View Full Version : Athena Unlocker
ady_uaic
8th June 2008, 02:20 PM
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
lakeman
8th June 2008, 03:20 PM
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
Hi ady
before we go further I need to know 2 things.
Do you have a HTC athena or variant.
Did you use the wrapper and follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=316846
ady_uaic
8th June 2008, 08:46 PM
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
sergiopi
8th June 2008, 09:24 PM
You have to explain WHAT HTC wm6 ROM you want to install First :)
If you have and old WM5 x7500 just register on www.htc.com and download the HTC OFFICIAL WM6 update for YOUR language!!
ONLY
If your X7500 is SIM LOCKED you need to UNLOCK it first(wrapper isn't for SIM Unlock) and ATHENA UNLOCKER meets your needs
ady_uaic
8th June 2008, 10:42 PM
i wanna install this rom: AP Dual 3.0.
lakeman
9th June 2008, 07:59 AM
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
If you want the AP3 0r other roms in the sticky made for SPL 1.2 http://forum.xda-developers.com/showthread.php?t=397518
then you should run the athena wrapper that Olipro has made to be as much foolproof as possible
As he says "your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS."
It seems that you must use the same USB port as well.
ady_uaic
9th June 2008, 09:09 AM
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
sergiopi
9th June 2008, 09:48 AM
ATHENA UNLOCKER is needed ONLY if you have to unlock the SIM too.
E.G. If your phone, WITH ORIGINAL ROM, can use ANY SIM, you don't need to run ATHENA UNLOCKER
As CMONEX said here
http://forum.xda-developers.com/showpost.php?p=2030747&postcount=81
wrapper is hardspl + customruu
unlocker is hardspl + sim unlocker
SPL means a part of "bios" used ALSO for defining your device language and vendor (HTC, T-Mobile, DOPOD,...) and avodi flashing a "non original" ROM
To flash ANY rom you need to overcome those informations. You can do this running an application, but if something goes wrong during the FLASH and your device doesn't start anymore... you are lost. You can't run the application again, because you haven't the OS!
HARD SPL has been developed to avoid this problem. It is a NEW SPL (1.2 or 3.x) developed from OLIPRO (and CMONEX too for 3.xx) flashed into your device. it is IN the "BIOS" so, even if your OS doesn't start, you can flash ANY ROM
Both, WRAPPER and UNLOCKER will flash HARDSPL. You need only the WRAPPER if your phone can use any SIM!
When you choose the ROM some are build for the SPL 3.x and other using the 1.2 SPL.
With WRAPPER or UNLOCKER you have the 1.2 SPL release, if you want to test a 3.x ROM you need to flash the AP4 rom.
The only differences between SPL 1.2 and 3.x are the "partitioning" of the device. AP4 needs more space for the system files, then the 3.x SPL was developed to increase the System Partition. SPL 3.x flashing IS ONE WAY ONLY, (since Cmonex relase the tool to go back): if you flash AP4 you CAN'T flash any origninal HTC ROM
lakeman
9th June 2008, 02:23 PM
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
Listen to what Sergiopi said.
You will always get an error running these programs unless you have an activesync connection to the ppc when you run the program.
The way you were talking I thought you had already tried to run it on your PPC
ady_uaic
10th June 2008, 04:17 PM
sergiopi thank you soo much. you are so kind. thank you.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.