Can't connect to the internet after running ppst.exe on Bell. Please help!

[tripper22]

I have the Bell version of this phone and I ran the ppst.exe for sprint in my windows folder. This would be similar to allowing the customizations to run after installing the Alltel rom. I know it was stupid after reading through the whole ppst.exe thread. I flashed back from OMJ's Bell to the stock Bell rom and the internet will not work. The phone seems to freeze all the time. The PRL version is 31398 and the PRI version 2.03_003 presently. How do I get back to the old PRI and PRL? How do I fix this? Does anyone know how to change the Pri Version on the Vogue? It should be PRI version: 1.33_007. Thanks for any help.

[dabombz]

you would need to flash back to the original bell rom. 1.19 and radio 1.59 if i'm not mistaken. The links can be found over at ppcgeeks. Sorry kinda of in a rush so just figured i'd direct u in the right direction. Look under the vogue section and gps/rev a flash instructions. It should be stickied. At the bottom of the guide it tells u how to flash back to original bell. Good luck

[kbl]

I have the Bell version of this phone and I ran the ppst.exe for sprint in my windows folder. This would be similar to allowing the customizations to run after installing the Alltel rom. I know it was stupid after reading through the whole ppst.exe thread. I flashed back from OMJ's Bell to the stock Bell rom and the internet will not work. The phone seems to freeze all the time. The PRL version is 31398 and the PRI version 2.03_003 presently. How do I get back to the old PRI and PRL? How do I fix this? Does anyone know how to change the Pri Version on the Vogue? It should be PRI version: 1.33_007. Thanks for any help.


Did you actually let the customizations run? I also ran PPST on the leaked Sprint ROM and had no problems afterwards... just an updated PRI.

[ajones7279]

You can't run the PPST of another carrer. Thats why your data doesn't work. Flash back to the bell rom

[tripper22]

Fixed! Thanks everyone for the help! All credit goes to djharvey461! This got me out of a serious jam.

RESTORE THE 1.33.003 PRI
(Must complete the Downgrading and reverting back to original SPL tutorial first - CRITICAL)

If you are a Sprint user and you allowed the Alltel customization to run and complete then you most likely are now wondering where the Sprint PCS banner went from the HTC Home Plugin and are also wondering why you are not able to connect to the internet regardless of what you do. This is a tutorial on how to fix this problem.

What happened to cause this problem is that Alltel's customization also contains a 2.01.001 PRI which is different from Sprint's 1.33.003 PRI. Allowing customization to run will overwrite Sprint's with Alltel's leaving you with no internet or Sprint PCS banner on the Home plugin.

Here is how to fix it:

1. Download GetSPC here: http://www.5gmobile.us/mobilefiles/VX6800/GetSPC.zip

2. Extract the zip file and copy the GetSPC folder to the root of main memory of your device.

3. Go to Start/Settings/System/Device Information and either open notepad or get a piece of paper and write down your ESN. This is your HEX ESN.

4. Run GetSPC.exe from that folder you placed on in the ROOT folder of your device and in the TOP box, type in your HEX ESN. Hit "GO" and the number generated will be your MSL. Write this number down as well.

5. From the dialpad(MUST BE ORIGINAL VOGUE DIALPAD, NOT A SKINNED DIAL PAD) dial ##786# and it will bring up a large list of quite a few different numbers. Write down your MDN and MSID(you will need them, trust me).

6. Click Menu and select reset. It will ask you to put in an unlock code. Type in your MSL. Everything will reset back to the factory defaults, including your PRI, MDN, and MSID.

7. Follow boot sequence and align screen and what not and allow Sprint's customization to complete.

8. From the dialpad, dial ##(6 digit MSL here)# and click edit. Type in your MDN and MSID and click OK.

9. Your phone should now be reverted back to the bare bones stock OEM 6.0 Sprint ROM with the Sprint PRI of 1.33. You're done.

Edit/Delete Message