help help !! i didnt open CID on X7500 and it will not flsh !!

[lidan25]

:confused:hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?

[responderman]

:confused:hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?

Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.

[lidan25]

Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.

sand me a link for AP 3.0
thanks
agin

[lidan25]

it didnt work it Flsh like 1% and Rest !!
on Ap 3

[irus]

it didnt work it Flsh like 1% and Rest !!
on Ap 3

thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom

[lidan25]

thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom

so is there any way to get out of this problem? help me if you can thanks

how do i get 1.2 olipro ??

[lidan25]

how do i hard spl my device ?
if i can only get to boot lood ?

[eaglesteve]

flash back to your original ROM first.

Then unlock to spl1.2.

Then flash to AP 3.

[lidan25]

flash back to your original ROM first.

Then unlock to spl1.2.

Then flash to AP 3.

is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?

[eaglesteve]

is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?

I usually download from htc club site. You need to be registered first.

If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.

[lidan25]

I usually download from htc club site. You need to be registered first.

If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.

can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?

[lakeman]

can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?

I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades

[lidan25]

I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades

thanks man
wall i hope this helps

[lidan25]

ok it did work thanks for all of you hare i think i will be ok for now !!

[responderman]

thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom

Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!

regards
Jay

[lidan25]

Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!

regards
Jay

hi thare the only problem i have is the wifi on AP 4.0

so now it is not a big thing now what do i need to do ??

responderman
i know you dont like me but now all is ok the wifi is not !!

[NeilM]

The messing with the wrong SPL and Bootloader has killed your WiFi.

If you have a note of your WiFi's original MAC address, then one of the developers may be able to help you. You can only hope one of them is watching this thread :)

[lakeman]

hi thare the only problem i have is the wifi on AP 4.0

so now it is not a big thing now what do i need to do ??

responderman
i know you dont like me but now all is ok the wifi is not !!

lidan25 you are annoying people who have given you good advice.
read the wiki http://forum.xda-developers.com/newreply.php?do=newreply&p=2238472
especially this part http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
which talks about your problem

go away and learn about the problems you have created by not taking the good advice already given

[responderman]

hi thare the only problem i have is the wifi on AP 4.0

so now it is not a big thing now what do i need to do ??

responderman
i know you dont like me but now all is ok the wifi is not !!

The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!

[lidan25]

The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!

ok i am sorry but now i am reding all the things i need to do bay using the Mac1EXE
and the matty.EXE

but the MAC address i dont have so from what can i get it ?? so i can tape it on the tool i have got form the link !! you give me !!
i know thare is some info on this link but not how to find mac add !! of my PDA For Wifi !!!the
http://wiki.xda-developers.com/index...Athena_AP4_FAQ

[musso]

but the MAC address i dont have so from what can i get it ?? so i can tape it on the tool i have got form the link !! you give me !!
i know thare is some info on this link but not how to find mac add !! of my PDA For Wifi !!!the
http://wiki.xda-developers.com/index...Athena_AP4_FAQ


Look on the label on the inside of the battery cover for your mac address.

[lidan25]

Look on the label on the inside of the battery cover for your mac address.

is it s/n
on the battery cover
or p/n ???

[musso]

is it s/n
on the battery cover
or p/n ???


I hope for everyones sake yours is on the inside of the battery cover like mine.
On mine, it has MAC:00092DF..etc, also P/N: 99HCN..etc, the IMEI number and also the serial number.
hopefully yours has the same, if so, that is your wifi mac address.

[lidan25]

I hope for everyones sake yours is on the inside of the battery cover like mine.
On mine, it has MAC:00092DF..etc, also P/N: 99HCN..etc, the IMEI number and also the serial number.
hopefully yours has the same, if so, that is your wifi mac address.

thats the big problem i dont have i only have p/n
and s/n
what shud i do now ??:eek:

[musso]

thats the big problem i dont have i only have p/n
and s/n
what shud i do now ??:eek:

I'm not sure of your next step, be patient, one of the real experts here will help you very soon I'm sure.

[lidan25]

thare is no way to get it like in dos in windows xp you do like IP config and the you get the info ??

[raskell]

thare is no way to get it like in dos in windows xp you do like IP config and the you get the info ??

If you have flashed to AP4 and you have lost your WiFi, then your MAC is no longer on your device. If you have a wireless access point or router which you have connected through before, then it may have a log or record of you MAC, especially if you used MAC filtering for access security. It would likely start with 00 18 or 00 09 as the first digits. IF you can not find it that way, then if you have an older phone or Nic which had WiFi but you no longer use it, you can try using that MAC. I have tested a wide range of MAC's on the Athena and it seems to accept any vaild address.

[responderman]

thare is no way to get it like in dos in windows xp you do like IP config and the you get the info ??

Go to start/settings/connections/wireless lan/and click the advanced tab, your mac address MAY BE THERE. if not use the mac off something else you own with wifi not used I guess.

Jay

[responderman]

If you have flashed to AP4 and you have lost your WiFi, then your MAC is no longer on your device. If you have a wireless access point or router which you have connected through before, then it may have a log or record of you MAC, especially if you used MAC filtering for access security. It would likely start with 00 18 or 00 09 as the first digits. IF you can not find it that way, then if you have an older phone or Nic which had WiFi but you no longer use it, you can try using that MAC. I have tested a wide range of MAC's on the Athena and it seems to accept any vaild address.

re router
So it does! nice one. good tip.

regards
Jay

[lidan25]

re router
So it does! nice one. good tip.

regards
Jay
ok i did it thanks for all it is ok my wifi works :)

[lidan25]

raskell
thanks for all the info you give me it workt and my wifi works agin !!
i give my wifi on my PDA a new mac IP that i find on my network and it did all the work :)