The_Duke
11-06-2008, 01:25 AM
Please, please, please help me...
I've got a real challenge for all techies.
TYTN II original DUTCH rom (Hacked: No, Simlock: Free).
The problem started:
After a softreset it went straight into the 4 color bootscreen.
(the softreset was given after software update, so there was NO crash or some other errors).
This forum is full of solutions for failed rom updates that result in bootscreen boots, but i tryed them all, but NONE WORKED! <sniffer>
My bootscreen problem started as result of a softreset and not a result of some sort of update.
In MTTY i can connect and tryed several options as described in these forums.
Command: set 14 0 (tryed, no result)
Command: set 16 0 (tryed, no result)
Command: boot (command error!)
Command: task 8 (device resets and returns to 4 color boot).
Command: task 28 (some sort of format happens, but no effect).
Command: task 0 (no effect).
"boot" command allway's gives error, also when issiued as first command (read it somewhere this could help).
The "boot" command just is not available in my tytn ii version.
Offcourse i followed all suggestions to the letter (remove battery, reset, remove SD card, etc, etc. I realy did all the right steps exactly according to the solutions posted here).
But whatever i try it keeps booting in 4 color screen ?!
And to make things worse...
Command "boot" does NOT work (command error!). So i can not get past the bootscreen by using MTTY commands.
Only one way to get it booting to OS:
Remove battery for > 4 hours... then it boots into OS.
After booting into OS:
- Soft reset.. returns to 4 color boot.
- Hard reset.. returns to 4 color boot.
After i tryed all forum tips i desided to install the official HTC WM6.1 update (dutch).
Result ROM update: succesful 6.1 update installed from SDcard.
- But... Still booting in 4 color bootscreen. <aaarghhh>.
My 5 cents:
I believe the device has another bootflag set to 1 that needs to be reset (so another flag then the 14 or 16 option).
Status:
Now I have a succesfull rom update (HTC 6.1 dutch).
I do NOT have the RUU.. text in top of screen.
The device goes into bootscreen and can only get past it by removing the battery for >4 hours.
When booting i see a short 1/2 second screen stating:
Loading.... "No image File !!!"
Then it returns to the 4 color bootscreen.
On bootscreen:
KAIS130
SPL-3.29.0000
CPLD-8
I Hope someone can find the correct command to boot past the 4 colored screen, and even better; find the command that will reset the flag so it will boot normally allways in the future.
Thx all for all the help so far.
I've got a real challenge for all techies.
TYTN II original DUTCH rom (Hacked: No, Simlock: Free).
The problem started:
After a softreset it went straight into the 4 color bootscreen.
(the softreset was given after software update, so there was NO crash or some other errors).
This forum is full of solutions for failed rom updates that result in bootscreen boots, but i tryed them all, but NONE WORKED! <sniffer>
My bootscreen problem started as result of a softreset and not a result of some sort of update.
In MTTY i can connect and tryed several options as described in these forums.
Command: set 14 0 (tryed, no result)
Command: set 16 0 (tryed, no result)
Command: boot (command error!)
Command: task 8 (device resets and returns to 4 color boot).
Command: task 28 (some sort of format happens, but no effect).
Command: task 0 (no effect).
"boot" command allway's gives error, also when issiued as first command (read it somewhere this could help).
The "boot" command just is not available in my tytn ii version.
Offcourse i followed all suggestions to the letter (remove battery, reset, remove SD card, etc, etc. I realy did all the right steps exactly according to the solutions posted here).
But whatever i try it keeps booting in 4 color screen ?!
And to make things worse...
Command "boot" does NOT work (command error!). So i can not get past the bootscreen by using MTTY commands.
Only one way to get it booting to OS:
Remove battery for > 4 hours... then it boots into OS.
After booting into OS:
- Soft reset.. returns to 4 color boot.
- Hard reset.. returns to 4 color boot.
After i tryed all forum tips i desided to install the official HTC WM6.1 update (dutch).
Result ROM update: succesful 6.1 update installed from SDcard.
- But... Still booting in 4 color bootscreen. <aaarghhh>.
My 5 cents:
I believe the device has another bootflag set to 1 that needs to be reset (so another flag then the 14 or 16 option).
Status:
Now I have a succesfull rom update (HTC 6.1 dutch).
I do NOT have the RUU.. text in top of screen.
The device goes into bootscreen and can only get past it by removing the battery for >4 hours.
When booting i see a short 1/2 second screen stating:
Loading.... "No image File !!!"
Then it returns to the 4 color bootscreen.
On bootscreen:
KAIS130
SPL-3.29.0000
CPLD-8
I Hope someone can find the correct command to boot past the 4 colored screen, and even better; find the command that will reset the flag so it will boot normally allways in the future.
Thx all for all the help so far.