Problem with HardSPL

[Tjojo]

Dear all,

Does anyone can help me with hardSPL software ?

I would like to change my ROM with the Shaps 's one...
So after having read severals topics it seems that a hardSPL is needed to unlock the current ROM.

So I have followed a tuto found on a french forum to unlock the ROM using HardSPL software.

All is running apparently well... until I have the screen with tri-color with USB wrote. Then I unplugged -replugged my TYTN II... consequence I loose the activesync connectivity... I tape ENTER.. then program is starting and is asking to have activesync connectivity for the rest of the procedure.

PS : At this stage by TYTN II appearance is still tri-color screen with USB wrote (no way to do anything on TYTN II at this moment)

My problem is that I am unable to have activesync connectivity again... I have wait for 5 or 10 minutes without success.
After severals attemps I decided to continue the program by typing NEXT... result is hardSPL is successfull.... but in the program result he doesn't give me any info on current ROM (as it is maybe supposed to provide apparently) !

Question : Is this result normal... does hardSPL worked well even if the activesync icon did not come green back ? Can I launch Shaps' s ROM installation ?

PS 2 : In case I launch Shaps 's ROM instalation on my TYTN II without having done correctly the hardSPL... does this action can break my TYTN II ?

Many thanks in advance for your help/answer.

@+ Tjojo.

[XtreMe_G]

you are supposed to run it wiht the activesync icon greyed out.

put your device into bootloader and if it says olipof there, then hardspl is done

[Tjojo]

you are supposed to run it wiht the activesync icon greyed out.

put your device into bootloader and if it says olipof there, then hardspl is done

Hello XtreMe_G,

many thanks for this quick answer...

Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?

Once again Mthks.

@+ Tjojo.

[XtreMe_G]

Hello XtreMe_G,

many thanks for this quick answer...

Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?

Once again Mthks.

@+ Tjojo.

i'm sorry but i really do not get what you are trying to say.

just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly

[Tjojo]

i'm sorry but i really do not get what you are trying to say.

just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly

Oki... just did it..

So I have Tricolor screen.... with

KAIS130
SPL-1.56.0000
CPLD-8


Serial


Does it means it did not work :mad:

@+ Tjojo.

[Zaf]

1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.

hope this helps...

[Tjojo]

1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.

hope this helps...

Hello Zaf,

Mthks for this tuto... I will try it tonight when I will be at home.. currently at work without being able to close firewall & antivirus.

Thks.

@+ Tjojo.

[Valdeone]

HI,

somebody help me please?

I had one TyTnII
Radio 1.27.15.32
Protocol Version: 22.51.88.13H

I try to cid unlock, but when a run HardSPL, the application show me one error: Errorcode = -2146893818, something about: invalid assign
The same thing happend when I try to install googlemaps for example.

My sim is unlock.
Have you any idea for help me?

Thanks.