My ATT Tilt stuck in Tri-Color

[iseedeadpeople]

here is the info on the screen itself

KAIS1*0
SPL-1.56.0000
CPLD-8

on the top right corner "RUUNBH"

I tried unlocking it using POF's simunlocker then i get stocked here

MTTY doesnt even see USB
MY PC sees it though but not activesync

what i've done to resolved

1. search for answer google and here.. no dice
2. leave the battery for .03 and 1 day respectively.. no dice
3. reset it.. no dice

need help badly...

[digi0123]

do a search for stuck in boot loader

[fitdocsr]

Take a look at this pof post... perhaps helps you...

http://forum.xda-developers.com/show...03&postcount=1 (http://forum.xda-developers.com/showpost.php?p=1562803&postcount=1)

[iseedeadpeople]

do a search for stuck in boot loader

it is on my #1 as you can see.. thanks..:)

[iseedeadpeople]

Take a look at this pof post... perhaps helps you...

http://forum.xda-developers.com/show...03&postcount=1 (http://forum.xda-developers.com/showpost.php?p=1562803&postcount=1)

hey genius thanks!! got it to work!!! :):):)

[thesire]

it is on my #1 as you can see.. thanks..:)

if mtty doesn't see ur phone than i suggest u send a nice and polite pm to gsleon3 and solicite his help.

[iseedeadpeople]

if mtty doesn't see ur phone than i suggest u send a nice and polite pm to gsleon3 and solicite his help.

thanks!! I did unlocked my old phone before 8525 in here but now it seems that the kaiser is much more difficult..

where is the step-by-step wiki to unlock my phone?thanks...

[iseedeadpeople]

ok now i got my device to reboot...

but now if i turn-off or reset my device, I have to use mtty and use the boot command to turn it up again because it goes back to tri-color screen.. Thanks...

also it wouldnt sync anymore...

[iseedeadpeople]

update:

now it wouldnt even do a reboot in mtty it just shows white screen and then randomly display the tri-color every 2 mins.

[JimmyMcGee]

update:

now it wouldnt even do a reboot in mtty it just shows white screen and then randomly display the tri-color every 2 mins.

Buddy, I'm saying this because In all honesty I'm a nice person. You are going to get on people nerves if you don't start Searching More and Longer and/or posting you question in the already relevant thread.

For example, if you are trying to Unlock Post in the Kaiser Unlocker Thread. If you are stuck in boot loader, post in the Stuck in bootloader thread. It's just a common courtesy thing we have going on around here.

[XtreMe_G]

+1 to what jimmy said and i strongly advise you to stop playing with mtty and contact gsleon3

[thomassster]

first off, the big no no which you tried to do some type of flashing without HardSPL. You first gotta jumpspl and then hardspl. If that doesn't work, then welcome to the newbs bootloader club and i sense a pm to gsleon3 will be coming very soon.

[GSLEON3]

LOL, The more stubborn they are, the harder the fix can be. Stop screwing around & contact GSLEON3, LOL.

[iseedeadpeople]

ok i will post there now...

just quick it is up again back to the normal screen, now how do i resolved this?Thanks.. what diagnostic tests or repairs i should do??

[iseedeadpeople]

LOL, The more stubborn they are, the harder the fix can be. Stop screwing around & contact GSLEON3, LOL.

you got pm

here is my info 8 result

info 8

--- 2K bytes sector version ---

DEVICE NAME=hynix_hyh0ssj0mf3p
DEVICE ID=0xBA
DEVICE MAKER ID=0xAD
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 20 (0x14) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x9E40
Partition[3], type=0x4, start=0xAB80, total=0x10740

CE Total Length(with sector info) = 0x5615C00
CE CheckSum Length(without sector info) = 0x55C0000

thanks..

[gman8966]

I just had a very weird thing. Not sure if this has happened before. My phone has never had any problems. I use SPB mobile shell and was just installing a new theme. Like usual I restarted the phone after copying the files and the tri-color screen came up. I soft-reset the phone a number of times and the tri-color screen still came up every time. Took out the battery let it sit for a minute and started up, again the tri-color screen appeared. Finally I figured I would plug it in to my wall charger. It changed from serial to USB, so I soft reset it and it booted up fine.

This is very odd. Just wanted to give my input. I'm sure this has happened before but I don't remember reading about it.

*EDIT: OK I'm still having the problem. WHen I try to restart my phone, it goes to the tri-color screen. I have SPL 3.29 installed. When I'm on the tri-color screen, it says I have 3.29. Why is it doing this to me. To get it to boot, I have to remove battery, put battery back in, plug it into wall charger, and then turn on phone. THis is the only way I have found to fix it. Anyone???