qtek 9000 doesn't turn on

[alexcagliari]

first i'm sorry for my english :( i try to explain my problem in best language :D
i have a qtek 9000 and one hour ago i flashed my phone with Ranju_v76_WM61_19209_19209_1_0_2.exe (sticky topic) and this operation finish correctly.I used wm6 for abouy 5 minutes. suddendly my ppc turn off and doesn't power up but if i press keys for hard reset it power up with press 0 to restore factory or X...
If i press 0 my ppc turn down and doesn't power up.
If i try to connect in my pc windows xp write "Periferica non riconosciuta".
how can i do?

[kecido]

Hi Alex, well, have you tried to enter in bootloader mode and re-flash with your prior rom?
Also, you might want to try a full hard reset to your device first.

Let me know if you need italian directions for this.

[techx]

Also check if your battery is old or try getting a new one and charge it and boot it up.

Mine was some what of the same problem, until i got a new battery and now it's working.

[DHarman]

My XDA with the ranju rom did this over the weekend. Was working fine for weeks then turn it on after 2 days non use and its dead. Could the rom have an issue?

[DHarman]

All sorted now via bootloader.