Cavalier SSPL (JumpSPL) & HardSPL

[jockyw2001]

Please find attached a SSPL (also known as JumpSPL) for Cavalier. Running it will allow you to flash a HardSPL. The HardSPL is a SPL (bootloader) which can not be overwritten and which allows you to flash roms (both official and cooked roms) and rom parts (radio, OS, splash, etc). If you want to replace the HardSPL you must run the SSPL again and then flash another SPL.

Make sure your device is application unlocked. If not, run the attached SDA unlocker on your PC and reboot your device when prompted.

Connect your device with a usb cable and make sure activesync is green and ready with syncing. Unzip the files in a single directory on your PC and run "sspl.bat". Confirm each step by pressing enter and also check the display of your device.

If all goes well the display changes to the tricolor bootloader screen or it may turn grey, black or white. Disconnect and reconnect usb cable and wait 20 seconds. The activesync will disconnect. Unzip "HardSPL-Cavalier-1.0-JockyW.zip" and flash the HardSPL by running "ROMUpdateUtility.exe".

Rom cooking for Cavalier can now start.

Have fun!

[alawishas]

Good man! Now let's see if someone smarter than me can cook up some WM 6.1 for Cavalier ...

[ibeqa]

Good work, thak you all.

Now, can anybody tell me which tools are needed for cooking a WM6.1 rom for Cavalier.

Cheers

[yuval gur]

Thank You!!!!

[adminsun]

Good work, thak you all.

Now, can anybody tell me which tools are needed for cooking a WM6.1 rom for Cavalier.

Cheers

Maybe you can see some tools for C720W.

[hsia]

Good work,thanks!

[Lanke Tang]

Hoho ...........

So Happy To Find This , Tks !

[Tranego]

it works perfectly!!

i did update the rom but i still have the same problems like before...the camera doesn't work

[Lanke Tang]

TOO BAD

I can't download!!! why?

Somebody help me !

[hitori]

too bad...
my phone cant run this is program, whay? help me

[helpme]

Please find attached a SSPL (also known as JumpSPL) for Cavalier. Running it will allow you to flash a HardSPL. The HardSPL is a SPL (bootloader) which can not be overwritten and which allows you to flash roms (both official and cooked roms) and rom parts (radio, OS, splash, etc). If you want to replace the HardSPL you must run the SSPL again and then flash another SPL.

Make sure your device is application unlocked. If not, run the attached SDA unlocker on your PC and reboot your device when prompted.

Connect your device with a usb cable and make sure activesync is green and ready with syncing. Unzip the files in a single directory on your PC and run "sspl.bat". Confirm each step by pressing enter and also check the display of your device.

If all goes well the display changes to the tricolor bootloader screen or it may turn grey, black or white. Disconnect and reconnect usb cable and wait 20 seconds. The activesync will disconnect. Unzip "HardSPL-Cavalier-1.0-JockyW.zip" and flash the HardSPL by running "ROMUpdateUtility.exe".

Rom cooking for Cavalier can now start.

Have fun!

After flashing the HardSPL, is it equal to SIM unlock??

[ibeqa]

After flashing the HardSPL, is it equal to SIM unlock??

No, not SIM unlock, but it's like CID unlock.

Cheers

[pralvarado]

so is there anyway to sim unlock this phone

[pralvarado]

well i did the sda unlock and also ran the sspa but when i go to run the updater it goes to 100% and and then says image file is currupt so am i doing tomething wrong here oh before i forget when i ran the sspa it didnt go to the bootloader and i did disconnect the cable for more than 20 seconds

[cruzzmz]

any cooked wm6.1 yet???

[kattach]

Guys a little help
can anyone help with sim unlocking the s630 before we go on to flashing it

thanks

[ibeqa]

Guys a little help
can anyone help with sim unlocking the s630 before we go on to flashing it

thanks

There's no free sim unlock

[ianken]

well i did the sda unlock and also ran the sspa but when i go to run the updater it goes to 100% and and then says image file is currupt so am i doing tomething wrong here oh before i forget when i ran the sspa it didnt go to the bootloader and i did disconnect the cable for more than 20 seconds


I am seing the same behavior.

IMHO this phone is basically abandonware. HTC shipped a quad band world phone but is offering essentially zero support or updates for it.

[ianken]

I am seing the same behavior.

IMHO this phone is basically abandonware. HTC shipped a quad band world phone but is offering essentially zero support or updates for it.

Well, using the jumpspl I was able to get the WWE rom to at least try to install. Then it hangs with an "update error" code 262 and quasi-bricks the device. Running the RUU for the hardspl un-blocks it.

At this time all I've managed to do is replace the HTC boot logo with the dopod boot logo.

Edit: success. Key to success: RTFM and a bit of reading between the lines.

1- Run the jumpSPL batch file. Make sure the screen on the phone has not blanked. Watch it. When asked if it is OK to run the jumpspl, say yes. Then observe at the bottom of the display what appears to be the top of a button on the warning screen: click the center d-pad button for OK.

2- Now you should see the rainbow colored rom loader and text on the screen indicateing it is the "jump" variant. Look at the bottom of the display do you see the text "USB"? If not unplug and re-plug the usb cable. The text "USB" should show up now.

3- Run the hardspl RUU package. It should work now.

4- After a reboot of the device and what not you can now flash the latest WWE build from the FTP server or whatever cooked bit syou migth be trying.

[hoian]

:( I run the RUU updater step to step and see this error, what problem
http://img165.imageshack.us/img165/7103/errorit3.jpg

[kattach]

so how do i get it sim unlocked?

[ianken]

The funny thing about this tool is this: once you're unlocked you have only one ROM to load on it and in my case it was actually older and less fucntional that what was running out of the box, at least that was the case for me.

This phone is abandonware, it is obvious that HTC has no intention of supporting it in anyway. If you manage to get a "cooked" rom running then great, but as for official update? Forget it.

Got me a Juno/Shadow to tide me over until an apealing 3G phone comes along for TMO.

[gohfastur]

This worked great for me! Thanks. I now need the password to the softbank access point. Anyone?

Also - I have tried this on other friend's Softbank X02HT and the rom loader gives me "VENDER ID ERROR"....

Any advice?

Thanks, again!

[ipratik]

hi,
i am also looking for the exact way to use other simcards on x02ht?i mean sim unlock it. somebody please shed the light on this issue..
thanks

[big ach]

So I ran Jump SPL and Hard SPL successfully on my Sim Locked HTC S630 (Locked to Vodafone Egypt) and whats weird it reformatted my phone (erasing contacts etc) but for some reason now, all the internal vodafone branding is now completely gone, no Vodafone splash screen at rebooting, no vodafone backgrounds at the dialer pad, no option to even choose a vodafone homescreen, the phone is working totally fine and normal though, So I decided why not check if it is still sim locked, and I put a foreign sim in and yup it is sim locked. I even tried to put in the code that I had gotten from mobileunlocked.com and it still says it was invalid!! GRRR

But anyone experienced this? if you had carrier branding on it and having it all totally gone after you flash hardspl?

[big ach]

I did a hard reset, do I need to reflash HardSPL?

[cruzzmz]

Ppls pls understand that SIM UNLOCK & HARD SPL are 2 diff things.

SIM UNLOCK is NOT = to HARD SPL

1. Sim Unlock = letting u use other carrier / celco sims on ur phone

2. Hard SPL = letting u flash non official / cooked rom on ur phone

cheers

[big ach]

Ppls pls understand that SIM UNLOCK & HARD SPL are 2 diff things.

SIM UNLOCK is NOT = to HARD SPL

1. Sim Unlock = letting u use other carrier / celco sims on ur phone

2. Hard SPL = letting u flash non official / cooked rom on ur phone

cheers

With the hopes of flashing a new rom and have it unlock the phone only to find out that even after you flash a new rom it is still locked. lol


I had flashed hardSPL then later on I did a hard reset, do I need to reflash HardSPL?

[umlet]

After installing WM6.1 I get a SimLock on my HTC cavalier (S630). Does anyone know how to solve this error or what code should be used ?

[discosrule]

:( I run the RUU updater step to step and see this error, what problem
http://img165.imageshack.us/img165/7103/errorit3.jpg

I get the same problem, what do i do next ? please.... :)

[cruzzmz]

With the hopes of flashing a new rom and have it unlock the phone only to find out that even after you flash a new rom it is still locked. lol


I had flashed hardSPL then later on I did a hard reset, do I need to reflash HardSPL?

Nope it will stay


After installing WM6.1 I get a SimLock on my HTC cavalier (S630). Does anyone know how to solve this error or what code should be used ?


buy the unlock code ... THERE IS NO FREE SIM UNLOCK yet

I get the same problem, what do i do next ? please.... :)
ERROR 270 meaning that u didnt do the HardSPL properly ... DO IT AGAIN

[AL613]

Thanks for the help...I didn't Hard SPL correctly...Great ROM... kinda makes me want to use the Dopod again...

I tried to install the correct T9 twice but I still can't get the letter "a" to work.

Any Ideas?? I rebooted right after running the .cab file...did I do something wrong?

Thanks again for your hard work...I installed the full 6.1 by the way. Would installing the custom 6.1 help with t9?

[harismic]

I'm having issues,

I keep getting error 270 file is corrupt. I have tried redownloading them a number of times but no luck.

I can't get mtty to work either to see if it is unlocked.

[Aroundafur]

heya.

anyone has this ROM file?

>< err. no heb.

:(

[qilixiang]

When I try to

1- Run the jumpSPL batch file. Make sure the screen on the phone has not blanked. Watch it. When asked if it is OK to run the jumpspl, say yes. Then observe at the bottom of the display what appears to be the top of a button on the warning screen: click the center d-pad button for OK.


it doesn't let me, basically the screen just freezes when I try to press the center d-pad. Please someone help, I am trying to get all of this working asap.

[xerex999]

i tried the hard spl but like most of the people here has an error 270 my phone is htc x02ht softbank , the problem is jumpssl doesnt force the unit into bootmode like the other people in the forum ive tried everything still cant find a solution

[ctc_sofie]

hey.im still a newbie here, how exactly am i going to install hard SPL? it says you need to do it before installing the 6.1 ROM. i downloaded it but it seems that there are a lot of files on the zip folder?should i install all of it?

help..

[Totalelectronics]

Will this Flash also work on the ASIAN models? I have one that is on China network that I need to unlock. But it wont accet codes that I got. So I understand that I need to flash to english ROM before I can enter codes. However it is not know if this is possible

[Totalelectronics]

Will this Flash also work on the ASIAN models? I have one that is on China network that I need to unlock. But it wont accet codes that I got. So I understand that I need to flash to english ROM before I can enter codes. However it is not know if this is possible

I cant flash this x02ht softbank from JAPAN. I follow all steps at the beginning of forum. I get onl errors. Can anyone confirm for me if the x02ht softbank from JAPAN can be flashed/unlocked?

[pilat]

Ppls pls understand that SIM UNLOCK & HARD SPL are 2 diff things.

SIM UNLOCK is NOT = to HARD SPL

1. Sim Unlock = letting u use other carrier / celco sims on ur phone

2. Hard SPL = letting u flash non official / cooked rom on ur phone

cheers

Good to hear that before trying HARD SPL. I'd like to confirm one thing, that is still not clear to me: is there a way to use the phone in PDA mode without any SIM?

Currently it's not only locked for other SIMs, but it shows "SIM Lock" even when there is no SIM..

[princeco1]

i have SoftBank X02HT(HTC Cavalier is in chinese language, how can change it to english language pls help me. thanks in advance

[Hakim Rahman]

i have SoftBank X02HT(HTC Cavalier is in chinese language, how can change it to english language pls help me. thanks in advance


you should flash with another rom the rom the WWE (World Wide Home) you can get in ftp://ftp.xda-developers.com/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/
read carefully before you do it

[THE ANT]

its ask login detail how to do that plz

[Hakim Rahman]

its ask login detail how to do that plz

to more easily you download it from here (http://www.ziddu.com/download/14244821/RUU_Cavalier_DOPODASIA_WWE_1.16.707.5_1.43.50.00_1 08_Ship.rar.html) without having login

[THE ANT]

tnkxx hakim, now how to flash this plz what i need this...

br
sanju..

[Hakim Rahman]

tnkxx hakim, now how to flash this plz what i need this...

br
sanju..

follow [TUT] Unbricking your Cavalier by ookba at http://forum.xda-developers.com/showthread.php?t=540478

[THE ANT]

Please find attached a SSPL (also known as JumpSPL) for Cavalier. Running it will allow you to flash a HardSPL. The HardSPL is a SPL (bootloader) which can not be overwritten and which allows you to flash roms (both official and cooked roms) and rom parts (radio, OS, splash, etc). If you want to replace the HardSPL you must run the SSPL again and then flash another SPL.

Make sure your device is application unlocked. If not, run the attached SDA unlocker on your PC and reboot your device when prompted.

Connect your device with a usb cable and make sure activesync is green and ready with syncing. Unzip the files in a single directory on your PC and run "sspl.bat". Confirm each step by pressing enter and also check the display of your device.

If all goes well the display changes to the tricolor bootloader screen or it may turn grey, black or white. Disconnect and reconnect usb cable and wait 20 seconds. The activesync will disconnect. Unzip "HardSPL-Cavalier-1.0-JockyW.zip" and flash the HardSPL by running "ROMUpdateUtility.exe".

Rom cooking for Cavalier can now start.

Have fun!

after this i face tihs problem look in pic


2- i have this rom -RUU_Cavalier_DOPODASIA_WWE_1.16.707.7_1.43.50.00_1 08_Ship
when i update this rom i m faceing this error- (error-294) invalid vandor id

note- my phone is htc x02ht

plz need urgent ..

[THE ANT]

any expert help me about this issue plz....
its very urgent...

br
sanju...

[raskal]

is any one interested in s-off for this phone? if so, tell me please in which countries this phone most popular.

thanks

[THE ANT]

u have solutio n of my phone htc x02ht

br
sanju..