Total call duration clock

[^^rac]

Hi guys!

I tried to set the Himas clock back, it went bad.......

Any ideas?

I have attached a screenshot for this!

Thanks!

[ather90]

hey rac..how r u man..the call duration can be reseted..but its a very complicated and daring proces..bcause you have to hardrest a couple of time..but i dnt remember it now..as i have it on my PC..and im at ma college

[^^rac]

hey rac..how r u man..the call duration can be reseted..but its a very complicated and daring proces..bcause you have to hardrest a couple of time..but i dnt remember it now..as i have it on my PC..and im at ma college

Im cool man!
Real cool! If you can check it out for me, id appreciate it!

Later man!

[shiranmotha]

Resetting the call timer can be easily done... I did this several times on wm2003. But couldn't try on wm6.1. But I hope the results would be the same.
1. First check the call timer seperately for incoming & outgoing calls by START -> SETTINGS -> SYSTEM -> DEVICE INFORMATION -> CALL DURATION. Please make sure you write it down.
2. Now get a calculater and devide each value by 24 to get the call duration in days.
3. Now back calculate that amount of days from current data and time and find the corresponding date - month and year and note it down.
4. Now make a outgoing call. You cal call a free number as to check your account ballence.
5. While u r in d call get in to the clock application and reset the clock to the date U calculated by the above calculation for outgoing call duration.

PLEASE NOTE: Never set a date back intime that is more than the call duration...

6. Close clock application and then Cut the call.
7. Now reset the clock to current date & time.
8. Now check the call duration.

9. Ask someone to call you and do the same procedure for incomming calls.

I repeat, Never exceed the call duration in back calculation of date. It's ok to set a lesser duration, but not more.

Sorry about my english, if U still have problems, ask me.

[^^rac]

Resetting the call timer can be easily done... I did this several times on wm2003. But couldn't try on wm6.1. But I hope the results would be the same.
1. First check the call timer seperately for incoming & outgoing calls by START -> SETTINGS -> SYSTEM -> DEVICE INFORMATION -> CALL DURATION. Please make sure you write it down.
2. Now get a calculater and devide each value by 24 to get the call duration in days.
3. Now back calculate that amount of days from current data and time and find the corresponding date - month and year and note it down.
4. Now make a outgoing call. You cal call a free number as to check your account ballence.
5. While u r in d call get in to the clock application and reset the clock to the date U calculated by the above calculation for outgoing call duration.

PLEASE NOTE: Never set a date back intime that is more than the call duration...

6. Close clock application and then Cut the call.
7. Now reset the clock to current date & time.
8. Now check the call duration.

9. Ask someone to call you and do the same procedure for incomming calls.

I repeat, Never exceed the call duration in back calculation of date. It's ok to set a lesser duration, but not more.

Sorry about my english, if U still have problems, ask me.

Hehehe

Thanks for the info mate......
Thats exactly what i did, but i turned the clock back to far........

If you check in my screeny, the outgoing calls meets up to something like 302 years........heheheh! And i dont think i can set the clock back that much.

[c_shekhar]

Hi guys!

I tried to set the Himas clock back, it went bad.......

Any ideas?

I have attached a screenshot for this!

Thanks!

Try this -->http://forum.xda-developers.com/showpost.php?p=1111614&postcount=285

[shiranmotha]

Hehehe

Thanks for the info mate......
Thats exactly what i did, but i turned the clock back to far........

If you check in my screeny, the outgoing calls meets up to something like 302 years........heheheh! And i dont think i can set the clock back that much.

This happened to me too... but U can stiil use the same method. First set ur clock to 2080 or something and while on the call set it to 1980. (In my i-mate I cannot set a date earlier than 1980) Repeat it for 3 rounds. The best way is when U r close to around 50hrs in call timer, go year by year back... And also remember to turn off the reminders and alarms before starting this, otherwise the alarm notifications will b a headache. Try it mate.

[^^rac]

This happened to me too... but U can stiil use the same method. First set ur clock to 2080 or something and while on the call set it to 1980. (In my i-mate I cannot set a date earlier than 1980) Repeat it for 3 rounds. The best way is when U r close to around 50hrs in call timer, go year by year back... And also remember to turn off the reminders and alarms before starting this, otherwise the alarm notifications will b a headache. Try it mate.

Genuis!!!!!!

Thanks alot! This worked perfectly! I set my duration back to only 1 hr!!

Thanks alot guys! (I never tought of this)....hehehehe!

Thanks Shiran