GENERAL DISCUSSION-- (a.k.a: Questions & Answers)

[bbobeckyj]

ANYONE!!!!!!!!!!!!!!!!!!!

how do you merge/delete duplicate contacts in wm6???

i have 3 of each! stupid activesync!

I don't have an answer to your question, but I do have some advice.
Use dotfred's ppcPimBackup, you'll never need AS again. It allows you to hard reset without having to use your PC to restore info.

[rusvdw]

Is there a specific reason why I can't create a new thread in Q&A?

[andbb]

I have upgraded from Nokia e61i and Palm m515 to HTC Touch Pro, and in many ways it is a great experience. However, I really miss that the OS takes over all of the screen when a Notification comes up, as it is too easy to miss a notification.
Do you know of any tools to overcome this - an "Always on top" feature of the notification window for instance?
Regards, Anders

[F_R_I_T_Z]

Its possible anyone explain me the difference between the "MHUB" AND "MHUBVO"?
I know have cross compiled packages specific for each one. but my question is. What exact they do different?

Why in a example, using htc universal programs that are using "mhubvo" are slow than "mhub"?
Or why when using mhubVO same using the direcshow from specific build, can not play some videos files?

Thanks..

[jakub_w]

I don't have an answer to your question, but I do have some advice.
Use dotfred's ppcPimBackup, you'll never need AS again. It allows you to hard reset without having to use your PC to restore info.

thats what i used, and thats why i got the stupid duplicates lol

i forgot to uncheck contacts in activesync after i connected again.

[GSLEON3]

thats what i used, and thats why i got the stupid duplicates lol

i forgot to uncheck contacts in activesync after i connected again.


Whenever you sync contacts via a/s partnership, you will have duplicates if restore via any means other than a/s.

The easisiest way is to download the duplicate contact fixer for outlook then resync your contacts to your device. Contacs removed from outlook will also be removed from your device.

[GSLEON3]

Its possible anyone explain me the difference between the "MHUB" AND "MHUBVO"?
I know have cross compiled packages specific for each one. but my question is. What exact they do different?

Why in a example, using htc universal programs that are using "mhubvo" are slow than "mhub"?
Or why when using mhubVO same using the direcshow from specific build, can not play some videos files?

Thanks..

mHubVO is the updated version from the Opal Device & has a video fix for MP4 video. This version also is primarily only for installation on HTC devices & does not work with most other device manufacturers.

MhubVO also requires the Opal Camera to be used for some features to work & also requires some of the newer resource files or dll's.

[GSLEON3]

Is there a specific reason why I can't create a new thread in Q&A?

Because you did not read the rules which reveal how that is made possible. :D

[GSLEON3]

I am sorry to post here I know it don´t belong here. But I want to open a thread in question and answers and I get this notice

flaxjef, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

Am I the only one with this problem, please help me.

BTW I like the idea of a section called questions and answers :)

Read the rules first. Then you will know the answer. I can answer any question except this one as it really is important that you read the start here thread first. There are two short posts in the place you need to start. One is from TweakMan, one is from me.

Thanks!

[masa1977]

dear friend hi
i have question
how can delete files from the main windowe folder for example when you want to delet a them from a cook rom the delete option was not availeble and also in today plugin when you delet the them this message apear "this is the system file and can not be deleted" i like to know how can delete this kind of useles files from windows folder
i know i am begener but please help me
with special thanks

[bbobeckyj]

dear friend hi
i have question
how can delete files from the main windowe folder for example when you want to delet a them from a cook rom the delete option was not availeble and also in today plugin when you delet the them this message apear "this is the system file and can not be deleted" i like to know how can delete this kind of useles files from windows folder
i know i am begener but please help me
with special thanks

You can't do it.
Those files are part of the rom, even if you delete some of them it will not free up space because you can't change the rom on your phone, you'll have to cook a rom with less in it first.

[parthabhatta]

In symbian phone there is no default t9 contact search from standby screen. But there is a free beta app called t9nav (www.t9nav.com). It scans the entire phone / memcard and searches out any contacts, apps, games, media files, email id, message, url, bookmarks, keywords etc once the user searches the same from standby screen using t9 input. Moreover it learns users requirements and maintains a history. The next time a similar search is tapped the last used app is placed on top.

In windows mobile t9 contact search is present by default (advantage over symbian) but there is no way to t9 search other things and I think no such 3rd party software is available. I know there are many shortcut apps like x3bar, elocont shortcuts, oxios shortcuts and many others but I think t9 search would be much more easier to use if something can be developed.

I don't have any idea about programming. This is only a suggestion from my side.
Anybody can throw light on this.
Thamks for patient reading.

[GSLEON3]

You can't do it.
Those files are part of the rom, even if you delete some of them it will not free up space because you can't change the rom on your phone, you'll have to cook a rom with less in it first.

Well, actually you can (depening on device), not natively of course, but HTCRIE makes editing graphics & removing files a snap.

[churka]

Hi
I have a simply request and YES I have searched. I know its out there but I can't find it.
I want a .tsk theme with flat black bars on top and bottom like the diamond.
Thanks

[Keland44]

Is there a program out there that allows you to keep a program active regardless and if the program does get killed for it to start back up with out me having to manually

i'm trying to use im+, callcalendar, and possibly dashwire all at the same time and for some reason they won't stay open all the time i've tried SKTOOLS and added them to the do not kill list but that doesn't seem to be working any other suggestions out there?

[bbobeckyj]

Well, actually you can (depening on device), not natively of course, but HTCRIE makes editing graphics & removing files a snap.

Yeah I Know, But I was trying to keep it (too) simple, and It's too much bother to type long sentences on my ppc.
Anyway AFAIK it still doesn't free up hard disk space so the only benefit I could think of would be to tidy up the appearance, which could be done by hiding the files.

[bbobeckyj]

Hi
I have a simply request and YES I have searched. I know its out there but I can't find it.
I want a .tsk theme with flat black bars on top and bottom like the diamond.
Thanks

UItweaker,
In my signature somewhere

[bbobeckyj]

Is there a program out there that allows you to keep a program active regardless and if the program does get killed for it to start back up with out me having to manually

i'm trying to use im+, callcalendar, and possibly dashwire all at the same time and for some reason they won't stay open all the time i've tried SKTOOLS and added them to the do not kill list but that doesn't seem to be working any other suggestions out there?

Install mortscript, probably the best thing for a ppc, link in my sig.
To start it up if it gets closed, write a script similar to this-

while (1=1)
If wndexists ("callcalendar")
sleep (10000)
else
run "\program files\callcalendar.exe"
endif


Note: the if wndexists line is case sensitive, there is a difference between CallCalendar, Callcalendar & callcalendar

[churka]

I think M2D screwed up my internet..
In internet explorer, I get a error message after trying to go to a website.
For outlook, I want to set up an account but it can't download the e-mails because IE is messed up.
And for Live Search, I can't see the maps, search, or look at any feature available. I get an error message saying "Cannot connect to server. Check your connection and try again blah blah blah"

Can you please help me? I only have Opera Mobile that works!

[ruebyi]

Hi!
I'm messing around a bit with ivans JustMe kitchen. Now I found packagecreator 5.4 from the wiki to create my own OEM folders.
I did this succesfully with homescreen++ and could flash the ROM after that.
But now I tried to add mortplayer... the OEM folder was created, I run the BuildOS to select my packages but now I get an error, that the setup.dll already exists in the dump folder...
can anyone help me? or perhaps give me a OEM folder of the last MortPlayer?

ruebyi

Edit.: When I try to add Mortscript OEM folder I get an error, too... Build os is not able to creat cv (or something like that) what do I have to do with my OEM packages?

[timmymarsh]

Is there a program out there that allows you to keep a program active regardless and if the program does get killed for it to start back up with out me having to manually

i'm trying to use im+, callcalendar, and possibly dashwire all at the same time and for some reason they won't stay open all the time i've tried SKTOOLS and added them to the do not kill list but that doesn't seem to be working any other suggestions out there?

have u tried using quickmenu, i use call callender all the time and ive put that in the exceptions lis, works very well. Call callender is auto strt on boot i belive, but ive put a short cut for it on htc home tab also :D

[timmymarsh]

Hi All,

Thought i'd ask for help instead of just replying:D

I have a casio FX-795P personal computer (showing my age here.....) and of course this machine uses BASIC (those were the days.. haha). I have written a couple of programs that help me in my day job to work out co-ordinates, bearings & distances (im a site engineer). Whilst the casio does a great job of this, i would like a programme on my Touch Cruise to save having to carry two devices round.

Does anyone know of a a free app that does this? Or could someone write one? I can pm anyone with the BASIC programme to help.

Many thanks to XDA!!

[nuffstylez]

Is there a way i can change on of the buttons on the dialer, the ones that says speaker on, mute, talk, note, contacts and end to a turn hands free on button. I would like to change the note button to a turn hands free on button, is there a registry change or something that can do that, thanks???

[Baboon8]

I am a new user to the iphone theme and phone features. It's very nice, but I'm having one issue when I try to redial someone. If I have just finished a conversation with someone and wish to redial them back, the green 'call' does not work when I press it.

Why is this?

Thanks for any help

[tcyeric]

Hi! I'm wondering if there is any way to remove search history from the Search program in Windows Mobile 6.1 (not live search! :)). Tried searching the net for a solution but couldn't find one =(

[speedytr]

I'm currently using w2ktask's battery bar but I want a better solution (maybe a tab in manila like the s2u2 shows). Any ideas???

[MEETyA]

Hey,

my question is how to create themes for SPD Mobile Shell 2.1

How to open these .dat-Files and how to change the included *.bmp-files?

I tried to open these .dat-Files with Winrar and Im able to see whats inside, but I need a password to open/change the included files.

Thanks
Sven

[mrbelvedere]

I have HTC Home installed as a plug-in in my Ultimatelaunch configuration. I upgraded my ROM then reverted to the previous one (twice), ran a restore using SPB Backup (all went well) & rebooted my device (T-Mobile Wing). The problem I'm having is now the Contacts tab is not working! The "add+" icons are dark & when pressed, briefly open default contacts (just a flash) then reverts back to the previous screen (dark contacts tab). I haven't had this problem previously & was wondering what exactly I am missing (other tabs work fine). I have uninstalled & re-installed HTC Home numerous times with no luck. Someone please point me in the right direction, as I use the photo dialer quite frequently! Thanks in advance!

[devish46]

can anyone tell me how to make skins for manilla 2d??or can anyone provide any link??
thanx in advance:)

[Nixeus]

Hi,


How knowing if a device use DiskOnChip flash, or not ?

Great thanks !

[marwspam]

I have installed TomTom navigator on my storage card, then i installed a new image. On my new image, i can run the program from storage card\program files, but it will not show up under start-> programs.

Is there any way to refresh the programs earlier installed on my storage card, so i can hotbutton, etc?

[pjcforpres]

I am looking at getting 1 of 3 phones in a couple weeks, either a Touch Pro, TyTN II, or waiting for an X1... I am currently a BB user, and thus new to the world of cooked ROMs for a phone.

My big question is this, is it possible with a WinMo 6.1 phone to OTA download these cooked ROM's, HardSPL's, etc., with my phone to a SD card and then flash my phone with it?

My at home PC isn't the most stable computer in the world, and tends to go nuts every time I download something... and to make a long story short, I am getting a new one after the 1st of the year when my buddy can build it for me, but in the meantime I would like to get some cooked ROM's working on my phone.

I have a second question, the TyTN II I am looking at is factory unlocked with WinMo 6.1 on it from HTC... It has a TouchFlo settings tab, but all you can adjust is sound, and it doesn't seem to have the same TouchFlo as the Touch Pro I am looking at... is there a difference between the two? The Touch Pro lets you slide your finger up and get a flip through menu, and the TyTN II doesn't... Was the TyTN II I was messing with just messing up, or is it there are two TouchFlo's, and thus a difference between TouchFlo and TouchFlo 3D? And if it is a different version, is it possible to get TouchFlo 3D on the TyTN II?

[sp8805]

Question, heh:

What is a ROM? And can you answer anything else I might possibly ask about it.

In fact just inform me on what I need to know, or point me in that direction. I've had a TyTN II for the longest, and it's pretty stock. A while back, a co-worker let me use his for a while. Let's just say I need a good schooling on some basics for customizing my phone to it's fullest. I recently purchased a Touch HD to have on the side, and decided to do what can be done with it.

So yeah, please help. No need to be gentle, I realize this is like jumping into a crayon box asking: "what's a color?"

THANKS.

[tony1985]

Does anybody know how to change the bars on the top and bottom of the screen to different colors and possibly give them the "3d" effect they have on the xperia silver theme. I want to make them have that 3d glossy effect but be black. I downloaded a simple skin that's supposed to make them black and glossy on any wm6.1 device but instead they went gray just like the xperia silver theme.
any suggestions?

thanks

[Gardenhoser]

I am not quite sure what went wrong with my phone, I currently am running Touch-It on the Wing and all of the sudden today I couldn't get into my text messages and MMS messages... I can do everything else on the phone including browsing the apps and all that Jazz, but I cannot send/receive texts and cannot get into the text or MMS folders to look at the settings.

Thanks for any help,
Adam

[joel2009]

Question, heh:

What is a ROM? And can you answer anything else I might possibly ask about it.

In fact just inform me on what I need to know, or point me in that direction. I've had a TyTN II for the longest, and it's pretty stock. A while back, a co-worker let me use his for a while. Let's just say I need a good schooling on some basics for customizing my phone to it's fullest. I recently purchased a Touch HD to have on the side, and decided to do what can be done with it.

So yeah, please help. No need to be gentle, I realize this is like jumping into a crayon box asking: "what's a color?"

THANKS.
--READ THE WIKI--


all the knowlege you will ever need can be found there :)

[Gardenhoser]

Sorry if I wasted anyones time on this, but I just went through my File Explorer and deleted a bunch of things that I downloaded in the past week because I figured without a hard reset that would be the easiest way to fix this.

Thanks to anyone who spent any time trying to help though,
Adam

[joel2009]

I am looking at getting 1 of 3 phones in a couple weeks, either a Touch Pro, TyTN II, or waiting for an X1... I am currently a BB user, and thus new to the world of cooked ROMs for a phone.

My big question is this, is it possible with a WinMo 6.1 phone to OTA download these cooked ROM's, HardSPL's, etc., with my phone to a SD card and then flash my phone with it?

My at home PC isn't the most stable computer in the world, and tends to go nuts every time I download something... and to make a long story short, I am getting a new one after the 1st of the year when my buddy can build it for me, but in the meantime I would like to get some cooked ROM's working on my phone.

I have a second question, the TyTN II I am looking at is factory unlocked with WinMo 6.1 on it from HTC... It has a TouchFlo settings tab, but all you can adjust is sound, and it doesn't seem to have the same TouchFlo as the Touch Pro I am looking at... is there a difference between the two? The Touch Pro lets you slide your finger up and get a flip through menu, and the TyTN II doesn't... Was the TyTN II I was messing with just messing up, or is it there are two TouchFlo's, and thus a difference between TouchFlo and TouchFlo 3D? And if it is a different version, is it possible to get TouchFlo 3D on the TyTN II?
yes you can flash from an sd card, you will need a blank sd card though (you will need to reformat it to make sure nothing is on it to create problems)

[joel2009]

I have installed TomTom navigator on my storage card, then i installed a new image. On my new image, i can run the program from storage card\program files, but it will not show up under start-> programs.

Is there any way to refresh the programs earlier installed on my storage card, so i can hotbutton, etc?
create a shortcut for it and place it in "\windows\start menu\"

[joel2009]

can anyone tell me how to make skins for manilla 2d??or can anyone provide any link??
thanx in advance:)
the easiest way is with m2dc, do a search for it and find it. skinnig is really just replacing the pictures with new picture (using the same name) and overwriting them m2dc allows you to keep your originals and adjusts the path in the xml (resource file)

[mzshortay]

I just purchased a HTC Fuze, and since I like to customize my phone, and get the most use out of it, I'm thinking of purchasing a new memory card, for the one I had for my Tilt is only 2 GB.

On one site, there is a 4 GB microSDHC (microSD High-Capacity) memory card on sale. I was wondering if anyone knows if this one is compatable with the Fuze, as it is a High Capacity card...and not a regualr SD card. I rather not go through purchasing one, and it doesn't work. Thanks!
:)

[ruebyi]

Hi Guys!

I hope it's just a short Question:
I flashed the JustMe ROM and now my alarms are only ringing one time and then my phone is quite again :( But thats not enough to get me out of my bed!
The Checkbox in the clock\Alarms\sounds\repeat is checked, but this is not helping me! Is there a reg key I have to change? or to add?

ruebyi

[ruebyi]

I just purchased a HTC Fuze, and since I like to customize my phone, and get the most use out of it, I'm thinking of purchasing a new memory card, for the one I had for my Tilt is only 2 GB.

On one site, there is a 4 GB microSDHC (microSD High-Capacity) memory card on sale. I was wondering if anyone knows if this one is compatable with the Fuze, as it is a High Capacity card...and not a regualr SD card. I rather not go through purchasing one, and it doesn't work. Thanks!
:)

Expansion Slot microSD™ memory card (SD 2.0 compatible)

That's from the HTC Hompage, so I would suggest the 4GB SDHC Card should work! Infact i can't imagine that such a new phone is not supporting SDHC...

ruebyi

[zeheres]

Oh nice, that fits. What SD do I need for my Herald? SD or SDHC?

Much appreciated.

[ruebyi]

Oh nice, that fits. What SD do I need for my Herald? SD or SDHC?

Much appreciated.

some guys got a 8GB Micro SDHC Card to work!
Look for SDHC Patch in developer Forum and install this if it's not working without a patch!

ruebyi

[PUNCHYS]

does anyone know if a blackjack 2 from at&t be configured to work on tmobile's 3g?

[zeheres]

Oh, and second issue: Is there some Keyboard Language Fix for Opera or something? Problem is I use an English ROM but I would like to have a German keyboard (hard keyboard@ Herald). Possible?

Cheers

[pjcforpres]

I work as a Wireless Consultant(I sell cell phone and cell phone accessories), and I had a customer come in with an issue, and believe that it might be fixable without sending it in on warranty...

She has a HTC P4300... Wizard platform, WM 5.0, factory unlocked, 100% virigin! It is no longer making a noise when she recieves a new SMS... I figured it was just settings, but her notificatoins sounds were all good. I did a couple searches, and found some possible solutions, but I tried them all(Change the settings, try pressing play in the settings screen, turn off the notification, then back on, soft reset) The only thing I didn't try was a hard reset since she games on her phone she doesn't want to loose, and doesn't have a computer to back them up with(don't ask, didn't make sense to me either).

My question is this, is there a .cab that can restore this part of the program alone? Is there a good manager system out there that would be a round about to this? Has anyone else had this problem?

I found a link for a .cab for a message manager system, but she doesn't seem to interested in this solution, and I am not certain if it will help.

[bbobeckyj]

I work as a Wireless Consultant(I sell cell phone and cell phone accessories), and I had a customer come in with an issue, and believe that it might be fixable without sending it in on warranty...

She has a HTC P4300... Wizard platform, WM 5.0, factory unlocked, 100% virigin! It is no longer making a noise when she recieves a new SMS... I figured it was just settings, but her notificatoins sounds were all good. I did a couple searches, and found some possible solutions, but I tried them all(Change the settings, try pressing play in the settings screen, turn off the notification, then back on, soft reset) The only thing I didn't try was a hard reset since she games on her phone she doesn't want to loose, and doesn't have a computer to back them up with(don't ask, didn't make sense to me either).

My question is this, is there a .cab that can restore this part of the program alone? Is there a good manager system out there that would be a round about to this? Has anyone else had this problem?

I found a link for a .cab for a message manager system, but she doesn't seem to interested in this solution, and I am not certain if it will help.

Turn the volume on!
What is a professional doing coming here for help? With a lady with a ppc only concerned about her game data? :D

Seriously now though-
Does the volume work for everything else?
Check the registry?
What did she install prior to the notification failing?
Try an SPB backup (first 5 uses free) and then hard reset, check notifications, then you can choose what parts to restore from the backup, but you will still have all the data she wants to keep safe.
Also you could probably simply copy all her games' data from the device to a memory card and restore it later.

[MrGansburg]

Morning,

Think I've followed the posting rules - apologies if this is in the wrong section.

This is my first post here and am a complete XDA/WM novice and therefore grateful for any advice and/or pointers.

I’ve recently upgraded my mobile contract and now have unlimited web browsing. I’d really like to take advantage of this and would like a phone with a reasonable size screen for browsing and email that has a full QWERTY keyboard (preferably slide out).

The downside to all this is I have a budget of about £150 for it.

What would be your recommendations?
Is it possible to get an older model phone and upgrade the O/S to the latest version (if required)?

Thanks in advance?

MrG

[pjcforpres]

Turn the volume on!
What is a professional doing coming here for help? With a lady with a ppc only concerned about her game data? :D

Seriously now though-
Does the volume work for everything else?
Check the registry?
What did she install prior to the notification failing?
Try an SPB backup (first 5 uses free) and then hard reset, check notifications, then you can choose what parts to restore from the backup, but you will still have all the data she wants to keep safe.
Also you could probably simply copy all her games' data from the device to a memory card and restore it later.

Thank you! I ran an SPB backup for her, hard reset, and it started working again! As well, nothing else was not working right, and her volume was on...

And as a professional, I don't feel as though it is my job to just sell the phones, I believe I should be able to work them and manipulate them properly. I don't have near the knowledge base I would like for WM devices, so I started searching the web for answers and found this site.

Also, I am planning on getting my first WM device shortly, and am anxious to start enjoying the wonderful world of cooked ROMs, but have no hands on experience, so I'm flying extra blind when such issues arise... There is only so much that can be gained until you start doing it, and until then a lot of stuff is nothing more than a mental image and concept, which means that a lot of this isn't set in my mind as a firm reality and thus easily overlooked... Essentially give me a couple months and I promise to be a productive member of this community.

[timmymarsh]

Morning,

Think I've followed the posting rules - apologies if this is in the wrong section.

This is my first post here and am a complete XDA/WM novice and therefore grateful for any advice and/or pointers.

I’ve recently upgraded my mobile contract and now have unlimited web browsing. I’d really like to take advantage of this and would like a phone with a reasonable size screen for browsing and email that has a full QWERTY keyboard (preferably slide out).

The downside to all this is I have a budget of about £150 for it.

What would be your recommendations?
Is it possible to get an older model phone and upgrade the O/S to the latest version (if required)?

Thanks in advance?

MrG

WOW £150? good luck with that one mate!:D if money was no object i would buy HTC TD with a fold out or bluetooth keyboard, the screen size is perfect.. If that didnt float you boat then the Touch Dia Pro (it has a slide out keyboard). If you need to stick to your 150 quid, then goto ebay ( always shop wisely) and get a second hand tytn II. My mate got a Orange locked one for £80. It was a little bruised shall we say, but the screen was perfect. THen goto the the kaiser section (tytn II) and CID unlock your phone (use the guide) and then smile with glee as you use it on your network!:D (donate to the maker of the app if succesful)

If your feeling brave after getting used to your device, try one of the many good cooked roms, they work well on the Tytn II. I helped my mate get started and now he is a flash-a-holic!

GOOD LUCK & ENJOY.

[MrGansburg]

WOW £150? good luck with that one mate!:D if money was no object i would buy HTC TD with a fold out or bluetooth keyboard, the screen size is perfect.. If that didnt float you boat then the Touch Dia Pro (it has a slide out keyboard). If you need to stick to your 150 quid, then goto ebay ( always shop wisely) and get a second hand tytn II. My mate got a Orange locked one for £80. It was a little bruised shall we say, but the screen was perfect. THen goto the the kaiser section (tytn II) and CID unlock your phone (use the guide) and then smile with glee as you use it on your network!:D (donate to the maker of the app if succesful)

If your feeling brave after getting used to your device, try one of the many good cooked roms, they work well on the Tytn II. I helped my mate get started and now he is a flash-a-holic!

GOOD LUCK & ENJOY.

Thanks for the reply.

I was fancying the HTC Touch Pro (it looks stunning) but simply can't stretch to that budget so a 2nd hand Tytn II is exactly what I've been looking for over the past day or so. Got my eyes on a few so fingers crossed...;)

Don't mind a locked device as it was when I was looking for possible ways to unlock it that I found this site. Don't mind having a go at flashing etc but will have to read aplenty first to make sure I don't brick it.

I was also going to run any potential phone's IMEI through that CheckMend service to see whether ot not it had been registered nicked.

I shall make my purchase and will be back...

[tony1985]

Does anybody know how to change the bars on the top and bottom of the screen to different colors and possibly give them the "3d" effect they have on the xperia silver theme. I want to make them have that 3d glossy effect but be black. I downloaded a simple skin that's supposed to make them black and glossy on any wm6.1 device but instead they went gray just like the xperia silver theme.
any suggestions?

thanks
Edit/Delete Message

[bbobeckyj]

Does anybody know how to change the bars on the top and bottom of the screen to different colors and possibly give them the "3d" effect they have on the xperia silver theme. I want to make them have that 3d glossy effect but be black. I downloaded a simple skin that's supposed to make them black and glossy on any wm6.1 device but instead they went gray just like the xperia silver theme.
any suggestions?

thanks
Edit/Delete Message

google UITweaker

[avenger2540]

Please I Need Some Guide Me To Get The Rc30 On My G1 And Explain To Me How To Do It Step By Step, I Know You Guys Post Like How To Do It But I Need To Know How I Boot My Phone And Other Stuff,i Download Image Mod Like The Recovery Image To My Pc And Then I Put In To My Phone But I Don T See It So Please If Someone Can Help Me With This I Will Thanks Much. If :(

[MrGansburg]

Originally Posted by timmymarsh
WOW £150? good luck with that one mate! if money was no object i would buy HTC TD with a fold out or bluetooth keyboard, the screen size is perfect.. If that didnt float you boat then the Touch Dia Pro (it has a slide out keyboard). If you need to stick to your 150 quid, then goto ebay ( always shop wisely) and get a second hand tytn II. My mate got a Orange locked one for £80. It was a little bruised shall we say, but the screen was perfect. THen goto the the kaiser section (tytn II) and CID unlock your phone (use the guide) and then smile with glee as you use it on your network! (donate to the maker of the app if succesful)

If your feeling brave after getting used to your device, try one of the many good cooked roms, they work well on the Tytn II. I helped my mate get started and now he is a flash-a-holic!

GOOD LUCK & ENJOY.

Thanks for the reply.

I was fancying the HTC Touch Pro (it looks stunning) but simply can't stretch to that budget so a 2nd hand Tytn II is exactly what I've been looking for over the past day or so. Got my eyes on a few so fingers crossed...;)

Don't mind a locked device as it was when I was looking for possible ways to unlock it that I found this site. Don't mind having a go at flashing etc but will have to read aplenty first to make sure I don't brick it.

I was also going to run any potential phone's IMEI through that CheckMend service to see whether ot not it had been registered nicked.

I shall make my purchase and will be back...

Got (what I think) is a good one from a reliable seller from eBay. Spent a while looking and reading here and went for it using Olipro's Kaiser SIM/CID Unlocker & Changer - works a treat. Cheers, timmymarsh - onto ROMs next...

[timmymarsh]

Got (what I think) is a good one from a reliable seller from eBay. Spent a while looking and reading here and went for it using Olipro's Kaiser SIM/CID Unlocker & Changer - works a treat. Cheers, timmymarsh - onto ROMs next...

:DNo problem my friend. Welcom to the freedom of choosing whatever you want...my mate has the hyperdragon III and he loves it....so maybe worth a try. Flashing is no more complex than the unlocking you have already done....beware tho, it is addictive trying lots of roms:D

Let em know what you went for.

[rhoff412]

I am a newb. I'm almost sure I get the metaphor with brick, but how does this happen? I'm guessing it's totally irreversable? How is it that hardspl loads onto the phone through a windows sync? Sorry, I just have no idea.

I got an att fuze and I'd like to flash a new rom but i'm pretty freaked out about doing it. Did you say that I would need to flash a new radio as well? I'd like to get a good understanding of what I'm doing before doing this. Any things online I can read about this on? I already read this tutorial and looked up some defintions and read all the posts before mine.

P.S. I'm also looking into rerouting the Push to talk button> I know this is done through the registry files, but how? Is there like a command prompt for pocket pcs? or do I make an exe or something on my pc then copy and paste it into a folder like "kaiser tweaks"?

[fleshdeep]

Very simple question I have. Is anybody here looking into the Samsung Behold to get it open sourced?

[timmymarsh]

I am a newb. I'm almost sure I get the metaphor with brick, but how does this happen? I'm guessing it's totally irreversable? How is it that hardspl loads onto the phone through a windows sync? Sorry, I just have no idea.

I got an att fuze and I'd like to flash a new rom but i'm pretty freaked out about doing it. Did you say that I would need to flash a new radio as well? I'd like to get a good understanding of what I'm doing before doing this. Any things online I can read about this on? I already read this tutorial and looked up some defintions and read all the posts before mine.

Do search and read the wiki on how to unlock & hardspl, then read on how to flash a rom and what kind is best for you. Did you google "att fuze roms"? i did and it brought up many results:D Have fun and take your time to read and understand, believe me the info is here but you need to take time.

[rhoff412]

I

Do search and read the wiki on how to unlock & hardspl, then read on how to flash a rom and what kind is best for you. Did you google "att fuze roms"? i did and it brought up many results:D Have fun and take your time to read and understand, believe me the info is here but you need to take time.

Thanks. I really like how much help everyone is. I usually read for about a half hour befor asking a question here. A few questions I think that would help all noobs:

What is the differece between flashing a new rom and just changing registries in WM (other than looks)?

What exactly happens when a phone is bricked? I ask exactly because everyone just says that it did not go through right. I get that, but what is "it" that happens to the phone/ why is it irreversible? The most programming experiance I have is with C and things like the arduino. Those cannot be permanently broken unless it's physical.

Once Hardspl is ?flashed? (right word for an spl?) and done and good is it still possible to completely brick a phone while just trying to flash a new rom?

If I have a warranty issue and flash the original rom back onto the phone, will the techs be able to see that it's hard spl on the phone and not their spl?

(On the warranty thing): If my phone becomes completely unoperational (wont turn on), will I be able to flash the original rom without being able to directly input on the phone(push buttons/ screen etc.)?

Sorry for the dumb noob questions, but I have no idea about alot of things and can't seem to find them here or on google.

Trying to avoid posting in two places unless you request: In the FAQ tab, you all should have a little Noob info thing to answer dumb questions like mine so you don't have to explain over and over again something relative to a little kid asking why repeatedly.

[rhoff412]

Sorry I forgot a question. If I did a hard reset, the rom remains on the phone right? But what about the registry changes? They are reset to whatever WM had them set to correct? Or is it the rom that sets them originally?

Thanks so much for dealing with me. I hope after dec 11th (last day of finals) I can devote some time to this and maybe make a noob guide from all of the answers.

[e3esxt02]

0Oh, one more [Question], I have HTC TOUCH from verizon ( I love this phone) anyway, the one thing I want to fix in this phone is I need to add some Cities zip code that it does not have, is there any patch file I can run to up-date all USA cities for Weather?


help! i didn't see any one answer this.

[timmymarsh]

help! i didn't see any one answer this.

Try this, may help http://forum.xda-developers.com/showthread.php?t=319187

[timmymarsh]

Thanks. I really like how much help everyone is. I usually read for about a half hour befor asking a question here. A few questions I think that would help all noobs:

Dude, half an hour reading is not enough:D XDA will always try and help if you helo yourself, sometimes i have looked for hours before asking for help.

What is the differece between flashing a new rom and just changing registries in WM (other than looks)?

Do search the wiki about flashing roms, the info is there. basically no matter how many reg changes you make, looks, performance and how the rom behaves is what the rom is.

What exactly happens when a phone is bricked? I ask exactly because everyone just says that it did not go through right. I get that, but what is "it" that happens to the phone/ why is it irreversible? The most programming experiance I have is with C and things like the arduino. Those cannot be permanently broken unless it's physical.

Bricked, or doorstop or paperweight, what ever you want to use it for:D has usually occured becuase you have made an error such as (for example on a prophet) flashing G4 rom on a G3 device (yes it has been done lots of times). If you look up IPL, SPL and what these functions are you will understand why bricking occurs.

Once Hardspl is ?flashed? (right word for an spl?) and done and good is it still possible to completely brick a phone while just trying to flash a new rom?

Yes if youve been a complete arse and tried to flash a rom not for your device (it has been done, mad i know) but if you have the right rom for your device it is unlikley. You might get stuck on bootloader (tri colour screen) but this is normally recoverable. I flashed my prophet with a new rom recently and this happened, i just take out the battery and put it into bootloader manually then flash again and it worked. I forget your device now, but READ READ and READ.

If I have a warranty issue and flash the original rom back onto the phone, will the techs be able to see that it's hard spl on the phone and not their spl?

Im tired now... yes they will be able to tell and even if you flash an original rom, i do belive they can still tell, although not so obvious.

(On the warranty thing): If my phone becomes completely unoperational (wont turn on), will I be able to flash the original rom without being able to directly input on the phone(push buttons/ screen etc.)?

As above, i would never recomend flashing a device in warranty, but hey, i did it haha, but i read for HOURS and HOURS and made an informed decision.

Sorry for the dumb noob questions, but I have no idea about alot of things and can't seem to find them here or on google.

ALL your answers are on here, you need to spend longer searching and learn how the search works, the wiki is great too. Sometimes how you word a search makes all the difference.

Sorry I forgot a question. If I did a hard reset, the rom remains on the phone right? But what about the registry changes? They are reset to whatever WM had them set to correct? Or is it the rom that sets them originally?

Hard reset will revert the rom back to its original state, that is like it was after you flashed it. All programs, reg changes will be lost, so back up!!

I have said it before, spend TIME reading, please, even in different sections you will pick up knowledge and see silly mistakes some people have made. You dont need to do a noob guide, there are loads on here!! I spent about 6 days solid reading before i flashed for the first time.

Apologies to all reading for the long post, just doing my bit for the good of the community.....

[rhoff412]

thanks for the help. I was kind of hoping for an complete intro guide somewhere. Started reading the glossary and will try to make better searches. Thanks for the patience.

[ms64o]

Hi there,
I try to write a hook dll to inject some code in API functions. I have build a DLL, which is injected in filesys.exe and replaces the pointer for e.g. CreateDirectory (Api 20 Method 2). But nothing happens if I create a new folder
If I check the API sets in an other function they keep unchanged. I assume I miss a part which makes the API set global.
Any help would be welcome
ms64o

[Sonic1971]

I have a question that I cannot seem to find an answer to. I have recently bought a HTC Touch HD. (ROM 1.14.404.3)
My company enabled push-mail so that I receive my business emails. Part of installing this meant I had to confirm the security policy. This policy means the phone locks every 15 minutes. I cannot skip this setting because it is greyed out. :mad:

As you can understand, this is a very irritating setting, especially when navigating with my device.
Anybody got any idea's on how to change this setting (and still retain my company push-email?)

Regards,
Sonic

[bbobeckyj]

I have a question that I cannot seem to find an answer to. I have recently bought a HTC Touch HD. (ROM 1.14.404.3)
My company enabled push-mail so that I receive my business emails. Part of installing this meant I had to confirm the security policy. This policy means the phone locks every 15 minutes. I cannot skip this setting because it is greyed out. :mad:

As you can understand, this is a very irritating setting, especially when navigating with my device.
Anybody got any idea's on how to change this setting (and still retain my company push-email?)

Regards,
Sonic
you can reg edit or use (for example) schap's config tool, change the security warning setting to off

[amir_70]

I install some Theme for touch flo 2d from customizer and now i want to delete this theme and back to original theme . how i can do ?

[timmymarsh]

you can reg edit or use (for example) schap's config tool, change the security warning setting to off

I tried this using adv config and this does not work. I have looked in the registry but not sure what keys to alter, can you point me in the right direction please? Many thanks.

[ms64o]

Forget it, using release instead of debug binaries works wonders...
ms64o

Hi there,
I try to write a hook dll to inject some code in API functions. I have build a DLL, which is injected in filesys.exe and replaces the pointer for e.g. CreateDirectory (Api 20 Method 2). But nothing happens if I create a new folder
If I check the API sets in an other function they keep unchanged. I assume I miss a part which makes the API set global.
Any help would be welcome
ms64o

[calcop]

On your storage card, create a folder called "2577" (I think it's that for ARM processors) and place the exe in that folder you want to execute. Call it "AutoRun.exe" now, every time the storage card is inserted, that program will be run.

Someone can explain me why on my htc hd the file autorun.exe(should install IIWPO) on 2577 folder doesn't start when SD is inserted?thanks

[lalek]

can someone please tell me what is bricked device and if i try to flash and by some chance brick my phone, is there any way back? tx

[joel2009]

A bricked device is just that: a brick (a very expesive paper weight)

If a phone is trully bricked then no, there is nothign you can do to recover it.
If you can put the phone into the boot loader than you can fix it.

[timmymarsh]

I have a question that I cannot seem to find an answer to. I have recently bought a HTC Touch HD. (ROM 1.14.404.3)
My company enabled push-mail so that I receive my business emails. Part of installing this meant I had to confirm the security policy. This policy means the phone locks every 15 minutes. I cannot skip this setting because it is greyed out. :mad:

As you can understand, this is a very irritating setting, especially when navigating with my device.
Anybody got any idea's on how to change this setting (and still retain my company push-email?)

Regards,
Sonic

Bump..... anyone know how to get rid of this. I removed the settings from active sync so it no longer connects to my exchange server, but the lock settings are still active and greyed out??? Anyone know of the reg key to disable the lock?:D

[matumartin14]

What differences does it have compared with htc touch diamond?
Is it unlockable? I mean SIM?

[mightyez]

hi guys i am new to the site so i apologise is this has been asked and anwsered before.
i have an xperia x1, i have seen on the site that youtube and the htc keyboard can be downloaded for the x1.
i have tried doing this but it downloads abit then starts again, i am just wondering do i open it or save it?
and if i save it where too?
or what is the process to get this on my phone?

[joel2009]

Bump..... anyone know how to get rid of this. I removed the settings from active sync so it no longer connects to my exchange server, but the lock settings are still active and greyed out??? Anyone know of the reg key to disable the lock?:D
What exactly do you mean it locks... like the screen locks or the connects drops....

I don't have an hd but i can try and help

[timmymarsh]

What exactly do you mean it locks... like the screen locks or the connects drops....

I don't have an hd but i can try and help

Well my exhange server has security restrictions so the device lock was enabled, i chose simple 4 digit lock for ease of use. It locks after 1 hour (the maximum time allowed by server).

I have removed the server settings from active sync, as i no longer use it for work. The device lock app is still active and the box where you can select to use lock or not is greyed out. I assume that the security settings impossed by my works exchange server are still activated. I guess there must be a reg setting to make this inactive, but cannot find where (i dont mind reg changes but some are a bit extreme!:D)

Thanks Joel, and happy new to everyone (in advance)

[lalek]

i did everything that was in this post (http://forum.xda-developers.com/showpost.php?p=2415645&postcount=3) and now i "upgraded" my device info from

Touch version : Elf
Device ID : ELF030000
CID : T-MOBL11
IPL : 1.13.0002
SPL : 1.13.0000
ROM Version : 1.13.121.2
ExtROM Version : 1.13.121.102

to

Touch version : Elf
Device ID : ELF030000
CID : T-MOBL11
IPL : 2.26.0002
SPL : 2.26.0000pof
ROM Version : 1.13.121.2
ExtROM Version : 1.13.121.102

does the new IPL and SPL mean that my phone now is CID unlocked and how can i check it?

I do all this coz i want to flash Onyx 4.1.4 Ultimate rom. Thanks!

Edit: I did want to try this method (http://forum.xda-developers.com/showpost.php?p=1695355&postcount=1) but it seems that the link for the mtty tool is broken and i couldn't find it elsewhere

[joel2009]

Well my exhange server has security restrictions so the device lock was enabled, i chose simple 4 digit lock for ease of use. It locks after 1 hour (the maximum time allowed by server).

I have removed the server settings from active sync, as i no longer use it for work. The device lock app is still active and the box where you can select to use lock or not is greyed out. I assume that the security settings impossed by my works exchange server are still activated. I guess there must be a reg setting to make this inactive, but cannot find where (i dont mind reg changes but some are a bit extreme!:D)

Thanks Joel, and happy new to everyone (in advance)


I found this:

First enable the box again to untick it:

HKLM\Security\Policies\00001023

0 = Enabled; 1 = Disabled

Then install the cab below (Zenee.com Stay Unlock.cab) and soft reset your device.

This program will prevent the lock to be activated again.


Download (http://forum.xda-developers.com/attachment.php?attachmentid=65663&d=1200139742)

[lalek]

i did everything that was in this post (http://forum.xda-developers.com/showpost.php?p=2415645&postcount=3) and now i "upgraded" my device info from

Touch version : Elf
Device ID : ELF030000
CID : T-MOBL11
IPL : 1.13.0002
SPL : 1.13.0000
ROM Version : 1.13.121.2
ExtROM Version : 1.13.121.102

to

Touch version : Elf
Device ID : ELF030000
CID : T-MOBL11
IPL : 2.26.0002
SPL : 2.26.0000pof
ROM Version : 1.13.121.2
ExtROM Version : 1.13.121.102

does the new IPL and SPL mean that my phone now is CID unlocked and how can i check it?

I do all this coz i want to flash Onyx 4.1.4 Ultimate rom. Thanks!

Edit: I did want to try this method (http://forum.xda-developers.com/showpost.php?p=1695355&postcount=1) but it seems that the link for the mtty tool is broken and i couldn't find it elsewhere

"SOLVED" :) ok i was asking something that i already knew. probably i just wanted somebody to give me a GO to do my first flash. Well I did it this morning and i'm feeling great. faster device, lots of free memory, everything previously that needed lots of adjustments and installs (like youtube, miniopera...) works great on my new ROM.

[gonsas1978]

Hi to all !
I need your help to find a software for Pocket PC (freeware or paid) to meet the following objective:

I have a friend who has some hearing difficulties and sometimes he has some difficulties in meetings to hear the interlocutors especially if the other person is away from him or if the room has poor acoustics.
Since he has a PDA, I remembered if there would be a software that captures the voices / conversations of other people through pda micro and transforming the voice into text on the PDA.

It was like having a conversation but with subtitles in support pda :)

More complete even if the software would be functional to conversations in foreign languages, that is, we are talking to another person who speaks for example in English and the software captures the voice and automatically translates to Portuguese or other language on pda what that person has said. Is it possible? This software exists?

Thank you for your help and sorry for my poor english!
Gonsas

[timmymarsh]

Download (http://forum.xda-developers.com/attachment.php?attachmentid=65663&d=1200139742)

Joel, many thanks my friend. This worked, after installing the BAC i was able to uncheck the tick in the lock screen, the setting had been restored. Worked like a treat!:D

[joel2009]

np, anytime ;)

[GregTHEnewGUY]

I have an X05HT and i am in love with it.. the only thing is i don't read japanese.... I purchased SelMUI version 2.2 (Kinda like CE-Star which changes UI from Japanese to english... made by Mobem....) and it worked. My problem is when i installed that software i am no longer able to access my Softbank SMS or S!Mail and folders... i can recieve emails but i can't respond....

The only thing i can do is switch back to Japanse but when i do that the program soft resets the phone..... EVERY TIME (VERY ANNOYING)

also i noticed that when it rebooted after soft reset an error messge popped up "An error occuried with cprog.exe" Is there anything i can do to get this running properly?

all your assistance is greatly appreciated

very respectfully,
GregTHEnewGUY

[cvinay83]

guys out there ..please help me out in installing windows mobile 6.1 diamond edition .. as i am an not much aware bt have some basic idea .... i use O2 XDA2 with WM2003SE ... i need step by step installation ....:)

thanks in advance

[Flipme23]

I recently purchased this phone, and currently trying to mess around with it. I installed M2DC so that I may use a custom skin. However when I run M2DC and choose my custom skin to apply, the phone interface doesn't load. I think TouchFlo isn't loading so I just have a the stock background and the menu options but no interface. I had to do a full reset so that TouchFlo functions correctly again. Is there anything that I am doing wrong?

[ilNebbioso]

Hello everybody.
I'm using an HTC Touch (Elf) since more than two years. I also successfully cooked different roms on it, without any problem. Actually, I'm using this one (http://forum.xda-developers.com/showthread.php?t=395070).

But, since I moved to 6.1 with last TWO roms, I noticed a problem.

I normally use a Bluetooth headset (Plantronics 640) to make/receive calls. Normally phone is always in Vibrate mode.

So, when I finish a call (no matter if received or done) using the Bluetooth headset, my Elf goes from vibrate to silent mode.

This happens ONLY when using the Bluetooth headset: never without it

As you can imagine, this is very annoying.

I also found a post on this external forum (http://pdaphonehome.com/forums/htc-touch-touch-dual/113691-using-bluetooth-headset-makes-phone-go-into-silent-mode.html) where some people encounter the same problem with different phones/headsets, but nobody has helped them.

Does anybody have an idea how to solve it or which app caused it?

Thank you for your help.

[timmymarsh]

I found this:

First enable the box again to untick it:

HKLM\Security\Policies\00001023

0 = Enabled; 1 = Disabled

Then install the cab below (Zenee.com Stay Unlock.cab) and soft reset your device.

This program will prevent the lock to be activated again.


Download (http://forum.xda-developers.com/attachment.php?attachmentid=65663&d=1200139742)

Whilst this did the trick, after a week of testing i found this drastically reduced battery time, must be a memory leak or something (battery was red hot), so had to unistall....never mind, back to the unlock screen. Thanks for your efforts tho Joel.

[Astronout]

Hi Guys,

I've been looking for this for a while now, and I can't seem to find it anywhere.

So here it goes: is there any way to back up / synchronise text messages (and preferably call history as well) to the exchange server in real time?

I used Sprite Archie for a while to achieve a similar effect, but it had as main disadvantage that it worked only one way, rather than e.g. synchronise. There are programs (e.g. Jeyo Mobile Companion) that synchronise your text messages to Outlook, but unfortunately to a seperate pst file.

Hope you can help me out. Thanks in advance!

[timmymarsh]

Hi Guys,

I've been looking for this for a while now, and I can't seem to find it anywhere.

So here it goes: is there any way to back up / synchronise text messages (and preferably call history as well) to the exchange server in real time?

I used Sprite Archie for a while to achieve a similar effect, but it had as main disadvantage that it worked only one way, rather than e.g. synchronise. There are programs (e.g. Jeyo Mobile Companion) that synchronise your text messages to Outlook, but unfortunately to a seperate pst file.

Hope you can help me out. Thanks in advance!

Right. Now im not aware of being able to do this via exchange, but i used to have a program (not freeware but about 20$) that when active sync with computer would create a folder in your outlook folder with all the texts in. If you device was still synced, you could then send and receive new texts via out look, which was pretty cool. erm try googling true connect and check it out.

[Mechcondrid]

ok ive been usuing DCDs roms since i got my titan and with his new rom 3.3.4 im reading in the thread that he got banned and gave up on this rom and made a new one where do i get this new rom and has he really been banned? just clueless here so dont bite my head off if im violation some unwritten rule about not talking about it

[READREADERS]

Damnit! Some of us like flaming people :D

Good idea though, and I hope to be able to help...
dont flaming get you banned

[Silicant3D]

Hello,

Where can I find the WinCE.NLS file structure documentation?
I would like to understand what is contained in this file before I consider replacing or modifying it.

Sincerely,

Silicant3D

[Duztenz]

Nooby who just got an X1 after months of failed attempts. Excited about the phone and have already installed several aps. One of which is Voice Command 1.6.

I have two questions regarding this program:

1. It appears I downloaded the UK version by accident and the program wants to always add a zero to each number I dial. Is there a way to remove this "assistance"? Or do I have to pay for another download of the US version?

2. I cannot seem to initiate any voice commands through a BT headset. I am using a Jawbone 2. It pairs fine and I get the audio from the phone through the headset, but the Voice Command program is useless without being able to initiate, speak and hear, through the BT headset.

Any ideas???

[Duztenz]

...and I have tried a reg edit, changing the "BTAGExtModule" to "vcbthag.dll". I found this in another thread, however this did not fix the problem.

Thank you for any help you can provide.

[lcarter0604]

brand new at this and looking to get the correct software for making the graphics (for doing icons and backgrounds). what do you guys suggest...thanks for the help you guys rock!

[Girvo]

With all the Android ports floating around, is it actually possible to *replace* Windows Mobile with Android on any handset? Or is Haret our only way?

[supermanage]

I have the HTC Fuze, and it comes stock with JETCET PRINT 5. However, I never configured it (never even ran the application). Meanwhile, I have my computer (with bluetooth dongle) paired with the phone, and can do audio streaming, FTP, etc.

I was in my messaging on my fuze when I noticed in the context menu (tap and hold) there is an option "Print via Bluetooth..." I selected it, and it found my computer, and asked me paper type, number of copies, etc.. and then it immediately printed from my usb printer attached to the computer. The phone accessed the "PIM Item Transfer" service on the computer to print, which I didn't think had anything to do with printers.

When I go to configure JETCET PRINT, it seems like it will only recognize Bluetooth printers. I did the search for devices and my computer did not come up. If I try to use the "Print..." option in the context menu in File Explorer, it comes up with a blank list of printers to choose (I think that uses JETCET).

I also notice that in the "Pictures and Videos" application there are two options: "Print..." and "Print via Bluetooth..." I tried "Print via Bluetooth..." (which worked for messaging) and "Print..." came up with the same blank list of printers like in File Explorer. Neither one worked for the image I tried to print, but it did send the image to my computer.

My question is...what is the option in my messaging menu "Print via Bluetooth..." from if it's not from JETCET. If WinMo already has built in print support, I would like to know how to use it (if possible) in more places on the phone.

Thanks for your time.

[Blackspider]

hey guys i tried searching the site but i failed 2 understand what touchflo manila 2d is all about. since im new in the site i would appreciate if anyone can update my knowledge.
thanks in advance

[joel2009]

hey guys i tried searching the site but i failed 2 understand what touchflo manila 2d is all about. since im new in the site i would appreciate if anyone can update my knowledge.
thanks in advance
It is a today screen replacement

[joel2009]

With all the Android ports floating around, is it actually possible to *replace* Windows Mobile with Android on any handset? Or is Haret our only way?
No, currently haret is the only way to run linux on our devices..... on most devices i is not stable enough to even replace windows mobile, so there isn't a very big need for it yet.

[Silicant3D]

FYI, I found a nice overview of the WinCE 6.0 build process.

http://www.synnex.com.tw/oem/mic_lin...E6.0%20MOC.pdf

Anyway, I am still looking for a more detailed file specification. Your suggestions would be appreciated.

[joscopp]

brand new at this and looking to get the correct software for making the graphics (for doing icons and backgrounds). what do you guys suggest...thanks for the help you guys rock!

1- Put up your profile
2- go to the section of your DEVICE.
3- start reading all fixed posts, on the top of the page.
4- Then ask your questions if you do not find your request.

Good luck

[cjclark]

The external speaker isn't working with the custom ROM, i.e. not ringing with incoming call. Is there a setting or registry setting I need to change to get it to work?
Rom date 10/3/07
Radio 1.16.00.00
Protocol 32.53.7018.01h

[disceptre]

can someone help me install ifonz on my phone

its a samsung i760 with WM6

i know how to put apps and themes on my phone.
i bought ifonz 1.1.2 and it came in a .zip file with a .exe file in it

it gives me thiis when i have activesync open and try to install
http://i193.photobucket.com/albums/z28/disceptre420/funny%20web%20stuff/1-1.png

i click "ok" and this is what i get and i cant do anything but close it
http://i193.photobucket.com/albums/z28/disceptre420/funny%20web%20stuff/2.png

Then when i try to put the whole .zip file on my phone and install it, it says
"an unexpected error has occured in ifonz.exe. Select quit and restart this program or select "details" for more information

anybody have any advice? thanks in advance

oh ya. i have .net 3.5

[hotrod101]

can someone help me install ifonz on my phone

its a samsung i760 with WM6

i know how to put apps and themes on my phone.
i bought ifonz 1.1.2 and it came in a .zip file with a .exe file in it



Your first mistake was paying for IPhonz - It is freeware found on this site
http://translate.google.com/translate?client=tmpg&hl=en&u=http%3A%2F%2Fthedogcorner.blogspot.com%2F&langpair=it|en


This is the latest XDA Thread on IPhonz
http://forum.xda-developers.com/showthread.php?t=436656
Download IPhonz again as it is simply a cab and easy to install just by putting the cab on your device and clicking the cab once on your device and following instructions to install as with all other cabs.

Sorry you got ripped off by paying for IPhonz - You should try to get your money back, although, I would be surprized if you do. Good luck

Edit: Sorry, I just read a bit on the Iphonz developers home page and it seems he got rid of cab version and you just put the program right to your device and run it - Read from first link I provided - SSJ5Trunks blog which has Iphonz program for download.
Read second link to figure out how to use it and search for any answers to any further questions you may have.

[disceptre]

thats the one i downloaded. i didnt pay, i just wasnt sure if i was gonna get anyone in trouble or not cuz i wasnt sure if it was freeware.

i did search as well as tinker around myself and couldnt come up with a solution. i think that file may be corrupt or something cuz i simply cant get it to work

thanks for the help. any more ideas

[jamescharisse11]

hi, quick quistion,is there anyway to have animated weather? :rolleyes::rolleyes::rolleyes:...

[PhoneGuy58]

Hi everyone,

I downloaded and successfully installed S2U2 for my Sprint HTC Touch Pro.

Everything works except Caller ID does not display a FULL SCREEN image from top to bottom (though full screen is set in options) only side to side with about a half inch on the top and bottom reserved for caller id info. (which is solid text, not superimposed over the image)

How can i set Caller ID like your demo picture for fullscreen?

TIA

Jeff

[PhoneGuy58]

Seems to have been an isolated case, did that on only one contact, others seem to be ok

[PhoneGuy58]

program works great, though Fullscreen caller ID (at 3.2 megapixels is blurred)

Is there a solution?

TIA

Jeff

[PhoneGuy58]

Dont assign from camera to contacts, go to albums then assign

GREAT program

[ddutchie]

I have a question

What is the difference between flashing your RADIO or your ROM
ROM is quite obvious, but what exactly does flashing your RADIO do¿

I have searched, both here and google, but cant seem to find the answer that i can fully understand.

Thanks

[Addicted2xda]

I have query (though I am a 'senior member' :D):
In S60 3rd Edtn mobiles, there is an option to set ringtones to a Category or send mails to a category. Is there any registry hack or any free ware available for Vox / Gene (preferebly both :D) to do that. I would prefer a registry hack though.
Thanks
waiting ...:confused:

[ladyofthemists]

Not to sure if this is where i should be asking this or not. Tried under the Manilla 2D customize thread already as well. What i want to know is there a tutorial on how to make themes for Manilla 2D? I want to do some edits to it but don't know what i need for it or how. I have more but i hope this being answered will help me out with the rest.

Thank you very much for any and all help.
Ladymist

[aamir_aw]

Hello, I have a problem with O2 XDA Exec phone. It works fine as long as I don't press the power button,or the screen doesn't go off. But when I press the power button, the screen fails to get on again. Even with the screen off, the phone continues to work in the background, as the LED on top continues to blink and when I dial it from another phone the bell goes, but I can't hear the ringtone nor can receive the call. And the screen remains off untill I do a soft reset- after which it is absolutely normal untill I press the power button again. Do you have any idea why this might be happening?

[claus1953]

Hi all
I have a strange problem:
I have the cooked ROM installed as per my signature as well as M2D mentioned below in a HTC touch Elfin.
Suddendly a notification for new voice message comes up. I check my VM box and nothing is there. Then i delete the notification in HKCU/system/messages/VM by setting the counter to 0. Later the same notification comes up again or latest when restarting my phone or after a soft reset, i deleate it again and so on. It is not phone company related as i changed my sim card to another phone and this does not happen, so it must be my phone.
Any hints?

[blitz69]

hi everyone, this is my first time posting anything on here so if im doing it wrong i apologize in advanced. ok my question is, has anyone every used the TellMeText program by blondiesoft.com and successfully completely removed it from there phone. it was about 2 weeks ago when i found the program on here and thought i would try it out. its a good app but i just dont care for it anymore. i unistalled it and soft reset my phone. later that day a friend of mine called and the program till said "incoming call from ******", so i then hard reset it. still there! i then reflashed the rom, thinking that would take care of it. nope still there. so i reflashed the back to the att official rom, and then back to the duttys rom im useing and the damn thing is still there! and i cant seem to locate anything in the registry pertaining to the program. so if anyone can please help i thank you in advance as well!

John

[pureclutch]

I have an Omnia 910 and successfully installed coreplayer and wvd. I can access content no problem. Coreplayer opens the stream no problem. The problem I am having is once it starts, it buffers every 6-10 secs and can be quite annoying. Should I expect this or can I fix this. Any help would be greatly appreciated. Thanks

[tatarasi]

Hi,
sometimes, when I close an application, and the Today Screen appears, the upper tray is missing (not loading), and it shows like in the image.

No Refresh is helping, nor "reload.ini" (of UL), only soft reset.

Does anyone know what causes that, and how to eliminate this issue?

thanks

[m.bhogavi]

can anyone tell me how to hack aircel karnataka for gprs.
Thanks in advance!

[lala_25]

HY, I loking a software who can automaticaly record all my calls silence in my phone without beep and withowt be necesary to conect my phone to pc to can record calls or sending via e-mail, because i don't have internet on my phone yet.
i have sony ericsson X1 Xperia and Nokia 6303.
kiss kiss
have a nice day

[PharrellVP]

Hi. I heed a little help about German HTC Wizard (Qtek 9100), branding with O2, which ROm is in German and i can't change it. I've changed a couple ot ROMs, but it didn't worked out. What I'm supposed to do to change the ROM in English? Please, help me with it!
Thank's in advance!

[tatarasi]

HY, I loking a software who can automaticaly record all my calls silence in my phone without beep and withowt be necesary to conect my phone to pc to can record calls or sending via e-mail, because i don't have internet on my phone yet.
i have sony ericsson X1 Xperia and Nokia 6303.
kiss kiss
have a nice day

you may want to check this out
http://forum.xda-developers.com/showthread.php?t=493118

I believe it works with the built-in voice recorder, if you don't have Audio Touch Notes, e.g. (my experience is that it doesn't work too well with Resco Recorder)

all the best

[avata]

Hi i have a samsung blackjack II was installed a room and you disconnect the battery and
does nothing not connect to the computer and presented on the screen nadamas samsang died or was I being told that hacer. por favor

[blm71]

Hello. I don't know if this is the right forum. If not then please re-direct me. On my Dash 3g updated to 6.5, when I use any of the sliding homescreens (i.e. Sliding panel, Sliding panel Media, T-mobile basic, T-mobile default) My calendar will only display appointments the day before they are due, not the day of the appt. I did not have this problem before I upgraded to 6.5. When I go to the other style homescreens, such as Windows basic, it will show the appt until it is finished. I use this for reminders to pay bills throughout the month, and to only show up one day, and that being the day before, just doesn't work. Any suggestions? Anybody else having this problem. I usually set the appt/reminder up for a two day period, and it will show on the home screen the day before the first day, then after that it does not show up, but is still on the calendar if I go into calendar. I also am using chome configurator, but was also using before the upgrade. Thanks for any help.

[ray0787]

hi is there any way (aplication or something) that allows the message tone to end when i read the message and not keep playing till the end of the song

i have a motorola a3100 WM 6.1

i´ve searched everywhere for this with no luck i´ve used photo contact pro for a while but the message tone end to quick and it doesn´t vibrate and sound (even when i have configured to do so) it first ring then sound and only for about 5 seconds and thats the closed aplication i have found so far i have tested ringo and motring but they don´t do what i want

sorry for my english i´m from venezuela

[Franky1977]

Hi guys, I posted a thread before with the subject "ROM password" and just now realized what a thread waste that is, pardon to forum admins. I am a newbie that is, and is new to using cooked ROM, passwordded ones esspecially, I am using Itje's Touch IT 2.5 on my X1 and is trying to use NRGZ28's Energy.XPERIA.23559.Sense2.5.GTX.Themed.Apr.17 ROM, downloaded it but is confused with the password. So could you guys give me a clue about it. Thanks a lot.

[Jumba]

Hi, I suddenly have a green light next to my user name. What does that mean?

;)

[joscopp]

That tiy are online, :p

[Jumba]

That tiy are online, :p

Doh! Tnx. Thought I had been promoted.

:P

[KZE]

I've been trying to get my AT&T Fuze to sync (email only) with my office's MS Exchange server. I've gotten it to work periodically, but eventually end up with a message saying I need a personal certificate to log on. My office tech insists our Exchange server doesn't require personal certificates. If I can reliably sync email I'll gladly synch calendar, tasks, and contacts.

[pringo]

Hi to all & thanks for all the help here.

I have a Touch 3G T3238 (Jade 100). I want to change the OS Lang. into English.

I have followed forum.xda-developers.com/showthread.php?t=483465 but I could never enter bootloader in any way!! Vol. down + power does not work! Even if I run bootloader.exe the phone just goes black but, no tri-color!!

When I want to HSPL I get connection error & never goes to tri-color! I have tried all mentioned ways in the link but no use!

Please any other way?? Any help, please??

Thank u.

[kikill]

all u have to do is turn off slide to answer restart the phone and your next call is going to be like that, read the description file in the s2u2 folder that works.

[TheGrudge]

Hi guys, i have HTC Desire and i was having problems with lack of internal memory. I cleared my storage from the bootloader menu today and i noticed that i have only 140mb available. Is the OS using the rest 372mb??? Another thing, i installed one game which apk file is 20mb, after which i checked again and the available memory turned down to 80mb :confused:!!! I uninstalled it and it freed up only 20. After rebooting it freed up another 20, but what about the last 20 and the rest of the memory??? Can pls anyone explain to me as to a noobie what the hell is going on :mad:. I cant use the damn phone like that, i cant install more than few applications. Thanks

[pringo]

Hi every body,

Touch 3G T3238+ cloam is locked & touch is not working @ all!

The "unlock" option is on the bottom L. but, there is no touch 2 tap it!! & I can't hard reset w/ any key combination!

Keys work 4 a new opened window e.g. I can answer a call w/ the keys but, they r inactive on homepage.

Alsp power button doesn't turn the phone off!

When I want 2 install a ROM from SD, there is no touch to choose an option!!

How 2 unlock this phone when the touch is not working???

thank u.

[lakshmanm]

Sorry if this is the wrong forum...but need help. I flashed the GADAM Alpha5 on G tablet...works fine but for a minor issue. Clicking on Home button comes up with force close most often. Any help will be appreciated.

[spawn3ds]

hey just wondering will i follow the steps for 2.2 or 2.1 when i want to unlock the samsung galaxy on froyo.. i dont know if update is different from stock thats why im asking :) thanks

[44z]

I have motorola milestone with following information.
Model number - Milestone
firmware -2.2.1
firmware config: ver: -GAS_EMEA_USAMS1FRYORTGB_P002
Baseband ver: - 3GSMEPU91A_U-91.09.00I
Kernel version - 2.6.32.9-ge635aa4
build number - SHOLS_U2_05.06.0

I would like to know that can I update to Cyanogenmod6 or 7?
Thanks

[nirav_hs]

Hello Guys,
Can anyone help me plz? I am having following issues with my Imate jasjar:-
1. I send my jasjar to a friend away from my city to get my cell's body change. My cell was very well working.

2. nw i have received my cell with a new body and he called me up that my cell have some issues with some hardware so he needs to change them and i asked him to go ahead with it.

3. Nw i m trying to use my cell but my cell is not accepting any of the sim. and i am not able to open the connection management so as to manage the network connections.

4. I am not even able to see my IMEI no in the Device Information and even after i go for *#06#. and The guy he did the cell is not available anywhere.

Can i know what is wrong with it and what can be the solution for the same?

ROM - 1.13.53 WWE
ROM Date - 09/23/05
EXT ROM version - 1.13.137 WWE
The window version is 5.0

Plz help me out.


*************************************PLEASE READ BEFORE CREATING NEW THREAD******************************************** ********
:confused: :confused: :confused: :confused:

ATTENTION ALL XDA MEMBERS:
ATTENTION ALL XDA MEMBERS:

ATTENTION:
THIS THREAD IS NOW LOCATED IN A NEW SECTION OF XDA, "QUESTIONS AND ANSWERS", AND IS NOW USED FOR GENERAL DISCUSSION. While this thread is still open for you to use, so is an entire section, devoted only to the purpose of getting you the answer you need. So please read the rules in the new section and take advantage of it as well as this thread. No questions will be posted as "Unanswered" or "Answered" in this section now.


************************************************** ************************************************** ****************


GENERAL DISCUSSION:

Post ANY question you have in this thread. If your question is about Software, Themes, Skins, Icons, Wallpapers, Today Screens, ROM's, Post it here. If you just have a random question concerning your PPC/Smartphone, Post it here! Any Question, Any Phone, Any Topic, it doesn't matter. Just follow the instructions (this is extremely important, and will determine how fast your question is answered) and I promise you , if there is an answer out there, you will get it here. Also be sure to check the list in the second post for unanswered questions, and give your knowledge to help others, as they are going to help you. If you decide to ignore this thread, and create a new one, only for a question, you will probably only be FLAMED, and more than likley NOT RECIEVE and Answer. Thats why this was created, and it works. Thanks.

[silver_sakura]

many infos i got from this forum :)

[pHyR3]

this forum is great, got heaps of great advice and tips from the posts :D

[bil82pak]

ive got a hd2 that is a tester model.i tried to install android on it by flashing it with magloader.now once the phone is flashed, im strucked on the 3 coloured booting screen.the spl version is 0.66.im unable to update this version.can anyone help me out in this plz :(