IMAGiNet Arabizer - Not All ROMs

[King of Rapture™]

I have been on the KaiSer forum for the last few months. As from my signature below, I have been lurking for a long while at the Universal forum. Thus, my acquaintance with master-chef Leo.

The first thing, I did when I got my att tilt early this month was to install the Hard SPL and then install L26_WM6.1_PRO v1 (Based on the AT&T 209 build) from the following thread:

http://forum.xda-developers.com/showthread.php?t=381837

When I tried to install the IMAGiNet Arabizer, it didn't install at all. Being a ROM flashing junkie from the Universal forum, I wasn't surprised at all. I had encountered this problem once in the past, even though clearing the prior install after the new flash

I encountered the same problem with Leo's v2, which was recently released on 24 April, 2008.

Being a flash junkie, I tried some of the Dutty's ROM released from during March and April. Didn't encounter any problem with these ROMs.

During April the TNT 19202 Series ROM was released too by Its Right. The IMAGiNet Arabizer didn't install with this ROM too.

http://forum.xda-developers.com/showthread.php?t=385900

But, I could install the InforMobility Arabizer on all these three ROMs, two by Leo and one by Its Right.

Both these IMAGiNet Arabizer and InforMobility Arabizer are paid programs and come with several modules. IMO the IMAGiNet is a better product than InforMobility.

Secondly, one of the beauty of KaiSer ROMs is that they are UC capable. Thus, it is frustrating that during the SDConfig process a software refuses to install as this knowledge is not previously known.

I have uploaded the two main modules for the IMAGiNet Arabizer. They have a trial period of one month.

Can some of the masters on this forum and everyone else help to resolve this problem that why the IMAGiNet Arabizer doesn't work on some ROMs?

Many thanks in advance! :)

KOR! :)

[King of Rapture™]

Also, this is what I found on Leo's ROM. I am not sure if the problem is related to the above.

Anybody tried using Wifirouter v1.01 with this build?? Because I cannot install this application (Installation unsucessfull)??
I was able to install this application on dutty's builds etc???
Cheers Ody

http://forum.xda-developers.com/showthread.php?t=381837&page=37

[asfoor]

It all has to do with the 19209 build. I am able to install all the programs you listed without any problems using Dutty's April 1st Hybrid ROM. I also was able to install and use iGO 2006 and MSVC.

One thing though, MSVC will stop working after a couple of uses if it is mapped to the PTT button, or any button that has the press and hold capability. So I mapped the MSVC to button # 4 ( OK Button).

I am using a 8GB Micro SD Card as well, however, when I create a folder on the SD card, any dll file that I save there will NOT show or display!

I have tried all ROMs there is and finally realized the best ROM for my purposes is Dutty's April 1st Hybrid.

Just my 2 cents...

[King of Rapture™]

Hi Asfoor,

Thanks for your reply.

Excellent observation! :)

I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.

So, is Leo's v1 is a hybrid ROM 19209.

And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?

Thanks,

Mohamed

[shafez]

It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.

Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1

Regards.

[statik]

Love the ROM and it works great! No problems yet. Better then Duttys I think :D

Can anyone link me to a Tomtom download that will work for this ROM please?

Also, are there any threads or sites that list optional appz that can be installed on this ROM?

[asfoor]

Mohamad, Just flash with this ROM:

http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zi p

I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...

[asfoor]

It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.

Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1

Regards.

Not true... I have it on my WM6.1 Hybrid and working fine (or as intended for it to work), using the Rom I just pointed to via Rapidshare.

I also find that In4mobility is better than Imaginet Arabizer, as the issues with Imaginet are mutually suffered by all WM Versions; Stability issues, Freezing, and slowness.

[Laurentius26]

Hi KOR,

V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.

I want to release V3 on monday based on the build 3.51.502 :D

Thanks,

Leo :)


Hi Asfoor,

Thanks for your reply.

Excellent observation! :)

I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.

So, is Leo's v1 is a hybrid ROM 19209.

And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?

Thanks,

Mohamed

[msharaf]

Hi KOR,

V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.

I want to release V3 on monday based on the build 3.51.502 :D

Thanks,

Leo :)

The problem is that windows refuses the installation giving the error "installation unsuccessful". It may be related to certification or something like that. I believe a chef like you can get it for us as many of us are not using some good ROMs for that reason.

Thanks

[asfoor]

Hi KOR,

V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.

I want to release V3 on monday based on the build 3.51.502 :D

Thanks,

Leo :)

Leo... Good to see you here... also excited about your release on Monday for a new build ROM. Keep us posted. I am wondering if you are gonna do without HTC Home this time around.

[hbahaie]

Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor) :)

Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.

Greetings

[walker]

Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor) :)

Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.

Greetings

Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks

[hbahaie]

Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks

yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.

[Maldoro]

Imagent (=Mobidiv New Version) Arabizer is compatible on most (85%)of the roms
I had similar problem before (error installation)
The conditions needed for successful installation
1-Make Sure that you manually remove all Arabizer folders wither Imagnet or in4mobility from you storage card (if you installed any prior applications on SD)
2-After flashing any new rom, Arabizer Cabs Must Be the FIRST TO BE INSTALLED preferably on the main memeory.
I agree there are few roms you will not be able to succeed

[hmdshmds]

Hi KOR,

V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.

I want to release V3 on monday based on the build 3.51.502 :D

Thanks,

Leo :)

Hi Laurentius26
Thanks for your interest in helping us with this issue, I really like your roms
its my favorites actually :)
The problem with the Arabizer software (Imaginet/Mobidiv) is that it can not install , it will give an immediate message of (installation unsuccessful) as soon as I choose the destination drive.
this is true in almost all wm6.1 except all dutty's roms !
I thought the problem was with registry since duttys do a lot registry tweaks.. so I made a comparison between duttys registry and yours trying to figure out the differences... but no luck :(
I also managed to trace the CAB execution through IDA assembler to see why the file is refusing to install but no luck.. since I don't know how do this with a cab file... I usually do it with exe and dll
for now I am sticking with duttys rom since they are my only choice. and I really missed you ROMs

[King of Rapture™]

Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor) :)

Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.

Greetings

Salam brother hbahaie,

Thank you for your welcome. Nice to see some old faces, it makes me fell home.

Sorry, to reply a bit late. Was doing some more research. The problem with both IMAGiNet and MOBiDIV is that they both refuse to install on Leo's ROM. Giving the message "installation unsuccessful". This is with Leo's all ROMs, whether hybrid or not. However, the InforMobility (Fejebi ein) does work on Leo's ROM and as you mentioned it is not so beautiful.

yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.

Thank you for your help on master TSD in ce4arab. :)

Mohamed

[King of Rapture™]

Hi KOR,

Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.

I want to release V3 on monday based on the build 3.51.502 :D

Thanks,

Leo :)

Hi mate,

Waiting for your release v3. Hopefully, you had the time by then to look into the IMAGiNet Arabizer. Thanks!

Regards,

KOR! :)

[King of Rapture™]

Mohamad, Just flash with this ROM:

http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zi p

I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...

Hi Asfoor,

Thanks for your recommendation. At various times I had Dutty's ROMs from March to April, all of them.

I will try again tonight before Leo issues his v3, the ROM you have recommendation. I have a big problem with all Dutty's ROMs, that once the bluetooth is connect, the ring tone goes to bluetooth and I miss all the calls (miscalls).

Maybe, some registry tweak?

KOR! :)

[hmdshmds]

the Arabizer software Mobidiv not working on Laurentius26 lates rom release V3 :mad:
it works however with duttys latest one :)
what is the secret behind this

[Laurentius26]

Hi,

I will compare Dutty's and mine .hv files to see if I find the differences.
This is the second software that only runs on Dutty's builds.

Skype also runs only on Dutty's.

I also have reglogger on the ROM Start\Programs\Utilities, maybe this could be of any help?



Hi Laurentius26
Thanks for your interest in helping us with this issue, I really like your roms
its my favorites actually :)
The problem with the Arabizer software (Imaginet/Mobidiv) is that it can not install , it will give an immediate message of (installation unsuccessful) as soon as I choose the destination drive.
this is true in almost all wm6.1 except all dutty's roms !
I thought the problem was with registry since duttys do a lot registry tweaks.. so I made a comparison between duttys registry and yours trying to figure out the differences... but no luck :(
I also managed to trace the CAB execution through IDA assembler to see why the file is refusing to install but no luck.. since I don't know how do this with a cab file... I usually do it with exe and dll
for now I am sticking with duttys rom since they are my only choice. and I really missed you ROMs

[hmdshmds]

Hi,

I will compare Dutty's and mine .hv files to see if I find the differences.
This is the second software that only runs on Dutty's builds.

Skype also runs only on Dutty's.

I also have reglogger on the ROM Start\Programs\Utilities, maybe this could be of any help?

cool dude :)
here is a small arabic calendar application (http://www.zshare.net/download/1137542828ead935/) that come with the arabizer software.
if you succeed in installing it... then there are no more mysteries.. you solved the problem :)
wishing you good luck.. and waiting for the good news ;)

[hmdshmds]

Problem was discoverd and solved by LEO
Thanks a lot Laurentius26 ;)

[VirgilWoods]

Just wanted to add something strange I found with the Arabizer. I installed it on Laurentius26's latest ROM (v4, 19209 hybrid) and it went fine. After restarting the device, there were no Arabic symbols, all I saw in place of them were blocks, like the language was never installed. Also, after installation, I couldn't get service. My signal began floating between an exclamation point and 2 bars, but was never stable. After uninstalling, I still had the same problem with the signal, though everything else seems fine so far.

[shafez]

Use Imaginet Arabizer Version 2 Built 342.

Regards

Just wanted to add something strange I found with the Arabizer. I installed it on Laurentius26's latest ROM (v4, 19209 hybrid) and it went fine. After restarting the device, there were no Arabic symbols, all I saw in place of them were blocks, like the language was never installed. Also, after installation, I couldn't get service. My signal began floating between an exclamation point and 2 bars, but was never stable. After uninstalling, I still had the same problem with the signal, though everything else seems fine so far.

[VirgilWoods]

Use Imaginet Arabizer Version 2 Built 342.

Regards

Shoukran, now I can sell my phone in Lebanon.. if there isn't a war this summer :)

[salemh]

Problem was discoverd and solved by LEO
Thanks a lot Laurentius26 ;)

And how this was solved!!! come on guys!! Thnx

[moshmoshkelah]

salam all here is a good arabization for all roms (i didnt try all roms ofcourse)
and for wm6/wm6.1/wm6.5
this is is mbedev arabizathion wich was khnown as imagenet

thanks to taiseer999 from www.ce4arab.com

http://rapidshare.com/files/198353767/Taiseer.zip

and for accesories like pryer time and so on from here

http://www.zshare.net/download/56972441b1f9bddf/

orginalpost from here

http://www.ce4arab.com/vb7/showthread.php?t=147055