Rom trouble

[imzac]

So, I flashed Dutty's Windows Mobile 6.1 rom with no trouble. However, when I tried to install the radio, it only went to 95%. Additional tries resulted in it not even being able to start the process. It just stayed at 0%. (Is activesync suppose to be force-closed during the process?) I'm a total beginner, so any help is appreciated.

[kjb86]

So, I flashed Dutty's Windows Mobile 6.1 rom with no trouble. However, when I tried to install the radio, it only went to 95%. Additional tries resulted in it not even being able to start the process. It just stayed at 0%. (Is activesync suppose to be force-closed during the process?) I'm a total beginner, so any help is appreciated.

Could you be more specified please:

Which ROM & Radio? There are quite a few radios as well as ROMS from Dutty.

[livefastdiefun87]

People Read The Wiki Before Flashing It Tells You Everything!!!!

[imzac]

Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant

[NotATreoFan]

Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant

What radio version are you trying to flash? The 1.27.xx.xx listed above is a WM6 radio and it will not work with any 6.1 ROMs.

[kjb86]

Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant

Well, there is your first problem

No WM 6.1 ROM is compatible with a 1.27... radio.

In order for it to work, you MUST have a compatible 6.1 Radio.

[imzac]

That was the version I was trying to flash.

KAIS_Radio_Only_1.27.14.09_CustomRUU

So, I can fix it by finding the correct radio? I'm still having connection issues because of this forced ActiveSync close.

[kjb86]

That was the version I was trying to flash.

KAIS_Radio_Only_1.27.14.09_CustomRUU

Will not work!

The Wiki will answer all your questions.

You will need a 1.58/1.64/1.65 radio.

[imzac]

Will not work!

The Wiki will answer all your questions.

You will need a 1.58/1.64/1.65 radio.

Thank for that answer. However, I see nothing concerning why phone isn't connecting correctly, which I think is the main problem.

[kjb86]

Thank for that answer. However, I see nothing concerning why phone isn't connecting correctly, which I think is the main problem.

whats not connecting?

[imzac]

To my computer. Everytime it gets to the point where its "verifying information on your PDA phone" activesync closes out automatically. Then it says Error 264 and tells me to try again. Then activesync comes back. For any rom that I run. Now, because I'm the bootloader state, I can't connect to my computer initially like I did before. Does that matter?

[imzac]

Okay, a simple soft reset got it all the way to the percentage bar. However, it stays at zero and come up with that same connection message. Then, I have to go through the recovery process and nothing changes after that.

[austinsnyc]

Sounds like you messed up. anyway dd you have hardspl installed should be question number 1 and if all else fails use jockys FrankenKaiser and totally reset your phone.

[redbandana]

Sounds like you messed up. anyway dd you have hardspl installed should be question number 1 and if all else fails use jockys FrankenKaiser and totally reset your phone.

it doesn't sound like he has hardspl installed if he is attempting to upgrade his radio and it is stuck at 95%.

[imzac]

What are my options then?

[redbandana]

What are my options then?

Are you still stuck in bootloader mode?

[imzac]

Yes. Is my phone a paperweight now?

[redbandana]

If you are stuck in bootloader then download the file I attached. Next, follow these steps:

1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe

2. put your device into the cradle

3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)

4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")

5. type "task 8" to get your device formatted

6. type "task 0" to ask your device reboot

7. take the device out of the cradle, and manually reset it if it does not do that already.

After you follow these steps search for hardspl before you attempt to flash anything else you can brick your phone if you do not have hardspl installed. You're playing with fire right now messing with your device without reading. Hopefully this helps you.

[redbandana]

here is hardspl for you. please read the attached instructions.

Actually use the kaiser-hardsplv1

[imzac]

I don't see WCEUSB001 in PORT. I stopped the sync processes.

[redbandana]

I don't see WCEUSB001 in PORT. I stopped the sync processes.

make sure you stop sync processes when your phone isn't connect to the usb cable. read step 3 again. You should see WCEUSB001 if you did it correctly.

[redbandana]

I hope everything works out for you. I attached everything you need. Have a good day.

[imzac]

but, I don't see it. All I see is just USB. Is that okay?

[redbandana]

but, I don't see it. All I see is just USB. Is that okay?

should be.

[imzac]

Thank you. I'll try it now.

[imzac]

Worked like a charm. It's great. Thank you for everything.