qtek 9000 doesn't turn on

[alexcagliari]

first i'm sorry for my english i try to explain my problem in best language
i have a qtek 9000 and one hour ago i flashed my phone with Ranju_v76_WM61_19209_19209_1_0_2.exe (sticky topic) and this operation finish correctly.I used wm6 for abouy 5 minutes. suddendly my ppc turn off and doesn't power up but if i press keys for hard reset it power up with press 0 to restore factory or X...
If i press 0 my ppc turn down and doesn't power up.
If i try to connect in my pc windows xp write "Periferica non riconosciuta".
how can i do?

P.S. if i put mi ppc in bootloader menu i see usb in the top but if i try to start the flash operations with Ranju_v76_WM61_19209_19209_1_0_2.exe at the 7% flash fails...help meeee

[mauroc.26]

with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......


bye M.C.

[alexcagliari]

where i can find jasjar-bl1.01-ruu-v1.2?

[mauroc.26]

ftp://ftp.clubimate.com/ or search in google

[alexcagliari]

and after i install bl 1.2 what i have to do?

[mauroc.26]

restart your uni trust in that......

Connect with your pc-usb and start the application softreset and your device restart try.....

[alexcagliari]

i downloaded this file,upgraded (with "congratulations" at the end) my ppc but the bootloader is still 1.01 :(
how it is possible????
this is the windows that appear when i start that program
http://img357.imageshack.us/img357/3261/fffewlp4.png

[mauroc.26]

push update and read yours PM

[alexcagliari]

i pushed update and i restarted my ppc with - - but if i press 0 my ppc turn off :(
what can i do?

p.s. mauro hai msn?

[mauroc.26]

retry with upgrade and - - and push hole of reset at press x or 0 press zero try

[alexcagliari]

mauro ma quel file non mi dovrebbe upgradare il bootloader da 1.01 a 1.2?

[mauroc.26]

this is not the problem follow the istruction on display

[alexcagliari]

i followed instruction but wm6 does not appear :(
I can only use bootloader or hard reset but if i press 0 ppc start reset operations but after 2 second turn off...

[mauroc.26]

try to reflash the rom ranjus 7.6

[alexcagliari]

i tried abot 20 times...but flash stop at 7% with ERROR 112 UPDATE CE ROM ERROR....i try with different rom's but this error is still present...
what can i do now?

P.S. i just use the no ID file to start the flash....

[mauroc.26]

“error 112: CE rom update error”, what should I do?
have you tried to leave the battery for 20 mins and retry to exit from bootloader? retry bootloader upgrade reset,your battery are at full charge?
try pdaviet rom don't panic

battery all charge device leave sim and memory card from bl start ruu from rom upgrade try....

bye


M.C.

[lumpy33]

solution is here http://buzzdev.net/read.php?40,34924,34953
use mtty utility from http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader

[Confucious]

OK, similar to OP but I can't enter Bootloader. Tried flashing (using Vista 32) it failed and the instructions said to press to softkeys and soft reset to get to bootloader! This, of course, takes you to the screen to press 0 to restore factory defaults or x to exit - both of which just turn off my device and it doesn't boot.
Pressing 'power, light and Soft Reset' does not take me to bootloader - the only screen I can get to os the press 0 to restore factory defaults screen, nothing else seems to do anything.

Any ideas?

Thanks

I have no SIM in the phone and have removed the SD card

[Confucious]

OK. As I got no replies I decided to just try flashing another ROM. E ven though I couldn't get to Bootloader it flashed fine. Now running thingonaspring ROM :)