View Full Version : Can the Tytn II drivers be ported onto the Niki?
fritsypeij
10th May 2008, 12:06 PM
Hey, I was wondering if the Tytn II drivers, which will be released in a few days, can be ported to our Nikis?
Also HTCClassAction (in http://www.htcclassaction.org/#update_20080509_1) states that the drivers will be released in a completely new wm6.1 (official) package.
If the drivers of other devices with the msm7*00 chip will be released is uncertain.
NetrunnerAT
10th May 2008, 12:15 PM
Driver Porting ... it possible! I its released, some rom cooker will very fast released a working version!
DaVince
12th May 2008, 05:02 AM
Yes, I'm very positive it can be done.
The only thing I'm worried about if the TyTN II "drivers" will indeed be drivers.. or IF it will really be provided.
pj0011
15th May 2008, 04:18 AM
this is sounding quite exciting. i wish that i had the knowledge and the brain to be able to help out with the driver porting. were there actually updated drivers released with the kasier rom or was it just tweaks to the software?:confused:
DaVince
15th May 2008, 05:49 AM
The drivers are "expected" to arrive in the following weeks. The "drivers" does not exist yet.
fritsypeij
15th May 2008, 10:25 AM
Keeping my fingers crossed. Love you guys :)
tom_codon
15th May 2008, 01:30 PM
not only driver from kaiser.From other device possible for port also :)
xangma
15th May 2008, 05:29 PM
Now I don't know much about this. But doesn't the Tytn II have the Qualcomm7200 400mhz processor too? Surely you can port it if the processors are the same? Please say yes?
mccannmarc
15th May 2008, 05:37 PM
Now I don't know much about this. But doesn't the Tytn II have the Qualcomm7200 400mhz processor too? Surely you can port it if the processors are the same? Please say yes?
We actually have the MSM7200B chipset but its not really known what the differences (if any) are between the two!
xangma
16th May 2008, 12:16 AM
We actually have the MSM7200B chipset but its not really known what the differences (if any) are between the two!
Bad news already =( Keep us updated.
DaVince
22nd May 2008, 08:53 AM
Well here's the good news. (http://www.htcclassaction.org/#update_20080521_1)
And the leaked new TyTN II ROM (http://www.modaco.com/content/pocket-pc-professional-news/268599/the-htc-kaiser-6-1-performance-update-is-here/).
wmn79
22nd May 2008, 09:32 AM
And here a link to the thread with the Dutch Rom they are talking about which seems to have some sort of hardware acceleration:
http://forum.xda-developers.com/showthread.php?t=393716&highlight=HTC_NLD_3.29.404.
Antubis
22nd May 2008, 09:40 AM
New touch.dll fixing touchscreen problem...
New Kaiser ROM with improved (but not yet perfect if I've well understood htcclassaction...) graphic drivers...
The Niki is becoming a really interesting device... Just waiting for good hackers to port the drivers on it (I'm not good enough to do it myself :p).
Antubis
22nd May 2008, 11:22 AM
Is there anythere a list of the files that need to be ported to replace old drivers ?
In fact if we only need to replaces files and registry values, then G'reloc them I may try... (I don't think my Niki would be bricked since drivers are only part of the OS, and I might be able to reflash it entering the bootloader...)
fritsypeij
22nd May 2008, 11:31 AM
AH MAN :D:D This is what we were waiting for! *Building party*
xangma
22nd May 2008, 12:52 PM
Is there anythere a list of the files that need to be ported to replace old drivers ?
In fact if we only need to replaces files and registry values, then G'reloc them I may try... (I don't think my Niki would be bricked since drivers are only part of the OS, and I might be able to reflash it entering the bootloader...)
That's exactly what I was going to do. I'll take a look.
tom_codon
22nd May 2008, 01:26 PM
Driver of kaiser 19212 can't port for niki.I tried 2 week ago.Not luck.
ddi.dll kaiser not working in niki.It get Stuck device of Bootloader.
Other driver, can port but working bad.
We still need wait htc support niki device.Sorry for bad news for all :(
Antubis
22nd May 2008, 01:40 PM
http://www.oneposter.com/UserData/Poster/Poster_17602.jpg So we'll keep on trying...
xangma
22nd May 2008, 02:01 PM
Driver of kaiser 19212 can't port for niki.I tried 2 week ago.Not luck.
ddi.dll kaiser not working in niki.It get Stuck device of Bootloader.
Other driver, can port but working bad.
We still need wait htc support niki device.Sorry for bad news for all :(
Yeah I just tried the ddi.dll with disptools.dll too. Didn't boot. So, we have to wait for HTC to never release their driver for us?
DaVince
22nd May 2008, 02:48 PM
That is probably the saddest most dreadful news I've heard this week. :(
So how about the Diamond's on this (http://forum.xda-developers.com/showthread.php?t=393996) ROM?
And to be specific, the holy grail (?!) of our hopes, THIS (http://forum.xda-developers.com/showpost.php?p=2217896&postcount=1004) one.
maati
23rd May 2008, 03:08 AM
I also tried to port DDI.dll from Kaiser, in my case to Polaris. I'm also stuck at bootloader.
I'm sure this file is what we need (for Niki AND Polaris). And we need to hack it.
DaVince
23rd May 2008, 08:48 AM
Looks like it's not as simple as just replacing the files. I hope someone could hex edit it or something to make it work. :(
maati
23rd May 2008, 11:57 AM
I tried to ResHack it but it won't even let me change the version information.
fritsypeij
23rd May 2008, 01:29 PM
I hope the HTC spies aren't making fun of us, thinking "they will never succeed, cause our 1337 code skillz" :p
tom_codon
23rd May 2008, 02:36 PM
That is probably the saddest most dreadful news I've heard this week. :(
So how about the Diamond's on this (http://forum.xda-developers.com/showthread.php?t=393996) ROM?
And to be specific, the holy grail (?!) of our hopes, THIS (http://forum.xda-developers.com/showpost.php?p=2217896&postcount=1004) one.
Also not my friend :(
Tried many times.Not luck :mad:
xangma
23rd May 2008, 02:53 PM
The s600 rom has nothing more than the touch.dll I think. I don't know. I did run benchmarks on the original rom though - yes it's in chinese or something - and nothing showed.
xangma
24th May 2008, 11:49 PM
I've been trying a fusion of the Dutch Kaiser 2d drivers, cause there was some new acceleration in them. I can't get it to boot. I want DDI.DLL to run. So I found out it imports a whole other bunch of DLLs. So I grabbed them too. There's so many that every build I forget to include one or something.
But it's not working. Won't get past the 2nd splash screen ... but I didn't g'reloc. Hmmm *ponders*.
maati
25th May 2008, 12:36 AM
If you succeed in *anything*, PLEASE let us know!
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.