How to flash Hard-SPL onto HERMES

[i cant tell you]

Can anyone please post a guide on how to flash Hard-SPL onto my HTC TYTN.

The guide for installing Hard-SPL onto the HERMES is not available anymore, and i am EXTREMELY confused about what im doing, and i am afraid i will brick my phone if i do something wrong.

Please please please help!

[Arga]

Read the sticky, first post on this page.

It really isn't hard to do. But be sure you know what you are doing btw. SO read the sticky!

Basically you just download the flavor of Hard SPL you want (I used 2.10 which I can recommend, very easy to downgrade to factory SPL again as I just learned!).

After download unzip the folder and run the RUUWrapper. Follow instructions exactly, do nout unplug your device etc. and it should work like a charm. It takes about 1 minute!

If you don't know what you are doing or you are still doubting, wait for Mr Vanx site to come online again or don't flash. There is always a risk you screw up and end with a $500 brick.

So use at your own risk!

[ialwaywanted]

Download hard spl v7 from

http://forum.xda-developers.com/showthread.php?t=296722

[i cant tell you]

thanks guys i did it :D

[puca]

hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca

[mrvanx]

hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca

start the device in bootloader, what is displayed?

[Rockford_622]

Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.

[mrvanx]

Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.

the SPL flash is VERY quick.

I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.

[puca]

hi mrvanx
thanks for your reply after checking the bootloader it has changed to 2.10 olie it did it so fast i thought it had failed will check properly next time and have successfully flashed it to crc 9 and it runs great thanks for all the help

[Rockford_622]

the SPL flash is VERY quick.

I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.

I appreciate your reply Mr. Vanx. Same as with puca, I put my phone into the bootloader mode and it does indeed show the correct 2.10 Olipro version. This is the 3rd 8525 I have had and I could have SWORN it took much longer on the first 2. Even the update from WM5 to WM6 seemed to take much less time with this particular phone. Guess I shouldn't really complain :)

[nbhor]

Hi Mr Vanx I have followed your guide to downgrade my current SSPL (2.10 Olipro) to SSPL (1.11). But I keep getting error 260. I have followed guide step by step.
I have even tried flashing from SD-Card (by renaming to HERMING.nbh). Process runs successfully, but nothing happens.
Its still showing SSPL-2.10 Olipro in bootloader. Am I missing anything?

Thanks

[hinaughty]

can some one point me to the guide. I am facing a NO GSM problem on vodafone VPA 1605 with following config:

ROM Version: 1.20.161.6
Radio: 1.03.06.00
CID: VODAP001
Bootloader: 1.04

I do not see the radio version or the IMEI. So I would like to do a HARDSPLv7 followed by Radio ROM update to 1.06.00.10. I hope this will work. Seniors may help with their sggestion.

Can someone help me with the guide to HARDSPL as I am doing it for the first time and the guides are not available at MR Vanx site nor can I locate the sticky?

regards,
H

[]^[YuMmY]^[]

have you read the first page?

[folusmile]

am using hermes 300 and i want to uprade from 1.40 t o 2.40 but i cant do it.i ve tried can anyone help

dania

[majida]

hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks

[Hakim Rahman]

hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks


you should try the hard reset iMate 9502 posts by martin_yo in http://forum.xda-developers.com/showthread.php?t=407336&page=2
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!

But Don't worry Guys...it can be solved with manually hard Reset...

1. Remove battery and reinsert (to make sure the phone is off).

2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.

3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.

Work for me... but !!

[majida]

With many thanks Hakim
But I know hard reset of my phone, I did it many time before, unfortunately it dosen't work this time. I tried all I knew about hard reset. but I couldn't do anything for my phone.
I tried (FN+Green+power like last time I did hard reset easy)(FN+Green+reset button)It don't sho any reaction.
Please help me.