Radio Version for Japanese Kaiser

[shippyt]

Hi Guys

I'm over in the states doing some testing and my Japanese colleague is currently having poor audio using his TytnII/Kaiser. His current radio version is 1.27.12.11. Is there a specific radio version he has to use for it to be compatible in Japan?

I've only ever updated ROM's for TytnII's and Polaris's in the UK and Europe and no nothing about the GSM networks etc in Japan so any help would be greatly appreciated.


Many Thanks

Tim

[NuShrike]

I'm over in the states doing some testing and my Japanese colleague is currently having poor audio using his TytnII/Kaiser. His current radio version is 1.27.12.11. Is there a specific radio version he has to use for it to be compatible in Japan?

I've only ever updated ROM's for TytnII's and Polaris's in the UK and Europe and no nothing about the GSM networks etc in Japan so any help would be greatly appreciated.Japan has no 'GSM' networks. That said, I had great success with 1.27.12.32 on Softbank and DoCoMo over past Christmas. However his radio version and all radios should be compatible with Japan's 3G network which uses the same frequency WCDMA 2100MHz as UK/Europe.

I'm assuming your friend is not having problems with BT audio.

[shippyt]

Thanks for the quick reply NuShrike, I've just realised what an idiot I am as my Polaris is working fine out here :o

Will flash with the same radio firmware as yourself. The only issue he is currently experiencing is poor audio through the rear speaker which I'm led to beleive can be resolved by upgrading the radio.

Many Thanks

Tim

[NuShrike]

The only issue he is currently experiencing is poor audio through the rear speaker which I'm led to beleive can be resolved by upgrading the radio.np! For the rear speaker, he can maybe try some registry tweaks to increase the volume. Otherwise, it's a speaker on a phone, and I've haven't had superior experiences with such.

[tyoshi]

Hi Guys

I'm over in the states doing some testing and my Japanese colleague is currently having poor audio using his TytnII/Kaiser. His current radio version is 1.27.12.11. Is there a specific radio version he has to use for it to be compatible in Japan?

I've only ever updated ROM's for TytnII's and Polaris's in the UK and Europe and no nothing about the GSM networks etc in Japan so any help would be greatly appreciated.


Many Thanks

Tim

Does your colleague have a Japanese TytnII, called S11HT (emonster)? If so, it is better NOT TO FLASH any radio. Because, S11HT is tuned for 1.7GHz and 2.1GHz is blocked. 1.7GHz HSPDA is used only Japanese mobile phone company, e-mobile, in the world in my knowledge. This means other radios may not support 1.7Ghz and his S11HT is not able to use in Japan. He may be use GSM in other countries, however, There is no GSM network in Japan.

[shippyt]

I've sinced found out that its a UK version that we sent him for testing, initial reports are that the audio quality has improved (no longer an intermittent crackle when using the rear speaker).

Cheers guys

[NetrunnerAT]

Can some one make a NV-Item Dump?

I want know, if its only a NV-Item setting or not! Possible i can provide a Menual to enable this Frequency!