How can i format Diamond?

[only gs]

Hi guise
I have diamond to test it:)
it hungs on screen (smart mobilty):mad
how can i format it ?:o
i tried by pres and hold buttons with rest ::mad::

[Rudegar]

dont the manual spc how a hardreset is performed ?

[only gs]

dont the manual spc how a hardreset is performed ?

It dose not manual.

[rorydaredkign]

download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that

to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory

[Dark Fire]

Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.

[only gs]

download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that

to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaanks
all right

[rorydaredkign]

what combination did you do to get to bootloader? just so we all know
im glad to help
Rory

[Dark Fire]

im glad to help
Rory

lol
You should use that as a motto.

[Use2Smoke]

go to bootloader is:

hold down button and press (red) reset button

[yjlee168]

Bingo! This is the same as what the manual said. YJ
go to bootloader is:

hold down button and press (red) reset button

[fofo1881]

I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:

1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.

2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).

3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”

4. Press the volume up button.