]

On my Loox 718 the benchmark says 176%, on my td2 36% :-(
xscale vs shit, it's normal.

the performance is much lower than the TCPMP I was using on my Universal
..and again.

[jeff_hwang]

Guys, go to www.convertflv.biz (http://www.convertflv.biz)to enjoy yourself.

[FileFixer]

That solution is not the point of this thread.

[funkus]

have come back to WM after a breif affair with the iph*** and first issues i get bring me straight back here for yet another simple solution. Thanks for solving my problems once again, keep up the good work . funk

[doozerbob]

recompiled cab installed a treat on zest running windows 6.1 and can play all files......except flv!!!! when i try to open one it says " player.exe *edit just checked and it says device.exe* has encountered a problem" then gives me the option to send error report. it used to work fine on my xda mini s
any clues? :confused:

GOT IT TO WORK!!!!! installed the flash video bundle and can now play all my dodgy eddie izzard flv files *GLEEEE*

[francia78]

bonjour, ça marche sur mon HTC HD mais des saccades à partir d'une vidéos prise sur mon canon ixus 860. La vidéo passe mieux en optimisant le cache ça saccade toujours encore un peu.

[jiteshshahin]

I have been playing around getting TCPMP to compile in VS2008, it now builds and runs.

These new builds have 2 main advantages over the original builds:

1) They run on the latest Windows Mobile 6.1 ROMS where the original build crashes (crash.txt message).
2) They support the FLV format straight out of the CAB.

On the Kaiser you must use 'GDI' or 'Raw FrameBuffer' for decent

CAB Download


Hi,

I have installed the 03-recompiled version. Works rock solid on avis and flvs. However it simply refuses to work with youtube. A message "Could not open URL" keeps popping up...

Any solution? What is the cause?

[rambo6]

Hi,

I have installed the 03-recompiled version. Works rock solid on avis and flvs. However it simply refuses to work with youtube. A message "Could not open URL" keeps popping up...

Any solution? What is the cause?

I have had the same problem. TCPMP will not open and run most Youtube videos anymore. I think Youtube changed its format so TCPMP doesn't work anymore.

[megatec45]

I have had the same problem. TCPMP will not open and run most Youtube videos anymore. I think Youtube changed its format so TCPMP doesn't work anymore.

Try Youtube Play, search the forums.

[hit2000]

where can I get MP3.plg source code?
And how to build it?

[invario]

I have had the same problem. TCPMP will not open and run most Youtube videos anymore. I think Youtube changed its format so TCPMP doesn't work anymore.Sad because the FLV is much higher quality than the RTSP type stream....

I don't think it's that youtube changed their 'format'... It's that they added more parameters into the URL, so that TCPMP gets confused and can't parse out the entire URL properly.

[invario]

I FIGURED IT OUT!!! After much hard work, I've figured out the problem, but I don't know how to fix it. Maybe someone more knowledgeable than myself can actually FIX it now though....

For those that don't know, the way PIE works with TCPMP is that PIE creates a video.m3u file inside \PROGRAM FILES\TCPMP which TCPMP then opens. video.m3u contains the URL of the FLV file that you pull off from youtube... (m3u files are simply playlists)

Since youtube changed the format of its URL, it has gotten significantly longer.

TCPMP has a hard limit of 256 bytes (characters) on the URL. So, what happens with the new URL is that it often exceeds the 256 byte limit, and TCPMP will only read it UP TO the 256 byte. Anything after 256 bytes is LOST and that's why you get "could not open URL"

Example:
Youtube video of half life live action thingee:
http://v15.lscache4.googlevideo.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag&itag=5&ipbits=0&sver=3&expire=1243450800&key=yt1&signature=0FD79ABE8B1527FBDCCA117F163434544DD5226F .412B317466B85C5F1DEC05B615B47F264F845325&id=ab550f304982a99aLength = 263, I get the error. Can't play video.

same video, but instead, I edited the video.m3u file and manually resolved the domain name (v15.lscache4.googlevideo.com = 74.125.167.35)

http://74.125.167.35/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag&itag=5&ipbits=0&sver=3&expire=1243450800&key=yt1&signature=0FD79ABE8B1527FBDCCA117F163434544DD5226F .412B317466B85C5F1DEC05B615B47F264F845325&id=ab550f304982a99aLength=248 and the video plays

I'm going to look into this further....

edit: I downloaded the source, but I have no idea how to even begin (as I'm not a programmer...) I believe the relevant file is interface/win32/playlist.c but I'm not sure if that's the only one.

[invario]

I've found the solution!!!!!!

I took the OP's source (first post), opened it in Visual Studio 2008 (freaking 3GB download from MS!!) and started snooping around.

Modified the following files:
interface/win32/playlst.c -> replaced all values of '256' with '1024'
interface/win32/win_win32.c -> replaced all values of '256' with '1024' (except the one that says 256*1024... on my source, it's line 2598)
common/portab.h -> replace MAXPATH 256 with MAXPATH 1024 (line 260)

The resulting files are now here! -
http://rapidshare.com/files/237840222/tcpmp-0.72rc1-fixed-youtube-05-27-2009-invar.rar

The bad news is this:

- I have no idea how to put stuff into a self install CAB, so the file I uploaded to rapidsdhare is ONLY the three files that were necessary. You MUST install a CAB version of 0.72RC1 from elsewhere (preferably the same version in this thread that was posted.)

- Also, the version of 0.72 RC1 I used does NOT install the PIE videoloader.dll (aka flashvideobundle), so if you completely uninstalled any preexisting version of TCPMP and installed the one posted here, you MUST reinstall flashvideobundle which is not really a problem, just an extra step. Here's a link for it! (google for 'flashvideobundle 1.4.4' if the link dies... there are plenty of sites)
http://handheld.softpedia.com/get/Video/FlashVideoBundle-64991.shtml


Anyway, if someone knows how to package this into a CAB or something, feel free to go ahead and do it and then post it. It appears to be working great so far, and I hope I didn't screw anything up.

Feedback appreciated!

[abyssfox]

I wonder why tcpmp will crash with old build? Now I'am using Wince 6. There is still have the same problem with the new build.Could you please give me the point?

[jiteshshahin]

[Invario]

Thanks for the bug-fix tip. I will upload a recompiled/tested .cab version of TCPMP player soon.

[frmariam]

[Invario]

Thanks for the bug-fix tip. I will upload a recompiled/tested .cab version of TCPMP player soon.

Since you're going to do a recompile could you also do apply this fix to the subtitle plugin (http://sourceforge.net/projects/tcpmpsubssubtit/)? The compiled files consist on a modded common.dll and interface.plg...

[invario]

no can do. it doesn't appear to be as simple as i thought it'd be. i tried, but no go. sorry.

[invario]

scratch that. i figured it out. give this a shot. don't hold me responsible!
www.crimetank.com/misc/tcpmp-subtitle.rar

[frmariam]

Thanks man :) It's working great!... well as good as the plugin does.

This compile has an issue that the original plugin also has (which is normal). The original plugin has this issue in which the Titlebar from the TCPMP GUI randomly disapears after you open a new file using the TCPMP file browser (even though it's checked in "Functions">"View">"Titlebar")... If this were an inependent subtitle.plg (rather than a common.dll and interface.plg mod it'd be a lot better...). I'll see if I can get in contact with the author about this.



Anyway since you did a recompile I don't know if you may be interested in the following. I found this mod that adds support for Pocket Scrobbler. But more important it also has a file that supposedly fixes an issue with some unicode characters in ID3v2 tags (I couldn't confirm this). If you're interested this site (http://www.derkarl.de/) constains the modified files.

[Zildjian]

YouTube also has their own player now that's not too bad. It's designed for the phone, so it fits perfectly and streams great. I love the TCPMP player especially because of the EQ, but I figured I would just mention the YouTube player designed by YouTube.

[geoponer]

I had a problem watching movies with external subtitles (not embedded) on my HTC Touch Cruise (Polaris). I originally had TCPMP v.0.71j but the subs plugin was not compatible with that version. Then I tried 0.72RC1 found on the web and 0.81 but both version crashed at startup!

Thank God I found the link to this thread in the subtitle plugin (http://sourceforge.net/projects/tcpmpsubssubtit/) .zip file! This version works great on my Polaris (GDI video selected), the subs load automatically and of course there are no crashes!!

Thank you Mr. milesmowbray, you've done a great job!!

[wow_boy]

Hey

I have the HTC Diamond 2 and when i install TCPMP it starts up, but when i open a file the whole phone freezes :confused:

Can someone help me

Thx

[kenobyR]

I want to cry how happy I am to find this.... You would expect that for WM there is a bit more open source alternatives. THANK YOU VERY MUCH!!!

[fraser]

Has anyone had any success on the Touch Pro 2? On loading TCPMP the gui is corrupt (missing icons). On playing a file there is sound but no video and the display does not go full screen. Screen taps will pause the video as normal but the rest of the gui is unresponsive. I suspect there is a defunct window layer covering the display. A soft-reset it the only way to get the device back to normal.

[htchris]

Hey

I have the HTC Diamond 2 and when i install TCPMP it starts up, but when i open a file the whole phone freezes :confused:

Can someone help me

Thx

same problem whith mine htc diamond2.
i wonder which version is the true one for diamond2?
anybody knows?

[apple12345]

I have exactly the same problem with my Touch Diamond2 :confused:

[invario]

try using this instead:
http://forum.ppcgeeks.com/showthread.php?t=59820

[y-master]

nice work !
it perfect read flv and mpg on my touch dual.
thanks a lot ;)

[foxm]

hello guys!

i have 2 questions!

1. is that version in the first post the latest one? i found a thread with version 0.81?! here (http://forum.xda-developers.com/showpost.php?p=1760424&postcount=3)

2. how to watch wmv files? (:

thx a lot!!

bye

edit:

ad1) the 0.81 doestn work on my phone

edit2: btw big thanks to milesmowbray!!!

[xboomer55]

2. how to watch wmv files?

http://forum.xda-developers.com/showthread.php?t=298126

[jimbosiu]

Hello guys,

May anyone get TCPMP RC72 work without crash on Touch Dia 2?

Many thanks:confused:

[fingerstoo]

2. how to watch wmv files?

http://forum.xda-developers.com/showthread.php?t=298126

I think I know why you cannot watch wmv files.... MS changed the name of two WMP files (maybe others?) when they moved from WM5 (in the original TCPMP development) to WM6. Because the two files have been renamed TCPMP cannot find them. The files you need to copy into the Windows folder are wmv.decoder.dll and wmadecoder.dll. I think you can download them from this forum, somewhere - search? The first file is used by TCPMP to play video .wmv files and the second to play audio .wma files.

[Milan Udir]

It works on my HTC touch HD it even play FLVs. The trouble is it won't rotate which makes it useless with such screenestate. I tried GSEN with different options. But it worked only in a funny situation where I first rotated 'Today' in landscape (the right side becomes garbage) and launch TCPMP, with 'follow GUI' checked.
Anybody any solution ? thanks

[foxm]

2. how to watch wmv files?

http://forum.xda-developers.com/showthread.php?t=298126

thx dude! but i found that thread already, and it seems to work, but the video has very very slow playback! i tried the same video by using the built in wmp and there it works! but not as fast as i want to! it seems to be laggy... but only wmv files!

I think I know why you cannot watch wmv files.... MS changed the name of two WMP files (maybe others?) when they moved from WM5 (in the original TCPMP development) to WM6. Because the two files have been renamed TCPMP cannot find them. The files you need to copy into the Windows folder are wmv.decoder.dll and wmadecoder.dll. I think you can download them from this forum, somewhere - search? The first file is used by TCPMP to play video .wmv files and the second to play audio .wma files.

thx u 2! i thought i am going to ask for the dll files because i didnt know that this files from the thread above are the latest ones!

so long

[fingerstoo]

thx dude! but i found that thread already, and it seems to work, but the video has very very slow playback! i tried the same video by using the built in wmp and there it works! but not as fast as i want to! it seems to be laggy... but only wmv files!



thx u 2! i thought i am going to ask for the dll files because i didnt know that this files from the thread above are the latest ones!

so long

I know it is convenient to play native wmv files, but after a lot of experimentation I came to the conclusion that the majority of wmv files do not play well in TCPMP. Some do, but not all. It depends on the sampling rate and other factors. I usually use DVD Catalyst (Google it) to turn them into VGA DiVx files which always play superbly on TCPMP. It is worth the small investment in DVD Catalyst just to perform this codec conversion. All wmvs can be converted and they play flawlessly and fast. I have been through several upgrades of DVD catalyst and the author, Mitch, is very helpful if you have any problems. It will also convert DVDs, oops, there I said it, but I never use that, now do I?

[iLLa]

by far sickest post ive seen about tcpmp. it has the newest version that works and doesnt crash. they are working on the newer version as well. not to metion this has all know codecs built in. right here. http://forum.ppcgeeks.com/showthread.php?t=74407&highlight=tcpmp

[-Jonny-]

nice find iLLa, thanks.

[saran0410]

Installation ok on my SAMSUNG i-780.
But unable to play all files, even some mp4.
mkv files if attempted it closes automatically

[rxl]

Hi, i just bought an HTC touch Pro2 and TCPMP dosen't work!.... until I found this thread!! ;) now it works just fine! tanks once again... :D

[diablodelaguarda]

HI, I can't found the dlls avcodec-51.dll and avutil-49.dll :'(

[kpc1]

Hi, i just bought an HTC touch Pro2 and TCPMP dosen't work!.... until I found this thread!! ;) now it works just fine! tanks once again... :D

Hi rxl, I haven't got it to work on my Touch Pro2. Could I trouble you to please say what exactly you installed?
Many thanks,
Kevin

[Wave.]

I have a Lg Ks20 8 Gb Micro SdHc

I installed TCPMP succesfully but when i want to play a file it Lags very heavy, do someone know a solution for it.

Thank you

[madone_2k3]

Thanks for this. It worked on my Kaiser ROM build 3.29.206.0
:D

[costinhas]

Hi rxl, I haven't got it to work on my Touch Pro2 either. Can I ask you to please say what exactly you installed to make it work on yours?
Many thanks,
Costinhas.

[madferret]

Hello guys,

May anyone get TCPMP RC72 work without crash on Touch Dia 2?

Many thanks:confused:

I'm using the PPC Geeks version mentioned a few posts back on my TD2.

Even with that version AVI files were freezing until I deselected video Direct Draw and checked Raw video buffer.

[sentinel159]

After three months searching i knew some would come up with a fix for this and i thank you :)

[redherring728]

I've seen a few people say they've solved the equalizer problem, but I haven't seen any solutions or updated .cab files... How do I fix that?

[Pathos]

After three months searching i knew some would come up with a fix for this and i thank you :)+1 Thanks, iLLa

[gemblaster]

Hello, and thanks for this newer TCPMP for the 6.1 and up roms.

I seem to have a small problem running this TCPMP on my Hermes 8525 using CRC's latest stable ROM 13.4:(. The title bar and menu tabs are totally black, I can not see the fonts or icons. They still work if I press the areas (as I have used TCPMP up till now), but this is really not the way it is supposed to work.

Does anyone have this same problem, or can tell me how to fix this please:confused:?

Thank you very much.
Gem

[fingerstoo]

Hello, and thanks for this newer TCPMP for the 6.1 and up roms.

I seem to have a small problem running this TCPMP on my Hermes 8525 using CRC's latest stable ROM 13.4:(. The title bar and menu tabs are totally black, I can not see the fonts or icons. They still work if I press the areas (as I have used TCPMP up till now), but this is really not the way it is supposed to work.

Does anyone have this same problem, or can tell me how to fix this please:confused:?

Thank you very much.
Gem

It is because of the start screen or "today" theme. Some of the colour settings mean that what should be two different shades of gray/black are the same that are used by TCPMP. The Black theme used by HTC has this problem.

Try changing the theme and the problem should disappear?

[gemblaster]

It is because of the start screen or "today" theme. Some of the colour settings mean that what should be two different shades of gray/black are the same that are used by TCPMP. The Black theme used by HTC has this problem.

Try changing the theme and the problem should disappear?

Amazingly SMART answer my friend:D!! You where totally right on the money! I THANK YOU SOOO much! I would never have thought about the today screen conflict, unless I fluked out and changed it in the near future while trying to find a working TCPMP. I really liked my today screen though, so that wouldn't have happened, hence my delema that is now OVER!

THANKS again VERY much.

The trouble screen is called Diamond_v2.0b downloaded through CRC's device update, on rom 13.4. MAJOR conflict between this today screen background and TCPMP. You can have the same background with NO conflict called Flat Black through same Device Update;).

Gem

[fingerstoo]

Amazingly SMART answer my friend:D!! You where totally right on the money! I THANK YOU SOOO much! I would never have thought about the today screen conflict, unless I fluked out and changed it in the near future while trying to find a working TCPMP. I really liked my today screen though, so that wouldn't have happened, hence my delema that is now OVER!

THANKS again VERY much.

The trouble screen is called Diamond_v2.0b downloaded through CRC's device update, on rom 13.4. MAJOR conflict between this today screen background and TCPMP. You can have the same background with NO conflict called Flat Black through same Device Update;).

Gem

'twas nuffin.....

I spend a lot of time playing with making themes and stumbled on this. I like TCPMP too and also used it for years. But I also use S2P (see other threads) from A_C. I use TCPMP for video, and S2P for audio only files.

[darkman088]

Hello,

I have downloaded the 13 MB megapack version of TCPMP. I don't know if somebody else experienced this problem, but I'm again getting the error that the plugin is not compatible with this version of TCPMP and I have to upgrade. Now I am going to try to find version R81...
I also tried TCPMP GF5500 edition and it works perfectly on my diamond. It opens movies with AC3 format sound and it also opens .flv files. Without any additional codecs.
Here is the place to say, that I am experimenting with 2 FLV files. The smaller one, 320x240 resolution plays flawlessly, the other one lags heavily. So I think that whoever here is complaining about lagging, should try with smaller .flv files with a worse resolution. PPC CPUs are still not good enough :-( Even > 500 MHz...

[ukdutypaid]

The .cab on pccgeeks won't download, but the .exe does. I've deleted the Skunkworks flash bundle and, TCPMP now seems to be happy (10 mins in with it at the moment)... Also, also it's actually happy on the SD card.... Ah the promised land....

Ooo, some of you people are clever.. and we the ones who aren't, are grateful..

[peerke1987]

Hello,

I've just bought myself a new T-mobile version of the HTC Touch Pro 2. It still has the standard rom and firmware.

I'm stepping on the plane the monday, so i thought i need a few movies to enjoy myself. Now when i was looking for good players i found the TCPMP.

I've installed your latest version but it keeps crashing, It crashes when i open a video file (no matter what file as far as i know). But the sounds keeps go on in the background and the sound has good quality. But i dont see a picture. Sometimes its stays pitch black and sometimes it shows a crashed video picture (with al the colloured pixels)

The bottom bar stays in my device at all times, and it stays there untill i reboot my device. Does someone has a solution for this?

Please help

[gemblaster]

Hello,

I have downloaded the 13 MB megapack version of TCPMP. I don't know if somebody else experienced this problem, but I'm again getting the error that the plugin is not compatible with this version of TCPMP and I have to upgrade. Now I am going to try to find version R81...
I also tried TCPMP GF5500 edition and it works perfectly on my diamond. It opens movies with AC3 format sound and it also opens .flv files. Without any additional codecs.

Would you mind giving me the URL's to the 13MB megapack TCPMP, and the GF5500 Ver. please? I would love to be able to use use those as well:).

As for Ver.81 you were looking for try the links below, should work a treat my friend:cool:!

http://www.4winmobile.com/forums/phone-edition-general/10022-tcpmp-qvga-v0-81-unofficial-hybrid-media-player-all-codecs-here-updated-17-12-08-a.html

& here:

http://www.4winmobile.com/forums/phone-edition-general/10022-tcpmp-qvga-v0-81-unofficial-hybrid-media-player-all-codecs-here-updated-17-12-08-a-31.html#post232289

GB

[peerke1987]

Well i think i got it working,

I got the Altered Version on page 39, uninstalled the version 3. And installed the altered one.

I Switched the DirectDraw To Raw frame buffering and it worked.

Im gonna try the version 3 and use the same configuration and try again.

Thanks

EDIT: With the Raw Frame Buffering its sometimes a bit low on FPS. When i use GDI i looks like its better

[sucro]

Did somebody try to set plugin for subtitle option in TCMP , and which version of tcmp is needed for subtitle plugin? I tried with suggested 0.71 RC - latest officially version, and i did everything suggested in readme, like adding 3 files from subtitle.zip for tcmp in installation folder of tcmp player, and i could see subtitle - menu in TCMP, but it didn't load subtitles, from movie folder, where is places subtitle file .SRT with same title like movi file (.avi) , i tried another .avi file - movie , but same thing ? !

Please if somebody suceed to do this , share it with us ?


Tnx,

greetz

[XA Hydra]

I know this is hardly a pressing issue, but hopefully isn't hard to implement either.

Any chance of 128dpi (320x320) friendly icon sizes added to the executable? The icons are quite jarring for those of us with a Treo or Epix... I know there is a VGA 96dpi patch but it just doesent feel right to me. Sometimes the little things really affect the experience.

[FDPM]

Well i think i got it working,

I got the Altered Version on page 39, uninstalled the version 3. And installed the altered one.

I Switched the DirectDraw To Raw frame buffering and it worked.

Im gonna try the version 3 and use the same configuration and try again.

Thanks

EDIT: With the Raw Frame Buffering its sometimes a bit low on FPS. When i use GDI i looks like its better

I went through 40 pages of this thread before I found your useful hint! I added it to the wiki page!

Regards,

[EssZed]

Hi folks,
my htc touch pro 2 (ARM, WM 6.1) works well with it, but unfortunately no support of *.flv or *.mpeg-2.
Any suggestions? I would appreciate your assistance.

[EssZed]

Hi,
in addition to my above posting.
Have I to change the preferences?
Any hints to solve my problem?
Have fun.
EssZed.

[Aitoh]

When tcpmp starts it doesnt show the play/pause/stop and the options and file buttons, but I can click them. But I can't play videos, with the flv it said no codec found, and when I play an mp4 my mobile freezes.
I have and HtC touch pro2 with wm 6.1

[smanojg]

thanks dude, this was really a great piece of info,any chance of playing .flv on this player.

[rosado1013]

I could get the equalizer to work by defining FIXED_POINT (either as compiler flag /D "FIXED_POINT" or directly in common/fixed.h)

Can you explain how you did this, you can enable the equilizer and adjust it whitout the cracin noise ?

[DarkAngelFR]

Hey there!
I've been using your builds for some time on my diamond and it was really nice...I tested on my raphael and on many video (divx encoded) it's pretty slow, got lots of video/sound stop (sometimes just video, sometimes just sound...). But it's more "speed" problems because of my SD card and the video resolution I think...
Then I have 2 questions :
- As a developer I opened the source code to see a little how the display is made. I would like to make the screen working on my raphael using WM6.5 builds....buttons are too small (something like 1 or 2 pixel for "play/stop" buttons)...it's pretty hard to change this lol but I'm on my way
- Do you know a free/easy video resolution converter ? to make my video smaller (not necessary re-encoder since tcpmp reads nice divx)

Last question : is there a SVN somewhere ? so I may get latest and maybe even push updates (graphics only to have those buttons visible on my raphael device)

Thanks for the great job!

[woomg]

Did somebody try to set plugin for subtitle option in TCMP , and which version of tcmp is needed for subtitle plugin? I tried with suggested 0.71 RC - latest officially version, and i did everything suggested in readme, like adding 3 files from subtitle.zip for tcmp in installation folder of tcmp player, and i could see subtitle - menu in TCMP, but it didn't load subtitles, from movie folder, where is places subtitle file .SRT with same title like movi file (.avi) , i tried another .avi file - movie , but same thing ? !

Please if somebody suceed to do this , share it with us ?


Tnx,

greetz


Hi scuro,

Please use this file, replace original files with it. And set video mode to "GDI" not directx or others.

http://sourceforge.net/projects/tcpmpsubssubtit/files/tcpmpsubssubtit/0.63%20Beta/SUBS063WM61.zip/download

Goodluck!
woomg

[sucro]

Hi scuro,

Please use this file, replace original files with it. And set video mode to "GDI" not directx or others.

http://sourceforge.net/projects/tcpmpsubssubtit/files/tcpmpsubssubtit/0.63%20Beta/SUBS063WM61.zip/download

Goodluck!
woomg


Hello Woomg, tnx on your advice, but this didn't work for me, and my HTC diamond !?

Did you test it with HTC Diamond? Is it important when i set video mode to "GDI", before or after copying files from SUBS063WM6.1.zip ?

Inside .zip file, are 3 files in WM6.1 folder, and COPYING .txt file inside archive, do I need to copy copying.txt file?

I try everthing but same result, when i put subtitle plugin, TCMP can't start, nothing happen !?

If somebody has a good expirience with working subitlte plugin for TCMP, and HTC Diamond, plase share that with us?!

Tnx in advance!

Sucro


p.s.

Now i fixed it, and works lik a charm :)! Big tnx for your advice! I did wrong, cause before i put - ati3200.plg & intel2700g.plg in install folder, my fault , cause they are not necessary for HTC Diamond + TCMMP with working subtitle plugin :)

For all you, this is what you have to do for working subtitle in HTC diamond + TCPMP version from first page of this thread

1. Install TCPMP - 1 page

2. Download this subtitle plugin for WM6.1

http://sourceforge.net/projects/tcpmpsubssubtit/files/tcpmpsubssubtit/0.63%20Beta/SUBS063WM61.zip/download

3. Unpack, and put 2 files from unpacked folder - \SUBS063WM61\WM.6.1 , called COMMON.DLL and Interface.plg, to the same directory you have installed TCPMP 0.72

These files must be replaced:
- common.dll (changes some video drivers to add subtitle support)
- interface.plg (adds the Subtitle control menu)


Some other files are not necessary if your device does not support Intel 2700 or ATI 3200 drivers.
- ati3200.plg
- intel2700g.plg - these file are not necessary for your HTC DIAMOND, don't copy these files in installation folder of TCPMP!


4. If your language is not English, you may need to change your system encoding.
Select "Settings->System->Regional Settings" from the Start Menu and then choose your language.
It will help if you see strange symbols in subtitle text instead of the correct ones.

5. Now start TCPMP 0.72. You will see some changes in interface:
- A new page of settings where you may change font name, size and boldness, disable
subtitles completely or change their speed.
- Options->Subtitle submenu in the main menu. It allows opening a new subtitle file,
to switch between several subtitle streams and also to change speed.
- A hotkey for subtitle stream switching in Settings on the Hotkey page

6. Using the plugin

You may copy subtitle files to the same folder where the films are located.
The plugin will autodetect subtitles which names begin with the film name when you click the "Play" button:
filmname.srt
filmname.eng.smi
...
etc


Good luck!


Greetz Sucro

[SGH-i200]

These new builds have 2 main advantages over the original builds:

1) They run on the latest Windows Mobile 6.1 ROMS where the original build crashes (crash.txt message).
2) They support the FLV format straight out of the CAB.


recomp-03 doesn't play flv nor mp4 on my Samsung i200 (WM6.1).

There is no crash.txt message. The tcpmp window opens and closes again without showing anything of the video.

Any tips?

---

SOLUTION: I deleted ffmpeg.plg and installed flvffmpeg.plg (http://sourceforge.net/projects/tcpmpflvplugin/#). Now FLV are playing well! :-)

Of course after deleting ffmpeg.plg TCPMP doesn't plays MP4. But that's no problem since my i200 has another video player on board for that files.

[sucro]

recomp-03 doesn't play flv nor mp4 on my Samsung i200 (WM6.1).

There is no crash.txt message. The tcmpm window opens and closes again without showing anything of the video.

Any tips?

That's version is for ARM processor, not like your one i200, with slow 264MHz processor!

[SGH-i200]

That's version is for ARM processor, not like your one i200, with slow 264MHz processor!

Right: It has a slower processor since it is a smartphone - but it is still an ARM processor!

This Recomb.3 opens and plays all the other formats like 3gp and avi without problems.

mp4 and flv worked also at one point. But I don't remember what I changed since then...

UPDATE: Found solution. (http://forum.xda-developers.com/showthread.php?p=4445726#post4445726)

[donwonlee]

figured it out. this forum is lots of help

[davidhclee]

Installed the recompiled TCPMP on a new Samsung BT7320 with WM 6.1 and playback worked. However when I quit the program, the video screen display overlay stays on for about 2 to 3 secs before going away. Seems the code takes a while to be released. It's so irritating, I uninstalled it. Anyone with same observations? BTW, I have previous versions on TCPMP working nicely on i600 (WM 6.0), i780 (WM 6.1) and Treos 600 and 650.

[davidhclee]

The recompiled TCPMP worked on my new Samsung Omnia Pro BT7320. However, when I quit the program, the display stays on for 2 to 3 secs before going away. Anyone with same observations?

[liquid_vibes]

Thank you!!!

[kli]

I had the crash.txt problem on my HTC diamond (WM 6.1 or 6.5). After installing the customized TCPMP here, it works really well now. Thank you!!!

[cab38]

thanks a lot for that

[balegant]

I was a Late adopter of WM 6.1, and upgraded without a problem till i went to watch a movie. TCPMP was always the best, then it did not work. So far, your version works great. I owe you a beer!

[tmn0004676]

Hi

Does anyone know if TCPMP supports MPEG2 using the ffmpeg plugin. I couldn't get it to work!

thanks

[kalarpu]

I have been installed in my LG GM730.
But when I try to open any type of file, I just see white screen and my phone no working.
Any solution?

[surayoot]

thank you so much:D