qtek 9100 died ? [Archive]

yappibiz

29-03-2008, 01:50 PM

starkwong

31-03-2008, 06:38 AM

Hi.
Sorry for my English. :-(

Upgrade ipl/spl to 2.61.11

http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=fileinfo&id=383

After reboot no response anything.

How it switch in bootloader mode?
Thanks.
What you have upgraded is Radio ROM, not IPL/SPL.
However if you have upgraded something else, maybe that is causing the problem.

You didn't explain what "no response" means. If the boot logo is shown, flash your original Qtek ROM to have everything restored to normal. If it does not power on, try to fully charge your phone (using wall charger). It that doesn't help than your may have a unrecoverable brick.

yappibiz

31-03-2008, 08:55 AM

starkwong
Thanks for reply
No response = power button no active.
I up radio to 2.61.11 after reboot - brick.
CID is lock, G4.

webpatrick

31-03-2008, 03:12 PM

- use your original wall charger to charge the phone fully, another miniusb wall charger will not work, does not have enough power.

- switch into bootloader mode (press and hold camera button and soft-reset, release soft-reset but hold camera a bit longer)

- in bootloader mode, install an original rom.

Good luck.

zabardast_1

31-03-2008, 10:35 PM

starkwong
Thanks for reply
No response = power button no active.
I up radio to 2.61.11 after reboot - brick.
CID is lock, G4.
Just flashing and upgrading Radio Rom doesn't Brick the phone,it doesn't include any IPL/SPL in it,unless you have flashed some rom with ipl/spl in it.Try to get the battery fully charged,hope it'll work out,otherwise,force the phone into bootloaders (tricolor screen) and flash the official stock rom from the carrier.