Please any help to leave tricolor

[polifon]

After this : http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37 phone is not power on , only tri color :
onbl: 1.07.0000
spl: 1.10.olip
Please its urgent.

[polifon]

when i try to flash it stops at 0% :
invalid update tool
How to flash it by SD card?

[rex4u]

Better if u do it through hard drive(PC) than SD card. Just use ROMUpdateUtility.exe (which will be in the same folder as your new Rom alongwith few dll and exe) few clicks and u r done. Write back if u still face some trouble.
Regarding tricolour screen problem see the video posted by bryangopan.Its good and explanatory.
Hope it all helps and good luck !

[polifon]

Better if u do it through hard drive(PC) than SD card. Just use ROMUpdateUtility.exe (which will be in the same folder as your new Rom alongwith few dll and exe) few clicks and u r done. Write back if u still face some trouble.
Please explain:confused:
when i try to use any rom update its give error: Error(300) Invalid update tool
use newer ......
phone screen show 0% freezed bar

[rex4u]

Ok bro'
Lets go step by step.
Tell me which ROM u r tying to flash.
And how.
Plz be detailed in step by step manner.

[polifon]

i try to flash gene_wm6.1_19581fix2_WWE by starting ROMUpdateUtility.exe
try gene_wm61_wwe same prob.

[Parmeet2k]

Ok bro'
Lets go step by step.
Tell me which ROM u r tying to flash.
And how.
Plz be detailed in step by step manner.



Hi,
I'm trying to update my phone from last 1 week but god no luck
1st Method I Try:
If I use JumpSPL.exe put 0x10000000 with 1.10-Olipro.nb , I use Power & Camera Buttons, it gets "Not Connected" in ActiveSync and then while I'm holding it, after a couple of sconds, it gets Connected in ActiveSync, I then release Camera and Power, Use ROMUpdateUtility.exe Agree to everything, It gets stared, on 2% of Update, gives me this.

http://i29.tinypic.com/2eaku4y.png


2nd Method I've Tried

Normally connected the phone through cable, did a Sync and ran ROMUpdateUtility.exe, It boots up with tricolor screen, gets to 2% and gives same message as in image.

I have 5 Images downloaded from this site, how can all be bad if users are able to upgrade their OS

Please Help.
A DETAILED, step by step method to update it would be Highly Appreciated.
Please Give Timings to Hold/Unhold buttons or Screenshots to explain more....

Thanx

[mobix]

Though not udpated to WM6.1, I've created "How To" for upgrading WM5 to WM6. Get it from here (http://forum.xda-developers.com/showpost.php?p=1924340&postcount=1), hope this will help.

[rex4u]

Brothers, your SPLs have not got patched that's why u r facing this problem.Try this
http://forum.xda-developers.com/attachment.php?attachmentid=67187&d=1201181109
Just copy this in your phone and run it.It will automatically flash your SPL and reboot.On reboot you should now see SPL as 1.10OLip.Now u can flash any ROM to your device.
If still some problem you are welcome to ask.
Hope this helps..:rolleyes:

[bryangopan]

After this : http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37 phone is not power on , only tri color :
onbl: 1.07.0000
spl: 1.10.olip
Please its urgent.

There you go buddy
http://forum.xda-developers.com/showthread.php?t=375064

[polifon]

There you go buddy
http://forum.xda-developers.com/showthread.php?t=375064

I hawe tryed this solution bro but its not help

[skarekar]

hey i am also having same problem as polifon....tried everything ...the gene is stuck in tricolor screen....not able to load any new rom ...neither the original one is loading....no response from the phone...when i press soft-reset and camera button together i see the tricolor screen and nothing else....

Need Help.....

[skarekar]

I think i have bricked the phone...