[ROM]FInixNOver3.4/3.4Light - CE OS 5.2.19213 B19213.1.0.4 - [03/06/2008]ONLINE

[FeRoX80]

can someone upload the light versione of GRAY ROM in another hosting? because I have problems with rapidshare....
thanks.

[amanx]

will there any version for p3600i??
thx

[tnyynt]

can someone upload the light versione of GRAY ROM in another hosting? because I have problems with rapidshare....
thanks.

Here you go on Mediafire (http://www.mediafire.com/?zzxtubmy9nh)!

will there any version for p3600i??
thx

I wouldn't count on it!

[geney]

I tried Mary ROM and now revert back to this ROM. This time not the SL version.
In fact the non-SL version is also very lite. Got those basic apps that required. Good one :D

[serium]

Will this ROM work in P3600i? The one with built-in GPS.

[tnyynt]

Will this ROM work in P3600i? The one with built-in GPS.

GPS is not ROM dependent but Radio dependent, so if you have a GPS enabled Radio version, GPS will work with whatever ROM you are using.
As for the 3600I, there are some instructions here (http://forum.xda-developers.com/showthread.php?t=398867).

[amanx]

GPS is not ROM dependent but Radio dependent, so if you have a GPS enabled Radio version, GPS will work with whatever ROM you are using.
As for the 3600I, there are some instructions here (http://forum.xda-developers.com/showthread.php?t=398867).


not all the rom follow to that instructions can work ah
now only mary rom can work ><

[tnyynt]

not all the rom follow to that instructions can work ah
now only mary rom can work ><

My strong beliefs are that FInixNOver will not release a 3600I version. But someone from you, 3600I users, has to try to hack the 400 to 401 or whatever it is that you do and find out.

[joncgde2]

My strong beliefs are that FInixNOver will not release a 3600I version. But someone from you, 3600I users, has to try to hack the 400 to 401 or whatever it is that you do and find out.


yeh we found that part easy to do, especially with a hex editor - no issues there


the only problem is once the flash is complete, the phone hangs on the bootscreen - the only ROM to have successfully booted so far is the Mary one (lite, super lite, etc.)

I'm interested as to why Mary works, but the others don't.


If we can find out what this issue is, then we'll be sorted of with all our problems... i've pm'd olipro anyway in the meantime, hopefully there'll be some good advice there

[Odisej]

Hi,
is there any chance to change the settings of the dialer? In earlier versions there was a link to the list of all calls, now there is the video-call button. Also from the HTC home there used to be a link to list of all calls (missed calls), now the right button only takes you to missed calls (and won't remember if I change the filter settings to "all calls").
Is there a way to change this?

Thanks,
Peter

[tnyynt]

Hi,
is there any chance to change the settings of the dialer? In earlier versions there was a link to the list of all calls, now there is the video-call button. Also from the HTC home there used to be a link to list of all calls (missed calls), now the right button only takes you to missed calls (and won't remember if I change the filter settings to "all calls").
Is there a way to change this?

Thanks,
Peter

There's a call history button in the dialer which does that, or you can always press the UP or RIGHT key to get to complete call history while in the dialer.

[Odisej]

Thanks for that :eek: Never knew about that shortcut... guess I should use the buttons more ofter, I like to touch too much :D

Btw, here's a screen from my dialer, I don't see a call history button? Only backspace, videocall and call. That's why I asked :)

http://www.telesat.si/~user072/display_10.bmp


Regards,
Peter

[tnyynt]

Thanks for that :eek: Never knew about that shortcut... guess I should use the buttons more ofter, I like to touch too much :D

Btw, here's a screen from my dialer, I don't see a call history button? Only backspace, videocall and call. That's why I asked :)

http://www.telesat.si/~user072/display_10.bmp


Regards,
Peter

You don't see a call history button because the dialer is the Video call enabled dialer! The call history button (or in some cases, the same video call button but remapped to link to call history) is in the non video call enabled dialer. So for this one use the up/right button trick or access it through menu!

[Odisej]

Nope, dont't think so... (not that I would know of) I got a few gadgets though, PocketPlus (spb), FreeStyl... but I don't remember that anything would include a dialer...
I am running FInixNOver 3.3normal with 1.41.00.11 radio.

Tnx :)

[rockuman_ex]

That don't seem like the dialer from FInixNOver. Have you installed a custom dialer?

i got that dialer from the 3.4 lite version (gray)

[hajali]

Has anybody found a complete solution to the disappearing alphabetical index in contacts yet? I know you can go to "options" and uncheck "alphabetical index", but that only works for some time. Can this issue be fixed entirely?
Thanks

re re re .. ;)

[hashimi]

Thanks for that :eek: Never knew about that shortcut... guess I should use the buttons more ofter, I like to touch too much :D

Btw, here's a screen from my dialer, I don't see a call history button? Only backspace, videocall and call. That's why I asked :)

http://www.telesat.si/~user072/display_10.bmp


Regards,
Peter

Hello sire ..

I tried to explain to Finix about the dialer guess what was his answer !! >> he said don't bother by asking to add this or that !!

and what I did ??

I did not bother using his rom at all

So I searched for a rom that is beautiful as the Cooker's attitude
actually I found it : )

So... forget about it, & if you want.. change the crap dialer with the Diamond dialer

Regards

[alex13182]

Hello sire ..

I tried to explain to Finix about the dialer guess what was his answer !! >> he said don't bother by asking to add this or that !!

and what I did ??

I did not bother using his rom at all

So I searched for a rom that is beautiful as the Cooker's attitude
actually I found it : )

So... forget about it, & if you want.. change the crap dialer with the Diamond dialer

Regards


Hello sire…



It’s great, that you found your beautiful ROM and will stop complaining.

Hope, we will never see you on this tread ever again and will not have a pleasure

to hear you whining.

Thank you very much for stinking up the place.



Regards

[hashimi]

Hello sire…



It’s great, that you found your beautiful ROM and will stop complaining.

Hope, we will never see you on this tread ever again and will not have a pleasure

to hear you whining.

Thank you very much for stinking up the place.



Regards

Did any one talk or complain to you sire
Please stick your nose some were else
& one more thing .. Check your breath first ;)

Best regards..

[tnyynt]

Did any one talk or complain to you sire
Please stick your nose some were else
& one more thing .. Check your breath first ;)

Best regards..

Hold your horses!

First of all:
NOTE: FInixNOver ROMs are not ROMs by request! These ROMs are personal, the cook made them for his own use and the fact that we are using them is an example of his courtesy and will to share!

Second: Cooks can not satisfy every user's needs. We are all different and we all have different tastes and styles. If a cook would even try to satisfy everyone he would probably go crazy within 2 releases. We are here in a place, at the forum, where we are lucky we have the chance of chosing one ROM over another just because of their contents, flavors.

Third and MOST IMPORTANT:
What you did is probably one of the most unfair things one can do by not only disrespecting the cook and his ROM but by advertising another ROM. We don't "crap" each other, nor our works!
An believe me, noone here, neither FInixNOver nor anybody else never replied anyone with an unacceptable attitude from their behalf.

CONCLUSION:
You have two options:
1. be happy with the ROM you are using, it's a fantastic opportunity this forum gives us, the freedom to choice!
2. as my friend FInixNOver used to say: "There's always an option to start learning how to cook". In this case you can make your own ROM and probably, IF you are willing to share, some other unsatisfied disrespectful new user with an attitude will come trashing your work.
I strongly believe an appology would be very welcome, and we, here, are expecting it!

[hashimi]

Hold your horses!

First of all:
NOTE: FInixNOver ROMs are not ROMs by request! These ROMs are personal, the cook made them for his own use and the fact that we are using them is an example of his courtesy and will to share!

Second: Cooks can not satisfy every user's needs. We are all different and we all have different tastes and styles. If a cook would even try to satisfy everyone he would probably go crazy whithin 2 releases. We are here in a place, at the forum, where we are lucky we have the chance of chosing one ROM over another just because of their contents, flavors.

Third and MOST IMPORTANT:
What you did is probably one of the most unfair things one can do by not only disrespecting the cook and his ROM but by advertising another ROM. We don't "crap" each other, nor our works!
An believe me, noone here, neither FInixNOver nor anybody else never replied anyone with an unacceptable attitude from their behalf.

CONCLUSION:
You have two options:
1. be happy with the ROM you are using, it's a fantastic opportunity this forum gives us, the freedom to choice!
2. as my friend FInixNOver used to say: "There's always an option to start learning how to cook". In this case you can make your own ROM and probably, IF you are willing to share, some other unsatisfied disrespectful new user with an attitude will come trashing your work.
I strongly believe an appology would be very welcome, and we, here, are expecting it!

dear tnyynt


I would like to apologize to Finix and for all for Overreacting
for a long time i am fond of Finix & his roms
but this was because the shock of the way Finix replied to me
I respect min a lot ..

hope he & you accept my apology

Regards

[goofy3]

UC doesn't work for me :( I've cabs folder and proper file on SD that i use in 3.2 and 3.3, and there everything was ok. In 3.4, appears screen with progres bar for customization, but in few seconds device self reset.... Anyone got this issue?

[tomme45i]

UC doesn't work for me :( I've cabs folder and proper file on SD that i use in 3.2 and 3.3, and there everything was ok. In 3.4, appears screen with progres bar for customization, but in few seconds device self reset.... Anyone got this issue?

UC works fine for me. I had only problem when I renamed one cab, I forgot to change it in SDConfig, and after that I doesn't have any error message. But this was only my fault. UC works perfectly :)

[goofy3]

UC works fine for me. I had only problem when I renamed one cab, I forgot to change it in SDConfig, and after that I doesn't have any error message. But this was only my fault. UC works perfectly :)

Hmm, so i must check my SDconfig.txt, maybe something is messed up...

[Asfarizal]

Great ROM !!
After 2 hours ..... so far so good :D
Thanks FInixNOver

[FInixNOver]

dear tnyynt


I would like to apologize to Finix and for all for Overreacting
for a long time i am fond of Finix & his roms
but this was because the shock of the way Finix replied to me
I respect min a lot ..

hope he & you accept my apology

Regards

I read your PM from 26/05/2008 again, and I remember answering to that. But I didn't save what I've wrote, but I think it was something like, I can't satisfy everyone, and although I like to have suggestions, I cannot make the ROM this, or that way, just because you say so.
You were not satisfied about the dialer. You have the dialer you like in the Green ROM. It was a personal choice to use to use a different dialer in Gray and Black ROMs.
But that wasn't enough for you. You were also wanting me to add some software that you like to use, and remove the ones you don't use in my ROM. I'm sorry but I can't comply...
I probably also told you that it was an option to start cooking yourself since you were not very pleased with my work, that you were trying to have changed.
I'm sorry if I was so rude in the way I answered you.
I really regret not having my repply, because I'd really like to know what pissed you of. Post my reply here if you can.

[alex13182]

Did any one talk or complain to you sire
Please stick your nose some were else
& one more thing .. Check your breath first ;)

Best regards..

Thank you very much for intelligent and polite response.
What a great way to have a conversation.

[tranquil20]

hi finix..thanx 4 every sweat & hardwork you've sacrificed to share us this cooked ROM,really stable and fast.I have one question though..are we expecting another version & build from u?version 3.5?ü thanx bro..more power!

[hashimi]

I read your PM from 26/05/2008 again, and I remember answering to that. But I didn't save what I've wrote, but I think it was something like, I can't satisfy everyone, and although I like to have suggestions, I cannot make the ROM this, or that way, just because you say so.
You were not satisfied about the dialer. You have the dialer you like in the Green ROM. It was a personal choice to use to use a different dialer in Gray and Black ROMs.
But that wasn't enough for you. You were also wanting me to add some software that you like to use, and remove the ones you don't use in my ROM. I'm sorry but I can't comply...
I probably also told you that it was an option to start cooking yourself since you were not very pleased with my work, that you were trying to have changed.
I'm sorry if I was so rude in the way I answered you.
I really regret not having my repply, because I'd really like to know what pissed you of. Post my reply here if you can.

Good day FInixNOver..

Sorry, but you did not replay any thing to my PM and nothing also about to start cooking my own
I also posted a part of my message here because I thought you are so busy to the point that you did not have any time reading your messages

Here is my suggestions in this post ..
http://forum.xda-developers.com/showpost.php?p=2252016&postcount=27

Then this is what you rot here in this topic ( it looks in general but I am the only one who disturbed you about adding or removing )

Don't bother asking to include this or that, or to remove this program or that app. I'm well aware I can't satisfy everyone, so I'll stick with my own choices

http://forum.xda-developers.com/showpost.php?p=2261374&postcount=39


This was my replay to your post

http://forum.xda-developers.com/showpost.php?p=2262637&postcount=42

And to tell you that not only me who would like the old dialer but there are lots of posts that include my suggestions, for example the one I replied for and others like this one
http://forum.xda-developers.com/showpost.php?p=2262656&postcount=43


These were the conditions that frustrated and pissed me

And about the option to start cooking my own rom , it is a pleasure to compete with a teacher like you

Again, sorry for everything


Regards

[rw2902]

let's put down our sword,get back to the ROM itself,no more side talking,making a peacful forum,OK:):)

[hashimi]

let's put down our sword,get back to the ROM itself,no more side talking,making a peacful forum,OK:):)

:) every thing is ok it is just some admonition between brothers

:rolleyes: Regards

[rw2902]

:) every thing is ok it is just some admonition between brothers

:rolleyes: Regards

insala;):eek:

[hashimi]

insala;):eek:

:D
insala ;)

[tnyynt]

insala;):eek:

:D
insala ;)

Could you please stop all the useless posts?
...AND DON'T REPLY TO THIS! LET'S STOP IT HERE!

[msiviter]

The network notification of answerphone status simply arrive as an sms with the title "'delta'@" where delta is the greek symbol. It doesn't change the answerphone symbol on the top of the today screen.

Any ideas on how to fix.

The ROM is brilliant! Thanks FInixNOver

It's the 6.1 black ROM

[fun2me]

verry nice like always.

However, during one week testing I recognised some problems while establishing a phonecall, the call was closed at establishment, that is why I went back to 3.3 Normal.
Does anybody recognised the same problem?

[tnyynt]

verry nice like always.

However, during one week testing I recognised some problems while dialing to phonecall closed before real establishment, that is why I went back to 3.3 Normal.

Never experienced it. Can you tell us exactly what steps you took until this "bug" appeared? Any third parties installed?

[FInixNOver]

Good day FInixNOver..

Sorry, but you did not replay any thing to my PM and nothing also about to start cooking my own
I also posted a part of my message here because I thought you are so busy to the point that you did not have any time reading your messages

Here is my suggestions in this post ..
http://forum.xda-developers.com/showpost.php?p=2252016&postcount=27

Then this is what you rot here in this topic ( it looks in general but I am the only one who disturbed you about adding or removing )



http://forum.xda-developers.com/showpost.php?p=2261374&postcount=39


This was my replay to your post

http://forum.xda-developers.com/showpost.php?p=2262637&postcount=42

And to tell you that not only me who would like the old dialer but there are lots of posts that include my suggestions, for example the one I replied for and others like this one
http://forum.xda-developers.com/showpost.php?p=2262656&postcount=43


These were the conditions that frustrated and pissed me

And about the option to start cooking my own rom , it is a pleasure to compete with a teacher like you

Again, sorry for everything


Regards

I'm sorry, my mistake. I know I've answered to someone regarding some similar subject, so I thought it was you.
Well, never mind that.
To give a final answer:
I'm already providing the ROM in 3 different colors, and the green one has the dialer you want. Do you have an idea of how many versions I would have to make just to keep everyone happy?
If I were to please you, then I would have to make a green skin for the dialer used in the gray and black ROMs, so I would end up with 12 different versions
4 ROM per color -> 2 light and 2 normal -> 1 for each dialer for both light and normal. This is just insane!!!:o
Don't get me wrong, I'm not mad or angry or anything. I'm just trying to explain the facts.
I made the gray one with a different dialer for 2 main reasons
1 - It was the ROM I was using (before I made the black skin pack)
2 - I like that dialer better (that's why I kept it in the black skin pack)
In addition to this, including the dialer with the call history button, would mean more work for me because I would have to remake the smartdialing part of the skin.
About the adding and removing of apps, I can tell you that I find the selection of apps in the ROM to be well balanced, because there are already other ROMs to choose from, if you want a ROM filled with software.
If you wish to start cooking, I can only congratulate you for it, and ultimately tell you that I'm not here to compete against anyone. I came to this forum, to learn, and give some contribution whenever I can.
I can offer you my limited knowledge if you have some question through PM.

The network notification of answerphone status simply arrive as an sms with the title "'delta'@" where delta is the greek symbol. It doesn't change the answerphone symbol on the top of the today screen.

Any ideas on how to fix.

The ROM is brilliant! Thanks FInixNOver

It's the 6.1 black ROM

Can you explain a bit more or provide a screenshot, so I can know what you mean?
Thanks.

[lula6894]

I say again: for me the only change is to write the owner name and I can do it by myself.
Very good job FInixNOver, go ahead ....
:):):)

[hajali]

FInixNOver, you are the best man ... well said ..
one thing .. how did u get the mms to be fully working ... ?

and is there away to get htc random access fixed ?

[FInixNOver]

FInixNOver, you are the best man ... well said ..
one thing .. how did u get the mms to be fully working ... ?

and is there away to get htc random access fixed ?

I got the MMS to fully work once I made some changes to the OEM part of the ROM, but I'm not completely sure if some file was missing before, or if it was due to different dll versions, all that matters is, that in the end it's working (really, I can't say for sure what fixed it because I was messing with the OEM part for a while).

About random access, I still haven't found a definitive fix for it rather than the one already posted here, which doesn't work all the time. It's hard when one doesn't have developer/programmer skills (I mean, maybe it would help... or not...)

[FeRoX80]

@FInixNOver

Hi, I'm writing from Italy, so sorry for my English.
This ROM is perfect, i tried all ROMS, but this is the best of all...
But I remember that in the 3.2 rom, there was 28 MB of ram free, and also the rom was more faster than 3.4 and 3.3 versione... why?
and at least, I tried to install "Patched HTCHomeDll+all_ITA_Cityes" on this ROM, but after I install this cab, nothing change, then I tried to copy the file "HH_0410_WeatherCities" in windows folder, to change the cities in the weather... but nothing... what I have to do?

All 2 files are upload in this post...maybe you want to try it...
Thanks...

(FInixNOver I speak spanish... so if you understand it, I can write in spanish... is more easy for me :D )

[tnyynt]

@FInixNOver

Hi, I'm writing from Italy, so sorry for my English.
This ROM is perfect, i tried all ROMS, but this is the best of all...
But I remember that in the 3.2 rom, there was 28 MB of ram free, and also the rom was more faster than 3.4 and 3.3 versione... why?
and at least, I tried to install "Patched HTCHomeDll+all_ITA_Cityes" on this ROM, but after I install this cab, nothing change, then I tried to copy the file "HH_0410_WeatherCities" in windows folder, to change the cities in the weather... but nothing... what I have to do?

All 2 files are upload in this post...maybe you want to try it...
Thanks...

(FInixNOver I speak spanish... so if you understand it, I can write in spanish... is more easy for me :D )

Are you sure the original files are properly overwritten?

[FeRoX80]

this is the problem, I can't overwrite the original files, and also the ".cab" can't overwrite the original files... I think because files are USED, I tried to close HTC HOME and overwrite files, but didn't change anything... I don't know whats the problem...

[tnyynt]

this is the problem, I can't overwrite the original files, and also the ".cab" can't overwrite the original files... I think because files are USED, I tried to close HTC HOME and overwrite files, but didn't change anything... I don't know whats the problem...

Try to:
1. disable Home plugin
2. soft reset
3. try installing the cabs
4. soft reset
5. reenable the Home plugin.

If no joy, then between 2 and 3 try renaming the original files.
Also check if cab is set to overwrite original files.

[FeRoX80]

thanks now I try...

[FeRoX80]

I found a problem, the file that the ".cab" file wants to install is "HH_0410_WeatherCities.xml" but the file used by HTC HOME is "HH_0409_WeatherCities.xml... So I tried to rename my file, and then overwrite the original file (before I disabled HTC HOME and made a soft reset), but I can't overwrite the file, or delete the file... the same problem appears.

[tnyynt]

I found a problem, the file that the ".cab" file wants to install is "HH_0410_WeatherCities.xml" but the file used by HTC HOME is "HH_0409_WeatherCities.xml... So I tried to rename my file, and then overwrite the original file (before I disabled HTC HOME and made a soft reset), but I can't overwrite the file, or delete the file... the same problem appears.

The codes stand for localized versions:
0409 USA English
0410 ITA Italian
As for the file being in use, try copying it then with Resco Explorer or TotalCommander.

[FeRoX80]

So, now I installed the CAB, and in Windows folder there is my file HH_0410_WeatherCities.xml, but Weather (on HTC HOME) don't add new cities.
as I said, I tried to rename the file, deleting the default file, overwrite him (with totalcommander), but I couldn't see the new cities in the weather. :(
This is the only problem that I have with this ROM... the others things are perfect!

[tnyynt]

So, now I installed the CAB, and in Windows folder there is my file HH_0410_WeatherCities.xml, but Weather (on HTC HOME) don't add new cities.
as I said, I tried to rename the file, deleting the default file, overwrite him (with totalcommander), but I couldn't see the new cities in the weather. :(
This is the only problem that I have with this ROM... the others things are perfect!

I believe you need the file inside the cab to be renamed to 409.
Also my knowledge stops here, so if this is not working we'll have to wait for a reply from FInixNOver.

[ahajdu]

I have a similar problem. I have installed version 3.4 and it works very well but for some reason igo8 starts but runs out of memory even though I have 22-25 megs free ram. I know that this is not an igo t hread, if there is a forum for FInixNOver rom and igo, I would love to read that too.
Thanks

[tnyynt]

I have a similar problem. I have installed version 3.4 and it works very well but for some reason igo8 starts but runs out of memory even though I have 22-25 megs free ram. I know that this is not an igo t hread, if there is a forum for FInixNOver rom and igo, I would love to read that too.
Thanks

There is no such thread and there's no use creating one. There were some discussions about the iGo in this thread, no need to expand them, there were several split opinions, read through the thread and you will see.
Also, here (http://navngo.com/pages/global/eng/igo_8_description) are the system requirements for iGo 8:

Minimum System Requirements:
• Microsoft® Windows Mobile™ operating system
• 300 MHz processor (400 MHz recommended)
• 64 MB memory (128 MB recommended)
• QVGA or VGA touch screen display
* Please note that by minimum 64 MB memory, they are referring to free memory not theoretical hardware available memory. The fact that it starts on some ROMs is attributed to the fact that at that moment the device has 28-29 MB free RAM. The app will crash anyway, even with 3D off.

Also, here (http://navngo.com/pages/global/eng/igo_8_supported_devices) are the supported devices.

Hope this concludes the chain of questions regarding iGo 8. Note that the P3600 Trinity and the P3600I Trinifin are not mentioned, even though the latter might have a go with this app.

Trinities, they just don't have enough RAM to run it, people should come to face this.

[androme]

No VOIP inside ? :(

[cyron_at]

No VOIP inside ? :(
Sure! In Comm manager: Internet telephony !

[androme]

Sorry i'm in wrong post.

[joncgde2]

Trinities, they just don't have enough RAM to run it, people should come to face this.

I've noticed some simple things you can do to run it without any issues.

1. Don't use TTS (where the street names are mentioned) - takes up too much memory.

2. Turn all display settings to their lowest. This way you only have the streets.

3. Don't have the elevation datasets loaded.

4. Don't have 324325 apps running in the background all the time.


If you do these things, iGo8 should run fine without issue. I've used it for many trips without any hiccups.


Yes it can be a *tad* slow at times, like where you turn street corners and it gets a tiny bit jerky, but for 85% of the trip it works well with no problems.

[tnyynt]

I've noticed some simple things you can do to run it without any issues.

1. Don't use TTS (where the street names are mentioned) - takes up too much memory.

2. Turn all display settings to their lowest. This way you only have the streets.

3. Don't have the elevation datasets loaded.

4. Don't have 324325 apps running in the background all the time.


If you do these things, iGo8 should run fine without issue. I've used it for many trips without any hiccups.


Yes it can be a *tad* slow at times, like where you turn street corners and it gets a tiny bit jerky, but for 85% of the trip it works well with no problems.

Trip and route lenght?

[mousio]

I recognised some problems while establishing a phonecall, the call was closed at establishment, that is why I went back to 3.3 Normal.I sometimes experience the same, depending on whether I use my magicsim and which sim card I use with it; I can get around the problem by disabling 3G, though all is supposed to be "3G compatible" *sigh*
So, try again with 3G disabled?

[FInixNOver]

I found a problem, the file that the ".cab" file wants to install is "HH_0410_WeatherCities.xml" but the file used by HTC HOME is "HH_0409_WeatherCities.xml... So I tried to rename my file, and then overwrite the original file (before I disabled HTC HOME and made a soft reset), but I can't overwrite the file, or delete the file... the same problem appears.

First you cannot delete the HH_0409_WeatherCities.xml since it's a ROM file.
Now what yo can do is:
Like tnyynt said, before doing anything, disable HTC Home in Settings->Today.
After that, with a file explorer like Totalcommander, there's some file operations you can make.
1 - If you have already installed you cab with the HH_0410_WeatherCities.xml file, go to Windows folder and move it somewhere else. Rename it to HH_0409_WeatherCities.xml, and copy it back to Windows folder in order to replace the existing one.
2 - You must know if this is the only file that the cab puts into Windows folder, because, if you replace HTCHome.dll with another that doesn't support more cities, you're back to square one.

[aceituna]

Help. How I can deactivate the rear speaker when I use skype or sjphone? Thanks

[atropo]

You can't.
Bye

[ahajdu]

OK but on the original wm5 rom it used to work. I travelled 1200 kms round trip for 9 hours per trip and it worked OK - with a few soft resets then and again, but now as soon as I press a button after loading it waits 10 minutes to respond. Also IGO6 does not work now either (same problem). I reinstalled the original rom after trying it w/ wm6.1 and it never worked again. I have 25 megs of free ram which should be enough and it still does not work.

[FeRoX80]

Thanks FInixNOver, Totalcommander give me an error, when I tried to delete the default file, I also tried to rename and then overwrite, like you said, but magicaly appaers 2 files with the same name and Weather used default file :D and my file don't rename the dafault file... I think the problem is that this file is in the ROM, or something like this... It have like a protection... I don't know.
If I can I will try with resco explorer...
thanks for support.

[sszz]

Hi,

the booting time of my device has been increased to approx. 3 minutes from ver. 3.2 on. Is that normal? I'm using the same programs since ver. 3.1.1 so the issue must be related to the ROM.

BatteryStatus and Ultimate Launch are installed and I also noticed that when I switch UltimateLaunch off in the Today menu (no plugins displayed) and restart the device, it boots noticeably faster (approx 2 minutes - still very slow compared to ver. 3.1.1 WITH UltimateLaunch switched ON).

Any ideas?

Thanks in advance.

[atropo]

Try removing battery status.
Bye

[tnyynt]

Hi,

the booting time of my device has been increased to approx. 3 minutes from ver. 3.2 on. Is that normal? I'm using the same programs since ver. 3.1.1 so the issue must be related to the ROM.

BatteryStatus and Ultimate Launch are installed and I also noticed that when I switch UltimateLaunch off in the Today menu (no plugins displayed) and restart the device, it boots noticeably faster (approx 2 minutes - still very slow compared to ver. 3.1.1 WITH UltimateLaunch switched ON).

Any ideas?

Thanks in advance.

Something is really messing up you system. I have a boot up time of 32 seconds. Try removing 3rd parties or check registry and DEVICE\Windows\StartUp folder to see what programs autostart.
Also, reducing the number of today screen plugins reduces boot time.

[Kloss]

I'm just installed Pocket Plus 4 and SPB Weather 1.7.4. The boot time now really long, about 90s :eek:
Before I installed this programs, the boot time was 30-40s.

[Rathje]

Hi
I'm using 6.1 Black light.
Has anyone experienced that when you reply to an SMS in conversation mode it often gets stuck. Result is you cant send and sometimes you can quickly save to draft and then soft reset and find your SMS text again. After reset you can send your SMS.
The problem seems to occur more often if you reply with larger SMS'es (2+ text messages)
Lars

[drlalitbida]

can i use this with my p3300 after cid unlocking

[tnyynt]

can i use this with my p3300 after cid unlocking

No, this is intended for 3600!

[Nights_Ice]

Too long for my D810.
I have my Atom pure also install WM 6.1 with same 3rd party software but my D810 took almost 2 times to bootup..
but so far no problem with is ROM.
I need the battery status so no chose> have to monitor my out going call

[drlalitbida]

thanks for the information

[yuxiaoyun]

the best rom ,the best man:D

[jojithomas]

Thanks for the Rom. I must say that Flnix got the best BTP among all cooked roms.

Still trying out. Findings so far...
1. Speed Dial missing in Dial Pad. Any way to Add This? Even ok to replace video call button with speed dial.
2. Some times.. reponse time very slow & hangs eventually.. when accessing some application.. after reset works normally.

[tnyynt]

1. Speed Dial missing in Dial Pad. Any way to Add This? Even ok to replace video call button with speed dial.

You mean this?

http://img26.picoodle.com/img/img26/4/6/19/f_display1m_3d9c6d6.png

2. Some times.. reponse time very slow & hangs eventually.. when accessing some application.. after reset works normally.

Not experiencing this. What applications are that? No, no, don't name them, I'm just saying that it's not the ROM's fault, it's the apps.

[jojithomas]

tnyynt: You mean this?

http://img26.picoodle.com/img/img26/4/6/19/f_display1m_3d9c6d6.png



Yes. This one. Flniz Rom Gray Normal doesn't have this button in Dial Pad. Is there any way i can add this?

[tnyynt]

Yes. This one. Flniz Rom Gray Normal doesn't have this button in Dial Pad. Is there any way i can add this?

No, but you can access it from the Menu in the dialer.

[upgrade]

Great ROM, thnx for your work.

I have a little problem with reminders. At some point, randomly, the reminders don't appear anymore and, of course, nor the sounds.
After hard reset, everything is fine, but after a while the problem reappears.
Anyone having this problem?

[xitulofica]

Hello all
I'm sorry to double post, i posted this in the FInixNOver 3.3 Black Edition Forum, but for you guys that don't check that forum since the 3.4 is real, here it goes:
I want to give my contribution to that anoying bug of start menu popup.
Check this out: http://forum.xda-developers.com/showthread.php?t=370478
If you read the forum you see that some people report it works and others say they didn't noticed any difference.
But I have to say that for me that problem was commom. Not all the time, randomly, but it happened and it was a pain in the...
So I tried that program and since then it never happened again. So I advise all of you who have this problem to try it. If it doesn't work you don't loose anything.
Hope it works like it worked for me.
Bye

[queer~dude]

First off, FInixNOver deserves respect!
After using a week of FInixNOver3.4 Light WWE6.1, i think it's quite stable but some application may not working properly, mine is RandomAccess. It sometimes appears, sometimes not. In gernal, i have quite many third party applications installed and found no problem, it just hang sometimes though....ok....there's a feedback i saw previously says about the bootup time...yes it's true that it takes pretty much booting up to Windows....personally i observe that Win6.1 and 6.0 in comparion of Ram usage i found 6.0 is much less than 6.1....actually i've been using FInixNOver3.0.2 Lite WWE6.0 since its release...brilliant it's damn fast and stable like hell...plus netframe work3.0..wow.....so i finally returned to FInixNOver3.0.2 Lite.......
cheers.............

[gmerab2003]

I have HTC p3600 and I have tested all possible ROMs for Trinity, starting from 6.0 till 6.1 and at last I found FInixNOver3.2 and now I have installed the FInixNOver3.4 Normal - Black one. I can say that this ROm is very nice, stable and easy to use. I have installed 24 different applications and all of them working properly. The main problem which was solved with this ROM is a sync problem with other ROMs, whichj was arising any time with any other ROMs. So I want to say thankful words to Finix for such very powerful ROM and to continue such success work for our happiness. YOU ARE THE GREAT SPECIALIST AND GOOD PERSON (I have read all threads and you are answering in a very good manner and in time).

[nihil0]

This is a great ROM. I use the Gray Light version. Thank you at first!

But some issues:

1.) Mail-Attachement and IE Cache on SDCard:
I think it is not enough to set some paths with the Advanced Config. Here a little Mort Script example to set all the things back to the default:

RegDelete( "HKCU", "Software\Microsoft\MAPI", "PropertyPath" )
RegDelete( "HKCU", "Software\Microsoft\MAPI", "AttachPath" )
RegDelete( "HKLM", "System\Inbox\Settings", "PropertyPath" )
RegDelete( "HKLM", "System\Inbox\Settings", "AttachPath" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"History", "\Windows\Profiles\guest\History" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"Cookies", "\Windows\Profiles\guest\Cookies" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"Cache", "\Windows\Profiles\guest\Temporary Internet Files" )

2.) I get no SMS sound if I get an SMS.

3.) Very long boot duration if BatteryStatus Plugin is installed and activated.

4.) Smart Dial colors are unuseable (at least for me). Dark on dark is not readable. Hier a Mort Script, how to change:

RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrNormal", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrDupCallLog", HexToNumber( "00ffff00" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatch", HexToNumber( "00000000" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchText", HexToNumber( "0080ff80" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrHI", HexToNumber( "00000000" ) )
#RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLHI", HexToNumber( "00ff8080" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchSelHI", HexToNumber( "00000000" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchSelText", HexToNumber( "0080ff80" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLInvert", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLNormal", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrInvert", HexToNumber( "00ffffff" ) )

But also with the changed colors the already called numbers are not showed with the right collor (clrDupCallLog - yellow in the Mort Script). They are simply white.


I added the MortScripts in the attachement. The third script sets the performance related registry values (Caching, Animations, ect.).

[mospdude]

I've noticed that I can greatly increase the chances of the RandomAccess appearing in Contacts if I ensure "tmail.exe" (ie Messaging) is closed from the Task Manager first before starting Contacts.

Edit: forgot to say I think this is the most stable ROM so far. Cheers :)

[Rathje]

Hi
I'm using 6.1 Black light.
Has anyone experienced that when you reply to an SMS in conversation mode it often gets stuck. Result is you cant send and sometimes you can quickly save to draft and then soft reset and find your SMS text again. After reset you can send your SMS.
The problem seems to occur more often if you reply with larger SMS'es (2+ text messages)
Lars
Hello! - any reactions to this one about SMS problem?
Best regards
Lars

[tnyynt]

This is a great ROM. I use the Gray Light version. Thank you at first!

But some issues:

1.) Mail-Attachement and IE Cache on SDCard:
I think it is not enough to set some paths with the Advanced Config. Here a little Mort Script example to set all the things back to the default:

RegDelete( "HKCU", "Software\Microsoft\MAPI", "PropertyPath" )
RegDelete( "HKCU", "Software\Microsoft\MAPI", "AttachPath" )
RegDelete( "HKLM", "System\Inbox\Settings", "PropertyPath" )
RegDelete( "HKLM", "System\Inbox\Settings", "AttachPath" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"History", "\Windows\Profiles\guest\History" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"Cookies", "\Windows\Profiles\guest\Cookies" )
RegWriteString( "HKCU", "Software\Microsoft\Windows\CurrentVersion\Explorer \Shell Folders", \
"Cache", "\Windows\Profiles\guest\Temporary Internet Files" )

2.) I get no SMS sound if I get an SMS.

3.) Very long boot duration if BatteryStatus Plugin is installed and activated.

4.) Smart Dial colors are unuseable (at least for me). Dark on dark is not readable. Hier a Mort Script, how to change:

RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrNormal", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrDupCallLog", HexToNumber( "00ffff00" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatch", HexToNumber( "00000000" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchText", HexToNumber( "0080ff80" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrHI", HexToNumber( "00000000" ) )
#RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLHI", HexToNumber( "00ff8080" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchSelHI", HexToNumber( "00000000" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrMatchSelText", HexToNumber( "0080ff80" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLInvert", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrFLNormal", HexToNumber( "00ffffff" ) )
RegWriteDWord( "HKLM", "Software\HTC\SmartDialing", "clrInvert", HexToNumber( "00ffffff" ) )

But also with the changed colors the already called numbers are not showed with the right collor (clrDupCallLog - yellow in the Mort Script). They are simply white.


I added the MortScripts in the attachement. The third script sets the performance related registry values (Caching, Animations, ect.).

I'd be happy to reply this but I am using the Green version (even though I know my friend FInixNOver built them the same). Anyway:

1. Schap's Advanced Configuration should be enough. From what I see you've posted as a Mort script, you are setting the defaults to the already defaulted paths in the ROM and in WM6.x itself (???).
Trust me, you can use Schap's Advanced Configuration to change that!

2. Have you turned it on in Settings, Sounds & Notifications, Notifications?

3. It has been discussed earlier. The bottom line: the more today plugins, the slower the boot and especially with BatteryStatus initializing. Normal stock boot of all 3.4 ROMs is > 35 sec.

4. This is a personal thing of your device/eyes, I will not comment it, you are free to customize the colors even though the colors are right! (you sure something did not mess them up?)

5. Took a look at the script attached related to performance. Now, to make things clear: default FInixNOver values are optimal for ballanced performance/stability usage. In other words, anything beyond would have a stability side effect. So: I see you have lowered the glyph cache --> slowdown; cleared the cache for FATFS --> slowdown --> though you are setting default cache size from 4096 to 4096 (???); lowered the ReplStoreCacheSize --> slowdown. Is it me or ar you really trying to hold the ROM's speed back?


Hi
I'm using 6.1 Black light.
Has anyone experienced that when you reply to an SMS in conversation mode it often gets stuck. Result is you cant send and sometimes you can quickly save to draft and then soft reset and find your SMS text again. After reset you can send your SMS.
The problem seems to occur more often if you reply with larger SMS'es (2+ text messages)
Lars

Hello! - any reactions to this one about SMS problem?
Best regards
Lars

We saw your post(s) Rathje.
To be honest, I have not experienced this but the messaging app, in it's threaded mode, usually saves as draft even in you don't actually reply to an sms, but you just simply tap on the text field.
Now regarding your problem, are you sure it is not a problem with reception or communication between your device and the service provider, so you are not being able to send it?
One way you could test is when you experience this again, do not soft reset, simply go to the Drafts folder and try to send again from there.
The other thing you might do is temporarily disable threaded mode in the sms app by applying the registry settings below:


[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSAvailable"=dword:0


Note: You can return to threaded sms by changing back the dword value of the string to "1".

[hajali]

I tried some FInixNOver roms today ... here are the mem status



FInixNOver 3.4 green
storage 61.20
program 25.5
(looks great ... i thought green is emmm ... but when i tried it ... it just clicked ... and now it's my favorite theme color)


FInixNOver 3.4 black
storage 62.87
program 25.38
(this theme just rocks ... it has quality written all over its bright black face .. but still green is better)

FInixNOver 3.4 gray
storage 62.18
program 25.29
(I thought this would be the one ... as i used to love the gold (black-gray-gold) ... but it was kinda so so ... it didn't have the oomff of the black nor the weeeee of the green)

FInixNOver 3.4 (the most (almost) perfect 6.1 there is)
issues (only HTC random access has a mind of its own)


FInixNOver 3.0.2 gold
storage 68.29
program 28.65
the most (almost) perfect 6.0 there is ...
the theme ... is cool as hell ... nuff said!!!

issues (bluetooth limitation .. > 2mb and ur stuck)

just wanted to post the memory status ... for obsessed ppl (like me) ;)

[Rathje]

We saw your post(s) Rathje.
To be honest, I have not experienced this but the messaging app, in it's threaded mode, usually saves as draft even in you don't actually reply to an sms, but you just simply tap on the text field.
Now regarding your problem, are you sure it is not a problem with reception or communication between your device and the service provider, so you are not being able to send it?
One way you could test is when you experience this again, do not soft reset, simply go to the Drafts folder and try to send again from there.
The other thing you might do is temporarily disable threaded mode in the sms app by applying the registry settings below:


[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSAvailable"=dword:0


Note: You can return to threaded sms by changing back the dword value of the string to "1".[/QUOTE]

Thankyou very much for your answer!
I will try and test following your recommendations.
BUT already now I can add that when it happens these are my options/actions:
- Sometimes I can force a save to draft folder before I simply need to reset
- Often I need to reset anyway, because most other applications also lock
- If I get it saved to draft folder it looks as if the sms is there with titel, receiver etc, but once I try to open that draft I only get blank titel+text. In some cases I can even open and see the text, but I can't send - it's kind of locked/frozen
- When I close that draft, it eraises my text.
- The only safe way I can recover my text is to copy the writen text and then open OneNote and paste it in plus save it before I reset. After reset I can copy paste from OneNote back to sms-text and then suddenly send (very combersome + some of my previous text messages in the conversation are gone - so what benefit do I then have from a conversation, where parts are lost ;-)

OK, maybe not a good consistent test or repro, but I'm very curious if anyone else is experiencing this. At least I think I will try your suggestion of disabling conversation.

Thanks again - I'll revert after some more testing
Lars

[Rathje]

I'd be happy to reply this but I am using the Green version (even though I know my friend FInixNOver built them the same). Anyway:

1. Schap's Advanced Configuration should be enough. From what I see you've posted as a Mort script, you are setting the defaults to the already defaulted paths in the ROM and in WM6.x itself (???).
Trust me, you can use Schap's Advanced Configuration to change that!

2. Have you turned it on in Settings, Sounds & Notifications, Notifications?

3. It has been discussed earlier. The bottom line: the more today plugins, the slower the boot and especially with BatteryStatus initializing. Normal stock boot of all 3.4 ROMs is > 35 sec.

4. This is a personal thing of your device/eyes, I will not comment it, you are free to customize the colors even though the colors are right! (you sure something did not mess them up?)

5. Took a look at the script attached related to performance. Now, to make things clear: default FInixNOver values are optimal for ballanced performance/stability usage. In other words, anything beyond would have a stability side effect. So: I see you have lowered the glyph cache --> slowdown; cleared the cache for FATFS --> slowdown --> though you are setting default cache size from 4096 to 4096 (???); lowered the ReplStoreCacheSize --> slowdown. Is it me or ar you really trying to hold the ROM's speed back?






We saw your post(s) Rathje.
To be honest, I have not experienced this but the messaging app, in it's threaded mode, usually saves as draft even in you don't actually reply to an sms, but you just simply tap on the text field.
Now regarding your problem, are you sure it is not a problem with reception or communication between your device and the service provider, so you are not being able to send it?
One way you could test is when you experience this again, do not soft reset, simply go to the Drafts folder and try to send again from there.
The other thing you might do is temporarily disable threaded mode in the sms app by applying the registry settings below:


[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSAvailable"=dword:0


Note: You can return to threaded sms by changing back the dword value of the string to "1".
.. by the way: I can't find any SMSAvailable or dword in that folder you mention. Should I then just add it to the settings folder?
There is another folder on the same level as Settings, that is called SMSText. Is it here I should add the dword?
Best regards
Lars

[tomato18]

i managed to turn off threaded sms by changing SMSAvailable=0 but the incoming sms sound does not play at all. i changed the registry back to "1" and the incoming sms sound works again. does this happens to anyone?

[zh.dayong]

You Are The Great Specialist And Good Person :d

[WM_69]

SO far i'm quiet happy with this version. Eventhough sometimes messaging gets slow or hang. Overall nice rom. Wish if i had more space for programs in my RAM.

[WM_69]

In one months time, i have flashed 12 ROMS over here and I would give Your ROM a Thumbs UP above all. Good Work. Am using Gray Version.

I am looking forward to your next release v4.0. And i would be much grateful if you focus mainly over two issues.
1. Increased Performace
2. More space for Programs rather than storage. SO that Trinity would run any application smooth.

If the above two are added to your current v3.4; i must say you will beat the Rest.

[Rathje]

i managed to turn off threaded sms by changing SMSAvailable=0 but the incoming sms sound does not play at all. i changed the registry back to "1" and the incoming sms sound works again. does this happens to anyone?
Yes, I also got it to work switching conversation off and then back.
Now I'm excited to see if it solves my sms-issues. Need some more testing time and will revert.
Thanks all

[lyonbryan]

I have done 5-6 different ROMS and really want this one; However after excuting the ROMUpdateUtility.exe and giving permission "yes," it goes to the bootloader and just stays there and then i get the error 260 connection error. Any ideas?

Info of my Trinity:
TRIN100 IPL-0.50
TRN100 SPL-1.07.0000
OS- 5.1.465 BUILD: 15673.3.3.1
RADIO: 1.38.00.11

Thanx:)

[WM_69]

I have done 5-6 different ROMS and really want this one; However after excuting the ROMUpdateUtility.exe and giving permission "yes," it goes to the bootloader and just stays there and then i get the error 260 connection error. Any ideas?

Info of my Trinity:
TRIN100 IPL-0.50
TRN100 SPL-1.07.0000
OS- 5.1.465 BUILD: 15673.3.3.1
RADIO: 1.38.00.11

Thanx:)

Without changing anything on the phone, restart RomUpdateUtility again and there it goes..:D

[WM_69]

When the alarm activates; there is no message popup that has an option to Snooze or Dismiss the Alarm. Anyone knows how to fix this?

[lyonbryan]

I have done 5-6 different ROMS and really want this one; However after excuting the ROMUpdateUtility.exe and giving permission "yes," it goes to the bootloader and just stays there and then i get the error 260 connection error. Any ideas?

Info of my Trinity:
TRIN100 IPL-0.50
TRN100 SPL-1.07.0000
OS- 5.1.465 BUILD: 15673.3.3.1
RADIO: 1.38.00.11

Thanx

Without changing anything on the phone, restart RomUpdateUtility again and there it goes..:D

:( Still same error. 260 connection error. My phone is fine when i hit reset, it starts back up normally. I can do other roms but have came across one or 2 where i have the same problem and this is one of them. Is it something to do with SPL? (kinda behond my knowledge.) I'm stumped! :confused:

Again my P3600's info:
TRIN100 IPL-0.50
TRN100 SPL-1.07.0000
OS- 5.1.465 BUILD: 15673.3.3.1
RADIO: 1.38.00.11

[nihil0]

I'd be happy to reply this but I am using the Green version (even though I know my friend FInixNOver built them the same). Anyway:

1. Schap's Advanced Configuration should be enough. From what I see you've posted as a Mort script, you are setting the defaults to the already defaulted paths in the ROM and in WM6.x itself (???).
Trust me, you can use Schap's Advanced Configuration to change that!

2. Have you turned it on in Settings, Sounds & Notifications, Notifications?

3. It has been discussed earlier. The bottom line: the more today plugins, the slower the boot and especially with BatteryStatus initializing. Normal stock boot of all 3.4 ROMs is > 35 sec.

4. This is a personal thing of your device/eyes, I will not comment it, you are free to customize the colors even though the colors are right! (you sure something did not mess them up?)

5. Took a look at the script attached related to performance. Now, to make things clear: default FInixNOver values are optimal for ballanced performance/stability usage. In other words, anything beyond would have a stability side effect. So: I see you have lowered the glyph cache --> slowdown; cleared the cache for FATFS --> slowdown --> though you are setting default cache size from 4096 to 4096 (???); lowered the ReplStoreCacheSize --> slowdown. Is it me or ar you really trying to hold the ROM's speed back?


Thank you for the answer! :-)

1.) Schap's Advanced Configuration was for me unfortunately not enough. I tryed.

I changed the 3 registry entries: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders\History , \Cache, \Cookies

I also selected the "do not use the SD card" in the mail program. But after that the SD card was still used.

So I found out, that this must also be deleted:
HKCU\Software\Microsoft\MAPI\AttachPath, \PropertyPath
HKLM\System\Inbox\Settings\AttachPath, \PropertyPath

After deleting these 4 reg entries, the SD card was not used anymore.

2.) Here I found out, that the SmileSMS program was the problem. I deleted it, and the SMS signall is working now.

3.) I think, in general you are right. But the FInixNOver 3.2 has no problem with the BatteryStatus plugin. The 3.3 and the 3.4 are unuseable if this plugin is installed. So I downgraded to 3.2.

4.) I think, black font color on dark grey background is in sunlight for nobady readable. Maybe for others is the not readable information not important? :-)

5.) I only tried to optimize the device for speed and for stability. So I turned off the file system cache, to ensure that by a reset no informations will be lost.

[nick_d]

Quick question in terms of this ROM and running a later version of ArcsoftMMS - I noticed in the 3.3 ROM that when I get an mms, it doesn't come up with the contact name, just the international version of the phone number (although when you open it, you do see the contact name in the message details, only it never updates to link that message with the contact in the threaded messages screen)...in Australia mobile numbers are 04xxxx, whereas when I get an mms, I get the international +614xxx.

This isn't the case when I send an mms though, as it obviously pulls the details from the contacts database and tags the mms to that particular contact...

Anyone noticed this in v3.4? Or is there a reg tweak I can do to resolve this? I wasn't sure whether it was something linked to the threaded messages or not, and whether the reg edit to un-thread the messages might fix it.

It isn't a major thing, more of an annoyance, but if it's a simple fix I might as well do it...just thought I'd see if anyone knew.

Thanks

[abuzeyad]

In one months time, i have flashed 12 ROMS over here and I would give Your ROM a Thumbs UP above all. Good Work. Am using Gray Version.

I am looking forward to your next release v4.0. And i would be much grateful if you focus mainly over two issues.
1. Increased Performace
2. More space for Programs rather than storage. SO that Trinity would run any application smooth.

If the above two are added to your current v3.4; i must say you will beat the Rest.


I total agree with the second issue.

[Rathje]

Yes, I also got it to work switching conversation off and then back.
Now I'm excited to see if it solves my sms-issues. Need some more testing time and will revert.
Thanks all
Hi
After some testing I can say SMS still hang, as previously described, by every 5th - 10th SMS I send. This is independent of whether I cut off conversation or not.
I'm running black light
Best regards
Lars

[WM_69]

Hi
After some testing I can say SMS still hang, as previously described, by every 5th - 10th SMS I send. This is independent of whether I cut off conversation or not.
I'm running black light
Best regards
Lars

SMS Hang might be there for Normal Version. I was using Gray Normal and i faced SMS Hang some times. Then change to Gray Light. Its been 3 days. No problems so far. You may try Gray Light.

[FInixNOver]

In one months time, i have flashed 12 ROMS over here and I would give Your ROM a Thumbs UP above all. Good Work. Am using Gray Version.

I am looking forward to your next release v4.0. And i would be much grateful if you focus mainly over two issues.
1. Increased Performace
2. More space for Programs rather than storage. SO that Trinity would run any application smooth.

If the above two are added to your current v3.4; i must say you will beat the Rest.

1. Even more??
2. Believe me, I'd love to do it!! You do know that just the bare naked OS is responsible for using about 20MB of program memory, don't you?:D

When the alarm activates; there is no message popup that has an option to Snooze or Dismiss the Alarm. Anyone knows how to fix this?

I don't know why this is happening to you, because in my device when an alarm goes off, it shows a pop up with the following options in the bottom bar:

"Dismiss" on the left
"Menu" on the right with the sub options to "snooze for 5, 10, 15min"... and "dismiss all".

:( Still same error. 260 connection error. My phone is fine when i hit reset, it starts back up normally. I can do other roms but have came across one or 2 where i have the same problem and this is one of them. Is it something to do with SPL? (kinda behond my knowledge.) I'm stumped! :confused:

Again my P3600's info:
TRIN100 IPL-0.50
TRN100 SPL-1.07.0000
OS- 5.1.465 BUILD: 15673.3.3.1
RADIO: 1.38.00.11

So, you have not hard SPLed your device yet? I think you should!
I'm using Des crash proof hard SPL. If you had hard SPL, you could try entering bootloader manually, and then running the RUU.
Also remember not to touch your device or the usb cable when flashing, because sometimes a small touch can cause the usb cable to loose connection momentarily, which you won't notice, but it will cause the error.
Hope this helps.

Quick question in terms of this ROM and running a later version of ArcsoftMMS - I noticed in the 3.3 ROM that when I get an mms, it doesn't come up with the contact name, just the international version of the phone number (although when you open it, you do see the contact name in the message details, only it never updates to link that message with the contact in the threaded messages screen)...in Australia mobile numbers are 04xxxx, whereas when I get an mms, I get the international +614xxx.

This isn't the case when I send an mms though, as it obviously pulls the details from the contacts database and tags the mms to that particular contact...

Anyone noticed this in v3.4? Or is there a reg tweak I can do to resolve this? I wasn't sure whether it was something linked to the threaded messages or not, and whether the reg edit to un-thread the messages might fix it.

It isn't a major thing, more of an annoyance, but if it's a simple fix I might as well do it...just thought I'd see if anyone knew.

Thanks

The same thing happens in 3.4. Have you noticed this behavior in any other ROM running a later version of ArcSoftMMS?

Hi
After some testing I can say SMS still hang, as previously described, by every 5th - 10th SMS I send. This is independent of whether I cut off conversation or not.
I'm running black light
Best regards
Lars

I don't usually text that much, so I haven't noticed this problem, however I can make a small conversation to see if it happens to me.

[cyron_at]

..I don't know why, but Akeos rom is really fast!!!
Maybe because of the XIP?

But its buggy!

[nick_d]

The same thing happens in 3.4. Have you noticed this behavior in any other ROM running a later version of ArcSoftMMS?

The last ROM I used before yours was the WM6 ROM I got from the Dopod member's site (RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.3 0.11_108_Ship (WM6 GPS)). I can't recall what version of ArcSoft they were using, but from memory the issue didn't occur then...

[jcostantini]

I can't by any means send a Voicemail as it appears in the options tab when you are creating a new message. I can use SMS and MMS but no luck with VoiceMail. Is there anything you can help me with FInix?
By the way does someone knows any software that can emulate an answering machine? that would be the most usefull app ever, let the soft take the incoming call and record the message to your phone, then I could save lots of money I usually pay my provider for using my voicemail function.
P.S. Finix please, please take windows media player out from your next project, audio manager is much better.
Rgds and thnx for your excelent work.
J.·.

[hajali]

anything new regarding the random access???

[Mattster_spv]

Ok, sorry, I'm being dumb somehow...

I've got the striped screen (IPL - 1.00) on my device, but when I double click on on ROMUpdateUtility.exe, I get the initial open warnings, but nothing else. No "Welcome to Rom Update Utility" screen.... what am I doing wrong?

I'm noticing that active sync is NOT showing a connection with the device.... maybe this is the problem?

Sorry for such a basic issue, but i have flashed in the past with no problems so don't get what I'm doing wrong!!"

Help! Mattser. :-)

UPDATE:

Ignore me! I forgot to move the unzipped files to a new folder. Told you I was being dumb!!!! Flashed and ready to go...... better read all this thread again for tips and addons! I think I remember someone saying i should do a hard reset first!!! :-)

[Mattster_spv]

Loving this ROM so far!!!

One question I can't seem to find an answer to (I've searched this thread)..

How can I get rid of the task manager shortcut on the bottom right of my screen?

Thanks in advance....

Mattster.

UPDATE:

Worked it out. Start/Devices/Menu/No icon in Tray.

[Mattster_spv]

I CAN'T SEEM TO SWITCH OFF THE STARTUP SOUND

I've tried changing the value in Schaps Adbanced Configuration (says 127 is lowest volume possible) - still getting the startup sound. What should I change the value to?

Or is there another way to switch it off?

UPDATE:

Sorted it: Deleted "Startup.wav" in Windows/Startup.

[tnyynt]

Ok, sorry, I'm being dumb somehow...

I've got the striped screen (IPL - 1.00) on my device, but when I double click on on ROMUpdateUtility.exe, I get the initial open warnings, but nothing else. No "Welcome to Rom Update Utility" screen.... what am I doing wrong?

I'm noticing that active sync is NOT showing a connection with the device.... maybe this is the problem?

Sorry for such a basic issue, but i have flashed in the past with no problems so don't get what I'm doing wrong!!"

Help! Mattser. :-)

UPDATE:

Ignore me! I forgot to move the unzipped files to a new folder. Told you I was being dumb!!!! Flashed and ready to go...... better read all this thread again for tips and addons! I think I remember someone saying i should do a hard reset first!!! :-)

Loving this ROM so far!!!

One question I can't seem to find an answer to (I've searched this thread)..

How can I get rid of the task manager shortcut on the bottom right of my screen?

Thanks in advance....

Mattster.

UPDATE:

Worked it out. Start/Devices/Menu/No icon in Tray.

I CAN'T SEEM TO SWITCH OFF THE STARTUP SOUND

I've tried changing the value in Schaps Adbanced Configuration (says 127 is lowest volume possible) - still getting the startup sound. What should I change the value to?

Or is there another way to switch it off?

UPDATE:

Sorted it: Deleted "Startup.wav" in Windows/Startup.

Seems to me you're a bit quick fingered. Try to restrain yourself from posting a little bit and only post when tried everything.
This here is a bit hilarious!

[Mattster_spv]

Hi Tnyynt.

Yeah, I know... I was going to delete them, but then I thought that if I run into problems, other people like me with less experience in this forum are probably going to do so too, however basic the mistake is.

This way, if they do a search for the solution, they'll hopefully find my posts and thus find the solution. I started flashing the new ROM at 10.30pm last night, and by the time I had finished playing around with it and searching for related threads, it was 4am. So, yeah, eventually I found the answers for myself. Enjoyed every second of it though!

Mattster.

[tomme45i]

From time to time I like to try a new rom etc. but I always comming back to your rom FInixNOver:)
Do you have in your plans for example to make new rom with build 19588 as a base?
Regards
tomme45i

[hajali]

From time to time I like to try a new rom etc. but I always comming back to your rom FInixNOver:)
Do you have in your plans for example to make new rom with build 19588 as a base?
Regards
tomme45i

same here ...

always looking forward to flash the next FInixNOver ROM !! ;)

[zh.dayong]

From time to time I like to try a new rom etc. but I always comming back to your rom FInixNOver...
FInixNOver 3.3GRAY Normal, just perfect for me....fast, stable, nice room...
best roooooom

[hajali]

guyz...
I found some work around the random access issue ...

i used diamond random access ... and replaced the bars with green ...

here is a cab

it's not perfect but it works ...

please backup before using it ..

[cyron_at]

Hey,

we will se a new 3.5, 4.0 version of your great roms?

Thanks,

Chris

[Mattster_spv]

TOMTOM
Since flashing this great ROM my Tomtom seems slower picking up a GPS signal... is this possible? My radio version hasn't changed.

I presume the configuration settings stay the same ("Other NMEA GPS RECEIVER / GPS baud rate 57600 / GPS in COM9")

[filjoa]

Hi

I have one bug... when a lost lan (TMN) I need tourn off phone (commaneger) and tourn on for phone work :S

EM TUGA:

sempre que fico sem rede com esta ROM no meu caso TMN nao consigo voltar a apanhar rede... so mesmo indo ao com manager desligar a opçao phone e ligar de novo para ganhar rede... ha maneira de corrigir isto?

abraço

[skyman76gr]

Hi

I have one bug... when a lost lan (TMN) I need tourn off phone (commaneger) and tourn on for phone work :S

EM TUGA:

sempre que fico sem rede com esta ROM no meu caso TMN nao consigo voltar a apanhar rede... so mesmo indo ao com manager desligar a opçao phone e ligar de novo para ganhar rede... ha maneira de corrigir isto?

abraço
Hi I installed green 3.4 normal before 1 week. Everything works quick and perfect. Congratulations, very good work.

[Mattster_spv]

I'm going to flash the FInix's 3.4 lite ROM... see what it's like.

Anyone know where I can get an Office cab (with word and Excel?) like the one included on the full version?

Thanks in advance,

Mattster.

[tnyynt]

I'm going to flash the FInix's 3.4 lite ROM... see what it's like.

Anyone know where I can get an Office cab (with word and Excel?) like the one included on the full version?

Thanks in advance,

Mattster.

Again, people forgetting about the search feature!

http://www.google.com/custom?hl=en&client=google-coop&cof=AH%3Aleft%3BCX%3AXda-developers%2520search%2520engine%3BL%3Ahttp%3A%2F% 2Fwww.google.com%2Fcoop%2Fintl%2Fen%2Fimages%2Fcus tom_search_sm.gif%3BLH%3A65%3BLP%3A1%3BVLC%3A%2355 1a8b%3BGFNT%3A%23666666%3BDIV%3A%23cccccc%3B&adkw=AELymgWhXIQiIVgqTC4DRADhxKAezCO4e9e6xpgl-IFWEprAaRyQ-K3vLIf9EOLHogblWTSu_74YtUiPy2yjVvW8KpsRPYmqRYnbN0a GFHHUIvTpb2MHg4PJGD7Tik16gayzYj4JDrGECqWJkv78w9J7N LV7u5dfkbMzsd07qki1ZtWZez8KerB-45tE_0Dc2ZRQZYRmHaIWSJFUf6Q8hfqHt9dq0mVoxeNZzH8FXP UYrtI1mvrDV5A&q=office+mobile+2007+cab&cx=000825531964825142534%3Acqr2sjirilw

[Mattster_spv]

Hi Tnytnt.

I have been searching, honest! I've been through that page quite a few times, but being relatively new to this, I got worried as I noticed that the cabs there are said to only be for WM6:

"MS Office 2007 CAB - only for WM6 - xda-developers6 Jul 2007 ... MS Office 2007 CAB - only for WM6 Development and Hacking. .. "

I also noticed a thread there from someone, like me, searching for something 6.1 compatible:

"new Microsoft Office Mobile 6.1 cab [Archive] - xda-developers12 Jan 2007 ... just_jeepin. 29-11-2007, 08:36 PM. Does anyone have a cab file for the official Microsoft Office Mobile 6.1 that was released today? ..."

I did notice one source but it says its for Smartphone:

"Office Mobile 6.1 for SMARTPHONE [Archive] - xda-developersOffice Mobile 6.1 for Office 2007 file compatibility... If you would like .cab files, you can extract the .msi files and pull the .cab's out by using this ..."

So anyway, what I'm really asking is... can someone give me a safe working link for an office application that will work with this ROM. The last thing I want to do is download something that won't work.....

[tnyynt]

Hi Tnytnt.

I have been searching, honest! I've been through that page quite a few times, but being relatively new to this, I got worried as I noticed that the cabs there are said to only be for WM6:

"MS Office 2007 CAB - only for WM6 - xda-developers6 Jul 2007 ... MS Office 2007 CAB - only for WM6 Development and Hacking. .. "

I also noticed a thread there from someone, like me, searching for something 6.1 compatible:

"new Microsoft Office Mobile 6.1 cab [Archive] - xda-developers12 Jan 2007 ... just_jeepin. 29-11-2007, 08:36 PM. Does anyone have a cab file for the official Microsoft Office Mobile 6.1 that was released today? ..."

I did notice one source but it says its for Smartphone:

"Office Mobile 6.1 for SMARTPHONE [Archive] - xda-developersOffice Mobile 6.1 for Office 2007 file compatibility... If you would like .cab files, you can extract the .msi files and pull the .cab's out by using this ..."

So anyway, what I'm really asking is... can someone give me a safe working link for an office application that will work with this ROM. The last thing I want to do is download something that won't work.....

Try searching, my friend FInixNOver made a cab and also separate cabs for each app (Word, Excel, Powerpoint)

[atropo]

http://forum.xda-developers.com/showpost.php?p=1635570&postcount=248

So, we can save passing band.
Bye.

[Mattster_spv]

http://forum.xda-developers.com/showpost.php?p=1635570&postcount=248

So, we can save passing band.
Bye.

Hi Atropo.

I found this link eventually. I included FInixNover's name in the search I did for Office cab and bingo! Thanks for posting it though. Exactly what I was after. :)

[Sunra]

Frequently when I make a call or get called the call volume is not at max level. I turn it up using the rotating thingy and all is well. But next call it starts out the same. Is there a way to keep max volume at all times?

[jackass]

Frequently when I make a call or get called the call volume is not at max level. I turn it up using the rotating thingy and all is well. But next call it starts out the same. Is there a way to keep max volume at all times?
I too have this strange little foible.

[edkmho]

Frequently when I make a call or get called the call volume is not at max level. I turn it up using the rotating thingy and all is well. But next call it starts out the same. Is there a way to keep max volume at all times?

I have encountered the volume problem too. I can confirmed that the volume will not be max out even if i have set it to maximum.

[desolateone]

FInixNOver 3.4/3.4Light
Copy the cab to your device, install and run it. That’s it!!

Pls excuse my ignorance, but it is not a .CAB, has 4 .EXE files and being a total newb I am unsure what to do....

Any assistance appreciated.

[tnyynt]

Pls excuse my ignorance, but it is not a .CAB, has 4 .EXE files and being a total newb I am unsure what to do....

Any assistance appreciated.

You should have downloaded a file called "rom_licenser.cab" from any of the 4 mirrors. Place that file anywhere on your device and install it from within your device to location Device. It's as simple as that!

[FInixNOver]

Pls excuse my ignorance, but it is not a .CAB, has 4 .EXE files and being a total newb I am unsure what to do....

Any assistance appreciated.

"What we've got here is, failure to comunicate... So, we get what we had here last week, which is the he wants it. well, he gets it. And I don't like it any more than you man..."

I bet you have associated cab files with winzip or winrar. So you've made the most commom error ever. You've extracted the cab, and now you're wondering what to do with the files you got from that process. This is basic knowledge of windows. Don't ever extract a cab, just copy it to your device and run it there!

[desolateone]

"What we've got here is, failure to comunicate... So, we get what we had here last week, which is the he wants it. well, he gets it. And I don't like it any more than you man..."

I bet you have associated cab files with winzip or winrar. So you've made the most commom error ever. You've extracted the cab, and now you're wondering what to do with the files you got from that process. This is basic knowledge of windows. Don't ever extract a cab, just copy it to your device and run it there!

My bad, I should have been far more specific, it was not the rom_licencer.cab [plus it does not have 4 .EXE files container :D ], it was the issue with the "FInixNOver3.4_GrayNormal.rar", which I have since learned, via trial and error, to workout how to use.

Now if I could get around the communication errors [260] on both Vista64 Ultimate and XP Pro; both of which are fully up to date.....

I notice that the program [ROMUpdateUtility.exe] removes/disconnect the sync.

My current image version is the original 3.00.707.18.

[voxhel]

Hello FinixNOver!

I don´t know if you could remember some posts on other version 3.2 and 3.3 about the Bug of Bluetooth HandsFree disconecting after 30s with the car.

I went with Akeos firm just because it didn´t had that BUG.

I have Upload your 3.4BlackNormal and the Bug is still there.

After paring with the car for 30s it disconects the Bluetooth on the P3600. To make it run again only manual in the "Commanager" and activating the Bluetooth again.

Has i said in the past, if you need a "betatester" :) you can count with me! ;) to help me and you with this prob.

Um abraço
Vox

[Mattster_spv]

Have had ROM 3.4 Light (Green) running for a week or so now - absolutely great. All Spb products installed (on sd when possible), no problems, great speed, great look. Thanks as always to FInixNOver.

Mattster.

[lula6894]

UP until FInixNOver will cook a new version

[Sunra]

I downloaded some wm6 themes and was wondering about the most efficient way to change the custom parts of this rom (like the dialer). Can anyone shed some light on this?

[tnyynt]

I downloaded some wm6 themes and was wondering about the most efficient way to change the custom parts of this rom (like the dialer). Can anyone shed some light on this?

It's not rocket science, you just have to edit the files or design new ones and replace them on the device.

[Sunra]

It certainly isn't rocket science. But will you design your rocket with just a pen and a notepad or will you also be using a calculator?

I don't think FInixNOver uses mspaint to change all the files for his themes. I have searched the web for a nice freeware batch-color-converter but couldn't find one that makes the job easy.

I'll rephrase my question. Could anyone tell me what software they use to modify the color of the themes?

[vali_p33]

Great rom. Everything you want: speed, stable, great look, no problems. Thanks.
Something new (version)? :)

[rl66]

It certainly isn't rocket science. But will you design your rocket with just a pen and a notepad or will you also be using a calculator?

I don't think FInixNOver uses mspaint to change all the files for his themes. I have searched the web for a nice freeware batch-color-converter but couldn't find one that makes the job easy.

I'll rephrase my question. Could anyone tell me what software they use to modify the color of the themes?

:D long time ago (WM5 lol) i have seen a freeware very easy to use, a bit like the one in standard in windows XP it create a theme file with color sheme... the bad news is that i don't remember the name. but i remember it was a nice soft.

Google is your friend, now that you know it exist you can search lol

[atropo]

Maybe this one :ThemeGenCE

Bye

[tnyynt]

:D long time ago (WM5 lol) i have seen a freeware very easy to use, a bit like the one in standard in windows XP it create a theme file with color sheme... the bad news is that i don't remember the name. but i remember it was a nice soft.

Google is your friend, now that you know it exist you can search lol


Maybe this one :ThemeGenCE

Bye

I think he is not referring to the Today Themes but the general aspect of the ROM (DialPad, CommManager, Windows Media Player, etc.).
Files are editable in any image editor (such as Photoshop, Paint Shop Pro, etc.)

[LoopyLoo]

Hi FInixNOver,

First off, let me start by saying that I've been trying to upgrade my SPV700 to WM6.1 and your 3.4 ROM is definately the best I've found so far. And I've tried quite a few of them I can tell you! :)

The Lite version is very fast, and seems stable, so I've plumped for that in the Grey and managed to set my device up pretty much as I wanted it... For the first time in ages! :)

Now then, for some possible "bugs"... I've found only 2 thus far.

(1) By default, it seems that WM5torage1.8 does not work properly. Upon connection to the PC, although a USB device is detected it is not enumerated properly by WXP thus no proper data connection is established. But I found that if I deselect "Enable Advanced Network Functionality" in the USB-PC Connections Settings then the problem seems to go away.

(2) Whenever I make or recieve a call (fab dialer, by the way; simple GUI with nice BIG soft buttons!) the speakerphone volume is always on the low side. If I adjust it either up or down via the slider control it immediately recovers to a more acceptable level.

On a general note, I believe that your ROM, like every other WM6/6.1 I've tried, does appear to suffer from some degree of long term memory leakage. And no amount of shutting down programs or using Hibernate etc ever quite recovers all the memory. Is there some intrinisic problem with the basic WM6x kernal that you know of?...

Very well done with your efforts anyway. You have at least one happy customer! :)

Cheers,

LL

[tnyynt]

(1) By default, it seems that WM5torage1.8 does not work properly. Upon connection to the PC, although a USB device is detected it is not enumerated properly by WXP thus no proper data connection is established. But I found that if I deselect "Enable Advanced Network Functionality" in the USB-PC Connections Settings then the problem seems to go away.
You need to set up WM5torage, to be more exact, in troubleshooting you have to Disable concurrency and RNDIS on activate.

[LoopyLoo]

Hi tnyynt,

Thanx for your feedback.

I have already tried changing those settings, which by default are both unticked (i.e. not Disable Concurrency and not Disable RNDIS) but the ticks dont appear and the problem remains?...

FInixNOver - I also wanted to mention about the newer style (WM6.1?) text previewing panel. Its good to see the ongoing converstation thread whilst composing a text/reply, but is there anyway to turn this mode off? Or at least increase the size of the typing pane - two visible lines is all I get and it would be good if I could have more?

Cheers,

LL

[tnyynt]

Hi tnyynt,

Thanx for your feedback.

I have already tried changing those settings, which by default are both unticked (i.e. not Disable Concurrency and not Disable RNDIS) but the ticks dont appear and the problem remains?...

FInixNOver - I also wanted to mention about the newer style (WM6.1?) text previewing panel. Its good to see the ongoing converstation thread whilst composing a text/reply, but is there anyway to turn this mode off? Or at least increase the size of the typing pane - two visible lines is all I get and it would be good if I could have more?

Cheers,

LL
I'll answer both questions as my friend FInixNOver is a bit busy these days:
1. The correct procedure is: start WM5torage, tick Lock card on attach only, activate, connect device, Troubleshooting, tick both (it will not show as ticked, but it will tick them), disconnect device, deactivate, activate, connect device.
2. It's called threaded sms. To play with the settings, edit the registry at:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\
SMSAvailable=
dword:0=classic style
dword:1=threaded style

[LoopyLoo]

Hi tnyynt,

That's fairly a convoluted procedure for the WM5torage... But I followed it and it works! :)

As does the Reg edit for the Threaded SMS (I learned something new there!). No way to have an adjustable panel then - say by dragging the margin line with the stylus?...

[videx]

Link for download the ROM Licenser tool, don't work. Any mirror? Thanks

[tnyynt]

Link for download the ROM Licenser tool, don't work. Any mirror? Thanks

You have it at post #114.
Also fixed the link at post #1 so you can download it directly from there!

[LoopyLoo]

For any of you who, like me, have tried to disable Threaded SMS only to find the notifications stop working too, then take a look at this thread.

http://forum.xda-developers.com/showthread.php?t=368046

I tried it out and it worked for me. OK, so you may have to actually add in the appropriate key for this particular fix, but hey...

Cheers,

[voxhel]

Hello FinixNOver!

I don´t know if you could remember some posts on other version 3.2 and 3.3 about the Bug of Bluetooth HandsFree disconecting after 30s with the car.

I went with Akeos firm just because it didn´t had that BUG.

I have Upload your 3.4BlackNormal and the Bug is still there.

After paring with the car for 30s it disconects the Bluetooth on the P3600. To make it run again only manual in the "Commanager" and activating the Bluetooth again.

Has i said in the past, if you need a "betatester" :) you can count with me! ;) to help me and you with this prob.

Um abraço
Vox

Hello Finix!

I´m still testing to try to find the prob.

One thing i have noticed wend i arrive to the car is if i put the p3600 on a more hidden place than usual it doesn´t start paring with sucess. but with other ROMs (Akeo) even in a far more hidden place it would pair with success, trunk of the car!

Can it be a lower value of "Power in the Bluethoot" that´s causing this probs of paring unparing? Probably to make the rom consume less batery, but it gives this resoult with the HandsFree?

Regards
vox

[Mattster_spv]

For any of you who, like me, have tried to disable Threaded SMS only to find the notifications stop working too, then take a look at this thread.

http://forum.xda-developers.com/showthread.php?t=368046

I tried it out and it worked for me. OK, so you may have to actually add in the appropriate key for this particular fix, but hey...

Cheers,

Member "Ervius" has already made an application to sort this out. No need for registry modifications. Just download the cab, copy it to your storage card, click on it, then go find it in your program list. It gives you the option to turn on threads (chat enabled) or off, and whether you want sms notifications too. Well worth having:

http://forum.xda-developers.com/showthread.php?t=385127

[LoopyLoo]

This forum has such a wealth of information on it!...

If ya can just track it down!!! :-)


Thanx for the info, dude.

[queer~dude]

i've been looking all around for "FInixNOver Title Bar Analog Clock Tweak"....unforturnately the link privoded says the file has gone...is there anyone can upload this little useful application
thanks a lot

[FInixNOver]

i've been looking all around for "FInixNOver Title Bar Analog Clock Tweak"....unforturnately the link privoded says the file has gone...is there anyone can upload this little useful application
thanks a lot

Answered here (http://forum.xda-developers.com/showpost.php?p=2494649&postcount=92).

[albkirk]

Hello,

I'm testing/using this ROM for a couple days... so far so good! ;)
I use it mainly as MP3 player and as GPS on the car.

Some comments:
1- My iDream A2DP Headphones-Clip works OK with this ROM!!!!
Just need to start the clip on discovering mode and tap "Quick link to:
BTHS01" on today's screen.
2- Works OK with TT 7.4 (just need to select "other NMEA device")
3- It has no issue with my favorite app: Mortplayer! :cool:


My sugestion to improve your ROM:
1- Somehow, you should increase the contrast between the background and the items. Sometimes it's too hard to see something, specially, on sunny days.
2- add the "Equalizer" app.


Thank's for sharing it! :D

[Water2]

Hello,

I would like to remove the battery status at next to the Start menu.
You can see the battery status when close all programs.
When I close all programs and I see the Today, I would like to see the digital clock.

How can I replace the battery status to clock?

Other:
Anyone can share with me the original green and blue Windows Mobile 6.1 themes?

Best regards,
Szabolcs