View Full Version : mt htc herald stuck in bootloader mode after hard spl
halder
23rd April 2008, 12:31 PM
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
tramuyo
23rd April 2008, 05:51 PM
this is another story of bricked Herald device
there's no solution for that :) you have to wait
speedblaster@yahoo.com
23rd April 2008, 05:58 PM
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
what part is it stuck on, the white screen?
Provide more information
tramuyo
24th April 2008, 05:52 AM
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
halder
28th April 2008, 01:38 AM
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
tramuyo
28th April 2008, 09:50 PM
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
fzzyrn
28th April 2008, 11:39 PM
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
halder
29th April 2008, 12:47 AM
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
tramuyo
29th April 2008, 02:01 AM
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
fzzyrn
29th April 2008, 02:18 AM
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
tramuyo
29th April 2008, 02:36 AM
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
kirvis
15th May 2008, 09:16 PM
can we start to donate for man who can solve this problem?
i can donate 100$
halder
16th May 2008, 01:48 AM
me too
just help as we will do evey thing
halder
29th August 2008, 04:12 PM
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
clifford25501
29th August 2008, 05:34 PM
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake :(. another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
ivanmmj
30th August 2008, 12:51 AM
I don't know if there's anything you can do, but try this (http://forum.xda-developers.com/showthread.php?t=421000). It hasn't been tried on the Herald, that I know off, but it's worth a try.
ttran001
30th August 2008, 05:39 AM
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
deuceripsta
31st October 2008, 11:13 PM
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
Jmorgado
4th November 2008, 08:39 PM
I have problem the same. exists somebody that helps me? urgent
rajeshbahri
17th November 2009, 04:35 AM
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
livndeadgrl13
18th November 2009, 05:55 PM
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
have you hard SPLed your phone? if not while in bootloader mode try to run the hard SPL rom , imo you should try using flash center to flash instead of your SD card at least till you have a good rom to work with, then change it out using the SD card.
if you are then you should be able to flash while in bootloader mode, iv had the same issue with one of the first roms i flashed i thought i bricked it, i just had to keep flashing till i got a rom that took
hope this was at least a little help
also use the xda search engine for unbricking wing/herald whichever one you have there have been many threads and posts on how to fix this issue, if you pay attention and go over every step its kinda hard to brick the wing/herald, not to say it hasnt been done but it shouldnt :)
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.