Rom upgrade interrupt - error

[ufoss]

On upgrade process %15 gived error...
Now I have 3 color screen..

Niki200
Spl-1.12.0000
CPLD-4
- Hard reset soft reset not working
- After Resume... I try to install ROM it gives me error
error [294]- invalid vender id

- I tested with alot of rom... No solutions. :mad:

I tried also
sspl-1.16-nike.zip (102.0 KB, 5148 views)
uspl-1.16-nike.zip (96.8 KB, 2741 views)
Splash.zip (4.9 KB, 1966 views)
flash-splash-niki.zip (627.9 KB, 2805 views)
flash-uspl-niki.zip (719.7 KB, 3921 views)
hardspl-1.16-nike.zip (96.8 KB, 3037 views)
flash-hardspl-niki.zip (719.8 KB, 3933 views)
hardspl-1.15mfg-nike.zip (101.1 KB, 2981 views)

No solutions:mad: What can i do..
Thanks for answer

[NetrunnerAT]

You havent read the threads carefully!!!

You need read and make it step by step!

Now your device stay in the bootloader mode. You need to start your OS then you can flash HardSPL again!

You need MTTY and use the command "boot" more details you can found here in this forum! Please search ... its easy to find! Its a little learning session.

[ufoss]

thanks...
Today i read forums almost 3 hours.
I was also busy with MTTY

Now i have usb connect problem but i will solve...
I will read mtty procedure again...

[NetrunnerAT]

OK ... here the answer ... have you DL MTTY?

Start it ... disconnect your Activ Sync via USB ... it blocks the MTTY connection ... type "?" in MTTY ... if you get a command list ... type "boot"

this was it!!!

to install hardspl

copy sspl directly to your phon ... no on the SD Card or what else ... better you remove sim and sd card!

start sspl

start hardspl ruu flash tool

finish

you havent start sspl correctly ... this is why you stuck in bootloader mode ... its a error if when you dont read the menual correctly!!!

this is a user error ONLY!!!

[ufoss]

thanks for help..
i used mtty
and command boot
tehn phone flashed.. for first opening...
then installed somethink and resetted itself..
i used one more time mtty boot...
i installed sspl...
then i upgrade phone...

Thanks for helppp