View Full Version : HELP NEEDED - Problem: Mini-USB Port Fried???
Blob8me
6th June 2008, 10:09 AM
Hi. Hoping someone can help me out here - I seem to have "Fried" my mini-usb port on my Touch Dual? :(
I had connected my Dual to my Vista PC in order to flash the latest Mary Rom - it started to charge the battery but hadn't picked up the device in Windows Mobile Device Manager (as happens some times?) - when I started the CustomRUU I of course got a connection error and this is when the port seems to have "died"???
The Dual now no longer charges - either from the main power supply or from PC or Laptop and I get the error message "USB Device has exceeded the power limits of its USB port" when I plug it into an XP Laptop?
I'm hoping that this is not a permanent "hardware" issue and that someone has had the same problem before and has a solution?
I have tried: Soft Reset, Hard Reset, Removing the battery, Changing the battery, changing the software settings for the usb port?
Help.....?????
Blob8me
7th September 2008, 11:17 AM
So its been a few months now since my Dual died - I've just found it in the bottom of a drawer in my office and its reminded me to take a look and see if anyone else has had this problem so I thought I'd refresh the thread....
Any (ANY) advice would be great - I cant return it to HTC as its stuck with a custom ROM loaded and I cant connect the USB (obviously) to change it back to a shipped rom......
Is there any way to flash an original rom from a memory card? :confused:
Help......?????
.
the_fish
7th September 2008, 08:27 PM
that sounds bad...but i don't have the solution... sorry...
ducamie
7th September 2008, 08:29 PM
http://forum.xda-developers.com/showthread.php?t=422370
Valvarin
7th September 2008, 09:49 PM
but your battery should be very discharged now right?^^
ducamie
7th September 2008, 11:05 PM
i think my mini usb is on its way out
it keeps loosing activesync connection and i have to wiggle the lead etc.. does anyone else have this problem?
mjbozzy
4th December 2008, 02:33 PM
I am new here, but i am an electronics technician who has had a similar problem with my NEON 200. Seems that PC USB Ports can only supply 5VDC @ 500mA max and the NEON power pack is 5VDC @ 1A. I continually charged off my PC and Laptop when i could not find my mains pack - i think this eventually killed my phone or battery as now it just does not charge and i cannot turn on the radios. I did however measure the volts on the battery to be correct, and i did briefly get the device operational again (without the battery warning then turning itself off) for long enough to get a new ROM on the phone hoping this would fix it. FAIL! I have the same problem again... I hear there is a fuse on these that could be open cct, so i am going to look into that now. Hope some of this helps.
BTW - i hard reset the thing about 50 times (hoping the vibrate on start up would run the battery out) and this is how i got the thing working again the first time (before the ROM update).
Cheers,
Matt.
NetrunnerAT
4th December 2008, 04:02 PM
i need more infos ... what have you done befor you get this error?
flash new radio? or OS? or what ever?
twolf
12th February 2009, 10:18 PM
This just happened to me too...
:(
vcdwelt
13th February 2009, 11:02 AM
You can try to solder the contacts from the usb Plug in Phone. Have done this on a friends nike and this solved the problem.
Be carefull and don't overheat the board...
twolf
13th February 2009, 11:10 AM
So you think its just a loose usb port?
I dont know, the pc usb host was shutting down everything on connect...
But Ill try... :(
ducamie
13th February 2009, 08:44 PM
that sucks twolf
i wish you good luck
twolf
15th February 2009, 11:41 AM
Ok, went into a indian repair shop here and its fixed...35€ :(
I was worried there for a while, the guy couldnt fully talk any language I tried.
But is working fine. :)
vcdwelt
15th February 2009, 06:30 PM
Have you seen what he did with your nike? Or had he told you what he have done?
twolf
15th February 2009, 08:45 PM
As far as I know he just replaced the usb port, but I barely understood what he said.
It must have been that because he only had 3 hours with the device and there where other devices in line to be repaired as well.
ducamie
15th February 2009, 09:14 PM
im glad you got it fixed
did he replace it with an ExtUSB port? will headphones still work?
twolf
15th February 2009, 09:24 PM
Hmm... its a normal port, looks like the old one.
I never used the headphones, dont even know where they are, I have a Motorola S9...:D
http://www.phonearea.net/wp-content/themes/default/pictures/motorola/2007/motorola_s9.jpg
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.