WLAN ok, but no websites are shown.

[D@niel]

That's why I've never had an Windows Mobile device before.

Symbian, iPhone, everthing works fine with my WLAN. WPA Key and go go go :)

My Kaiser has a WLAN connection but the IE wont' show any page. Why?

[shazaani]

First thing is to isolate the problem. Are you able to access the internet via Actice Sync? When connected to the WLAN are you able to access any other services on the internet such as windows live to check your email or if you have HTC HOME the weather info?

Also check to make sure you are getting a proper IP address, Gateway, and DNS server from the router to your PPC. Task Manager is a good utility which lets you run the Ipconfig/all command. You can also use the PING command in Task Manager to see if you can ping anything on the internet.

If you are getting the proper TCP/IP settings trying accessing a site using its IP address instead of its Domain Name to islolate if the problem is with the DNS server settings in PPC.

If still no luck post the results from the above troubleshooting and we'll go from there.

[D@niel]

Correct IP Address, check! I forgot to mention...

Thank's for your help, I'll check the steps in the evening at home.^^

[D@niel]

I just can connect to my router's IP address and see the configuration page. My device has it's own static IP.

IE says "site cannot be displayed, because the connection has been interrupted".

Do I have to quit HSPDA and Bluetooth? I guess not.

[shazaani]

Let me know if you can connect to this http://134.126.10.50/

[D@niel]

Let me know if you can connect to this http://134.126.10.50/

No, same error.

Surfing via ActiveSync is no problem.

[twoace]

If you said that it's possible to connect to router but not outside of router, then do you use MAC Access Control and/or MAC Fillter Internet Firewall on your router?
Possibility MAC Filter Internet Firewall. Without MAC Access Control specified, it's not possible to connect to router.

Hopefully it helps.

Best regards,
TwoAce

[D@niel]

I'm using a MAC Filter, but the MAC of my Kaiser has been written to the MAC list. I'm trying without the filter...

[roomer11]

Previously I could connect to my home WLAN, but I could not perform any surfing until I came across a suggestion to goto Settings->Wireless LAN->Power Mode slide to Best Performance.. and viola.. I am good to go..

don't know if you have the same issue, but jus my 2 cents.. ohh n I was using Polaris aka Touch Cruise.. :)

[smjoshi]

I have the same problem as D@niel has - the root cause may or may not be the same however. Here is what I found in my case -
(i) Connecting to WLAN - no probems, works every time
(ii) While connected to WLAN, sending/receiving emails through my exchange server or browsing my company's intranet site - no problem
(iii) Surfing internet while connected through USB cable/active sync - no problem
(iv) Can't connect to any internet site while connected to WLAN

I found that when connected through USB Cable/active sync - the proxy server address seen when I go to Settings->Connections->Connections->Edit proxy server is the correct company proxy server address. The moment I connect to WLAN - this field becomes blank. Even if I edit and insert the correct address, it doesn't stick. The moment I disconnet from WLAN and go and check the proxy server address - again it shows the correct address. So the root cause of the problem seems to be that something is wiping out the correct proxy address while I am connected to the WLAN.

I remember seeing a thread somewhere discussing this vanishing proxy settings problem. I wasn't able to find it today but I intend looking again when I get an hour or so.

[jas1976]

I agree with roomer11 about the power settings, i have two HTC tytn ii's and i had the same problem with both(one mine,one is my wife's)...i'm running wpa2-psk now but does it on wep too...

[D@niel]

It work's.

I have deactivated the MAC filtering. I doesn't make any sense, because the MAC I've entered is the right one, but ok. Must be a Windows Mobile voodoo thing.