Stuck on BL screen, nothing seems to work!

[Alvaster]

When I turn on my phone using JUST the power button, it vibrates, and that's it. The screen doesn't turn, nor do any lights.

When I turn on the phone using the BL Screen (rainbow, POWER+Comm+Camera), it shows me:

TITA100 MFG
SPL-2.40 Olipro
CLPD-9

Then, when I plug it to my computer, it reads the device, and tells me its "WM 6.1.6965".

I want to be able to turn on my phone and let the OS boot normally, but nothing seems to work! I've tried flashing different ROMs and Radios, but they all seems to have either an "Image Error" or "They cannot find a device" on my computer.

I want to be able to use my phone, but I have no idea where to start. How did it get to this state?
I'm not sure.

PLEASE HELP ME. Much appreciated.

[gator2k83]

have you tried the sd card method. Where you rename the rom in the update called RUU_signed.nbh to TITAIMG.nbh and place it on the root of the sd card ( a fat 32 formatted non sdhc card) any small one will do as long as its big enough to hold the rom normally about 70-100mb so a 128mb or bigger card should work but nothing over 2gb card wise. All you do is put the file that you renamed onto the micro sd card then go into the boot loader screen of your phone via power+camera+reset it will briefly say serial then go to a screen prompting you to update follow what buttons to push to do the update via the on screen prompts, once done it will say update complete. It has been my best experience to take the battery out for 20-30sec when this screen comes up then replace the battery and boot via the power button. Hope this helps.

Oh I could have flamed you for not searching and provided you a link to one of the many forums on here already about the titan (ppc6800) but sometimes its just as easy to take 2 min to post what works as it is to digg up the proper forum via search results.

[Alvaster]

Thanks for the info.

However, I have searched the forums, and everyone seems to have a happy go lucky time when it comes to flashing, which would mean...that I'M not.

Nevertheless, I have tried the SD Card method, with the proper card (1 gig, FAT32, 1024), and when I put it in the Phone, it says "Loading...", then "NO IMAGE FILE!"

I don't know what's up with that. I've tried different custom and official ROMs, and each time I get that message.

[coffey_joshua]

put the USB earphone/ USB power plug into the phone and push the reset button

[gator2k83]

not to make you sound dumb but make sure that you put the RUU_signed.nbh file on there from the downloaded rom or official rom via looking @ the exe with winrar or similar software ... then rename it to TITAIMG.nbh and place on the card... i had similar problems but got past them via doing a full format of the sd card with these selected options 4kb sectors and fat 32 for the format and un-checking quick format once formatted that way the boot loader saw the image and i was able to flash.

[Alvaster]

I reformatted using the suggested parameters, and even so, it said "No Image File!"

I did rename the RUU.nbh file to TITAIMG.nbh, and even then.

That's why this is so frustrating for me. It makes no sense that this doesn't work.

Thanks.

[gator2k83]

i guess you need to search the forums for the program that un-bricks your phone seems that something is wrong and part of the phone is not working, however sense the computer sees the device you should be able to run one of the programs to bring it back.

on a side not try if you have one available another sd card some don't like to work with the boot loader but will still work fine with the phone as an sd card.

[Big Dawg 23]

The file is on the card base directory and not in a folder right? If you place it in a folder it will not see it. I had to do the SD flash on my XV6800 because I screwed it up by not loading the Radio first.