[REF] P3600i ROM Collection (Updated: 26 July)

[mac_es]

Excellent , this rom (official BETA) is really for your phone guys , have dump and extraxt xip , the nk.exe is new (2009) , i'm working on .
Difference btw my rom is Pagepool on 6 MB and mine 4 MB , i use realbigstorage , may be I don't support this ; how many MB free memory after flash a wm 6.5 full rom ?


Sure it is from 2009? It says that is has been compiled on 22 July 2007...

[chanvi93]

Sure it is from 2009? It says that is has been compiled on 22 July 2007...

I aldeady used july 2007 nk.exe from wm 6.0 update asia in WM 6.5 ROM and my rom crash only 2 days using with not I or I device .
Also all my maps ID with 2007 nk (Rev3) aren't recognize with this nk .

[Andych]

Hello all
Thank to report , all not I users are waiting your test .
It's sure that some interfaces are not compatible with wm 6.5 . If a hard reset can to be made proprely it's well.
Have you installed BTFix cab in 1rst post ?

Hi Chanvi
An update for you on the new Rom.....all seems well, no hard resets or crashes since it was flashed. It appears to be a bit heavier on battery than earlier Roms but that is manageable.
Memory seems to leak away, on a fresh boot we have 23 meg free and then it starts to drop without using the phone, it seems to stabilise around 17 megs which again is manageable but slows responses down a little. I have the BT fix loaded and also Nikisimfix. The other thing I have noticed is I have set the left soft key for Contacts and it is fine, so long as I don't turn the phone off. When it reboots it defaults back to the original setting and I need to change it again.

I guess it is a beta Rom so we hae to expect a few bugs.....overall...I am pretty happy with it, or I should say my other half is happy with it as she uses it on a daily basis.

[tallPete]

An update from me - its stable, I've been running for 4 days now, no hard resets. Previous version lasted only 1 day so good. Memory does slowly leak like Andych says. I managed to crash it while trying to lock my phone, I don't think this is the fault of the ROM. I've reset the soft keys too, but they stick on a power cycle. The boot screen says WM6.1!!! I'm running a WM6 theme which is interesting.. the whole phone goes back to WM6 look and feel pretty much...

[chanvi93]

The other thing I have noticed is I have set the left soft key for Contacts and it is fine, so long as I don't turn the phone off. When it reboots it defaults back to the original setting and I need to change it again.


In WM 6.5 Rom we can change CHome softkey by registry only , i had created a threat for this : http://forum.xda-developers.com/showthread.php?t=501300
Next week , a release from official build 21501 for not I and I of course .

[robinbb]

CV93 version 21500 running very well for me. I have had some issies with vehicle handsfree Bluetooth connections, but it may be 'finger problems'.
I run with MSVC, TomTom, OziExplorer, Modaco NoData.
Missing photo-contact dialling, I tried Pointui but that led to all sorts of problems. Removed it.
I then tried adding Manila 2D scheme on SPB Mobile Shell 2.15
http://forum.xda-developers.com/showthread.php?t=402021
- running great guns!

Drat - sorry, spoke too soon! My P3600i has gone troppo, with a series of crahes and hard resets. Now the hard reset wont work (starts OK but then results in a blank white screen). I have tried a reflash and then restore, but that only lasted for a few hours. Now trying a reflash and then adding nothing at all in order to test the raw ROM.

[kane81]

In WM6.5 rom - how are we suppose to access contacts... I couldnt find a link to it....

[kane81]

The WM 6.5 just crashed on me after 4 day ... :(

Guess that means the only stable rom for the trinity is WM6 :/

[robinbb]

The WM 6.5 just crashed on me after 4 day ... :(

Guess that means the only stable rom for the trinity is WM6 :/

Sad isn't it!
I have moved to FInix3.7.2Normal as that has been OK so far

[BumAround]

been running for 5 days now, so far it's stable (no crash, once soft reset, fingers crossed).

but the memory leak, as well as the battery leak (yes, drains faster) DOES happen. This is as compared to Schap's 4.30 that's based on WM6. I believe this is inherent to WM6.5 (i.e. mem & batt leak), not the ROM itself...

[Andych]

Well 10 days now and still running fine, apart from the memory leaks and battery drain. Both are manageable so all is good from this end.

[the.decoy]

Well 10 days now and still running fine, apart from the memory leaks and battery drain. Both are manageable so all is good from this end.

Yeah, when I finally just gave up on CHome (and M2D) it became stable enough to go the last week completely crash free. All that animated today screen scrolling (CHome and M2D) seems to be thing that kills mine most often.

I am trialing SPB shell but not much of that runs on the today screen so it is effectively dormant most of the time. For what I am using it for I think I might just put trusty old "HTC Home Plugin" on there (photo contacts, weather and app launcher).

The memory leak is the biggest problem ... I am running Hibernate every single time I finish running an app or reading messages. Once it starts it get to about 70% used (at idle), I do a soft reset to get back the leaked mem.

It does appear to freeze often when you put it into lock mode but if you just wait a second, then use the screen-off button it will indeed be on the Lock screen went you turn it back on again.

Oh and yeah, the whole "Unknown caller" ID on the lock screen thing too ... only about 5% of my call IDs are recognised by that. It is fine once you answer the call but I guess that kinda defeats the purpose a little :p

[tallPete]

Still goin strong, I expect the beta will probably expire before it self destructs or I remove it - very stable!

[chanvi93]

Still goin strong, I expect the beta will probably expire before it self destructs or I remove it - very stable!

Hello
21500 hasn't timebomb , you can use it forever .
I'm missing just time to update to 21501 for you and i hesitate to make with NetCF 3.5 also , it's better in general but may be too new and your device is very special .

[chanvi93]

Update 21501.5.0.70
Finaly i have made with NetCF 3.5 , 4 versions : 2 IE6 and 2 IE8 ( dont' forget to install 21501_IE8_Reg.cab from PostInstall if you want use Widgets )
Read carefuly the 1 rst post of my threat :

Links : http://www.4shared.com/dir/14851497/6c33d852/21501_P3600_I.html

Ok all 4 files on 4Shared
Enjoy

[tallPete]

Well, my install gave up last night, it locked up and when restarted booted to a white screen. No amount of battery removal and resetting would recover it.

I've decided to go back to my HTC standard stable WM6 ROM. The only thing I will miss about the newer ROMs is threaded texting and the new font set/graphics. Is there a threaded texting that can be installed as a cab - I'd pay for third party product?

All credit to you though Chanvi, your cooking is excellent.

Cheers.

[chanvi93]

So it not boot after installed 21501 Rom ?
Can other confirm ? Problem is i haven't device to test after cook it directly for P3600 I .
Also a mui file is missing for gam Bubble Breaker and i have added in DL link .

[tallPete]

Hi,
I didn't try 21501, my crash was after a couple of weeks of running the previous version. I'm sure your release is just fine!

Cheers.

[Maverick_Chan]

Try to use Team CV93+Oggi (17.01.2009), everything look good, but the GPS not able to locate where I'm... it does able to receive signal but not like the original ROM.. I check the GPS status, it can found 3 to 4 seatelles only... and Mapking or the build in tool not able to locate my location

[hopednothing]

Hi,i had try 21501 on by P3600i,it's fine great job!:D

[chanvi93]

Hi,i had try 21501 on by P3600i,it's fine great job!:D

Welcome in xda-developpers and thanks
3 days and only 1 report ? I'm anxious to know if all versions are ok in flashing etc....

[kane81]

FInix3.7.2 just died after 8 days :(

[Andych]

Welcome in xda-developpers and thanks
3 days and only 1 report ? I'm anxious to know if all versions are ok in flashing etc....

HI Chanvi
Sorry, I haven't had a chance to flash it ot my wifes P3600i just yet. As soon as I am able to get it away from her I will flash it and give you some feedback.
How is it working in the P3600 (Trinity)? Any issues? Hopefully the memory leaks will be better.

[Bine]

Hello everyone.
I´m new over here and i have a HTC P3600 too.
I`ve upgraded the ROM to W 6.1 professional, but it`s in Italian, and i´m portuguese.
So i cant change the language (i don´t know how to do it), and i´ have tried to cook my own rom, but i´m a big disaster in this fields.
I´m asking you if you can help me to upgrade my rom (can be one of your´s coked room, in ENG, or PTG), and say how to do the rest.

Sorry for my bad english.

Thanks

Bine

[Entalion]

Hi,
i've a problem with this roms... when i try to flash, it remains on "0%" for many minute and then tell me that the rom must be corrupted...and i've tried to download many of this rom...all of that tell me "corrupted"...any help?

Thanks,

Eym

[Andych]

Hi,
i've a problem with this roms... when i try to flash, it remains on "0%" for many minute and then tell me that the rom must be corrupted...and i've tried to download many of this rom...all of that tell me "corrupted"...any help?

Thanks,

Eym

Which ROM? What model phone? It sounds to me like you are trying to use the Chanvi's 6.5 ROM on a P3600, the ROM seen in this thread is for the P3600i. PLease give us more information to be able to help you.

[pcorin]

Hi All,
This is my first post, so just want to thank everyone for their work in this community, it's an amazing resource.

I have a 3600i and am pretty keen to try out the new UI in 6.5. Given HTC never released an official 6.1, it's pretty much a done deal that they won't release 6.5.

I'm pretty risk averse though, so want to go to a fully stable, well performing ROM. From reading through, it seems like the ROM based on the BETA version isn't really there yet (the first post in this thread talks about poor performance). However the official release of 6.5 is coming up soon. So my question is, how quickly do you guys expect to see stable ROMs based on the official release here?

Secondly, is it worth me waiting or should I just go to the latest version of the beta build (after all, the feedback sounds pretty good).

Thanks.

[robinbb]

Hi All,
This is my first post, so just want to thank everyone for their work in this community, it's an amazing resource.
I have a 3600i and am pretty keen to try out the new UI in 6.5. Given HTC never released an official 6.1, it's pretty much a done deal that they won't release 6.5.
I'm pretty risk averse though, so want to go to a fully stable, well performing ROM. From reading through, it seems like the ROM based on the BETA version isn't really there yet (the first post in this thread talks about poor performance). However the official release of 6.5 is coming up soon. So my question is, how quickly do you guys expect to see stable ROMs based on the official release here?
Secondly, is it worth me waiting or should I just go to the latest version of the beta build (after all, the feedback sounds pretty good).
Thanks.

Interesting thoughts. I do agree that there appear to have been some stability problems, but I have a niggling feeling that they may also be linked to ROM flashing procedures. The Diamond guys are using the pre-flash cleanup procedure that I have listed below - but I have not been able to determine whether the same would apply to the P3600i. Someone else may be able to advise on this.
Another interesting point is that SPB Mobile Shell v3 is looking very promising - thus maybe we only need an updated 'raw guts' without the sexy interface.

Procedure:
1. Remove SD card? Said to have no impact but may be safer!
2. Bring the device to bootloader
3. Launch ActiveSync on PC
4. Go to connection settings and uncheck the Allow USB Connection
5. Run mtty1_1_.42_538 on PC
6. Press Enter key: CMD appears on screen. Type ‘task 29’ and press Enter (formats the storage and IMGFS)
8. Flash the ROM of your choice
Voila!!! the device is back to stable condition

[Entalion]

Which ROM? What model phone? It sounds to me like you are trying to use the Chanvi's 6.5 ROM on a P3600, the ROM seen in this thread is for the P3600i. PLease give us more information to be able to help you.

Hi!, thanks for the answer...how i understand what model is in my hand? i believe it is a p3600, but maybe it could be a p3600i... how i can check the difference?

thank you

[kane81]

^^^

I have tried almost all the roms (currently trying 21501 - on day 1) and the only one that is stable (was fine for months - only flashed cause I wanted to try the later stuff) is Shaps WM6 rom.

Basically, there seems to be a "bug" for P3600i users in roms > 6.0 - it has to do with the core file system driver... basically one day the system files become corrupt. Usally within a week or two.

[kane81]

see this thread on the file system bug which I dont have the skills to try and fix....

http://forum.xda-developers.com/showthread.php?t=461219

[Andych]

Hi!, thanks for the answer...how i understand what model is in my hand? i believe it is a p3600, but maybe it could be a p3600i... how i can check the difference?

thank you

Read the Wiki...it will give you all the details there.

[robinbb]

Hi!, thanks for the answer...how i understand what model is in my hand? i believe it is a p3600, but maybe it could be a p3600i... how i can check the difference?

thank you

Slide off back. Remove battery. Read the label!

[Andych]

Interesting thoughts. I do agree that there appear to have been some stability problems, but I have a niggling feeling that they may also be linked to ROM flashing procedures. The Diamond guys are using the pre-flash cleanup procedure that I have listed below - but I have not been able to determine whether the same would apply to the P3600i. Someone else may be able to advise on this.
Another interesting point is that SPB Mobile Shell v3 is looking very promising - thus maybe we only need an updated 'raw guts' without the sexy interface.

Procedure:
1. Remove SD card? Said to have no impact but may be safer!
2. Bring the device to bootloader
3. Launch ActiveSync on PC
4. Go to connection settings and uncheck the Allow USB Connection
5. Run mtty1_1_.42_538 on PC
6. Press Enter key: CMD appears on screen. Type ‘task 29’ and press Enter (formats the storage and IMGFS)
8. Flash the ROM of your choice
Voila!!! the device is back to stable condition

The only problem I can possibly see with doing this is it may screw up the Bootloader fix from Olipro.
I guess it depends on how much of the system is formatted.
As far as stability is concerned I am not having any problems so far with 21500. I will hopefully get the chance to flash the newer build this weekend and see how that goes.

[kane81]

21500 rom just died on me after 2-3 days :(

back to shaps 6.0 rom ....

[robinbb]

21500 rom just died on me after 2-3 days :(

back to shaps 6.0 rom ....

Ditto my FInix 3.72 20764 after a good period of excellent running. Gawd I wish that I knew what was causing these problems!

[Andych]

Ditto my FInix 3.72 20764 after a good period of excellent running. Gawd I wish that I knew what was causing these problems!

Still going strong here on 21500. It might be that the only things loaded on other than the ROM are nikisimfix, BT fix and icontact or whatever it is called.....I forget now. It shut down last friday but only because it ran out of battery. A full re-charge and it was back up and running fine.

[bbdai]

Dear Chanvi,
Thanks for all your hard work.

I have used a fair few 6.1 roms without much success and the new 6.5.
21500 stopped after 4 days for me (the longest run I have had with a cooked ROM so far), so I flashed the stable Schaps 6.0.

Today I had some time so I decided to try 21501.
I am using the IE6 lite version. It flashed fine and is running well with minimal programs installed. I'll install all the programs I usually use tomorrow and see how it goes. But so far pretty good and thought I should give some feedback since there isn't much for the new version. On soft reset I get about 22mb free, however I am runing touchresponse, a battery bar and autolock in the background. Otherwise its very similar to 21500 except it appears a little more polished as a version. Also, BT Fix doesn't seem to be needed for bluetooth to turn on properly after the install. I haven't tested pairing with any devices but it identifies other devices fine.

One minor point is that the Storage Card is called "Carte de Storage" (in French) on install. It stalled my SDConfig autorun. However, the name can be changed through the registry afterwards. Not a big deal.

[the.decoy]

Still going strong here on 21500. It might be that the only things loaded on other than the ROM are nikisimfix, BT fix and icontact or whatever it is called.....

Yeah, similar story here ... just hit 20 days on 21500_ie6 ... but the trick seems to be that I have given up on M2D and CHome to get that stability. I did have a trial install of SPB shell (v2?) on there until the trial period ended at 15 days, but frankly I wasn't thrilled with it so instead of buying it, I am back to good old HTC Home Plugin :)

Memory leak is the only major issue ... I have got Hibernate set as a Soft-Key and I just run it every time I am finished my tasks :D ... then when the "base" memory usage gets to about 70% I do a preemptive soft reset.

Kinda paranoid way to run the phone - I know - but it is the longest I have made a cooked rom go thus far so I am seeing just how long I can make it last. I am already itching to try 21501 but will hold out a little longer to see if it really is just these Today "shells" (CHome/M2D) that do the dreaded p3600i file corruption on me. :rolleyes:

[robinbb]

Yeah, similar story here ... just hit 20 days on 21500_ie6 ... but the trick seems to be that I have given up on M2D and CHome to get that stability. I did have a trial install of SPB shell (v2?) on there until the trial period ended at 15 days, but frankly I wasn't thrilled with it so instead of buying it, I am back to good old HTC Home Plugin :)

Memory leak is the only major issue ... I have got Hibernate set as a Soft-Key and I just run it every time I am finished my tasks :D ... then when the "base" memory usage gets to about 70% I do a preemptive soft reset.

Kinda paranoid way to run the phone - I know - but it is the longest I have made a cooked rom go thus far so I am seeing just how long I can make it last. I am already itching to try 21501 but will hold out a little longer to see if it really is just these Today "shells" (CHome/M2D) that do the dreaded p3600i file corruption on me. :rolleyes:
I wonder about two things:
* A regular run of cleanRAM
* A pre-install fix using mtty
Would appreciate your opinion.
I am on 3.72 lite at present + Mobile Shell v3 (LOVE it!). OK so far

[kane81]

^

I dont know why people dont believe me when I say it is the imgfs file....... *shakes head*

WM 6.1 imgfs.dll is 37kb
WM 6 imgfs.dll is 27kb

[the.decoy]

I wonder about two things:
* A regular run of cleanRAM


Isn't that basically what I am doing with Hibernate?


* A pre-install fix using mtty
Would appreciate your opinion.
I am on 3.72 lite at present + Mobile Shell v3 (LOVE it!). OK so far

I will investigate mtty when I next re-flash it ... although I have the same concerns about it messing with my bootloader (so far I have had a pretty smooth run with my Olipro SPL).

Cheers!

[robinbb]

Quote:
Originally Posted by robinbb View Post
I wonder about two things:
* A regular run of cleanRAM
Isn't that basically what I am doing with Hibernate?

Woopsie - sorry, I thought that it just put the thing to sleep.

[the.decoy]

Quote:
Originally Posted by robinbb View Post
I wonder about two things:
* A regular run of cleanRAM
Isn't that basically what I am doing with Hibernate?

Woopsie - sorry, I thought that it just put the thing to sleep.

haha yeah I was talking about the Oxios Hibernate app that frees up ram (just before I actually do put it to sleep).

[BumAround]

noob's question: whaat's mmty and what does it do (good to)?

[robinbb]

noob's question: whaat's mmty and what does it do (good to)?

mmty is a friend of Google's!

[cespo]

mmty is a friend of Google's!


very very funny.....

another friend is "search" on the right top of the page!

guys, read before posting!!!!!!!!

[Argyle0297]

^

I dont know why people dont believe me when I say it is the imgfs file....... *shakes head*

WM 6.1 imgfs.dll is 37kb
WM 6 imgfs.dll is 27kb

I have extracted 2 imgfs.dll and put them in cabs "JUST FOR U" :D

First one is from my device original rom which is CHT rom (chinese), the other is from original WWE dopod asia 3.00.707....

Please test them and report your findings.

Btw, I use finix 3.7.2i. The imgfs.dll is 36kb. Extracted ones are 29kb.

AS ALWAYS "DO IT AT YOUR OWN RISK" :D

[Argyle0297]

This morning I installed one of the imgfs.dll to my P3600i.

This afternoon at 3:00 pm I have to HR again :( .

This is NOT the solution for P3600i hang + HR problem.


Does anybody know how to revert back to the original SPL? Flashing the original WWE doesn't overwrite the Olipro HardSPL. SSPL for P3600 obviously doesn't work for P3600i (I've tried).

[Argyle0297]

.....................

[kane81]

I have extracted 2 imgfs.dll and put them in cabs "JUST FOR U" :D

First one is from my device original rom which is CHT rom (chinese), the other is from original WWE dopod asia 3.00.707....

Please test them and report your findings.

Btw, I use finix 3.7.2i. The imgfs.dll is 36kb. Extracted ones are 29kb.

AS ALWAYS "DO IT AT YOUR OWN RISK" :D

Hmmm...my understanding was that this was core boot file.... I dont think you can install it via a cab, only via flashing..... correct me if I'm wrong....but how do you swap out a file system driver, with a new one while writing it out.... ? to me it doesnt make sense....you have to update this file via flashing I would say or else it wont work....

[Argyle0297]

well from my point of view this is just like the generic BT fix, which overwrite system files cooked in the rom. U can do that to any files, but when making the cab u must select hardcoded option to /windows. after it installed it will ask u to restart the device by clicking ok. then the installed files will be executed when it boots up.

[Andych]

Well I am still running on 21500 and have had no Hard resets at all since the first flash......that would be....a while now. This is the longest of any cooked Roms with no problems.
Admittedly I no longer run Tomtom on the P3600i as we both have dedicated GPS units now so it really doesn't get too hard a life....but I am pretty happy with it.
I haven't flashed the newer Rom yet as I am running Windows 7 and I need to get around to setting up Vitual XP to see if I can install activesync there and flash through that. Win 7 doesn't like to play when trying to flash Roms.

[the.decoy]

Well I am still running on 21500 and have had no Hard resets at all since the first flash......that would be....a while now. This is the longest of any cooked Roms with no problems.


Alas, my long-lived 21500 finally locked up yesterday. Made it just past the 30 days make which was still impressive compared to my previous roms.

I have put 21501 (ie6 full) on there for now but I am currently trying to work out what needs replacing for the p3600i on Chanvi's Ervius Trinity Kitchen bundle so I can try cooking a 21231 or 21502 rom.

I have extracted the nk.exe from 21501 (for p3600i), just wondering if there is anything else that needs modification? As far as I can tell this is the only thing that Nosedive's mod_i batch script replaces.

[chanvi93]

Alas, my long-lived 21500 finally locked up yesterday. Made it just past the 30 days make which was still impressive compared to my previous roms.

I have put 21501 (ie6 full) on there for now but I am currently trying to work out what needs replacing for the p3600i on Chanvi's Ervius Trinity Kitchen bundle so I can try cooking a 21231 or 21502 rom.

I have extracted the nk.exe from 21501 (for p3600i), just wondering if there is anything else that needs modification? As far as I can tell this is the only thing that Nosedive's mod_i batch script replaces.

Hello guys
Just a little patience , when i have fixed all little problem in kitchen with wwe version , i will try to make a kitchen for you P 3600 I since your official wwe rom and 21500 official beta xip .
But you must make test with me because i haven't device .

[Andych]

Hello guys
Just a little patience , when i have fixed all little problem in kitchen with wwe version , i will try to make a kitchen for you P 3600 I since your official wwe rom and 21500 official beta xip .
But you must make test with me because i haven't device .

Hi Chanvi.....no problems testing here...I will be glad to do it.
I just flashed to 21501 tonight...all went well. I like the layout...it is a little more user friendly than 21500.

I didn't need to flash the new Rom...21500 was still going strong but I finally got the chance to do it so I figured I would.
I also tried to flash through Windows 7 and Virtual XP. I was able to connect the phone via activesync 4.5 but for some reason I kept getting an error when attempting to flash.
I will try again at some stage when I have played with Virtual XP a bit more.

[the.decoy]

Hello guys
Just a little patience , when i have fixed all little problem in kitchen with wwe version , i will try to make a kitchen for you P 3600 I since your official wwe rom and 21500 official beta xip .
But you must make test with me because i haven't device .

Sorry Chanvi, I wasn't trying to bug you about it (the whole reason I was trying to work it out myself was because I could see how busy you were).

However, if/when you did manage to do a kitchen for the i users, then I would also be very happy to help do the testing :)

Thanks!

[Argyle0297]

....... just wondering if there is anything else that needs modification? As far as I can tell this is the only thing that Nosedive's mod_i batch script replaces.

If you want I can post the imgfs.dll package from WM6 official rom.

Not sure it will work with WM6.5, hell i'm not even sure if it's working with WM6.1 :D . But after the initial try which lead me to a hard reset, I have installed it again.

Last night while I was trying BBConnect, my device hanged several times which usually lead to a hard reset when you press the soft-reset button. Well last night it booted up smoothly and went into windows. SEVERAL TIMES...... :eek:

I'm not really sure if it was the imgfs.dll that causes that, I will keep this thing in my device until my device locks up and HR again.

[the.decoy]

If you want I can post the imgfs.dll package from WM6 official rom.

Not sure it will work with WM6.5, hell i'm not even sure if it's working with WM6.1 :D . But after the initial try which lead me to a hard reset, I have installed it again.

Last night while I was trying BBConnect, my device hanged several times which usually lead to a hard reset when you press the soft-reset button. Well last night it booted up smoothly and went into windows. SEVERAL TIMES...... :eek:

I'm not really sure if it was the imgfs.dll that causes that, I will keep this thing in my device until my device locks up and HR again.

Thanks but I was actually just trying to find out what modifications Chanvi+Oggi and the other cookers were doing when porting their roms to the i

I have been loosely following your investigation of the imgfs.dll (as a potential culprit for the mysterious tendency of p3600i's to corrupt otherwise healthy roms) and whilst this is very interesting, I still need to work out what all the "standard" i mods are (eg: nk.exe) before I go experimenting with the imgfs.dll.

On this note, it looks like I will have to wait until Chanvi does us an Ervius/Bepe Kitchen bundle ported for the i as my current attempts to graft nk.exe into the Kitchen's OEMXIPKernel folder have been epic fail ("platformbuilder" program makes a fatally inaccurate memory read/write at the start of the rom compiling and the whole lot crashes). :o

I imagine that I need to do more than just put the nk.exe folder into place (rebuild os.nb.payload is it??) ... but I haven't had time yet to RTFM enough cooking guides to work it out. :rolleyes:

Thanks anyway.

[Argyle0297]

With imgfs.dll installed, my device locked up and HR just now :(

I inserted imgfs.dll to finix 372i using mod_i, flashed and running ok.

Now I just have to wait and see.

[robinbb]

Can anyone please post or provide a link to an ORIGINAL WWE ROM? I would like to flash one before my next upgrade, but cannot get access off the HTC site as wherever I try 'my serial is not suitable for this rom'. Thanks

[chanvi93]

Kitchen 4 P3600 i_21232

21232 QVGA WWE+FRA Kitchen for P3600 i TEST 1 (http://www.4shared.com/dir/14851497/6c33d852/KitchenROM_P3600_I.html)

I ported xip from the latest WWE DOPOD WM 6.1 for P 3600i , OEM is completely for your device , i deleted some old software and put in a folder " P3600i_RemovedFrom_OEM.rar" in the same DL folder .
Read here (http://forum.xda-developers.com/showthread.php?t=513421) before .
The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

[Andych]

Can anyone please post or provide a link to an ORIGINAL WWE ROM? I would like to flash one before my next upgrade, but cannot get access off the HTC site as wherever I try 'my serial is not suitable for this rom'. Thanks

It is on my 4shared virtual drive.
http://www.4shared.com/file/56157806/3d129ca/RUU_Trinity_DOPODASIA_WWE_30070718_6275_1463011_10 8_Ship.html

[robinbb]

It is on my 4shared virtual drive.
http://www.4shared.com/file/56157806/3d129ca/RUU_Trinity_DOPODASIA_WWE_30070718_6275_1463011_10 8_Ship.html
Thanks so much!

[the.decoy]

Kitchen 4 P3600 i_21232
...
I can't test it because have not device but i know it will boot without problem .

Many thanks Chanvi! :D

Successfully cooked, flashed and booted with the IE6_MAN recipe.

Only bug so far was the SDConfig autorun cabs were not installed ... might be one of the cabs I had ... will look into it further and report back.

[Andych]

The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

OK...after playing around for a couple of days getting comfortable I tried cooking my own ROM last night and this morning....So far I have flashed 4 different versions with varying degrees of success....
Each one flashed OK....so it is only a matter fo figuring out what I can remove or insert to achieve MY personalised version.
The Kitchen is easy to use...my biggest problem is figuring out what all the add-on packages do....some are self explanatory....others need more investigation.
The strange thing I found was I used the IE6TIT Rom and tried removing a few items...and while the Rom flashed OK I was left with 6 meg of Program Ram available...and I couldn't for the life of me figure out what was using it all....
Anyway...more investigation...more asking of questions in the Kitchen thread and hopefully I will understand more.

So come on the rest of you....have a go....at least this way you can customise to suit yourself...no more asking Chanvi "can we have an ultralite Rom" etc....Now you can.

[chanvi93]

Hello Andych
You have only 6 Mo of ram with 6IETIT or 6 MO more ?
Can you tell me how much ram and space ? This is the 1rst step of your kitchen and i hope only it will stable no scrach .
In EXT COMMON is for all version so some items (folders) are important like mxip_performance , don't remove it , others are tools with name .

[Andych]

Hello Andych
You have only 6 Mo of ram with 6IETIT or 6 MO more ?
Can you tell me how much ram and space ? This is the 1rst step of your kitchen and i hope only it will stable no scrach .
In EXT COMMON is for all version so some items (folders) are important like mxip_performance , don't remove it , others are tools with name .

Hi Chanvi
I think I know what I did to make my Ram so small....I played with the Rom tool on the bottom left and unticked the "Change 2m pagepool" box. ON the last one I went back and ticked it plus changed the 16meg to 3meg.
The Rom that is on the phone now is IE8 Full, I am pretty sure it had 23meg free after flash and configuration. My Wife uses the phone so she will certainly let me know if it isn't stable...lol.
I am going to read as much as I can tonight of the thread on the Kitchen...I haven't looked at the folders in the kitchen....all I have been doing is changing certain items to False in the actual Kitchen....a little better understanding and I think I too will not be sleeping as much.

[chanvi93]

OK i understand now , i recommend PagePool btw 3 and 6 .

[Andych]

OK i understand now , i recommend PagePool btw 3 and 6 .

I found that one out the hard way....lol.
I have flashed another one tonight....based on IE6FOOTIT with Pagepool at 4 mb.
In sys I removed Adobe Flash, Adobe Flash codecs, Entertainment, INternet sharing, Skybox, Skymarket, Windows Live, Windows Live IM, WM Live Search widget, WM Money Widget, WMWeather Widget and WM widgets.

In P3600i External I removed the Package_lolite items and
In Common External Packages I removed Package_Blackstone QuickGPS, Set-up Voip and Voip_WM6_FR.
Flashed up nicely although I notice the Flash screen is different from your previous ROMs....and interestingly the date comes up initially as 1/1/2007 where 21501 came up as 2009 (not that it makes any difference).

The only things I needed to do were to run NikiSimFix and then advance configuration to make the Sim card entries hidden.

BT turns on....I haven't tried to pair it yet so I will find that out over the next day or so.

After Flashing and Auto configurations + setting Sim fix and the preferred background the Memory figures are....Storage Total 191.2, in use 4.54, Free 181.65 and Program Total 50.92, in use 27.45, Free 23.47

I am pretty happy with that...we will see over the next week how it goes for Stability, although I didn't have any problem with 21500 or 21501.

NBH size is 48 meg.

I will continue to play around and see what works and what doesn't. I wanted to make sure there was no MD2 stuff in there and initially removed Bronze and Bronze EA as well as OX Manilla Compatible shared Dll plus Raccouris Manilla....it flashed OK but there was no Chrome main screen....so I added those in and I will use trial and error to arrive at a point that is to my liking.

Now all we need to do is get a few otheres using it...and I need to read up on how to include NikiSimFix into the package....
Any hints....lol


I also upgraded my Radio Rom to 1.56 hoping it helps with Battery life....

[opires]

I have a P3600.
ROM is: 1.23.410.2
date rom: 03/13/07
radio 1.38.00.11
(Portuguese version)

I want to update the HTC, but I don not know what ROM I have to peek and install.
I readed many thinks in this forum. (I agread, I don't understant great part of this)

There are any one who teach me on this

many thanks

Opires:confused:

[Shedzer]

Hey Chanvi, I saw a new kitchen build 21725 in your virtual drive. Eager to try out now before I run out of time and back to my project. :(

Anyway, thanks for your effort. Really appreciate that.

[chanvi93]

Hey Chanvi, I saw a new kitchen build 21725 in your virtual drive. Eager to try out now before I run out of time and back to my project. :(

Anyway, thanks for your effort. Really appreciate that.

Hi sorry , after Uploade file i constate a problem with this new uild for our device , i have deleted and uploade later
The problem is in SYS-21725-SHARED-COMMON-OS , the .rgu file , at the end (the latest line) remove this command :
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Touch\Filter]
"MinimumTapTime"=dword:28

This command is for Touch device , it's not the case for our device .
Regards

EDIT : You an open .rgu file with NotePad , or delete this command after flash by "Registry" .
EDIT 2 : In re-uploading

[chanvi93]

Update 27-May-2009
Kitchen 4 P3600 i_21232

21725 QVGA WWE+FRA Kitchen for P3600 i TEST 2 (http://www.4shared.com/dir/14851497/6c33d852/KitchenROM_P3600_I.html)

I ported xip from the latest WWE DOPOD WM 6.1 for P 3600i , OEM is completely for your device , i deleted some old software and put in a folder " P3600i_RemovedFrom_OEM.rar" in the same DL folder .
Read here (http://forum.xda-developers.com/showthread.php?t=513421) before .
The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

[Shedzer]

Hi sorry , after Uploade file i constate a problem with this new uild for our device , i have deleted and uploade later
The problem is in SYS-21725-SHARED-COMMON-OS , the .rgu file , at the end (the latest line) remove this command :
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Touch\Filter]
"MinimumTapTime"=dword:28

This command is for Touch device , it's not the case for our device .
Regards

EDIT : You an open .rgu file with NotePad , or delete this command after flash by "Registry" .

Right, easily done that thanks.

After flashing the new build ROM, some problems (might be only me), I found out when access Backlight within Settings, I can't adjust the screen brightness as that tab is not there while I may do that using the shortcut at CHome as the tab is there. Any ideas?

[Andych]

Update 27-May-2009
Kitchen 4 P3600 i_21232

21725 QVGA WWE+FRA Kitchen for P3600 i TEST 2 (http://www.4shared.com/dir/14851497/6c33d852/KitchenROM_P3600_I.html)

I ported xip from the latest WWE DOPOD WM 6.1 for P 3600i , OEM is completely for your device , i deleted some old software and put in a folder " P3600i_RemovedFrom_OEM.rar" in the same DL folder .
Read here (http://forum.xda-developers.com/showthread.php?t=513421) before .
The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

Master Chanvi
Many thanks....a newer toy to play with....at this rate I won't have a chance to test the stability of my personalised Roms...I will be flashing them every couple of days with new ones.

It is late now so I will play with this over the weekend.

Many thanks again.....
Andy

[chanvi93]

Right, easily done that thanks.

After flashing the new build ROM, some problems (might be only me), I found out when access Backlight within Settings, I can't adjust the screen brightness as that tab is not there while I may do that using the shortcut at CHome as the tab is there. Any ideas?

It's normal , this is wm 6.5 structural , normaly you have also in Start- ShortCut a Backlight SC if you have not delete folder in EXT _ COMMON .

[Shedzer]

It's normal , this is wm 6.5 structural , normaly you have also in Start- ShortCut a Backlight SC if you have not delete folder in EXT _ COMMON .

I see. Anyway that's little problem to me.

Will try out more after my project ends. (yes I have been experimenting several days now and this is my only usable phone now :D ).

Anyway, keep up the good works.

[Andych]

Update 27-May-2009
Kitchen 4 P3600 i_21232

21725 QVGA WWE+FRA Kitchen for P3600 i TEST 2 (http://www.4shared.com/dir/14851497/6c33d852/KitchenROM_P3600_I.html)

I ported xip from the latest WWE DOPOD WM 6.1 for P 3600i , OEM is completely for your device , i deleted some old software and put in a folder " P3600i_RemovedFrom_OEM.rar" in the same DL folder .
Read here (http://forum.xda-developers.com/showthread.php?t=513421) before .
The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

Hi Chanvi
Used the new Kitchen today and all is well....I used the IE8MAN rom this time and modified it the same way I did the previous one....flashed up OK and all seems to fine....It is a little slower than the previous build but that could be due to using the IE8 ROM. I will see how it goes for a couple of days and then try the IE6 ROM.
It appears to still need the NikiSimFix to change the Advanced setting permanantly which is not a problem.
Many thanks again...I don't know what the other P3600i users are doing....they are missing out on a nice new build.

[chanvi93]

Hi Andych
You can delete in windows/StartUp folder "sddaemon.lnk" or in kitchen :
Kitchen_WWE+FRA_21725_Trinity\Kitchen_WWE+FRA_2172 5_Trinity\EXT\Trinity\COMMON\Trinity_External_Pack ages\Voice Speed Dial\0409
Open "app.dat" file by NotePad and delete :
Directory("\Windows\StartUp\"):-File("sddaemon.lnk","\Windows\sddaemon.lnk")
After you don't need NikiSimFix

[Andych]

Hi Andych
You can delete in windows/StartUp folder "sddaemon.lnk" or in kitchen :
Kitchen_WWE+FRA_21725_Trinity\Kitchen_WWE+FRA_2172 5_Trinity\EXT\Trinity\COMMON\Trinity_External_Pack ages\Voice Speed Dial\0409
Open "app.dat" file by NotePad and delete :
Directory("\Windows\StartUp\"):-File("sddaemon.lnk","\Windows\sddaemon.lnk")
After you don't need NikiSimFix

Thanks Chanvi
I will redo my Rom with the fix....I might try the IE6 Rom instead of IE8.
By the way, did you do anything to the Kitchen? It seems to be quicker in creating the ROM.
It might also be my PC...I have just updated to a new Windows 7 build since the last time I played with the other Kitchen.
Either way....it works well and I am happy to make my own personalised ROMs....

[the.decoy]

Many thanks again...I don't know what the other P3600i users are doing....they are missing out on a nice new build.

Actually I cooked and flashed 21725 (IE6_MANILA recipe) on Friday too. :D

Haven't had much time to thoroughly evaluate it yet ... just a few observations ...

Memory usage is definitely better (although it's still sluggish with me daring to run M2D :rolleyes:). In its idle state (just after a "hibernate" and L3 CleanRAM being run) it is about 68% used (34M used, 17M free). It will drift up into the 70s after I have run and closed a few apps but then I do another hibernate to bring it back down again.

The new start menu scroll-wheel navigation (sideways) takes a bit of getting used to (not complaining ... I had just got used to doing a rapid scroll downward using the wheel ... need to remember the finger gesture more often)

Even though it is the IE6 build, I cannot seem to get rid of the MS Widgets - if I disable them in the Kitchen it won't build (NBH Builder crashes). They chew up heaps of start menu so I have just moved the LNKs to a folder instead.

There is one last oddity I have had (and can't seem to fix so far) and that is that my dialler screen has lost its background image and is now solid white. Only a mild inconvenience but its definitely weird :confused:

Anyway, just posted to let Andy know he's not alone in testing out the new build/kitchen :p

[Andych]

Actually I cooked and flashed 21725 (IE6_MANILA recipe) on Friday too. :D

Haven't had much time to thoroughly evaluate it yet ... just a few observations ...

Memory usage is definitely better (although it's still sluggish with me daring to run M2D :rolleyes:). In its idle state (just after a "hibernate" and L3 CleanRAM being run) it is about 68% used (34M used, 17M free). It will drift up into the 70s after I have run and closed a few apps but then I do another hibernate to bring it back down again.

The new start menu scroll-wheel navigation (sideways) takes a bit of getting used to (not complaining ... I had just got used to doing a rapid scroll downward using the wheel ... need to remember the finger gesture more often)

Even though it is the IE6 build, I cannot seem to get rid of the MS Widgets - if I disable them in the Kitchen it won't build (NBH Builder crashes). They chew up heaps of start menu so I have just moved the LNKs to a folder instead.

There is one last oddity I have had (and can't seem to fix so far) and that is that my dialler screen has lost its background image and is now solid white. Only a mild inconvenience but its definitely weird :confused:

Anyway, just posted to let Andy know he's not alone in testing out the new build/kitchen :p

Hey Decoy....I was able to remove the widgets....see the attached pic.
Everything completed OK and flashed up nicely.

[the.decoy]

Hey Decoy....I was able to remove the widgets....see the attached pic.
Everything completed OK and flashed up nicely.

Yeah I don't understand it either, I set those widgets to false and try a "Create" ... it makes it through the whole file arranging process and then near the end of cooking (when it starts building the NBH file) the NBH Builder app has a fatal error.

[Andych]

Yeah I don't understand it either, I set those widgets to false and try a "Create" ... it makes it through the whole file arranging process and then near the end of cooking (when it starts building the NBH file) the NBH Builder app has a fatal error.

That is really strange....have you tried making each one false individually...like Money first, then create etc?

By the way, using IE6 MANTIT I get 23.9 meg free using the standard screen (no MD2).
I like the horizontal scroll, it seems more logical to me....still have some stuff to play with but it looks pretty good so far.

[ssamth2003]

That is really strange....have you tried making each one false individually...like Money first, then create etc?

By the way, using IE6 MANTIT I get 23.9 meg free using the standard screen (no MD2).
I like the horizontal scroll, it seems more logical to me....still have some stuff to play with but it looks pretty good so far.

Hello Andych,
mine to share your cooked rom, I have try to do with my Windows 7, but not success and have not much time to try again.

[Andych]

Hello Andych,
mine to share your cooked rom, I have try to do with my Windows 7, but not success and have not much time to try again.

There is no time to upload it tonight.....I will tomorrow night though.
It actually takes less time to cook than it will to download it.

In windows 7 or Vista....you need to run the Kitchen as administrator, and use 7zip to unpack the Kitchen....there can be problems if you use winzip.

I actually used Winrar and it worked fine but Chanvi suggests 7zip...I think...read his kitchen thread and watch the videos.

[ssamth2003]

There is no time to upload it tonight.....I will tomorrow night though.
It actually takes less time to cook than it will to download it.

In windows 7 or Vista....you need to run the Kitchen as administrator, and use 7zip to unpack the Kitchen....there can be problems if you use winzip.

I actually used Winrar and it worked fine but Chanvi suggests 7zip...I think...read his kitchen thread and watch the videos.

Thks very much Andych,

[Andych]

Thks very much Andych,

OK...for what it is worth I have uploaded the Rom I am currently using.
http://www.4shared.com/file/109795624/401b8952/RELEASE_P3600I.html

[the.decoy]

Hey Andy,

That is really strange....have you tried making each one false individually...like Money first, then create etc?

By the way, using IE6 MANTIT I get 23.9 meg free using the standard screen (no MD2).
I like the horizontal scroll, it seems more logical to me....still have some stuff to play with but it looks pretty good so far.

After a bit of experimenting I discovered that it wasn't the widgets that were bombing the build, it was the Netflix package (even weirder really). Anyway, I was able to do a build without the widgets.

However, after doing some test flashing yesterday I discovered that no matter what I do, I still have the "all white" dialler screen problem :confused:

I have freshly unzipped (using 7zip) a 21725 kitchen, cooked, and flashed with both IE6MAN and IE6ULITE. Everytime I go to use the dialler it looks like this:

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler01.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler02.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler03.jpg

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler04.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler05.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler06.jpg

The only postinstall cabs in my SDConfig.txt are:
CAB: \Storage Card\Cabs\iContactBE6.2M2D.cab
CAB: \Storage Card\Cabs\OpalKeyboard_WWE.cab
CAB: \Storage Card\Cabs\CachePIE5_Messaging_SD.cab
CAB: \Storage Card\Cabs\P3600i_BT_Fix.cab
CAB: \Storage Card\Cabs\Configuration_Network.cab

Is noone else getting this on their dialler screen?

Thanks!

[chanvi93]

Hi the.decoy
Check in OEM - COMMON the Phonecanvas folder , then copy one by one the png and gif files to windows , note if you have missing files , if yes your kitchen is corrupt , DELETE all before , DL again and unzippe with 7z .

[ssamth2003]

Hey Andy,



After a bit of experimenting I discovered that it wasn't the widgets that were bombing the build, it was the Netflix package (even weirder really). Anyway, I was able to do a build without the widgets.

However, after doing some test flashing yesterday I discovered that no matter what I do, I still have the "all white" dialler screen problem :confused:

I have freshly unzipped (using 7zip) a 21725 kitchen, cooked, and flashed with both IE6MAN and IE6ULITE. Everytime I go to use the dialler it looks like this:

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler01.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler02.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler03.jpg

http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler04.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler05.jpg http://i62.photobucket.com/albums/h100/redshirt_ensign/HTC/WhiteDialler06.jpg

The only postinstall cabs in my SDConfig.txt are:
CAB: \Storage Card\Cabs\iContactBE6.2M2D.cab
CAB: \Storage Card\Cabs\OpalKeyboard_WWE.cab
CAB: \Storage Card\Cabs\CachePIE5_Messaging_SD.cab
CAB: \Storage Card\Cabs\P3600i_BT_Fix.cab
CAB: \Storage Card\Cabs\Configuration_Network.cab

Is noone else getting this on their dialler screen?

Thanks!



Thks Andych for your work, but after flash i have same problem too

[the.decoy]

Hi the.decoy
Check in OEM - COMMON the Phonecanvas folder , then copy one by one the png and gif files to windows , note if you have missing files , if yes your kitchen is corrupt , DELETE all before , DL again and unzippe with 7z .

Thanks chanvi, I will have a look into it over the weekend.

However, I did just have a quick look through the Windows folder on the phone and the "dlrback_port.png" is definitely there and intact. Weird ... maybe it is some of the miscellaneous gifs that get overlayed on top of it that are covering it up :confused:

Cheers,
-Decoy

[Andych]

Thks Andych for your work, but after flash i have same problem too

Well I don't use the phone...my other half does so I had no idea the dialler came up that way....I will also have a look over the weekend.

Do I take it that you were able to flash using My ROM?
Were you able to cook your own??
If so, what was different to the way you were doing it before?
A little feedback may help others along the way.

[purpleaglex]

Update 27-May-2009
Kitchen 4 P3600 i_21232

21725 QVGA WWE+FRA Kitchen for P3600 i TEST 2 (http://www.4shared.com/dir/14851497/6c33d852/KitchenROM_P3600_I.html)

I ported xip from the latest WWE DOPOD WM 6.1 for P 3600i , OEM is completely for your device , i deleted some old software and put in a folder " P3600i_RemovedFrom_OEM.rar" in the same DL folder .
Read here (http://forum.xda-developers.com/showthread.php?t=513421) before .
The alone difference is DEVICE is "P3600i" and OS ID : 401 .
I can't test it because have not device but i know it will boot without problem .

Hi Chanvi93,

I saw a "bbcbres.dll.0409.mui" in 4shared folder . What is it for ?

Thanks

[joncgde2]

i don't know what you guys are doing, but i'm following this as much as i can with interest :D


keep up the good work! :D

[ssamth2003]

Well I don't use the phone...my other half does so I had no idea the dialler came up that way....I will also have a look over the weekend.

Do I take it that you were able to flash using My ROM?
Were you able to cook your own??
If so, what was different to the way you were doing it before?
A little feedback may help others along the way.


yeh..andych. finally i can cook my own rom. 1st i use winrar to extract then got problem that the kitchen not really work. some are missing. now i change to 7zip and it work ok. but for the dialler still the same problem, but i reinstall dialer cab from postinstall folder (previus rom of chanvi) then its work ok now.



i don't know what you guys are doing, but i'm following this as much as i can with interest :D


keep up the good work! :D

Sorry we're work on your thread but this is concern to new cooked rom of our trinity. :)

[Lovedonor]

Dear All Teachers,

I followed everything on http://forum.xda-developers.com/showthread.php?t=399827, SPL flashed to "SPL-3.20. Olipro".

But now I need to rollback this TRIN100(P3600i) to the MTF SPL.

Seems like this "SPL-3.20. Olipro" is locked and cannot be replace, since I've been trying to rollback(downgrade) to HSPL 1.3 Olipro, HSPL 1.2 Olipro, SPL 1.2, and even MTF SPL, somehow unsuccessful for "4 Days".

I did search and read in many many threads, guess it's an highly expert skill.

Kindly give me a hand ;) Please!

[chanvi93]

Hello all
Just check this entries please :
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"ext"="\\windows\\phcanhtc.dll"
"Enabled"=dword:00000001

I think something in kitchen has change "Enable"=dword:00000000
Check in Phonecanvas .rgu file , this entry is inside .

[the.decoy]

Hello all
Just check this entries please :
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"ext"="\\windows\\phcanhtc.dll"
"Enabled"=dword:00000001

I think something in kitchen has change "Enable"=dword:00000000
Check in Phonecanvas .rgu file , this entry is inside .

Yes, this fixes it! :)
Set the value back to "Enable"=dword:00000000 and the wm6.5 dialler is fully visible.

Thanks Chanvi.

[chanvi93]

Hi Chanvi93,

I saw a "bbcbres.dll.0409.mui" in 4shared folder . What is it for ?

Thanks

Thi's for the previous version , don't take care .

[chanvi93]

How to upgrade to new build .
DL Trinity ( not I) kitchen , copy SYS-21806 in your SYS ( you cna delete old ) .
Copy ROM-SHARED-21806 and rename : ROM-P3600i-21275 to 21806 .

2 news packages in EXT : FingerKeyboard and PACKAGE_Jade_Arcsoft_MMS ( delete old : ArcSoft_MMS_4_2_8_1_FR )

[the.decoy]

How to upgrade to new build .
DL Trinity ( not I) kitchen , copy SYS-21806 in your SYS ( you cna delete old ) .
Copy ROM-SHARED-21806 and rename : ROM-P3600i-21275 to 21806 .

2 news packages in EXT : FingerKeyboard and PACKAGE_Jade_Arcsoft_MMS ( delete old : ArcSoft_MMS_4_2_8_1_FR )

Done! :)

Although I also went through and replaced the following packages in each of the EXT-P3600i-[RECIPENAME]-P3600i_External_Packages folders (eg: EXT-P3600i-6IEULITE-P3600i_External_Packages):

browsingie_IE8_21725 --> browsingie_IE8_21806
CHome21725 --> CHome21806
Lockscreen21725 --> Lockscreen21806

*Note: the 21806 versions are under EXT-COMMON-Trinity_External_Packages in the Trinity Kitchen.

I imagine they are probably the same packages anyway and renaming the folders will do but I copied the 21086 folders just in case.

Oh, and I also still keep putting "bbcbres.dll.0409.mui" back into SYS-21806-SHARED-0409-Entertainment_Lang_0409-bbcbres.dll.0409.mui as it is technically missing (not that I actually play BubbleBreaker anymore, lol)

Thanks for the update Chanvi! I will let you know how the memory usage goes (I have built a ULITE with 5M PP and only the Widgets removed).

EDIT: Oh and you will also need to update the ROM Version from 725i to 806i (because the XIP is still the same one from ROM-P3600i-21725). This is done in the Xipporterex window (same as the PP value changing) - click "Find Date/Version on \ROM\Xip\" and then edit "ROM Version" and click "Change".

[chanvi93]

Thanks the.decoy for these precision ; the same way for someone want to cook WM 6.1 , a kitchen for this in post 3 from my threat .

[the.decoy]

Thanks the.decoy for these precision ; the same way for someone want to cook WM 6.1 , a kitchen for this in post 3 from my threat .

No worries.

I have actually uploaded a copy of the Kitchen with all of those changes done to it:

21806 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?ni42mmmywqn) (copy of 21725 kitchen, modded to 21806)

You absolutely need 7zip to open this as it is a 7z archive.

Cheers,
-Decoy

[purpleaglex]

No worries.

I have actually uploaded a copy of the Kitchen with all of those changes done to it:

21806 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?ni42mmmywqn) (copy of 21725 kitchen, modded to 21806)

You absolutely need 7zip to open this as it is a 7z archive.

Cheers,
-Decoy

Many Thanks decoy

[the.decoy]

OK, I have made up a kitchen package from the latest 21812 Trinity build that Chanvi has posted (has the new HS+UI recipe as an option).

I used the same method as with 21806 so hopefully that is ok ... but have just successfully built and flashed a 21806_6HSUI rom on my own p3600i so I'm pretty sure its all good.
Even still - use at own risk ;)

21812 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?eomejzdgmr2) (copy of 21725 kitchen, modded to 21812)

Now to go and play around with this new Homescreen UI ... :D

Cheers!

EDIT: For those with Win7 or any other Kitchen issues, your welcome to just use the WWE_21806_6HSUI rom (http://www.mediafire.com/?zzwzm32jkz5) that I cooked. (Don't ask me to explain the HS+UI interface ... I am still working it out for myself).

[Shedzer]

OK, I have made up a kitchen package from the latest 21812 Trinity build that Chanvi has posted (has the new HS+UI recipe as an option).

I used the same method as with 21806 so hopefully that is ok ... but have just successfully built and flashed a 21806_6HSUI rom on my own p3600i so I'm pretty sure its all good.
Even still - use at own risk ;)

21812 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?zbjmnyydi0m) (copy of 21725 kitchen, modded to 21812)

Now to go and play around with this new Homescreen UI ... :D

Cheers!

EDIT: For those with Win7 or any other Kitchen issues, your welcome to just use the WWE_21806_6HSUI rom (http://www.mediafire.com/?zzwzm32jkz5) that I cooked. (Don't ask me to explain the HS+UI interface ... I am still working it out for myself).

Hey thanks decoy for the repackage.

Anyway, after 2 weeks running 21725 (heavily strip downed 8IEMANTIT), nothing major happened (I did found out the blank phone canves problem but didn't notice the solution until recently :( )

Some of my thoughts on WinMo 6.5 (NOT Chanvi's ROM fault ;) ):

1) With CHome, surfing web using IE/Opera is pain in the ars*. Too slow due to low memory.
2) When someone calls in or when the phone receives a text, the phone tends to "activate" slower means I may miss my calls or got a "delayed" text. (Might be low memory problem again?)

But, sacrifice is always needed for the latest stuff eh. Will cook the new build if there's time to spare and hopefully report back.

[the.decoy]

Some of my thoughts on WinMo 6.5 (NOT Chanvi's ROM fault ;) ):

1) With CHome, surfing web using IE/Opera is pain in the ars*. Too slow due to low memory.
2) When someone calls in or when the phone receives a text, the phone tends to "activate" slower means I may miss my calls or got a "delayed" text. (Might be low memory problem again?)


Yeah, memory is definitely the the Achilles Heel with these Trinity/P3600I's :rolleyes:

I was seeing similar issues when using Titanium, M2D or anything else with major memory usage. That's why on the last few 6.5 roms, I have been running ultralite builds with IE6 and no CHome (I went back to the old HTC Home Plugin). I just wanted to know how stable they were without low memory making them worse.

Even still, the memory leaking in the 21*** roms has been pretty rough, I have gotten in the habit of setting Hibernate to a soft-key and using it every time I finish running an app or making a call.

Happilly 21806 and 21812 seem to be a bit better with the memory leak ... will have to see how it goes. I am also finding the HS+UI quite easy-going on the memory usage so the system isn't too sluggish as yet.

[Shedzer]

Hey decoy, could you check your 6IEFooTit EXT folder? I found out mine has an IE8 within although to be honest I wasn't going to use that build. :)

[the.decoy]

Hey decoy, could you check your 6IEFooTit EXT folder? I found out mine has an IE8 within although to be honest I wasn't going to use that build. :)

Damn! Sorry about that. Looks like I messed up some the EXT package copying (not just the 6IEFooTit, also some of the others - the HSUI build is ok though).

Thanks for point it out Shedzer :)

I have fixed up all the EXT packages and re-archived the Kitchen. The link (above) has been updated.

Also, while I was in there I created a new hybrid recipe called 6HSUIMAN as I found that the HS+UI comes configured to expect M2D installed, so I have added the M2D packages.

Again, because I have build this to run for myself, I have upload the pre-cooked rom if anybody else wants it: WWE_21812_HSUIMAN (http://www.mediafire.com/?mnuqnw2mnzm)

[the.decoy]

Might as well recap all those links into one new post ;)

Kitchen:
21812 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?eomejzdgmr2) (with 6HSUI & 6HSUIMAN)

ROMs:
WWE_21812_6HSUI (http://www.mediafire.com/?zzwzm32jkz5) (UltraLite with Homescreen PlusPlus UI)

WWE_21812_6HSUIMAN (http://www.mediafire.com/?mnuqnw2mnzm) (UltraLite with Homescreen PlusPlus UI and M2D)

[Shedzer]

I see. I worked out my own repackaging using Chanvi's Trinity original package. I knew something was wrong with the copying when CHome wasn't working either.

Anyway thanks for the effort mate. You already save Chanvi some time. ;)

[the.decoy]

The new cv93+oggi kitchen is ready. There are 3 precooked roms available too:

Kitchen:
21815 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?nzilkgyyjdi) (with 6HSUI & 6HSUIMAN) [corrupt archive replaced]

ROMs:
WWE_21815_6IEULITE_P3600I (http://www.mediafire.com/?qdzmv2m2tm3) (IE6 UltraLite) [corrupt archive replaced]

WWE_21815_6HSUIMAN_P3600I (http://www.mediafire.com/?njdghiyyq5z) (IE6 UltraLite with Homescreen PlusPlus UI and M2D)

WWE_21815_6IEMANTIT_P3600I (http://www.mediafire.com/?ziifnwtmyht) (IE6 Full with M2D and Titanium)


I have test flashed HSUIMAN and MANTIT roms.

Chanvi's (optional) replacement CPR files for CHome and StartMenu are in the WM65_MODS folder. See his original thread for details on these.

[robinbb]

The new cv93+oggi kitchen is ready. There are 3 precooked roms available too:

Kitchen:
21815 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?unqmyztoqkm) (with 6HSUI & 6HSUIMAN)

ROMs:
WWE_21815_6IEULITE_P3600I (http://www.mediafire.com/?wzdcnm5mjy2) (IE6 UltraLite)

WWE_21815_6HSUIMAN_P3600I (http://www.mediafire.com/?njdghiyyq5z) (IE6 UltraLite with Homescreen PlusPlus UI and M2D)

WWE_21815_6IEMANTIT_P3600I (http://www.mediafire.com/?ziifnwtmyht) (IE6 Full with M2D and Titanium)


I have test flashed HSUIMAN and MANTIT roms.

Chanvi's (optional) replacement CPR files for CHome and StartMenu are in the WM65_MODS folder. See his original thread for details on these.

Hey - this is pretty exciting! Congratulations
I would go for the Lite and then run SPB Mobile Shell. Who is going to be the first to give feedback?
I hate to say it, but I am hesitant, having been burnt so many times. I have been back on Schap v4.30 for some time, loving the stability but itching for an update!

[the.decoy]

Hey robin :)

Hey - this is pretty exciting! Congratulations
I would go for the Lite and then run SPB Mobile Shell. Who is going to be the first to give feedback?
I hate to say it, but I am hesitant, having been burnt so many times. I have been back on Schap v4.30 for some time, loving the stability but itching for an update!

You should give the HS+UI build a look then. HomeScreen on UltraLite has very similar feel to SPB on Ultralite (similar performance too). It's only major lacking I see is no kind of Photo Contacts/Dialing (I just used iContacts instead).

You might want to build one yourself from the kitchen though, as I have added M2D to that rom I cooked (HSUIMAN) and the sad fact is that M2d always ends up making our phones slower/unstable (but it looks sooo good before it crashes :p ). The reason I added into that rom is to make it available for short-term uses (i.e. go check weather or something and then kill M2D and return to HS for standby mode).

As for general stability, most of the recent cv93+oggi releases are pretty good as long as you keep an eye on the memory. It has been quite a while since my last "p3660i random corruption" moment as I have been mostly using UltraLites and keeping up the routine Hibernates/CleanRAMs.

However, for this latest release I am actually giving Titanium another try ... we'll see how it goes. At least Showaco has made us a decent CHome editor now so I don't have to grind away endlessly in regedit just to get a few important shortcuts on my today screen :rolleyes:

[kane81]

trying IE6 Full with M2D and Titanium...

Hope it goes well, will let you know :)

First bug - Java - the java version installed has no languages installed

you can test by going to jnomad.com in PIE6 and selecting australia adelaide

Java is installed, but you cant install the app cause you cant read the text.

Also - I think topbar should be installed as default for us ...

[kane81]

Cant seem to use facebook app included - it goes to a page where you enter your username and password, but ok just wont click.

[kane81]

how do I force 3G - seems to switch to EDGE - I set to Enable HSDPA only, but EDGE shows...

I use to always have 3G, but no stuck with EDGE showing.

[chanvi93]

trying IE6 Full with M2D and Titanium...

Hope it goes well, will let you know :)

First bug - Java - the java version installed has no languages installed

you can test by going to jnomad.com in PIE6 and selecting australia adelaide

Java is installed, but you cant install the app cause you cant read the text.

Also - I think topbar should be installed as default for us ...

Hello all
I have just discovered that this build and since 21806 has a bug with all .jar files ; if you downgrade to 21725 it will work fine .

[Korvin13]

Bad arhive
Kitchen:
21815 WWE+FRA Kitchen for P3600i (with 6HSUI & 6HSUIMAN)
and
WWE_21815_6IEULITE_P3600I (IE6 UltraLite)

[the.decoy]

Bad arhive
Kitchen:
21815 WWE+FRA Kitchen for P3600i (with 6HSUI & 6HSUIMAN)
and
WWE_21815_6IEULITE_P3600I (IE6 UltraLite)

Just doing a test download + unzip right now ... yep, they are :(

Sorry about that, I just checked and the original is fine - it must have been corrupted during upload.

I will upload them again and update the links.

Thanks for letting me know.

[the.decoy]

how do I force 3G - seems to switch to EDGE - I set to Enable HSDPA only, but EDGE shows...

I use to always have 3G, but no stuck with EDGE showing.

I had this happen once or twice on my old oem wm5 rom actually.

You can set it to be 3G_only by:

- Go to Settings->Personal->Phone
- Go to "Band" tab
- Set Band to be UMTS(2100+800)


Once it is on 3G again, you can usually set the band back to "Auto" so that Roaming (on EDGE networks) will still work if/when you need it.

Hope this fixes it for you :)

[robinbb]

Just doing a test download + unzip right now ... yep, they are :(

Sorry about that, I just checked and the original is fine - it must have been corrupted during upload.

I will upload them again and update the links.

Thanks for letting me know.

Data error in WWE_21815_6IEULITE_P3600I\ruu-signed.nbh . File is broken
Sorry - maybe I am too quick off the mark?!

[the.decoy]

LOL, only by a few minutes.

Am doing a test download of the replacement archives right now.

EDIT:
All good now! Have downloaded, tested & unzipped both of them successfully.

Sorry for the hassles folks :o ... _sigh_ I think I am like JB in Be Kind Rewind right now (just had a massive raid metadata corruption at home last night too :mad:)

[Korvin13]

LOL, only by a few minutes.

Am doing a test download of the replacement archives right now.

EDIT:
All good now! Have downloaded, tested & unzipped both of them successfully.

Sorry for the hassles folks :o ... _sigh_ I think I am like JB in Be Kind Rewind right now (just had a massive raid metadata corruption at home last night too :mad:)

Perfectly, now everything is all right. Today I will try

[robinbb]

Uploaded Lite OK
Install was nice and easy
My - there's lots of content! Glad to see that it is just IE, not Opera!
I have added:
* SPB Mobile Shell
* 4 icons in row
* 1-Calc
* Modaco No Data
* MSVC 1.6.21725
* Best Crypto
* Stock Manager
* Resisting putting back OxiExplorer and TomTom so as not to overload early on!
I wonder about:
* Should Cyberon be there as standard? There are lots of us MSVC users out here!
* It seems strange to have CleanRAM as well as Oxios Hibernate. I would have thought that CleanRAM alone was good enough?
* Out with AppToDate!
* It is nice to see ShutXP there - but I would love to link it to the Off button.

Just very early reaction - I look forward to using it!

VERY MANY THANKS for all the hard work!

[the.decoy]

* It seems strange to have CleanRAM as well as Oxios Hibernate. I would have thought that CleanRAM alone was good enough?

Actually I think they both target slightly different things (so I have read) ... I always got the very best results from doing a Hibernate THEN a Level3 cleanRAM.

Actually that is other benefit of having both, you can keep cleanRAM configured for the slow (but effective) Level3 setting, and then just use Hibernate for all the quick refreshes you might do just before locking the phone.


* It is nice to see ShutXP there - but I would love to link it to the Off button.


The funny thing is, I am yet to find a use for this app :confused:

It will never actually shutdown my phone (just turns the display off and I already have a dedicated button for that) and if I want to reboot I already have SoftReset.

So what else does it do? I am really curious because it keeps getting fairly prominent placing in all the ROM's launcher apps ... obviously I am missing something. :o

[ssamth2003]

Hi, the.decoy
just 1 question but may need explanation.
I have cab file for Thai language thats i always install to give enable to read thai langauge from any of cooked room. Pls tell me how i can include the cab in to the cooked rom? then i no need to install on every time. thks in advance. pls kind step by step explanation. thks.

[robinbb]

Thanks Decoy
I will try those cleaning ideas.
Yes - strange about ShutXP. With my Diamond it works fine (turns off properly)

[the.decoy]

Hi, the.decoy
just 1 question but may need explanation.
I have cab file for Thai language thats i always install to give enable to read thai langauge from any of cooked room. Pls tell me how i can include the cab in to the cooked rom? then i no need to install on every time. thks in advance. pls kind step by step explanation. thks.

Well first of all, you would need to add the cab to the kitchen and then cook it yourself. You can't go adding stuff to the NBH file.

But cooking your own with Chanvi's kitchen packs really isn't that hard. The only tricky part for your Thai language cab will be the part were you convert it into oem package folder to include it in the kitchen.


Download the Kitchen Converter (http://xda.b4pjs.co.uk/Kitchen%20Convertor.zip) bundle (by Da_G) and unzip it.
Copy your Thai language CAB file into that Kitchen Converter folder
Run CAB2OEM.bat and you will get a folder that is the unpacked version of your CAB file. eg: folder called "Thai_lang"


Then you need to grab the latest Kitchen, make a new EXT build folder (rom recipe) and add your "Thai_lang" folder to it.


Download the 21815 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?nzilkgyyjdi) and unzip it with 7zip
Go into the folder Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\
Make a copy of whichever build folder is the same name as the precooked rom you wanted to add Thai language to, and name it accordingly.
eg: copy "6IEMANTIT" and rename it "6IEMTTHAI" (call it whatever you want but probably best keep it under 10 char)
Get the "Thai_lang" package folder we made earlier and copy it into your new ext build folder.
eg: copy "Thai_lang" into "Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\6IEMTTHAI\"


Now you just need to run the Kitchen and build your ROM. If you are using Vista/Win7 then there might be some issues here ... I think you can do it if you run the kitchen as Admin, but there are other threads that will explain that.


Go to the Kitchen-WWE+FRA_21815_P3600I folder and run erviuskitchen.exe
Choose DEVICE = P3600I
Choose EXT Build = 6IEMTTHAI (or whatever you have called your build)
Click "Create ROM" button on the top left of window


If the build succeeds you will end up with the ROM Update utility being started and prompting you to plug in your phone, etc (just like when you download a pre-cooked rom). You can proceed straight into flashing your new rom or hit cancel.

The cooked ROM (and update utlity) will all be in the RELEASE_P3600I folder of the kitchen. Copy that whole folder somewhere and rename it accordingly (eg: "WWE_21815_6IEMTTHAI_P3600I" ). There is your own cooked rom.

Enjoy!

[ssamth2003]

Well first of all, you would need to add the cab to the kitchen and then cook it yourself. You can't go adding stuff to the NBH file.

But cooking your own with Chanvi's kitchen packs really isn't that hard. The only tricky part for your Thai language cab will be the part were you convert it into oem package folder to include it in the kitchen.


Download the Kitchen Converter (http://xda.b4pjs.co.uk/Kitchen%20Convertor.zip) bundle (by Da_G) and unzip it.
Copy your Thai language CAB file into that Kitchen Converter folder
Run CAB2OEM.bat and you will get a folder that is the unpacked version of your CAB file. eg: folder called "Thai_lang"


Then you need to grab the latest Kitchen, make a new EXT build folder (rom recipe) and add your "Thai_lang" folder to it.


Download the 21815 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?nzilkgyyjdi) and unzip it with 7zip
Go into the folder Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\
Make a copy of whichever build folder is the same name as the precooked rom you wanted to add Thai language to, and name it accordingly.
eg: copy "6IEMANTIT" and rename it "6IEMTTHAI" (call it whatever you want but probably best keep it under 10 char)
Get the "Thai_lang" package folder we made earlier and copy it into your new ext build folder.
eg: copy "Thai_lang" into "Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\6IEMTTHAI\"


Now you just need to run the Kitchen and build your ROM. If you are using Vista/Win7 then there might be some issues here ... I think you can do it if you run the kitchen as Admin, but there are other threads that will explain that.


Go to the Kitchen-WWE+FRA_21815_P3600I folder and run erviuskitchen.exe
Choose DEVICE = P3600I
Choose EXT Build = 6IEMTTHAI (or whatever you have called your build)
Click "Create ROM" button on the top left of window


If the build succeeds you will end up with the ROM Update utility being started and prompting you to plug in your phone, etc (just like when you download a pre-cooked rom). You can proceed straight into flashing your new rom or hit cancel.

The cooked ROM (and update utlity) will all be in the RELEASE_P3600I folder of the kitchen. Copy that whole folder somewhere and rename it accordingly (eg: "WWE_21815_6IEMTTHAI_P3600I" ). There is your own cooked rom.

Enjoy!

Thks very much for your promt reply...i will give a try and inform here. also thks for Chanvi for his greath kitchen.

[ssamth2003]

just completed follow your instruction, by try to send sms to test still can not read Thai language, while i install the cab file it read with no problem, may be i give another try or would be great if you have any advise.

[the.decoy]

just completed follow your instruction, by try to send sms to test still can not read Thai language, while i install the cab file it read with no problem, may be i give another try or would be great if you have any advise.

Oh, yes I was wondering if it would work for a language cab. :(

Sorry but those instructions are more appropriate for adding application cabs into a cooked rom.

You language cab probably has to make changes to other parts of the system ... I am sure there is a way to do it but I just don't know how (sorry I am still fairly new at this too).

You could always just put the language cab on your CD card and set it to auto install on first boot of the new ROM.

You just put a "SDConfig.txt" file on the root level of your SD card and reference the cabs inside it.

This is the one I keep on mine (which installs these 4 cabs on the first boot of every new rom):

SDConfig.txt
LOCK:Enabled
CAB: \Storage Card\Cabs\iContactBE6.2M2D.cab
CAB: \Storage Card\Cabs\CachePIE5_Messaging_SD.cab
CAB: \Storage Card\Cabs\P3600i_BT_Fix.cab
CAB: \Storage Card\Cabs\Configuration_Network.cab
LOCK:Disabled
RST: Reset


I know it isn't the same as having it pre-cooked into the rom but it is still pretty convenient.

[the.decoy]

Thanks Decoy
I will try those cleaning ideas.


Hmmm ... I must confess (after just doing some quick testing) that my suggestion for using Hibernate in that way might no longer be valid in 21815.

Chanvi has added Elias's AutoHibernate and as a result, every single time I manually run Hibernate it does not appear to release anything.

So I guess cleanRAM is indeed the only one you need to run now. Anyhow, prior to 21815 I was definitely getting good returns from the Hibernate/cleanRAM combo.


Yes - strange about ShutXP. With my Diamond it works fine (turns off properly)

Oh well, I am glad that it actually works for someone :p

However, what is really annoying me right now is my attempts to customise the pages/panels of CHome :(

Showaco's editor app works for enabling/disabling/ordering the panels ... but no matter what I do I cannot seem to change the apps on the launcher panels?? :confused:

I have tried editing the reg entries via the Showaco CHome Editor and using regedit ... as soon as I enable CHome on the Today screen they are just revert to those that come set on the rom ... wtf? :confused:

It has been a while since I last tried using Titanium/CHome ... anyone know what I am missing?

EDIT: ok .. less annoyed now :p Found you can still do it with a provxml file. Went and found the mxip_WWE_CHome_Programs.provxml file that Chanvi is using to set them in the rom and edited/imported that.

[ssamth2003]

Oh, yes I was wondering if it would work for a language cab. :(

Sorry but those instructions are more appropriate for adding application cabs into a cooked rom.

You language cab probably has to make changes to other parts of the system ... I am sure there is a way to do it but I just don't know how (sorry I am still fairly new at this too).

You could always just put the language cab on your CD card and set it to auto install on first boot of the new ROM.

You just put a "SDConfig.txt" file on the root level of your SD card and reference the cabs inside it.

This is the one I keep on mine (which installs these 4 cabs on the first boot of every new rom):

SDConfig.txt
LOCK:Enabled
CAB: \Storage Card\Cabs\iContactBE6.2M2D.cab
CAB: \Storage Card\Cabs\CachePIE5_Messaging_SD.cab
CAB: \Storage Card\Cabs\P3600i_BT_Fix.cab
CAB: \Storage Card\Cabs\Configuration_Network.cab
LOCK:Disabled
RST: Reset


I know it isn't the same as having it pre-cooked into the rom but it is still pretty convenient.

yeh..seem only the way for me... anyway thks for you kind support, keep doing great job..the.decoy

[the.decoy]

yeh..seem only the way for me... anyway thks for you kind support, keep doing great job..the.decoy

No worries. Although I must say that any credit should go to the Chanvi & Oggi Kitchen building team.

They are doing the real hard work porting these releases into the kitchen ... all I am doing is saving them the hassle of re-packaging it with the XIP folders and Ervius kitchen config to suit our P3600I's.

It's really just a lot of unzipping and folder copying :o While I'm at it I pre-cook a couple of the builds to make it easier for newer rom users (and those on Win7, etc).

Anyway, I really just glad that it seems to be helping a few people.

Cheers!
-Decoy

[kane81]

I had this happen once or twice on my old oem wm5 rom actually.

You can set it to be 3G_only by:

- Go to Settings->Personal->Phone
- Go to "Band" tab
- Set Band to be UMTS(2100+800)


Once it is on 3G again, you can usually set the band back to "Auto" so that Roaming (on EDGE networks) will still work if/when you need it.

Hope this fixes it for you :)

Thanks for that!

[kane81]

using
WWE_21815_6IEMANTIT_P3600I

how do I turn off this predict text thing - it is driving me nuts... keep moving the cursor pos to front making me mispell everything.

I turned auto complete off in keyboard settings, but that didnt change anything.
:(

[chanvi93]

Well first of all, you would need to add the cab to the kitchen and then cook it yourself. You can't go adding stuff to the NBH file.

But cooking your own with Chanvi's kitchen packs really isn't that hard. The only tricky part for your Thai language cab will be the part were you convert it into oem package folder to include it in the kitchen.


Download the Kitchen Converter (http://xda.b4pjs.co.uk/Kitchen%20Convertor.zip) bundle (by Da_G) and unzip it.
Copy your Thai language CAB file into that Kitchen Converter folder
Run CAB2OEM.bat and you will get a folder that is the unpacked version of your CAB file. eg: folder called "Thai_lang"


Then you need to grab the latest Kitchen, make a new EXT build folder (rom recipe) and add your "Thai_lang" folder to it.


Download the 21815 WWE+FRA Kitchen for P3600i (http://www.mediafire.com/?nzilkgyyjdi) and unzip it with 7zip
Go into the folder Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\
Make a copy of whichever build folder is the same name as the precooked rom you wanted to add Thai language to, and name it accordingly.
eg: copy "6IEMANTIT" and rename it "6IEMTTHAI" (call it whatever you want but probably best keep it under 10 char)
Get the "Thai_lang" package folder we made earlier and copy it into your new ext build folder.
eg: copy "Thai_lang" into "Kitchen-WWE+FRA_21815_P3600I\EXT\P3600i\6IEMTTHAI\"


Now you just need to run the Kitchen and build your ROM. If you are using Vista/Win7 then there might be some issues here ... I think you can do it if you run the kitchen as Admin, but there are other threads that will explain that.


Go to the Kitchen-WWE+FRA_21815_P3600I folder and run erviuskitchen.exe
Choose DEVICE = P3600I
Choose EXT Build = 6IEMTTHAI (or whatever you have called your build)
Click "Create ROM" button on the top left of window


If the build succeeds you will end up with the ROM Update utility being started and prompting you to plug in your phone, etc (just like when you download a pre-cooked rom). You can proceed straight into flashing your new rom or hit cancel.

The cooked ROM (and update utlity) will all be in the RELEASE_P3600I folder of the kitchen. Copy that whole folder somewhere and rename it accordingly (eg: "WWE_21815_6IEMTTHAI_P3600I" ). There is your own cooked rom.

Enjoy!

Hi the.decoy
Very good explanation , do you permit me to post a link in 3rd post of my threat ?

[the.decoy]

using
WWE_21815_6IEMANTIT_P3600I

how do I turn off this predict text thing - it is driving me nuts... keep moving the cursor pos to front making me mispell everything.

I turned auto complete off in keyboard settings, but that didnt change anything.
:(

The Auto-Correct and Word suggestion are two different checkboxes in Settings->Personal->Input ... have you turned off both?

I will try it out and see if there is a bug there.

[the.decoy]

Hi Chanvi,

Hi the.decoy
Very good explanation , do you permit me to post a link in 3rd post of my threat ?

Yes, please go right ahead :)

Although when I get a chance I think I will make a fresh post in the Trinity Kitchen thread and replace all the "P3600I" folder references for "Trinity" (otherwise might cause some confusion to the majority of people who aren't using I's).

Right now I guess I'd better get started on that 21900 kitchen, lol ;)

[the.decoy]

I know it seems pretty soon after 21815 but this new 21900 build (at least the new QM+Titanium version) is damn fast :D

I have uploaded the Kitchen and the main 4 IE6 roms precooked (sorry if there are any IE8 fans out there just let me know).

Kitchen:
WM6.5 QVGA WWE+FRA P3600I Kitchen 21900.5.0.20 (http://www.mediafire.com/?lmn3n5izwjn) [using faster 5.0.20 branch]

Notes from Chanvi:
1) .Jar files bug resolved with this OS branch 5.0.20
2) Removed Lock Screen animation for ringtones delay when phone is off with LS
3) New version 6IEQMTit : QuickMenu + Titanium
3) Downgrade NetCF 3.5 because version 3.7 has GAC....DirectX... file missing .

ROMs:
WWE_21900_6IEULITE_P3600I (http://www.mediafire.com/?c0hmrmjy2tz) (IE6 UltraLite)

WWE_21900_6IEQMTIT_P3600I (http://www.mediafire.com/?mm4yzzdiyzl) (IE6 Full with QuickMenu and Titanium) [NEW and FAST]

WWE_21900_6IEMANTIT_P3600I (http://www.mediafire.com/?yni2izjfmzi) (IE6 Full with M2D and Titanium)

WWE_21900_6HSUIMAN_P3600I (http://www.mediafire.com/?y33mnynynyu) (IE6 with Homescreen PlusPlus UI and M2D)


I have test flashed 6IEULITE and 6IEQMTIT roms.

* 6IEQMTIT *
The app icons seem a little bit screwed up on the Titanium "Applications" panel (the icon "PICTURE" keys weren't set in the provxml). It isn't a big problem ... just looks funny. Import the attached provxml (http://forum.xda-developers.com/attachment.php?attachmentid=200283&stc=1&d=1246259859) to fix it (disable Chome during import). Highly recommend checking out this rom as mine is currently running Titanium with 50~55% mem used on boot, average of 60% used once running :cool:

OK folks, have a good weekend!

Cheers,
-Decoy

UPDATE (29-Jun):
I have attached a .provxml file that is a copy of the original CHome "Programs" Panel setup xml (in the kitchen), but it has the correct icon "PICTURE" keys added to it. Unzip it, disable "Windows Default" from your Today Items list, open AdvancedConfig and import the .provxml file, then enable "Windows Default" again. Done! :)

If you want to fix it directly in the Kitchen (prior to cooking), then just use this .provxml file (rename it) to replace:
\EXT\P3600i\6IEQMTIT\P3600i_External_Packages\CHom e_Lang\0409\files\mxip_WWE_CHome_Programs.provxml
*Note: 6IEQMTIT is whichever EXT build you are fixing, eg: 6IEMANTIT or 6IEFOOTIT etc

================================================== ================================================== ====

UPDATE (30-Jun):
For all further postings/discussion of the P3600i WM6.5 Kitchen, please see this thread:

[KITCHEN][WWE][FRA][P3600I] [25.06.2009]WM6.5-21900 P3600i Kitchen

http://forum.xda-developers.com/showthread.php?t=531661 (http://forum.xda-developers.com/showthread.php?t=531661)

.

[chanvi93]

The Auto-Correct and Word suggestion are two different checkboxes in Settings->Personal->Input ... have you turned off both?

I will try it out and see if there is a bug there.

If you use an other keyboard more , the solution is in CommonNonEA rgu file :
[HKEY_LOCAL_MACHINE\SYSTEM\Inbox\RecipientAutocompl ete]
"MaxSuggestions"=dword:4
"IncludeContactsGroups"=dword:00000003

Try to change value , haven't time yet to test .
Regards

[ssamth2003]

I know it seems pretty soon after 21815 but this new 21900 build (at least the new QM+Titanium version) is damn fast :D

I have uploaded the Kitchen and the main 4 IE6 roms precooked (sorry if there are any IE8 fans out there just let me know).

Kitchen:
WM6.5 QVGA WWE+FRA P3600I Kitchen 21900.5.0.20 (http://www.mediafire.com/?lmn3n5izwjn) [using faster 5.0.20 branch]

Notes from Chanvi:


ROMs:
WWE_21900_6IEULITE_P3600I (http://www.mediafire.com/?c0hmrmjy2tz) (IE6 UltraLite)

WWE_21900_6IEQMTIT_P3600I (http://www.mediafire.com/?mm4yzzdiyzl) (IE6 Full with QuickMenu and Titanium) [NEW and FAST]

WWE_21900_6IEMANTIT_P3600I (http://www.mediafire.com/?yni2izjfmzi) (IE6 Full with M2D and Titanium)

WWE_21900_6HSUIMAN_P3600I (http://www.mediafire.com/?y33mnynynyu) (IE6 with Homescreen PlusPlus UI and M2D)


I have test flashed 6IEULITE and 6IEQMTIT roms.

* 6IEQMTIT *
The app icons seem a little bit screwed up on the Titanium "Applications" panel (pretty sure it is because the apps and there order have been changed and the icon "PICTURE" keys weren't changed to suit). It isn't a big problem ... just looks funny. If I get them sorted I will post a .provxml to fix it. Still recommend checking out this rom as mine is currently running Titanium with 50~55% mem used :cool:

OK folks, have a good weekend!

Cheers,
-Decoy
Thks very much, you are very quick, the.decoy. and thks chanvi for your great tools.

[kane81]

The Auto-Correct and Word suggestion are two different checkboxes in Settings->Personal->Input ... have you turned off both?

I will try it out and see if there is a bug there.

Yes both are off... what happens is there when I type,

is I get this underscore '_' blinking, then it disappears and jumps to the front of the word....

it is very odd, it applies to all keyboards

so say I type

'Hello w'

the cursor will jump to and cause me to do this when writing.

'Hello orldw'

I dont know what this little blinking '_' thing is but it is annoying as hell!

Only a couple of frezzes, but no corruptions so far!

[chanvi93]

Hi kane81
This is what i said in my threat , all 5.0.50 branch cause 2 bugs but only on our device , work fine in other ;
1) .jar don't work
2) Hang and must write slowly by keyboard
All this inconvenient resolved with 21900 branch 5.0.20

[Shedzer]

Yes both are off... what happens is there when I type,

is I get this underscore '_' blinking, then it disappears and jumps to the front of the word....

it is very odd, it applies to all keyboards

so say I type

'Hello w'

the cursor will jump to and cause me to do this when writing.

'Hello orldw'

I dont know what this little blinking '_' thing is but it is annoying as hell!

Only a couple of frezzes, but no corruptions so far!

Yeah, I do have such problems also but Chanvi did mention it was fix in the new build. Got to try out the new build after having such annoyances for a week. :mad:

Again, thanks decoy for the upload.

EDIT: Anyone know which file in the kitchen is the Bejeweled game file? I certainly don't need that. Thanks.

[ssamth2003]

Thks very much, you are very quick, the.decoy. and thks chanvi for your great tools.


first boot i can see 27MB free from 6IEQMTIT, and after i do my own on the same with disable some soft i can see 28MB///very good thks very much, this version seem very fast.
so far, found the ring tone can not change. is it a bug or i do something wrong?

[kane81]

build 2900 is heaps faster!

Java however is still broken in terms of lanuage not installed.

[the.decoy]

I have attached a .provxml file (http://forum.xda-developers.com/attachment.php?attachmentid=200283&d=1246259859) to the 21900 Kitchen post (http://forum.xda-developers.com/showpost.php?p=4025680&postcount=644) that will fix up the incorrect icons in the CHome "Programs" panel (on any of the Titanium builds of 21900).

You can import it with AdvancedConfig and fix it on your running rom and/or replace the original .provxml in the Kitchen (for fixing it in your next cooked rom).

If you wanted to alter the order of any of those programs before you import the new reg settings, just edit the xml file (it's pretty obvious syntax) but make sure you keep the "PICTURES" keys associated with whatever the primary app is on each panel. Also note that the "ADC" panel is effectively invisible (some sort of hangover from the panel originally being a "Welcome" setup panel).

You might want to pick entirely different apps to run on some pages of the panel. Again, that is fairly obvious how to do when you edit the file ... but the icons will be the same unless you change the "PICTURES" key. You can map it directly to a PNG image file or reference another icon number. I have tested all values (1001-1020) and listed them below ... the descriptions are just what I wrote, not authoritative.

Sorry for boring anyone who already knows all about customising CHome pages ... but I thought I should at least mention it here.


1000 = AudioManager
1001 = HTCAlbum
1002 = VOIP/SIP
1003 = BlueTooth
1004 = RecycleBin (ClearTemp?)
1005 = FootPrints
1006 = SatDish (QuickGPS?)
1007 = Hibernate
1008 = e^ (???)
1009 = WinRAR
1010 = Backlight
1011 = LockDevice
1012 = WiFi
1013 = Camera
1014 = CommManager
1015 = USB Link
1016 = NaviPanel
1017 = AdvancedConfig
1018 = PHM regedit
1019 = Total Commander
1020 = psShutXP

[ssamth2003]

I think if we make a new thread for P3600i Rom Kitchen should be great in order not to disturbed P3600i Rom Collection, after we can confirm surly working rom then we can post that rom here.

[the.decoy]

I think if we make a new thread for P3600i Rom Kitchen should be great in order not to disturbed P3600i Rom Collection, after we can confirm surly working rom then we can post that rom here.

Actually that is a very good idea. I will just check first if Chanvi wants to be the thread creator and then I will pull together all the info from my last few major posts (most recent kitchen, adding cabs to kitchen, Chome icons, etc) and post it across.

[chanvi93]

Actually that is a very good idea. I will just check first if Chanvi wants to be the thread creator and then I will pull together all the info from my last few major posts (most recent kitchen, adding cabs to kitchen, Chome icons, etc) and post it across.

Hi all
It's a good idea , you can create a new threat and put working rom after here , just reference a link to my (NON I) threat for new informations , i haven't many time to reply in 2 threat .
Regards

[the.decoy]

Hi all
It's a good idea , you can create a new threat and put working rom after here , just reference a link to my (NON I) threat for new informations , i haven't many time to reply in 2 threat .
Regards

Done.

For all further postings/discussion of the P3600i WM6.5 Kitchen, please see this thread:

[KITCHEN][WWE][FRA][P3600I] [25.06.2009]WM6.5-21900 P3600i Kitchen

http://forum.xda-developers.com/showthread.php?t=531661 (http://forum.xda-developers.com/showthread.php?t=531661)

[sivami]

hy
i have some problem with the 6.5 full ROM. it starts to install, but when installation really starts it doesn't move from 0%. what can i do?
thx

[the.decoy]

hy
i have some problem with the 6.5 full ROM. it starts to install, but when installation really starts it doesn't move from 0%. what can i do?
thx

Exactly which ROM?

Do you have a P3600i or is it a Trinity/DoPod/P3600 ?

Most importantly - Are you doing it with the phone on the Olipro Hard-SPL (tri-color screen)?

Have you read the guide (http://forum.xda-developers.com/showthread.php?t=399827) on how to FIRST replace your SPL with the Olipro Hard-SPL, BEFORE you try and install any roms? If not you may have already bricked your phone :(

[kane81]

build 2900 is heaps faster!

Java however is still broken in terms of lanuage not installed.


FYI My roms file system today became corrupt - but atleast it was stable for a few months! :)

[minigirl]

hi all ,i m new here just recenly brought a used HTC P3600i with Windows 6.5.but it seem to be so lag..no smooth...always Hang.& y de battery also last for only half day only,is it windows problem?is it got any way or need to reflash it back to Window 6.0? my previous chinese software also cannot use in window 6.5....got any other chinese writing sofeware recommend

[the.decoy]

hi all ,i m new here just recenly brought a used HTC P3600i with Windows 6.5.but it seem to be so lag..no smooth...always Hang.& y de battery also last for only half day only,is it windows problem?is it got any way or need to reflash it back to Window 6.0? my previous chinese software also cannot use in window 6.5....got any other chinese writing sofeware recommend

Hi minigirl, if your p3600i has already been flashed with a 6.5 rom then hopefully you already have a Hard SPL on there and you can safely try out a few different 6/6.1/6.5 roms and find one you like. HardSPL is like a boot loader for doing the rom flashing from (what does it say on the tri-color screen if you hold SLEEP + CAMERA & HARD-RESET).

First I would suggest you check which build of 6.5 you have on there as I suspect it will be an old one ... and the latest 6.5 builds are really quite stable and not laggy (especially if you run them without M2D and other UI enhancements).

Go to Start Menu -> Settings -> About (might be under "System" sub-folder) and you will see the Build number.

Also, with the battery ... I'm afraid the P3600i is bit heavy on the battery usage ... although if you are not making it through a whole day then I would guess that you might have some data service running too often. Constant internet usage (like "Push Email" from an Exchange server) will demolish you battery life ... and screen backlight settings can also be a factor.

Welcome to the P3600i community :)

[minigirl]

hmm......i dunno how to flash it....can anybody teach me step by step.....also which WM 6.1 rom is better?:confused:

[minigirl]

Hi minigirl, if your p3600i has already been flashed with a 6.5 rom then hopefully you already have a Hard SPL on there and you can safely try out a few different 6/6.1/6.5 roms and find one you like. HardSPL is like a boot loader for doing the rom flashing from (what does it say on the tri-color screen if you hold SLEEP + CAMERA & HARD-RESET).

First I would suggest you check which build of 6.5 you have on there as I suspect it will be an old one ... and the latest 6.5 builds are really quite stable and not laggy (especially if you run them without M2D and other UI enhancements).

Go to Start Menu -> Settings -> About (might be under "System" sub-folder) and you will see the Build number.

Also, with the battery ... I'm afraid the P3600i is bit heavy on the battery usage ... although if you are not making it through a whole day then I would guess that you might have some data service running too often. Constant internet usage (like "Push Email" from an Exchange server) will demolish you battery life ... and screen backlight settings can also be a factor.

Welcome to the P3600i community :)

My version WM 6.5 professional
CE OS 5.2.21500 (Bluild 21500.5.0.0

but i dun like it...

any WM 6.1 recomended?

[the.decoy]

hmm......i dunno how to flash it....can anybody teach me step by step.....also which WM 6.1 rom is better?:confused:

I have just discovered that the "official" guide page is now dead ... but I am in the process of rebuilding it here:

P3600i Flashing Tutorial (http://forum.xda-developers.com/showthread.php?p=4550781#post4550781)

My version WM 6.5 professional
CE OS 5.2.21500 (Bluild 21500.5.0.0

but i dun like it...

any WM 6.1 recomended?

I see over in my Kitchen thread that oggi is helping you out with WM6.1 roms, but I must say that 21500 is a REALLY old build of 6.5 and you would find something like 21900 (or even the latest 23041) builds to be far more stable and fast than your old one.

Anyway, I'm sure once you get the hang of flashing new ROMs you be just as addicted to trying new ones constantly like the rest of us ;)

Also, I know you have already flashed that ROM that oggi recommended, but you never did confirm that you are using the HardSPL bootloader ... I think you should definitely check this before flashing any more ROMs otherwise you run the risk of killing your phone during a bad flash attempt. :eek:

Whenever you flash a new ROM, you should be doing it from the tri-color SPL screen and it should like this:

http://forum.xda-developers.com/attachment.php?attachmentid=228997&stc=1&d=1253253120

^^^ NOTE the part where is says SPL-3.20.Olipro

If you are not (or it shows a different version of SPL) you should follow the guide to installing Hard-SPL (http://forum.xda-developers.com/showthread.php?p=4550954#post4550954).

Hope you are enjoying your new phone! :D

[Johnno]

Hi, Thanks for the instructions for burning ROMs.
Is there a reverse way of extracting a ROM from a HTC upgraded Trinity using SPL?
I have looked at the wiki and can't seem to find the right thread.
Mine has been upgraded to a HTC Touch Dual ROM wm6.1 by HTC and I would like to flash it to another Trinity.
Thanks and your work is greatly appreciated by a Newbie.

Johnno

[the.decoy]

Hi, Thanks for the instructions for burning ROMs.
Is there a reverse way of extracting a ROM from a HTC upgraded Trinity using SPL?
I have looked at the wiki and can't seem to find the right thread.


Well in theory, this is the guide you need (though I haven't done it myself) ...

http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

^^^ Yes that is a guide for Hermes, but according to the Trinity wiki page it will work on Trin too.

That guide _should_ get you to the point where you have dumped a "raw" image file of your devices rom. Then there are other tools available to process that raw into a file structure and/or NBH file (for flashing). There is a function in the ervius kitchen that is labelled RAW2NBH so that might help.


Mine has been upgraded to a HTC Touch Dual ROM wm6.1 by HTC and I would like to flash it to another Trinity.


So your Trinity has this HTC 6.1 rom on it?
If so that would be great for harvesting a potentially newer OEM xip for our Trinity/P3600i kitchens :D

If you manage to get the raw image file(s) then I am happy to help you try to extract the rom from it.

[invisib13]

Well in theory, this is the guide you need (though I haven't done it myself) ...

http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

^^^ Yes that is a guide for Hermes, but according to the Trinity wiki page it will work on Trin too.

That guide _should_ get you to the point where you have dumped a "raw" image file of your devices rom. Then there are other tools available to process that raw into a file structure and/or NBH file (for flashing). There is a function in the ervius kitchen that is labelled RAW2NBH so that might help.



So your Trinity has this HTC 6.1 rom on it?
If so that would be great for harvesting a potentially newer OEM xip for our Trinity/P3600i kitchens :D

If you manage to get the raw image file(s) then I am happy to help you try to extract the rom from it.

sorry if i ask a stupid question... what is kitchens for?..

this my first time to flash my p3600i...also search which ROM is better for normal user but fast

[the.decoy]

sorry if i ask a stupid question... what is kitchens for?..

A "kitchen" is the XDA-Dev term for the ROM-compiler software we use to "cook" the custom ROMs with ;)

Essentially they are a bundle of various utilities for building a Windows Mobile OS using the files extracted from other (newer) official builds of WM (extratced from newer phones/pdas).

this my first time to flash my p3600i...also search which ROM is better for normal user but fast

Just browse through the P3600i ROM threads in this section (Trinity ROM dev) and see what is popular. Remember that you need a P3600i rom not a Trinity rom.

MAKE SURE you have first installed the HardSPL bootloader onto your P3600i before you go flashing any ROMs (check the last page of the P3600i Flashing Tutorial, I have rebuilt the guide).

Enjoy! :)

[invisib13]

thanks fo info....

lot of choice i thing.... :confused:

i want try this ROM first >> WWE_21900_SP1_6IEQMTIT2_P3600I..

hope fine..

[the.decoy]

Latest COM3 build (23060) is now available in my kitchen/rom thread. :)

http://forum.xda-developers.com/showthread.php?t=531661

[invisib13]

thankz decoy...

i just flash ur COM3 build (23060) to my p3600i..

new look to me ( before i'm using w5.0 )...

and

how to re-install back my software exp garmin ect ( all old program & game on storage card ) & create shortcut to my all game?.....

tq

[the.decoy]

NOTE: Due to some major changes in the way I fixed the "GWES PushButton" issue in 23060, I am re-packaging the kitchen and all the ROMs.

I will update the links on my kitchen thread in the next few hours.

Apologies to everyone for the inconvenience of downloading it twice :o

thankz decoy...

i just flash ur COM3 build (23060) to my p3600i..

new look to me ( before i'm using w5.0 )...


Yes, sorry about that. It is a leftover from the Titanium Weather setup. There is just a shortcut to MortScript in the "\Windows\Startup" folder which is only needed once (to register support for MortScript programs). You can delete it manually to make the msg go away.

Theoretically it is supposed to remove itself after that first run but often it doesn't. I am currently looking at other options for registering Mortscript in the OS so that it does only run the once (on first boot).

and

how to re-install back my software exp garmin ect ( all old program & game on storage card ) & create shortcut to my all game?.....

tq

Any software that isn't in the rom will need to be re-installed from cab files (assuming you have them).

If the storage card is the one that came from garmin, you may find that cab file in a "2577" folder (which is intended to make it auto-install when you plug the card in while the phone is on).

If you find the cabs you can run them from Explorer. Likewise, if you think the games on the card just need a shortcut, you can do that with explorer too (Menu->Edit->"Copy" the exe then Menu->Edit->"Paste ShortCut" in \Windows\Start Menu\ folder)

[invisib13]

NOTE: Due to some major changes in the way I fixed the "GWES PushButton" issue in 23060, I am re-packaging the kitchen and all the ROMs.

I will update the links on my kitchen thread in the next few hours.

Apologies to everyone for the inconvenience of downloading it twice :o



Yes, sorry about that. It is a leftover from the Titanium Weather setup. There is just a shortcut to MortScript in the "\Windows\Startup" folder which is only needed once (to register support for MortScript programs). You can delete it manually to make the msg go away.

Theoretically it is supposed to remove itself after that first run but often it doesn't. I am currently looking at other options for registering Mortscript in the OS so that it does only run the once (on first boot).



Any software that isn't in the rom will need to be re-installed from cab files (assuming you have them).

If the storage card is the one that came from garmin, you may find that cab file in a "2577" folder (which is intended to make it auto-install when you plug the card in while the phone is on).

If you find the cabs you can run them from Explorer. Likewise, if you think the games on the card just need a shortcut, you can do that with explorer too (Menu->Edit->"Copy" the exe then Menu->Edit->"Paste ShortCut" in \Windows\Start Menu\ folder)

thank fo that info....

i thing i need ti install back my garmin... on my 2577 folder just have sprite backup only.. hehehe..

i'm wating new rom due to GWES PushButton issue..

thanks

[the.decoy]

thank fo that info....

i thing i need ti install back my garmin... on my 2577 folder just have sprite backup only.. hehehe..

i'm wating new rom due to GWES PushButton issue..

thanks

Do you have a CD or something from Garmin? You will need either the CAB file to install on the device or an EXE that is intended to be installed from Windows PC (through ActiveSync).

New ROM not far away, I am just doing some test builds/flashes of it right now :D

[invisib13]

yes i have software for garmin... borow from my friend... hehehe


-----------------
Garmin xt now already on my pda but sometime when run Garmin XT this error come out " The system is low on memory. Please free some memory and restart the aplication ".. after reset or run cleanRAM that problem setel...
somethime error "low memory" appear when i want to running comMgr or surf internet ( web using flash )

[the.decoy]

Uploads are finished.

New and improved 23060 Kitchen & ROMs available on First Post of my thread (http://forum.xda-developers.com/showthread.php?t=531661)

@invisib13
Make sure you are using a non-Manila ROM (6IETIT or 8IETIT) and remember to kill apps that are "closed" by tapping on the clock in the far top right corner of screen (gives an open app list with X buttons). It will also show you exactly how much free mem you have.

Use "Hibernate" (in Tools) as well as cleanRAM (they free up different things) to scavenge lost memory if you're still short you can even temporarily disable CHome in Settings->Personal->Home->Today Items (it is called "Windows Default")

Also, I am soon going to try and cook a very lean rom (asap) that will drop a bit of functionality in favour of even more free ram ... but not tonight (very sleepy now) :p

[invisib13]

Uploads are finished.

New and improved 23060 Kitchen & ROMs available on First Post of my thread (http://forum.xda-developers.com/showthread.php?t=531661)

@invisib13
Make sure you are using a non-Manila ROM (6IETIT or 8IETIT) and remember to kill apps that are "closed" by tapping on the clock in the far top right corner of screen (gives an open app list with X buttons). It will also show you exactly how much free mem you have.



thankz...

i will flash again with new ROM and using non-Manila ROM..


-----------------

flash new rom 8IETIT (23060)..
some diffrent but sometime stil have low memory... around 74% memory used.. hehehe.. but this rom i thing stabil fpr mu p3600i

[the.decoy]

flash new rom 8IETIT (23060)..
some diffrent but sometime stil have low memory... around 74% memory used.. hehehe.. but this rom i thing stabil fpr mu p3600i

Sorry but 74% is actually not bad for a 6.5 rom (with Titanium running) ... if you really need more than that to run Garmin I think you are going to need to use a rom with no Today screen UI (i.e. no Titanium or Manilla) at all.

However, SuperSport and I are trying to come up with such a rom (maybe using the old HTC Home Plugin) for the people who really need like 20MB of free ram. Might take another week to get that up though as I have to get my Trinity kitchen sorted out first.

In the meantime, to get the most memory possibly available for trying to run Garmin, try this:
1) Disable Titanium (go to Settings->Personal->Home->Today Items, disable "Windows Default")
2) SoftReset (in Start Menu -> Utility -> psShutXP )
3) Start Garmin

I will post back here when we get that uber-lite rom ready to test.

[invisib13]

In the meantime, to get the most memory possibly available for trying to run Garmin, try this:
1) Disable Titanium (go to Settings->Personal->Home->Today Items, disable "Windows Default")
2) SoftReset (in Start Menu -> Utility -> psShutXP )
3) Start Garmin

I will post back here when we get that uber-lite rom ready to test.


thankz for that info... at meantime i try this step if cannot run garmin...
after reset my phone using about 65% ... i thing this problem nOt to biG for me...

gOt error with 8IETIT ROM.. cannot launch HTCalbum & AudioManager

[Johnno]

Well in theory, this is the guide you need (though I haven't done it myself) ...

http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

^^^ Yes that is a guide for Hermes, but according to the Trinity wiki page it will work on Trin too.

That guide _should_ get you to the point where you have dumped a "raw" image file of your devices rom. Then there are other tools available to process that raw into a file structure and/or NBH file (for flashing). There is a function in the ervius kitchen that is labelled RAW2NBH so that might help.



So your Trinity has this HTC 6.1 rom on it?
If so that would be great for harvesting a potentially newer OEM xip for our Trinity/P3600i kitchens :D

If you manage to get the raw image file(s) then I am happy to help you try to extract the rom from it.

Thanks The.Decoy,
I have dumped the partitions, 00,01,02, and 03. The 03 Partition is 0 bytes and 167 Meg in size.
For all intents and purposes I suspect that 03 is the empty partition for user space.
I might be wrong.
I have RAR'd them all with screen captures so that you can get some idea of the version.
I would appreciate if you could extract the ROM from it.
Where can I upload it to? Can you PM me and keep me posted with how you get on?

Thanks
Johnno

[the.decoy]

Thanks The.Decoy,
I have dumped the partitions, 00,01,02, and 03. The 03 Partition is 0 bytes and 167 Meg in size.
For all intents and purposes I suspect that 03 is the empty partition for user space.
I might be wrong.
I have RAR'd them all with screen captures so that you can get some idea of the version.
I would appreciate if you could extract the ROM from it.
Where can I upload it to? Can you PM me and keep me posted with how you get on?

Thanks
Johnno

That's great. Just create an account at mediafire or rapidshare (or 4shared) and upload them there.

Thanks!

[Johnno]

Hi The.Decoy,
here is the link for the RAW files:
http://rapidshare.com/files/298029001/Trinity_HTC_3600i_WM_6.1_RAW_Files.rar
Good luck and please keep me posted if they are usable.
Johnno

[Johnno]

That's great. Just create an account at mediafire or rapidshare (or 4shared) and upload them there.

Thanks!
Hi the.decoy,
http://rapidshare.com/files/298029001/Trinity_HTC_3600i_WM_6.1_RAW_Files.rar
please let me know if they are usable and where the extracted files are.

[the.decoy]

Hi Johnno,

Hi the.decoy,
http://rapidshare.com/files/298029001/Trinity_HTC_3600i_WM_6.1_RAW_Files.rar
please let me know if they are usable and where the extracted files are.

The files are probably ok (although in hindsight I realised that if all you wanted was NBH rom file that you could re-image the device with, then extracting the partitions to *.nb files would have made that a very simple job for me to do).

Anyway, I digress ... the main reason I am posting is to ask if you really want me to still bother because I can already see from the screenshots you took that this ROM is not an official HTC rom anyway

See here vvvv

http://forum.xda-developers.com/attachment.php?attachmentid=240950&stc=1&d=1256616028 http://forum.xda-developers.com/attachment.php?attachmentid=240951&stc=1&d=1256616028

That is just a cooked ROM (WM6.1 build 22222) from this very forum:
[ROM][WWE][30.10.2008]Karmba_a Diamond Blue For Trinity v Last (http://forum.xda-developers.com/showthread.php?t=404208)

Admittedly it must have been hex-hacked and maybe even NK modified to suit P3600i instead of Trinity (but you can do that very easily using the mod_i tool by NoseDive).

Was it really HTC that did this upgrade for you??? or was that what the previous owner said or something? hehehe I would very flattered if HTC actually went and put one of my ROMs onto a customers phone :D

Anyway, if you want to put this ROM onto another Trinity (is it a Trinity or a P3600i ?) then I suggest just downloading it from that forum thread. (and run mod_i on the NBH file if you are putting it on a p3600i)

Or even check out what other WM6.1 ROMs are available. Frankly I think that there would be plenty of them that would out-perform a 22222 build rom that have been released since last year when Karmba_a released that one.

As always I must STRESS ...

INSTALL HardSPL FIRST!

Do not pass go ... do not collect $200 :p ... go directly to P3600i Flashing Tutorial (http://forum.xda-developers.com/showthread.php?p=4550781#post4550781) and make sure you don't brick that thing before you go any further :)

[Johnno]

Thanks the.decoy.
Yeah it was a HTC authorised repairer who did this in Australia!
Must have been pretty desperate to deviate from HTC stock!
Then again, I did give them a curly hardware problem that they thought they could solve with a software upgrade!! duh!
On that note, I reckon that congratulations all round to the folks at XDA-Dev is in order for the obvious good work thast has been done!
Thanks for identifying the build, I thought it looked sus with the Karmba_a tag but I too thought that it was too good to be true.
Well there you are.
Thanks for all your help, I am still learning and please don't bother extracting the ROM on my account.

Cheers again
Johnno

[the.decoy]

Thanks the.decoy.
Yeah it was a HTC authorised repairer who did this in Australia!
Must have been pretty desperate to deviate from HTC stock!
Then again, I did give them a curly hardware problem that they thought they could solve with a software upgrade!! duh!
On that note, I reckon that congratulations all round to the folks at XDA-Dev is in order for the obvious good work thast has been done!


No worries mate :)

Yeah that is pretty damn cool of them to put an XDA-Dev rom on there. :D

Make sure you don't mention it to HTC or Tel$tra ... I would hate to see them get in trouble for doing that on the sly ;)

But yeah ... have a look at some of the more recent WM6.1 Trinity roms if you want to setup another Trinity phone
(BTW that home interface you have on there is called M2D / Manilla so if you wanted it on another rom you will need to make sure it has that loaded ... although it is know to make TRIN's run really slow cos its a memory hog)

Hey ... what was your obscure hardware problem anyway?

[Johnno]

The "obscure hardware problem" was a disconnection at the external antenna connection from the internal antenna.
Basically the phone had no reception at all until an external antenna was connected!
Bricked as a phone unless you want to have it permanantly connected to an external antenna!
Nice use for TomTom!!
I think that using an external antenna somehow stressed the main pcb at the connector creating the problem.
I would have logically thought that it would have gone the other way and disconnected the functionality of the external antenna!
But hey, stranger things do happen.
I will have a look at better ROMs to put on it first so that I don't brick my second and working Trinity.

[mudmaps]

Guys - I love the ROM and with one exception - the "clock" feature is wrong in both versions lists on P1 of this forum.

I live in Queensland Australia which does NOT enjoy daylight saving time in summer (unlike all other east coast states). The ROM however shows a DST rather than a non-DST during summer. I need to set my timezone on Vladivostock to correct.

Hope you can have a look at this one.

cheers

[Johnno]

Guys - I love the ROM and with one exception - the "clock" feature is wrong in both versions lists on P1 of this forum.

I live in Queensland Australia which does NOT enjoy daylight saving time in summer (unlike all other east coast states). The ROM however shows a DST rather than a non-DST during summer. I need to set my timezone on Vladivostock to correct.

Hope you can have a look at this one.

cheers

Hi mudmaps,
I am not sure if the ROM had Brisbane as an option but if it did you might want to make sure that you have the Daylight Saving update for 2009 installed.
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=3bd7c55c-8ac1-4821-81fe-3f4ada831fe0
It says that was for 2008 but it also updated correctly for me after it installed for the early DST in the ACT this year.

[Smtbruce]

.

> NOOBs:


There are instructions which should get you started in no time, ready to test ROMs. :) The whole process to getting ready to use ROMs might take 30-40 minutes for a noob.
IF YOU CBF READING THE INSTRUCTIONS AND SPENDING 30 MINUTES, PISS OFF. Instructions are HERE (http://forum.xda-developers.com/showthread.php?t=399827).



> WARNING BEFORE FLASHING:

While most people have not had any problems, a small but consistent number have reported lockups with various ROMs, requiring either soft or hard resets, depending on the conflicting program.
Have backups of your data, and be prepared that something you install might break the ROM you have installed.
UPDATE: It seems like lockups are possible even with (practically) nothing installed - while they do seem to be less likely the less you install, apparently there does not seem to be any P3600i immune to this issue, whether full of programs or not. Note that the newer ROMs seem to be more stable.




> ROMS (newest at bottom of list):
kkk
Generic (?) Bluetooth Fix: Possible fix for bluetooth issues with any ROM available when you tickle Mr. Smiley :) (http://www.mediafire.com/?l3kbhlagtgd)
kkk

kkk
WM 6.1:


Mary v3.7 (original thread (http://forum.xda-developers.com/showthread.php?t=369917)): Lite (http://www.mediafire.com/?g9idezjxczg) | SuperLite (http://www.mediafire.com/?zz2z9cinym4) | Lite, no TouchFlo (http://www.mediafire.com/?g1f3iydmt0h) (N.B. Possible conflict with S2U2 (only if you use this - most users should be fine))

PDAVIET v38 (original thread (http://www.pdaviet.net/showthread.php?t=28940)): Standard (http://www.mediafire.com/?els4m2czisz) (N.B. Problems with BT - patch for v37 does not work for this ROM)

Karmba_a v10.1 (original thread (http://forum.xda-developers.com/showthread.php?t=404208)): Diamond [fixed] (http://www.mediafire.com/?vnmnl02jcty) (N.B. Problems with BT)
PDAVIET v41 (original thread (http://forum.xda-developers.com/showthread.php?t=413005)): Standard (http://www.mediafire.com/?zgfmygkuvwg) (N.B. Problems with BT)
Karmba_a v10.2 (original thread (http://forum.xda-developers.com/showthread.php?t=404208)): Diamond (http://www.mediafire.com/?fm1abkrw8ai) (N.B. Problems with BT)
31XiTNY (original thread (http://forum.xda-developers.com/showthread.php?t=414792)): STD (http://www.mediafire.com/?j3ofyc1ocz9) | BSN | SXY (http://www.mediafire.com/?tyk5ywz4el8)
FInixNOver v3.6 (original thread (http://forum.xda-developers.com/showthread.php?t=425506)): Normal (http://www.mediafire.com/?mugygmwyzdo) | Light (http://www.mediafire.com/?w0dzuzyqfow)
cmE v0.9 (beta) (original thread (http://forum.xda-developers.com/showthread.php?t=427532)): M2D (http://www.mediafire.com/?mnmzjgztqte)
n0610e (beta) (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?meud0fzokj0) | Light
n072e (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?znvdznwzlzh)
Team CV93+Oggi (17.01.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=472178)): Full, Vista, M2D (http://www.mediafire.com/?zmmzt1nqebz) | Full, DiamondRed, M2D | Medium | Lite | Ultra Lite (N.B. Copy contents of "postinstall" folder to memory card before flashing)

n073e (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?noznbzgmyjm)
Team CV93+Oggi (13.02.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=472178)): M2D, Full (http://www.mediafire.com/?knyhlo11zmh) | M2D, Lite (http://www.mediafire.com/?wnifittjjmx) | Medium (http://www.mediafire.com/?gemjzfmnjmn) | Lite (http://www.mediafire.com/?jd2yk1mnmoo) (N.B. Copy contents of "postinstall" folder to memory card before flashing)
FInixNOver v3.7.1 (original thread (http://forum.xda-developers.com/showthread.php?t=489029)): M2D (http://www.mediafire.com/?jheemxymnj5) | Normal (http://www.mediafire.com/?w22zbzkajyo) | Light (http://www.mediafire.com/?zm0kzgnynjz)
FInixNOver v3.7.2 (original thread (http://forum.xda-developers.com/showthread.php?t=489029)): M2D (http://www.mediafire.com/?dmnmujnnof0) | Normal (http://www.mediafire.com/?vjtyzz0yttm)

.
WM 6.5 (beta builds - slower and memory hungry):

Team CV93+Oggi (11.04.2009) (original thread (http://forum.xda-developers.com/showthread.php?p=3606624#post3606624)): Full (http://www.mediafire.com/?iyqkxzzwyni) | Lite (http://www.mediafire.com/?kgjmmnyzzjd) (N.B. Ported from CHS WM 6.5 21500.5.0.0 - 2 versions: Lite and Full "only with IE6 without widgets") (N.B.2. Copy contents of "postinstall" folder to memory card before flashing)

Team CV93+Oggi (25.06.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=531661)): Kitchen (http://www.mediafire.com/?lmn3n5izwjn) | UltraLite (http://www.mediafire.com/?c0hmrmjy2tz) | Full QuickMenu + Titanium (http://www.mediafire.com/?mm4yzzdiyzl) | Full M2D + Titanium (http://www.mediafire.com/?yni2izjfmzi) | HomescreenUI M2D (http://www.mediafire.com/?y33mnynynyu) (N.B. Ported from CHS WM 6.5 21900.5.0.20)

Team CV93+Oggi (09.07.2009) (original thread (http://forum.xda-developers.com/showthread.php?p=4047768)): Kitchen (http://www.mediafire.com/?gyiykmwwiie) | UltraLite (http://www.mediafire.com/?zmj4ryrmnht) | Full QuickMenu + Titanium (http://www.mediafire.com/?ojyg2ianzdw) | Full M2D + Titanium (http://www.mediafire.com/?vhm2mleewl2) | HomescreenUI M2D (http://www.mediafire.com/?bzyermmxmdr) (N.B. Ported from CHS WM 6.5 21900.5.0.20)

lll
lll
lll
> HOW TO MODIFY (HEX EDIT) A ROM FOR THE P3600i:


This is actually quite easy, and takes all of 30 seconds (literally).


Please note that not all ROMs will work using this method (and thus they will never be able to run on the P3600i).



Download HxD (http://mh-nexus.de/en/) and install.
Download the ROM you would like to modify.
Open RUU_signed.nbh in HxD
You will see a whole bunch of numbers. Look for a number 04 all by itself, usually (but not always) on the 6th or 7th line (offset 00000060).
Change the 00 in front of the 04 to 01, so that the numbers will now read 01 04. Below are two examples (each from a different ROM):

http://i273.photobucket.com/albums/jj227/joncgde2/hexeditpictureforxdadevguide.jpg



Click the save button and exit HxD. HxD makes a backup file (in this case it will be RUU_signed.bak) - delete this, since it is not needed.
Test it out!
If the ROM boots to the today screen (and does not get stuck on the boot screen), upload the ROM and submit details so I can add it to the list. Instructions are below.







.
dear sir.,
I have one question to you., and sorry for my poor knowledge in the PPC field.,
what diffirence between ROM & Kitchen??
I tried to flash some specific rom for my trinity., but, I nited there some roms showed
ROM+KITCHEN -- Shall I flash both ??

[.:manelito:.]

Hello there.
I dnt know if is here that i can ask this, but sry if is not.

i bought one trinity a few days and search for many software and others for it, and just here i found something really usefull, i already try the cokked rom wm5.0 modifyed one, now i have 6.0 with spmobile shell 3.5 and some progs and games, so i really sow thar here is the best forum of all's.

But i needed some answers or some hellp.
I dnt like to use the pen, so i saw that only the em6.5 and all that a need to dont use the pen, and i want it, But is there some rom for me in portugueses language?
what the best rom and late one?

Thanks for all that can help me.
:D:confused:

[Qamarzamsyawal]

Succesfully flash wm6.5 roms on my P3600i.
Now running memory 51.17MB.The standard roms only provide 48.93MB RAM.GodBless!!!
Only one problem.. it has GPS Tool 7 it slows down my Garmin Mobile XT Navigation software. The receiver is way to slow to acquire the signals.
I don't know how to solve it pleaseeeee help:)

[the.decoy]

Succesfully flash wm6.5 roms on my P3600i.
Now running memory 51.17MB.The standard roms only provide 48.93MB RAM.GodBless!!!
Only one problem.. it has GPS Tool 7 it slows down my Garmin Mobile XT Navigation software. The receiver is way to slow to acquire the signals.
I don't know how to solve it pleaseeeee help:)

GPS receiver issues are usually more to do with the version of Radio ROM you are runningg.

Did you update your Radio ROM something in all this?

PS: I am glad you got a 6.5 rom flashed successfully :)

[Qamarzamsyawal]

GPS receiver issues are usually more to do with the version of Radio ROM you are runningg.

Did you update your Radio ROM something in all this?

PS: I am glad you got a 6.5 rom flashed successfully :)

Thanks to you..
Yeah i did upgrade my radio as u instructed b4.
Rom Version-21725i
Radio Version-1.56.70.11
HARD SPL-OLIPRO 3.20
IPL-1.00
WWE_21900_SP1_6IEULITE_P3600I
Is there anything missing??

[Qamarzamsyawal]

Well I am still running on 21500 and have had no Hard resets at all since the first flash......that would be....a while now. This is the longest of any cooked Roms with no problems.
Admittedly I no longer run Tomtom on the P3600i as we both have dedicated GPS units now so it really doesn't get too hard a life....but I am pretty happy with it.
I haven't flashed the newer Rom yet as I am running Windows 7 and I need to get around to setting up Vitual XP to see if I can install activesync there and flash through that. Win 7 doesn't like to play when trying to flash Roms.

yeah me too..been running 21500 & 21900 & it seems fine.I use the 21900IE6_Lite for 2 weeks no issue except the direct push mail.It work well after installing windows Live cab.Now trying the n073e.
P3600i
n073e
HardSPL
Olipro 3.2