[REF] P3600i ROM Collection (Updated: 26 July)

[joncgde2]

.

> NOOBs:


There are instructions which should get you started in no time, ready to test ROMs. :) The whole process to getting ready to use ROMs might take 30-40 minutes for a noob.
IF YOU CBF READING THE INSTRUCTIONS AND SPENDING 30 MINUTES, PISS OFF. Instructions are HERE (http://forum.xda-developers.com/showthread.php?t=399827).



> WARNING BEFORE FLASHING:

While most people have not had any problems, a small but consistent number have reported lockups with various ROMs, requiring either soft or hard resets, depending on the conflicting program.
Have backups of your data, and be prepared that something you install might break the ROM you have installed.
UPDATE: It seems like lockups are possible even with (practically) nothing installed - while they do seem to be less likely the less you install, apparently there does not seem to be any P3600i immune to this issue, whether full of programs or not. Note that the newer ROMs seem to be more stable.




> ROMS (newest at bottom of list):
kkk
Generic (?) Bluetooth Fix: Possible fix for bluetooth issues with any ROM available when you tickle Mr. Smiley :) (http://www.mediafire.com/?l3kbhlagtgd)
kkk

kkk
WM 6.1:


Mary v3.7 (original thread (http://forum.xda-developers.com/showthread.php?t=369917)): Lite (http://www.mediafire.com/?g9idezjxczg) | SuperLite (http://www.mediafire.com/?zz2z9cinym4) | Lite, no TouchFlo (http://www.mediafire.com/?g1f3iydmt0h) (N.B. Possible conflict with S2U2 (only if you use this - most users should be fine))

PDAVIET v38 (original thread (http://www.pdaviet.net/showthread.php?t=28940)): Standard (http://www.mediafire.com/?els4m2czisz) (N.B. Problems with BT - patch for v37 does not work for this ROM)

Karmba_a v10.1 (original thread (http://forum.xda-developers.com/showthread.php?t=404208)): Diamond [fixed] (http://www.mediafire.com/?vnmnl02jcty) (N.B. Problems with BT)
PDAVIET v41 (original thread (http://forum.xda-developers.com/showthread.php?t=413005)): Standard (http://www.mediafire.com/?zgfmygkuvwg) (N.B. Problems with BT)
Karmba_a v10.2 (original thread (http://forum.xda-developers.com/showthread.php?t=404208)): Diamond (http://www.mediafire.com/?fm1abkrw8ai) (N.B. Problems with BT)
31XiTNY (original thread (http://forum.xda-developers.com/showthread.php?t=414792)): STD (http://www.mediafire.com/?j3ofyc1ocz9) | BSN | SXY (http://www.mediafire.com/?tyk5ywz4el8)
FInixNOver v3.6 (original thread (http://forum.xda-developers.com/showthread.php?t=425506)): Normal (http://www.mediafire.com/?mugygmwyzdo) | Light (http://www.mediafire.com/?w0dzuzyqfow)
cmE v0.9 (beta) (original thread (http://forum.xda-developers.com/showthread.php?t=427532)): M2D (http://www.mediafire.com/?mnmzjgztqte)
n0610e (beta) (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?meud0fzokj0) | Light
n072e (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?znvdznwzlzh)
Team CV93+Oggi (17.01.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=472178)): Full, Vista, M2D (http://www.mediafire.com/?zmmzt1nqebz) | Full, DiamondRed, M2D | Medium | Lite | Ultra Lite (N.B. Copy contents of "postinstall" folder to memory card before flashing)

n073e (original thread (http://forum.xda-developers.com/showthread.php?t=430016)): M2D (http://www.mediafire.com/?noznbzgmyjm)
Team CV93+Oggi (13.02.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=472178)): M2D, Full (http://www.mediafire.com/?knyhlo11zmh) | M2D, Lite (http://www.mediafire.com/?wnifittjjmx) | Medium (http://www.mediafire.com/?gemjzfmnjmn) | Lite (http://www.mediafire.com/?jd2yk1mnmoo) (N.B. Copy contents of "postinstall" folder to memory card before flashing)
FInixNOver v3.7.1 (original thread (http://forum.xda-developers.com/showthread.php?t=489029)): M2D (http://www.mediafire.com/?jheemxymnj5) | Normal (http://www.mediafire.com/?w22zbzkajyo) | Light (http://www.mediafire.com/?zm0kzgnynjz)
FInixNOver v3.7.2 (original thread (http://forum.xda-developers.com/showthread.php?t=489029)): M2D (http://www.mediafire.com/?dmnmujnnof0) | Normal (http://www.mediafire.com/?vjtyzz0yttm)

.
WM 6.5 (beta builds - slower and memory hungry):

Team CV93+Oggi (11.04.2009) (original thread (http://forum.xda-developers.com/showthread.php?p=3606624#post3606624)): Full (http://www.mediafire.com/?iyqkxzzwyni) | Lite (http://www.mediafire.com/?kgjmmnyzzjd) (N.B. Ported from CHS WM 6.5 21500.5.0.0 - 2 versions: Lite and Full "only with IE6 without widgets") (N.B.2. Copy contents of "postinstall" folder to memory card before flashing)

Team CV93+Oggi (25.06.2009) (original thread (http://forum.xda-developers.com/showthread.php?t=531661)): Kitchen (http://www.mediafire.com/?lmn3n5izwjn) | UltraLite (http://www.mediafire.com/?c0hmrmjy2tz) | Full QuickMenu + Titanium (http://www.mediafire.com/?mm4yzzdiyzl) | Full M2D + Titanium (http://www.mediafire.com/?yni2izjfmzi) | HomescreenUI M2D (http://www.mediafire.com/?y33mnynynyu) (N.B. Ported from CHS WM 6.5 21900.5.0.20)

Team CV93+Oggi (09.07.2009) (original thread (http://forum.xda-developers.com/showthread.php?p=4047768)): Kitchen (http://www.mediafire.com/?gyiykmwwiie) | UltraLite (http://www.mediafire.com/?zmj4ryrmnht) | Full QuickMenu + Titanium (http://www.mediafire.com/?ojyg2ianzdw) | Full M2D + Titanium (http://www.mediafire.com/?vhm2mleewl2) | HomescreenUI M2D (http://www.mediafire.com/?bzyermmxmdr) (N.B. Ported from CHS WM 6.5 21900.5.0.20)

lll
lll
lll
> HOW TO MODIFY (HEX EDIT) A ROM FOR THE P3600i:


This is actually quite easy, and takes all of 30 seconds (literally).


Please note that not all ROMs will work using this method (and thus they will never be able to run on the P3600i).



Download HxD (http://mh-nexus.de/en/) and install.
Download the ROM you would like to modify.
Open RUU_signed.nbh in HxD
You will see a whole bunch of numbers. Look for a number 04 all by itself, usually (but not always) on the 6th or 7th line (offset 00000060).
Change the 00 in front of the 04 to 01, so that the numbers will now read 01 04. Below are two examples (each from a different ROM):

http://i273.photobucket.com/albums/jj227/joncgde2/hexeditpictureforxdadevguide.jpg



Click the save button and exit HxD. HxD makes a backup file (in this case it will be RUU_signed.bak) - delete this, since it is not needed.
Test it out!
If the ROM boots to the today screen (and does not get stuck on the boot screen), upload the ROM and submit details so I can add it to the list. Instructions are below.







.

[amanx]

OK to keep it short, things have become a mess lately with all the successes and failures of flashing the phone. To keep everything neat and tidy I thought I would create this thread so that ALL P3600i ROMs that have been tested and work can be housed in one nice place for everyone to see, instead of trawling through heaps of threads.


I will maintain this first post and keep updates of all ROMs that are made available for the P3600i.


After ajajaj's success with Mary v3.7 Lite, I also got the SuperLite variant working without any issues, it gives 28MB free (with nothing loaded of course :p) but might be something a few of you might like... so here you go :)


NOTE: don't upload to rapidshare cos it really is shithouse... use mediafire



[P3600i] Mary v3.7 (CE OS 5.2.19199 bld 199199.1.0.0) - Lite (http://rapidshare.com/files/121817898/Trinitin_-p3600i-Working_Mary-wwe-wm6.1.rar.html) - thanks to ajajaj

[P3600i] Mary v3.7 (CE OS 5.2.19199 bld 199199.1.0.0) - SuperLite (http://www.mediafire.com/?nxy9ndbbgx1) - thanks to joncgde2

mary v1.7.1 lite for p3600i http://www.mediafire.com/?xxnzgngsjec

[joncgde2]

thanks mate, list updated :)

[gallevy]

Hi,
How i do the rom flash?
Thanks

[nealed]

Hi,
How i do the rom flash?
Thanks

If noone has replied it's because the anser is in the first post and asking that question two posts later means that you probably didn't read enough.

[Andych]

I am now running Mary lite (no touchflo) but find I cannot sync to my Outlook.
Other than that it is really quick and immediately after boot I have 30 meg free Operating.....very impressive....now if only I can get the bloody thing to sync.

[Argyle0297]

Does anyone tried RUU_TRINITY_WM6.1_WWE_ASIA_3.13.YK.P3600i.rar? I found it in ftp://yaka88.com/.

[Andych]

Does anyone tried RUU_TRINITY_WM6.1_WWE_ASIA_3.13.YK.P3600i.rar? I found it in ftp://yaka88.com/.

A few tried it and while it flashed OK it hung at the boot screen.
Feel welcome to try it and report back...you might get lucky.

[amanx]

A few tried it and while it flashed OK it hung at the boot screen.
Feel welcome to try it and report back...you might get lucky.

tried
not work

[kane81]

PDAVIET v37 has not link... goes to http://xxx

[joncgde2]

yeh just waiting for this piece of shit to upload before i update the link... so slow :p


EDIT: link updated... enjoy! and remember to read the original thread... seems to be a problem with pairing using bluetooth...

.

[amanx]

Rom can work
RUU_TRINITY_WM6.1_WWE_ASIA_3.11.YK.lite
PDAVIET_v32 <--this one no bt problem

[joncgde2]

well i don't know what's going on with you


i can't get yaka lite to work, and a lot of people are having trouble with it too

i redownloaded it just now and patched it... didn't work again


i also tried karmba_a's new rom... looks nice, but yeh... hangs on boot


in exactly a week, after my exams, i'll have time to take a deeper look at this... i've got a lead on how to resolve this :d just need some time now :(

hang tight sweethearts

[amanx]

well i don't know what's going on with you


i can't get yaka lite to work, and a lot of people are having trouble with it too

i redownloaded it just now and patched it... didn't work again


i also tried karmba_a's new rom... looks nice, but yeh... hangs on boot


in exactly a week, after my exams, i'll have time to take a deeper look at this... i've got a lead on how to resolve this :d just need some time now :(

hang tight sweethearts

RUU_TRINITY_WM6.1_WWE_ASIA_3.11.YK.lite <-- http://www.mediafire.com/?pnxe2ijyovb
PDAVIET_v32 <--this one no bt problem <-- http://www.mediafire.com/?jzmdlqvyb03

[joncgde2]

thanks for the links amanx, i'll try them out soon - can't right now cos i'm a lil busy exams and such


some questions though: the yaka lite ROM you posted is v3.11 - the one i tested was 3.12... maybe that's why mine didn't work


also your PDAVIET is v32... isn't that like 5 versions older than v37? do people still use old ROMs when newer ones are available? :p

hehe in any case i'll put them in the 1st post once someone else can confirm they are working, thanks for uploading them

also, can you give me links to the original threads? so people can look to the old threads for more info on the ROMs


cheers


jon

[Andych]

OK..after trying all day to find a fix to the BT problem I have given up. There are other issues with this ROM as well and I suspect they may all be Registry issues.
First one is that Advanced Configuration actually does nothing. You make changes yet they don't stay that way. I tried half a dozen times to "Not show SIM card contacts" yet it just wouldn't work.
I also tried to change the backlight settings so that when on External Power the backlight stayed on...yet it always defaults to turn off in 5 minutes, This means you cannot shange anything.

The good things...I love the Dialer, keyboard etc...all from the Touch Diamond I think.
Massive problem though with BT not being able to find other devices...no matter what settings or hard resests etc.

So I gave up and loaded PDAViet 3.2 and BT works...it seems like all the other little grips are OK...I will see how it goes over the next day or so as I am sick of re-flashing...lol
Never thought I would say that about my P3600i.

[amanx]

OK..after trying all day to find a fix to the BT problem I have given up. There are other issues with this ROM as well and I suspect they may all be Registry issues.
First one is that Advanced Configuration actually does nothing. You make changes yet they don't stay that way. I tried half a dozen times to "Not show SIM card contacts" yet it just wouldn't work.
I also tried to change the backlight settings so that when on External Power the backlight stayed on...yet it always defaults to turn off in 5 minutes, This means you cannot shange anything.

The good things...I love the Dialer, keyboard etc...all from the Touch Diamond I think.
Massive problem though with BT not being able to find other devices...no matter what settings or hard resests etc.

So I gave up and loaded PDAViet 3.2 and BT works...it seems like all the other little grips are OK...I will see how it goes over the next day or so as I am sick of re-flashing...lol
Never thought I would say that about my P3600i.



yaka ver3.11 work well on my mechine
smooth and hv good chinese support
unlucky, ver 3.12 can't work ><
really don't know what matter

PDAViet 3.2 also is a good rom, run faster than yaka
but no video call >< which i need to use
so i use yaka one lor ><

[gallevy]

The mary can read hebrew? Or if i will install the mui it will work? ive heard that cocked rom does problem with mui...
Thanks

[joncgde2]

The mary can read hebrew? Or if i will install the mui it will work? ive heard that cocked rom does problem with mui...
Thanks

try it and see ;)

[amanx]

yaka ver3.11 find one important problem
after i run it one day
it auto hang at the boot screen

after i reboot the phone
it auto hard reset
don' know what problem

new test:
PDAMobiz wm6.1 OS 5.2.19949Build19949.1.2.0 bySvmobile LITE <--not work
wm6.1_Elegance_2.14WWE <--not work

[Cyrus Kourosh]

Very nice initiative.
I have added your two links in the ROM collection thread ;)

[Argyle0297]

A few tried it and while it flashed OK it hung at the boot screen.
Feel welcome to try it and report back...you might get lucky.

RUU_TRINITY_WM6.1_WWE_ASIA_3.13.YK.P3600i <--- Not working just as you said.

[gallevy]

try it and see ;)

And if it didnt work I can go back to the original wwe rom?

[joncgde2]

Very nice initiative.
I have added your two links in the ROM collection thread ;)

cheers mate, that should make things a lot easier to find for all :-) hopefully we can eventually get our own P3600i subforum, hehe



And if it didnt work I can go back to the original wwe rom?

i don't see why not... just make sure you know of a ROM that DOES work... don't want to need to flash back and then find no ROMs that WILL flash on your device :p

but i know i've tested ROMs that haven't worked... and i've flashed back to working ones without any issues



Please note to anyone following this thread I'll be a bit slack over the next 5 days while exams wind up, so I won't be updating the 1st post or anything... but only for 5 days until my exams finish - after that I'll update everything and we can keep step up the challenge of getting all Trinity ROMs working :D

In the meantime, please keep reporting on ROMs you test that work and don't work... when at the end of the week I will update the thread with all the posts I see.

also, can you PLEASE post links to the original threads for the ROMs you report, either working or not.. that makes it much easier when I can link back to them for people to get more info

cheers


jon

[Andych]

Good luck with the Exams.....hopefully we will have more feedback on ROMs by the end of the week.

Cheers
Andy

[ajajaj]

I have noticed that the last 2 days, in the morning, my mary install re-initialises. as in does a memory wipe, forcing me to re-install everything.

anyone else experiencing this?

[amanx]

I have noticed that the last 2 days, in the morning, my mary install re-initialises. as in does a memory wipe, forcing me to re-install everything.

anyone else experiencing this?

is that sth like hard reset suddenly?

[ajajaj]

is that sth like hard reset suddenly?

not a reboot, but the same as if you just turned on phone for first time.

[ssamth2003]

is that sth like hard reset suddenly?

yeh..i have the same problem..its seem the phone got hang up and swip off all program i have installed.
2nd time its hang up and i cant even S/R (its not bring back still same prob) so i have to H/R

now i caome back to original WM6 only. :(

[Andych]

I have noticed that the last 2 days, in the morning, my mary install re-initialises. as in does a memory wipe, forcing me to re-install everything.

anyone else experiencing this?

I did find that with Mary Super Lite...although I thought it may have been due to a conflict with S2U2. Anyway I found it to be too lite for me so I tried PDAViet 3.7......good ROM but the BT issue killed it for me.
I am now on PDAViet 3.2 (since 9pm last night) and I have it configured the way I want. It runs Tomtom really well, S2U2 works...I haven't received any MMS yet (and I rarely send them) so I don't know if that works. I don't make Video calls so that isn't an issue for me. I have all my programs loaded on the device and still have 175.57 meg free Storage and 24.92 meg free for Program memory.
So far it is looking good.

[amanx]

yeh..i have the same problem..its seem the phone got hang up and swip off all program i have installed.
2nd time its hang up and i cant even S/R (its not bring back still same prob) so i have to H/R

now i caome back to original WM6 only. :(

i also go back to original wm6
sad...may be wait for new rom that fully suport p3600i ><

[Andych]

i also go back to original wm6
sad...may be wait for new rom that fully suport p3600i ><

You may end up waiting for a very long time then....all WM6.1 ROMs are ports from newer devices which are modified to suit the Trinity (P3600, D810 etc) and as there are a lot more of them than the P3600i that is the way they will be cooked.
As we have found there are certain WM6.1 builds which work and some don't. As we go through and find the better ones we will get to a point where we have a good stable ROM....until the next best thing comes along...lol.

Stick with it....note down what bugs or problems there are and lets see if amongst those in here who are much cleverer than me can come up with some fixes.

[Sturgeon]

After flashing my p3600i with the PDAViet ROM everything is looking good - apart from my email doesn't seem to work any more. Previously it was receiving email from the Three network every five minutes, now I can't get it to connect; it just says that "Messages cannot be downloaded to your mobile device".

I have checked my account settings and verified that i can connect to the internet via Planet 3.

Anyone else out there on the Three network having issues with this?

[Andych]

After flashing my p3600i with the PDAViet ROM everything is looking good - apart from my email doesn't seem to work any more. Previously it was receiving email from the Three network every five minutes, now I can't get it to connect; it just says that "Messages cannot be downloaded to your mobile device".

I have checked my account settings and verified that i can connect to the internet via Planet 3.

Anyone else out there on the Three network having issues with this?

Sorry...I am with 3 but I don't bother getting my e-mail onto the phone these days. I have enough coming in on my work Blackberry so more on my P3600i would just be a pain.
Which PDAViet ROM did you flash? If it is 3.7, try version 3.2 I am finding it to be much better....apart from a few minor problems.

[Sturgeon]

Sorry, my problem - overlooked one of the settings. All is now running OK with PDAViet 3.7

[Andych]

Sorry, my problem - overlooked one of the settings. All is now running OK with PDAViet 3.7

Are you able to connect to Bluetooth with PDAViet 3.7? For the life of me mine would not find any devices.

[raf1987]

Does the original WM6 rom (http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe) for P3600 also worked for P3600i so in case the upgrade is not successful, I can go back to the original WM6?

[Andych]

Does the original WM6 rom (http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe) for P3600 also worked for P3600i so in case the upgrade is not successful, I can go back to the original WM6?

Yes it does...that version was the only one on the HTC site for Dopod D810 and HTC P3600i

[Sturgeon]

Are you able to connect to Bluetooth with PDAViet 3.7? For the life of me mine would not find any devices.

No, I've tried a few things but it just doesn't work. I don't really use bt though so it's not really an issue for me (yet)

[Andych]

No, I've tried a few things but it just doesn't work. I don't really use bt though so it's not really an issue for me (yet)

Unfortunately I need to have it. The PDAViet 3.2 is also a pretty good ROM, for what I do I am not sure if either of them is faster than the other so I am quite happy so far.

[barvaz_t]

Hey guys

I've also encountered several problems using the MARY rom,
but when I've installed the MARY super lite, all the problems seemed to vanish.

I'm working with this rom for about a week, and i must say it's very very fast and stable. no hard-reset issues whatsoever and no BT problems that i can put my finger on...

Cheers,
Tomer

[gallevy]

Hey guys

I've also encountered several problems using the MARY rom,
but when I've installed the MARY super lite, all the problems seemed to vanish.

I'm working with this rom for about a week, and i must say it's very very fast and stable. no hard-reset issues whatsoever and no BT problems that i can put my finger on...

Cheers,
Tomer

Tomer you install hebrew on the device? I have licence for pdac...
בקיצר אחי עובד העברית? ברום הזה?

[jarusa]

http://rapidshare.com/files/123040430/Trinity_P3600i_WM6.1_OS_19199_WWE_Mary371based_PDA MobizCustomized.rar.html

:)

[joncgde2]

i have to say i've been running mary super lite for about 3-4 days now with no issues, no soft resets or hangs or anything

and there's always around 28MB free RAM which is quite good, when i have nothing else open

@jarusa: can you please give us some info on this? like a proper name, and possibly a link to the original thread? if there is no original thread, can we have some more info on it anyway, like maybe where you found it or something?

[gallevy]

http://rapidshare.com/files/123040430/Trinity_P3600i_WM6.1_OS_19199_WWE_Mary371based_PDA MobizCustomized.rar.html

:)

What is this rom?
Thanks

[joncgde2]

i asked the same thing lol...


why don't you try it out and let me know ;)


the link points to some sort of PDAMobiz/Mary hybrid

[amanx]

What is this rom?
Thanks


i hv install this rom
work great
but no hsdpa switch ><

[gallevy]

installed the mary sl , work great...

[gallevy]

problems with sms (in all the "working" roms) but only when i install hebrew mui of pdac.

[gallevy]

anyone try the [WWE] WM 6.1 Elegance edition 2.14 [ONLINE] OS 5.2.19213 Build 19213.1.0.0?

[amanx]

anyone try the [WWE] WM 6.1 Elegance edition 2.14 [ONLINE] OS 5.2.19213 Build 19213.1.0.0?

http://forum.xda-developers.com/showpost.php?p=2305071&postcount=20

[gallevy]

Is there other rom? all the roms have a problem after installing hebrew...
Is there a wwe rom?

[Andych]

Is there other rom? all the roms have a problem after installing hebrew...
Is there a wwe rom?

All the ROMs listed in this thread are WWE.

[gallevy]

All the ROMs listed in this thread are WWE.

ok, but when i install the mui the problems begin, so i called to the company that sale the mui and they told me that my licence is ok for 6.1 but the trinity doesnt have official 6.1 and the mui doesnt work well with some cocked roms, so i asked if its in all the cocked and she told me that there is some cocked roms that their mui work great with no problems... so i think that my solution for me is to try all the roms... and untill now i tried all the roms in this tread.
Thanks to everyone that help me, I realy appreciate this.

[Andych]

ok, but when i install the mui the problems begin, so i called to the company that sale the mui and they told me that my licence is ok for 6.1 but the trinity doesnt have official 6.1 and the mui doesnt work well with some cocked roms, so i asked if its in all the cocked and she told me that there is some cocked roms that their mui work great with no problems... so i think that my solution for me is to try all the roms... and untill now i tried all the roms in this tread.
Thanks to everyone that help me, I realy appreciate this.

Unfortunately not all the Trinity 6.1 cooked ROMS work with the P3600i. As more are tested and become available you may find one that works. Until then all we have is right here.
You may be better going back to WM6 if you really need to read Hebrew, at least till some more ROMs become available for testing.

[nikitto]

Hello everybody.

I don't know what the diference is between P3600 and P3600i. But, it looks like only some lights or super-lights versions work on P3600i.

I uploaded two weeks ago, a really Ultra-Light version. HRUL_V2. The link: http://forum.xda-developers.com/showthread.php?t=397517

If someone tries this version maybe I'll be able to help you.

Thanks.

[Jackuuuuu]

Thank you for the useful thread! :)

Flashing Flashing now!

[amanx]

Hello everybody.

I don't know what the diference is between P3600 and P3600i. But, it looks like only some lights or super-lights versions work on P3600i.

I uploaded two weeks ago, a really Ultra-Light version. HRUL_V2. The link: http://forum.xda-developers.com/showthread.php?t=397517

If someone tries this version maybe I'll be able to help you.

Thanks.

HRUL_V2 tired, not work ><

[joncgde2]

olipro gave me a big tip on how to proceed with finding out WHY some ROMs won't work... hopefully it will throw up something big that we can pay our attention to.

one more day until my exams are over, and then i can have a look into this... and hopefully the mystery will be solved :D

also i'll update the working and non-working ROMs list tomorrow as well... just been incredibly busy this week:rolleyes:

[Andych]

olipro gave me a big tip on how to proceed with finding out WHY some ROMs won't work... hopefully it will throw up something big that we can pay our attention to.

one more day until my exams are over, and then i can have a look into this... and hopefully the mystery will be solved :D

also i'll update the working and non-working ROMs list tomorrow as well... just been incredibly busy this week:rolleyes:

Hey Jon
We have waited a long time for this so another day or so isn't going to kill us. I am reasonably happy with the PDAViet I have installed now...but would love to try out a few of the others....if only I could get me head around how to make the changes....lol.
Hope the exams are going according to plan.

[kane81]

PDAVIET v37 works well!!!!

dont mind no bluetooth as I dont ever use it.

Cant wait for some more roms

[amanx]

not a reboot, but the same as if you just turned on phone for first time.

find another problem
after this kind of reset, flash memory down to 64mb

hard reset anytime is the same

but go back to original memory after flash rom again

[axl79]

HRUL_V2 tired, not work ><

NiAx Team will try to make work ours Roms into P3600i, I think it will be some changes, but if some P3600 Roms works, it can be done...

Stay tuned for news.

Grettings Nikitto & Axl79. NiAx Team.

[Juani28]

Hola a todos!.Es mi primer mensaje en este foro. Gracias a todos los que lo hacen posible.

Tras intentar de todas las formas posibles instalar las Roms de Niax y Faman en mi P3600i, y no tener éxito, espero que alguna persona me ayude con mi problema. Tengo el WM6 en inglés y no entiendo mucho, ya que soy español. He probado la traducción que existe para la Trinity pero tiene algunos errores. Por favor, si alguien sabe como instalar con éxito una Rom actualizada en la P3600i (Niax, Faman,...) decidme como hacerlo. Muchas gracias. Saludos.

PD: La traducción del texto es de google, jejeje

Hello everyone!. It's my first message in this forum. Thanks to all who make this possible.

After trying in every possible way to install the Roms of Niax and fame in my P3600i, and not succeed, I hope someone help me with my problem. I have the WM6 in English and do not understand much because I'm Spanish. I have tested the translation for the Trinity but there are some errors. Please, if anyone knows how to install a successful Rom available at the P3600i (Niax, Faman ,...) say me how to do. Thank you very much. Greetings.

PS: The translation of the text is google, jejeje

[Andych]

NiAx Team will try to make work ours Roms into P3600i, I think it will be some changes, but if some P3600 Roms works, it can be done...

Stay tuned for news.

Grettings Nikitto & Axl79. NiAx Team.

Sounds good Axl79
Your work is always good. Let us know, I am sure there are plenty of available Testers here.

[seroster]

Anyone able to get HSDPA working under either of these roms? I installed the 1.5 radio rom and have tried both roms (currently running PDAviet) and am unable to select HSDPA in the band options in the phone setup screens.

[Andych]

Anyone able to get HSDPA working under either of these roms? I installed the 1.5 radio rom and have tried both roms (currently running PDAviet) and am unable to select HSDPA in the band options in the phone setup screens.

I am running PDAVIET 3.2 and HSDPA works no worries. Also running 1.50 radio.

[xiumutou]

thanks mate, list updated

[joncgde2]

thanks mate, list updated


LOL - yes, it has been... finally :D


sorry about the delay, but hopefully i've got all the details right... i went through the posts and i think i have the situation as it currently stands, please let me know of any errors

i'll get onto investigating the inoperable ROM issue later tonight... it's just hard to get motivated to flash everything when you've spent time setting everything up nicely :p

but what needs to be done will be done

in the next couple of weeks, hopefully with some help from a few people we might see some progress

[gallevy]

What is the YK v3.11 can you pls upload some screenshots... or the original tread.
Thanks

[Andych]

What is the YK v3.11 can you pls upload some screenshots... or the original tread.
Thanks

HI Gal
It is part of the Yaka 3.12 thread....it starts on page 11, link below.
http://forum.xda-developers.com/showthread.php?t=370136&page=11

[Andych]

I did a little investigation and the following Operating systems seem to be the ones which work on the P3600i

5.2.19209.1.0.2 (PDAVIET V32)
5.2.19199.1.0.0 (Mary V3.7)
5.2.19949.1.2.0 (PDAVIET V37)
5.2.19213 (no more detail) Yk 3.11

We know that some of the other which don't work are also 5.2.19213 base but there are also quite a few more in the 6.1 ROM collection which are yet to be tried (based on the above build numbers).
For the life of me I cannot figure out how to change the settings to try any of them, so anyone who can make the changes.....lets see what does and doesn't work.
With doing that and the work Jon is doing maybe we can get a good collection of working ROMs that will suit everyones needs.

[micahakaslick]

hey guys,
just wondering if anyone has the original P3600i ROM...WM6 and all?

rumor has it it's called:
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.3 0.11_108_Ship
but i've hunted around and can't find it anywhere. anybody have it and abe to share it? thanks heaps guys

(just wanna keep it in case i have any problems with these)

[Andych]

hey guys,
just wondering if anyone has the original P3600i ROM...WM6 and all?

rumor has it it's called:
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.3 0.11_108_Ship
but i've hunted around and can't find it anywhere. anybody have it and abe to share it? thanks heaps guys

(just wanna keep it in case i have any problems with these)

You really should hunt around in here more before asking.
http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3

Look at the bottom of the page.

[micahakaslick]

You really should hunt around in here more before asking.
http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3

Look at the bottom of the page.

legend. thanks heaps!

[Mario_R_83]

Tried the mary superlite today.
Works fine after installation, much faster than original WM6.
But then just now, I tried to listen to some musics through Bluetooth, the PDA freeze. Did some soft resets, keep getting stuck on loading page (the one with Windows Mobile 6). Did a Hard reset and all my data in storage card gone as well

[Jackuuuuu]

Hey guys,

Once again thx for all the hard work been contributed over the last 6 months of hell!

I have tried all roms listed on post 1 by big man, joncgde2!!! Thank you!

I love Mary 3.7 SL THE BEST. This gave me all the feature I needed.

Over a week of Mary 3.7 SL I have encounter one major problem:

Phone occasionally hang (usually twice a day). SR will stuck at window load up screen. HR is the only way. Note, have tried re-download and reinstall rom.

I guess that's similar to "Mario_R_83".

There are too many pros:
1. Super fast! Official rom going into /Windows takes over 15 secs. Mary = 2 secs LOL :)

2. Super clean

3. Loan TomTom fast.

4. O2plus actually works with "sound" profile. This unable to work in the official rom, as this causes constant SR. I like this sound profile particularly the 'random' ringtone feature. (I can't work out call surprise lol)

5. After Oxio CloseApps give me over 28-30mb free memory :)

6. Going to Start > Settings is a bomb. No lag like official rom :)

This alone gave me many joys. However, the hang problem gets quite annoy as I need to install everything again and again everytime it hangs, as a HR is required.

Anyone else share the same pain as me and "Mario_R_83"

[bigrod115]

ive noticed in YK v3.11 there is a button under the connection manager to enable / disable voip, does anyone know what programm this is ment to be tied to?

[gallevy]

Can someone send screenshots of the YK v3.11... in the original tread there is no screenshots of this version...

[vnt]

hi joncgde2,

those ROMs are working that you tested on your p3600i ?
does it mean the GPS is still working?

THank you

[vnt]

hey guys,
just wondering if anyone has the original P3600i ROM...WM6 and all?

rumor has it it's called:
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.3 0.11_108_Ship
but i've hunted around and can't find it anywhere. anybody have it and abe to share it? thanks heaps guys

(just wanna keep it in case i have any problems with these)

go to htc.com and register as a user then you can download it

[Andych]

go to htc.com and register as a user then you can download it

Not anymore. Last time I looked it was not on the HTC Worldwide EClub. It is still on the Australian HTC Club but if your phone is not an Australian version it will not allow you to register.

[gallevy]

3 days with the YK v3.11... I think its the best till now...

[ajajaj]

3 days with the YK v3.11... I think its the best till now...

pdaviet 3.2 just died on me (memory reset) after 7 days.

bugga.

I am going to get myself a tytnII (yes yes, I know about video issues)

[Jackuuuuu]

Mary SL 3.7.

Hang while trying Activesync! LOL

SR - stuck at "Hellonasty" screen.

HR is the only soln. :(

[raf1987]

Not anymore. Last time I looked it was not on the HTC Worldwide EClub. It is still on the Australian HTC Club but if your phone is not an Australian version it will not allow you to register.

use this one

http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe

[ajajaj]

pdaviet 3.2 just died on me (memory reset) after 7 days.

bugga.



and again this morning....

[ajajaj]

I'm going back to stock rom - resetting the phone daily now

[Andych]

I'm going back to stock rom - resetting the phone daily now

I am still running PDAVIET 3.2 and am really happy. I have TT7 running and have not to Hard reset at all.
It seems as though no-one is trying too much in the last couple of weeks.

[ajajaj]

I am still running PDAVIET 3.2 and am really happy. I have TT7 running and have not to Hard reset at all.
It seems as though no-one is trying too much in the last couple of weeks.

pdaviet worked great for me for over a week, however when it did reset itself, it started resetting every 12-24 hours - could be the workload I give it (exchange syncronisation - lotsa contacts, even more emails)

ah well, 3 are sending me some new phones (kaiser) this week to fart around with - see how we go - so long, and thanks for all the fish!

[gallevy]

Why all the roms for p3600i is p3600 roms that modified... Its possibile to make rom that appointed to p3600i?

[ie88]

I have been using YK 3.11 for 3 days. First of all, it is a working ROM with good Chinese support. Unfortunately, my machine was stuck at the HTC logo screen after SR an hour ago. Finally, I had to use the final resort - HR, but all my new data was gone.

I don't know if it is my bluetooth headset problem. I am using Sony VGP-BRM1BT headset. The voice quality is bad (sound was dropping) with the YK ROM. The quality was quite good with the original ROM. I am using the 1.5 Radio.

__________________
IE88
HTC p3600i
WM6
YK 3.11

[Jackuuuuu]

Sorry to be a pain, but Mary 3.7 SL die on me again today while activesync. It hang, so my only soln was to SR. But, SR keep on stuck on 'hellonasty' screen again! lol

So HR. new data lose again... and needs to install all cabs etc etc :(

Being playing around with phnikola's HTC Trinity - Complete Cooking Tutorial for Beginners
http://forum.xda-developers.com/showthread.php?t=402982

But, can't get Mary to work, coz important files has been removed.

[poggiami]

Not any renew??

[sydaroo]

I've experimented with Mary and PDAviet for some time now and also had the problem of getting stuck on SR after running the OS for several days. For me, the only way to recover from this was to do a HR and lose all data - good thing I run a daily PIMbackup on my phone.

I've narrowed this problem to some SWs that I installed on these OS'. I noticed that the following 2 apps consistently caused my phone to get stuck after SR over time: PocketMax PhoneAlarm v2.0 and SPB Mobile Shell v2.1. I have since installed a new PDAViet OS and have not installed these 2 apps. For more than 1 week, my OS has been running very stable and have not gotten stuck after SR. I wonder if there are other SWs that may have caused similar problem for other people. May want to experiment with a fresh OS without installing some of your favorite apps.

[Andych]

I am running PDAVIET 3.2 (as I need BT) and have no problems at all. The only apps I run are S2U2, GroupSMS, Quick Position, HTC Home Customiser, OPMON and Tomtom7.
I have 165meg of free Storage and 20.85meg of Operating Ram on my phone right now and I have not done a SR for over a week and the last time I did a HR was when I reflashed my phone after trying the Yaka light Rom 10 days ago.

Overall I am really happy, but would still like to see some development on ROMs for the P3600i.
I really don't have the time to learn how to Cook a ROM right now, so hopefully someone else out there will come up with something good soon that I can try.

[zero_1984]

once a week since i've done this i have had to hard reset the phone - and thats using both mary and pdaviet.

its unfortunately really. both times have been either usb connections with activesync, but bluetooth with activesync is fine.

[fizawan]

I have been using all of the roms listed, and each seems to has the same problems, hang on the startup after SR when the phone is kind of stuck running some software, even though on different roms they stuck at different software. All the marys will stuck if you used s2u2, opera browser 9.5, and lite version stuck on mapking (GPS software), yaka will also stuck on opera 9.5 and at one time stucked when performing mortscript run to change today plugin, the weather panel, so I dont know if its really the mortscript or marsware weatherpanel, and pdaviet37 and pdaviet32 stuck on unknown (but possibly opera browser too), therefore, you guys should add to list not to install opera browser 9.5 until there are a really stable version of opera browser, in addition to the situation explained above

[EndoSurf]

I have the mary lite rom with notouchflow...

Testing performed is install an application, then soft resetting after each application till it buggers up.....

Green Software AlarmClock v1.2 - Soft Reset Successful
Battery StatusExt 1.04.242 - Soft Reset Successful
Mobile Secretery - Soft Reset Successful
Oggsync 4.0.7 - Soft Reset Successful
Resco Explorer 2008 v7.02 - Soft Reset Successful
RJV SMS Scheduler v 1.3 - Soft Reset Successful
Soft Key Applet - Soft Reset Successful
SPB Phone Suite - Soft Reset Successful
HTC Task Manager 2.0.30487.2 - Soft Reset Successful

So far so good... Mind you, last time I started installing CABS via Explorer before i had the crashes....

Interesting note, went to configure some settings and Battery StatusExt reported that it wasnt installed properly... Last time i installed Battery Status it worked fine.... So it must be conflicting with something:/

Next Crash I will update this post with what i was doing when it crashed...

Update: Looks like activesync caused a lockup... and the lockup stopped the device from rebooting :( So a hard reset it is:/

[Jackuuuuu]

I have the mary lite rom with notouchflow...

Testing performed is install an application, then soft resetting after each application till it buggers up.....

Green Software AlarmClock v1.2 - Soft Reset Successful
Battery StatusExt 1.04.242 - Soft Reset Successful
Mobile Secretery - Soft Reset Successful
Oggsync 4.0.7 - Soft Reset Successful
Resco Explorer 2008 v7.02 - Soft Reset Successful
RJV SMS Scheduler v 1.3 - Soft Reset Successful
Soft Key Applet - Soft Reset Successful
SPB Phone Suite - Soft Reset Successful
HTC Task Manager 2.0.30487.2 - Soft Reset Successful

So far so good... Mind you, last time I started installing CABS via Explorer before i had the crashes....

Interesting note, went to configure some settings and Battery StatusExt reported that it wasnt installed properly... Last time i installed Battery Status it worked fine.... So it must be conflicting with something:/

Next Crash I will update this post with what i was doing when it crashed...

Update: Looks like activesync caused a lockup... and the lockup stopped the device from rebooting :( So a hard reset it is:/

Thanks for the details.

I had to HR again last night... due to ActiveSync!

[joncgde2]

well sorry it took me so long, was busy (physically and mentally) with work, and just couldn't bring myself to do this until now (even though it's only taken 10 minutes... go figure :p)

So according to Olipro's advice I was to generate a dump from the phone at the point it freezes up using MTTY... I've done that, and can't make heads or tails of it... I don't want to msg Olipro and annoy him yet again so maybe we can take NiaX up on the offer of help?

Anyway, here is the log dump for anyone that might be able to get some use out of it (attached to this message).

I'll send a msg to NiaX and see if we can get some feedback on what the issue is...


Cheers

Jon

[ssamth2003]

Sorry to be a pain, but Mary 3.7 SL die on me again today while activesync. It hang, so my only soln was to SR. But, SR keep on stuck on 'hellonasty' screen again! lol

So HR. new data lose again... and needs to install all cabs etc etc :(

Being playing around with phnikola's HTC Trinity - Complete Cooking Tutorial for Beginners
http://forum.xda-developers.com/showthread.php?t=402982

But, can't get Mary to work, coz important files has been removed.

same to me, now i also try to play with Phnikola's cooking..but fail on step 3 Dump rom, while run the dump rom, its say "not found RUU_signed.nbh" which i alredy placed follow the instruction. (use Vista PC) but I try with XP pc, the same step will say : nbhtool_trin.exe corrupts"

any advise?

[gallevy]

anyone tried Trinity WM6.1_5.2.19588 WWE ROM support CHS,CHT,JP,KR,TH,ENG Diamond Full V03.13.YK?

[monyozt]

my friend said that this ROM
[30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2] [Update][30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2 ([Update) works fine on htc p3600i.. anyone tried?? its true??

[EndoSurf]

I've been using PDAViet since the last time Mary decided to lock up.. I'm using 3.5 i think it is, the one that has bluetooth, but no video calling.

Seems to be stable so far, I havent reloaded everything yet but so far so good...

[Jackuuuuu]

my friend said that this ROM
[30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2] [Update][30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2 ([Update) works fine on htc p3600i.. anyone tried?? its true??

I tried and repackage everything after change header and successfully flashed, but like many others stuck at "smart mobility" screen at start up.

[Andych]

my friend said that this ROM
[30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2] [Update][30 June 2008]Trinity WM 6.1 OS 19588 DIAMOND Edition by Akeo_V2 ([Update) works fine on htc p3600i.. anyone tried?? its true??

Several people have tried...including me...and it flashes Ok but then will not go past the 2nd splash screen on boot.
So I am afraid your friend is full of Sh*t.....or using a normal Trinity P3600

[Kurni]

Pity there hasn't been any cook who pays attention to P3600i; I wonder if there will ever be...

[sydaroo]

I did some experiments on PDAViet (build 19213). After using it for some time, this OS would hang on boot screen after a SW. In the past, I would have to do a HR and lose all my data to get out of this. Yesterday, when my phone hung on the boot screen, I pulled out the battery, my 8G microSD card and the SIM card. Without re-inserting the SIM card and the microSD card, my phone was able to boot up properly. Then I shut down my phone again and put all the cards back and I was able to use my phone as normal.

Today, my phone hung again after a SW, I decided to just remove the SD card only and not the SIM card this time. After this, my phone was able to boot up OK. And then I pulled out the battery again and put the SD card back in and it was able to boot up properly and work as normal.

I have no understanding of wm6 at all, but I wonder if the recent hangs reported by so many on this forum is related to the driver for the SD card or SIM card?

Cheers,
Robert

[Jackuuuuu]

Nice one!

I shall try that next time!!!!

Thanks! :)

I did some experiments on PDAViet (build 19213). After using it for some time, this OS would hang on boot screen after a SW. In the past, I would have to do a HR and lose all my data to get out of this. Yesterday, when my phone hung on the boot screen, I pulled out the battery, my 8G microSD card and the SIM card. Without re-inserting the SIM card and the microSD card, my phone was able to boot up properly. Then I shut down my phone again and put all the cards back and I was able to use my phone as normal.

Today, my phone hung again after a SW, I decided to just remove the SD card only and not the SIM card this time. After this, my phone was able to boot up OK. And then I pulled out the battery again and put the SD card back in and it was able to boot up properly and work as normal.

I have no understanding of wm6 at all, but I wonder if the recent hangs reported by so many on this forum is related to the driver for the SD card or SIM card?

Cheers,
Robert

[Jackuuuuu]

0.01TNYSXY - http://forum.xda-developers.com/showthread.php?t=405677

Doesn't work. Will stuck at boot up screen :(

[tnyynt]

0.01TNYSXY - http://forum.xda-developers.com/showthread.php?t=405677

Doesn't work. Will stuck at boot up screen :(

Try karmba_a's procedure to modify the ROM. It's described here (http://forum.xda-developers.com/showpost.php?p=2373753&postcount=49)!

[Jackuuuuu]

Try karmba_a's procedure to modify the ROM. It's described here (http://forum.xda-developers.com/showpost.php?p=2373753&postcount=49)!

Hey tnyynt!!
I have actually tried it...

Had changed the header...
successfully falshed...
but like many other roms

will stuck at boot up screen :( :(

I wonder why...

I'm testing again as we speak after reading sydaroo's post re: taking out Memory card and Sim card....... fingers cross!!

[Jackuuuuu]

Hey tnyynt!!
I have actually tried it...

Had changed the header...
successfully falshed...
but like many other roms

will stuck at boot up screen :( :(

I wonder why...

I'm testing again as we speak after reading sydaroo's post re: taking out Memory card and Sim card....... fingers cross!!

Can't go pass the boot up screen, even with memory and sim card out!

Anyone tried Schap's rom?
http://forum.xda-developers.com/showthread.php?t=355506

[Andych]

I tried Karmba's latest Diamond ROM tonight as he has a P3600i version for download. It is like the other later ROM's in that it flashes OK but will not load past the 2nd splash screen.
it would be really nice to figure out why this is happpening. It must be something in the OS as it appears to be only certain OS versions that will work.
Bakc to the PDAVIET32.....
Luckily it ony takes me about 10 minutes to get back to my fully loaded system...I have flashed and re-flashed so many times over the last few weeks it is pretty quick now.

[o_sing_o]

Can't go pass the boot up screen, even with memory and sim card out!

Anyone tried Schap's rom?
http://forum.xda-developers.com/showthread.php?t=355506

HI, Jackkkkk

I have tried to change this rom to P3600I, and I have flashed successful, here is the download link!
http://www.mediafire.com/?nrtlmw9sztl

Remark: You ***MUST*** flash HardSPL 3.20 first!!!

Cheer
o_sing_o

[ssamth2003]

HI, Jackkkkk

I have tried to change this rom to P3600I, and I have flashed successful, here is the download link!
http://www.mediafire.com/?nrtlmw9sztl

Remark: You ***MUST*** flash HardSPL 3.20 first!!!

Cheer
o_sing_o

thks for sharing..will try and update here.

[ssamth2003]

thks for sharing..will try and update here.

update: flash ok with no problem, Violet screen made me alert :), but this is only WM6 :(,
lets use for sometime to see how stable.
thks o-sing-o for your sharing rom.
HTC P3600i (CHT9110) user pls noted. this is another good rom to try but WM6.0

[Jackuuuuu]

HI, Jackkkkk

I have tried to change this rom to P3600I, and I have flashed successful, here is the download link!
http://www.mediafire.com/?nrtlmw9sztl

Remark: You ***MUST*** flash HardSPL 3.20 first!!!

Cheer
o_sing_o

Hey thx for that!!!

But I can't seem to read mediafire... can't download :(

[gallevy]

HI, Jackkkkk

I have tried to change this rom to P3600I, and I have flashed successful, here is the download link!
http://www.mediafire.com/?nrtlmw9sztl

Remark: You ***MUST*** flash HardSPL 3.20 first!!!

Cheer
o_sing_o

If its wm6 why we need this rom? the original is wm6 too...

[o_sing_o]

Hey thx for that!!!

But I can't seem to read mediafire... can't download :(

Hi, jackkkkk
I have check the link, it's work. You try to download again please.

If its wm6 why we need this rom? the original is wm6 too...

Hi, gallevy
It's because this rom is more stable than original one.
This is a good good good rom!!!

[gallevy]

Hi, jackkkkk
I have check the link, it's work. You try to download again please.



Hi, gallevy
It's because this rom is more stable than original one.
This is a good good good rom!!!

If you say so... I will try it... :)
Today I flash my device to PDAVIET v37... untill now its look great

[Argyle0297]

PDAVIET v.38. anyone tried??? someone got it installed on CHT9110. anyone want to try and gave fedback?

[sydaroo]

Just tried it and it installs fine, but unfortunately, it still can't connect to a bluetooth headset. So, I will go back to PDAVIET v35 :(

[Andych]

Just tried it and it installs fine, but unfortunately, it still can't connect to a bluetooth headset. So, I will go back to PDAVIET v35 :(

PDAVIET35???/ which one is that? Can you provide a link.
I am running PDAVIET32 as per the link on the first page but there is no PDAVIET35 there.


There is a BT patch for PDAVIET37 here http://forum.xda-developers.com/showthread.php?t=398196
I haven't tried it yet....but I will later today.

[sydaroo]

PDAVIET35???/ which one is that? Can you provide a link.
I am running PDAVIET32 as per the link on the first page but there is no PDAVIET35 there.


There is a BT patch for PDAVIET37 here http://forum.xda-developers.com/showthread.php?t=398196
I haven't tried it yet....but I will later today.
Andych,

I got it from here: http://www.pdaviet.net/showthread.php?p=346306 The build is 19213.

Thx for the bluetooth fix, I'll try it right now.

[sydaroo]

PDAVIET35???/ which one is that? Can you provide a link.
I am running PDAVIET32 as per the link on the first page but there is no PDAVIET35 there.


There is a BT patch for PDAVIET37 here http://forum.xda-developers.com/showthread.php?t=398196
I haven't tried it yet....but I will later today.
I just tried the patch on PDAVIET v38 and it doesn't work. According to the thread, the patch doesn't work for PDAVIET v37 either. It's a bummer as I really like PDAVIET.

[sydaroo]

PDAVIET35???/ which one is that? Can you provide a link.
I am running PDAVIET32 as per the link on the first page but there is no PDAVIET35 there.


There is a BT patch for PDAVIET37 here http://forum.xda-developers.com/showthread.php?t=398196
I haven't tried it yet....but I will later today.
OK, I just got PDAVIET v37 with the bluetooth patch from Argyle to work. I can connect to my bluetooth headset. :) Will report back after a few days if this build is stable.

Cheers!

[gallevy]

PDAVIET35???/ which one is that? Can you provide a link.
I am running PDAVIET32 as per the link on the first page but there is no PDAVIET35 there.


There is a BT patch for PDAVIET37 here http://forum.xda-developers.com/showthread.php?t=398196
I haven't tried it yet....but I will later today.

I tried this patch... its stuck the device... Its stucks in the second boot screen

[ssamth2003]

He everyone, another WM6.1 rom from pdaviet which work on CHT9110 + spl olipro 3.2 :

http://forum.xda-developers.com/showthread.php?t=406364

@@@but pls, you need to change the header to 401 follow this thread:

[Andych]

OK I flashed PDAViet 3.7 last night and ran the BT fix and it connects fine with my car kit and BT headset.
Initial impressions....love the Diamond theme, I installed HTCHome customiser and have changed just a few minor things (coloured Icons and trasnparency).
I think this ROM is a little slower than PDAVIET36 but time will tell.
One annoyance is that in advanced configuration, no matter how I set the "show sim contacts" it doesn't save and on each re-set it goes back to the default of showing them.
More info as I learn about it.

[sydaroo]

OK I flashed PDAViet 3.7 last night and ran the BT fix and it connects fine with my car kit and BT headset.
Initial impressions....love the Diamond theme, I installed HTCHome customiser and have changed just a few minor things (coloured Icons and trasnparency).
I think this ROM is a little slower than PDAVIET36 but time will tell.
One annoyance is that in advanced configuration, no matter how I set the "show sim contacts" it doesn't save and on each re-set it goes back to the default of showing them.
More info as I learn about it.
I agree with you about the performane of this ROM. It seemed a little slower, but so far appears to be stable (need to run it for more than a week to confirm though). Regarding advanced config, try installing the latest one. I had problem using the one shipped with the build when I tried to changed some connection related parameters. After I install the latest version, I was able to change those parameters.

[sydaroo]

He everyone, another WM6.1 rom from pdaviet which work on CHT9110 + spl olipro 3.2 :

http://forum.xda-developers.com/showthread.php?t=406364

@@@but pls, you need to change the header to 401 follow this thread:
But v38 still has a BT problem and I couldn't find a working BT patch for this version.

[gallevy]

anyone tried the 003TNYSTD - CE OS 5.2.19588 (Build 19588.1.1.4) WWE?
http://forum.xda-developers.com/showthread.php?t=405677

[Andych]

Well so far I am reasonably happy with this ROM, once you get used to it it doesn't seem as slow anymore (subjective I know).
I haven't had the chance to re-load Advanced Configuration but I did check and mine is showing as the latest version...I will over-write it and see if that fixes the "hide Sim contacts" issue.
There were a couple of other cabs I tried that don't seem to work either...one of them being coloured battery % cab......not really sure why it doesn't work. I could always have a look at the reg entries....but I really don't know what I am doing there so maybe not....lol.
Tomtom 7 works well on it as does S2U2.
More after the weekend when I can play with it a bit more.

[sydaroo]

Well so far I am reasonably happy with this ROM, once you get used to it it doesn't seem as slow anymore (subjective I know).
I haven't had the chance to re-load Advanced Configuration but I did check and mine is showing as the latest version...I will over-write it and see if that fixes the "hide Sim contacts" issue.
There were a couple of other cabs I tried that don't seem to work either...one of them being coloured battery % cab......not really sure why it doesn't work. I could always have a look at the reg entries....but I really don't know what I am doing there so maybe not....lol.
Tomtom 7 works well on it as does S2U2.
More after the weekend when I can play with it a bit more.
Here're the files you need to install to get the colored battery % display on the top bar. I installed "SdkCerts.cab" first and then did a reboot before I installed "PK NewWarningColorBatteryClean3G.cab" (I also did another reboot after installing this).

[desolateone]

anyone tried the 003TNYSTD - CE OS 5.2.19588 (Build 19588.1.1.4) WWE?
http://forum.xda-developers.com/showthread.php?t=405677

I tried it, but alas I get ERROR[270] The Image file is corrupt. :mad:

Which annoyed me no end as it is a very nice set of ROMs. :cool:

[Andych]

Here're the files you need to install to get the colored battery % display on the top bar. I installed "SdkCerts.cab" first and then did a reboot before I installed "PK NewWarningColorBatteryClean3G.cab" (I also did another reboot after installing this).

Thanks for that...I will do that tonight. Might be why elias Auto Hibernate doesn't work as well. I didn't even think of thSdkCerts.cab, last time I used that was about 12 months ago...lol

[Jackuuuuu]

Mary 3.7SL stuck in Avantgo with Activesync stucked.

Tried your method but no use... had to hard reset :(

I did some experiments on PDAViet (build 19213). After using it for some time, this OS would hang on boot screen after a SW. In the past, I would have to do a HR and lose all my data to get out of this. Yesterday, when my phone hung on the boot screen, I pulled out the battery, my 8G microSD card and the SIM card. Without re-inserting the SIM card and the microSD card, my phone was able to boot up properly. Then I shut down my phone again and put all the cards back and I was able to use my phone as normal.

Today, my phone hung again after a SW, I decided to just remove the SD card only and not the SIM card this time. After this, my phone was able to boot up OK. And then I pulled out the battery again and put the SD card back in and it was able to boot up properly and work as normal.

I have no understanding of wm6 at all, but I wonder if the recent hangs reported by so many on this forum is related to the driver for the SD card or SIM card?

Cheers,
Robert

[desolateone]

Mary 3.7SL stuck in Avantgo with Activesync stucked.

Tried your method but no use... had to hard reset :(

I eventually went to 3.7.1 because of the freezes.

None so far.

[sydaroo]

Mary 3.7SL stuck in Avantgo with Activesync stucked.

Tried your method but no use... had to hard reset :(
Yeah...I was running PDAVIET v35 for quite a long time and a few times I was able to recover using this method, but eventually, there's always a lock that I can never recover from. Eventually, if I run this build long enough (about 7-10 days), I would have to do a HR.

Two days ago, I upgraded to PDAVIET v37. Since the upgrade, I had a lock on SR, but was able to recover using this method. I'm not optimistic that I can run this build for more than 10 days without a HR. :(

[joncgde2]

OK the list has been updated again with all the feedback you guys have given through your testing - thanks for that, makes it much easier for me to keep things up-to-date :D

I've noticed the thread about the new RADIO out as well, I might add a small note on the first page with a link to this if it gets some good feedback... I'll wait for a few more posts on its performance before adding it in.

I'm still trying to work out what the problem is with ROMs that don't work, but being a newcomer to WM myself, I'm practically out of options... I'll try spamming some of the pros around here with questions - hopefully some sort of clue will pop up :p


Cheers,

Jon

[kane81]

I'm going back to the original firmware :(

I've tried mary and pdaviet and yk's

pdaviet was the best, but something happend (ie.mobile hanged and had to do a soft reset) and even a reflash wouldnt allow the mobile to boot. it kept hanging when the windows mobile 6.1 setup screen should appear. you can see the windows 6.1 green title screen, windows start menu icon and the connection icon at the top, but it is all locked up from there.

mary's died on me today. I was taking photos, then one photo froze. I did a soft reset and my phone was wiped. The phone automatically did a clean re-install from flash rom, thus I lost contacts, photos etc (yes contacts all backed up, but still I lost photos).

This has happened to me at least 4 -6 times over the weeks while playing around with these roms. There is something wrong with the roms imo, cause the phone hanging and then a soft reset should not cause the phone to wipe everthing and start from scratch again.

I dont know enough about all of this, but maybe the hack has side effects, thus why other roms wont work. ie. maybe a program / something writes to that address space causing the phone to restore from ROM. in marys and compatible roms, this code is only called on certain conditions, thus why it happens sometimes..... incompatible roms call it at the start, thus why the phone hangs on the startup screen....

I dont know, I see schaps.. maybe I'll give it ago. but I'm very sure there is something wrong if while taking photos, the phone crashes and restores the o/s from ROM on restart.

BTW: other times it has been tomtom that has caused the phone to freeze and do a auto ROM restore.

[gallevy]

Today ive tested the Schap v4.30 and I am proud to say its the best rom!
finaly after ive use all the rom's at leat a day of use to each rom and the Schap v4.30 is the best... even its wm6...

[desolateone]

OK the list has been updated again with all the feedback you guys have given through your testing - thanks for that, makes it much easier for me to keep things up-to-date :D

Cheers,

Jon

You can add/update the Mary to 3.7.1 http://www.mediafire.com/?xxnzgngsjec

It works great.

[Sturgeon]

Today ive tested the Schap v4.30 and I am proud to say its the best rom!
finaly after ive use all the rom's at leat a day of use to each rom and the Schap v4.30 is the best... even its wm6...

I've tried this one and although it's a great ROM, when I open IGO 8 everything freezes and I have to SR. Other people in that forum have mentioned problems using TomTom so I suspect this ROM has a GPS issue.

[Andych]

I've tried this one and although it's a great ROM, when I open IGO 8 everything freezes and I have to SR. Other people in that forum have mentioned problems using TomTom so I suspect this ROM has a GPS issue.

The issue is with IGO8, you actually need to change the system cache values using Advanced configuration to get IGO8 to work on any of the Trinity phones.
Problem is in the available memory provided in cache to keep it running.
I tried it and while I was able to get it to start and navigate OK, if I received a call the phone would crash, requiring a soft re-start. It was just way too memory hungry. The new Tomtom7 works wonderfully though. I doesn't minimise TT when you receive a call, it mutes the voice instructions but leaves the navigation screen up so you can still see where you need to turn. In TT6 it not only muted the program but minimised it and you needed to tap the icon to bring it back up again....annoying when you are trying to drive.

[Andych]

You can add/update the Mary to 3.7.1 http://www.mediafire.com/?xxnzgngsjec

It works great.

Which ROM is this based on? we need to give Jon as much info as possible when listing updated or new ROM's that work so he can post the proper links etc.

[tnyynt]

Please make it sticky... many thanks...

There's already a sticky in the Forum, CAB Collections | ROMs | Useful links.
Contact Cyrus Kourosh to update his thread with the 3600I ROMs.

[amanx]

is there any method to solve the hard reset problem
it is a great problem after i upgrade the rom to wm6.1
and make me to flesh back to original wm6 ><

[gallevy]

is there any method to solve the hard reset problem
it is a great problem after i upgrade the rom to wm6.1
and make me to flesh back to original wm6 ><

Take the Schap v4.30 its better better better than the original with non of problems... Its the best rom till now

[amanx]

Take the Schap v4.30 its better better better than the original with non of problems... Its the best rom till now

how long hv u use it alreday?
i flash 6.1 rom the longest time can use without auto hardreset is 1 week
the shortest time is 1 day ><

really don't know what happen
and make me lost all the new contact and sms ><

[sydaroo]

how long hv u use it alreday?
i flash 6.1 rom the longest time can use without auto hardreset is 1 week
the shortest time is 1 day ><

really don't know what happen
and make me lost all the new contact and sms ><
I'm on PDAVIET v37 and have been using it for the past 10 days without having to do a HR. However, every 2-3 days I'm running into a series of hang on boot up screen after a SR (sometimes immediately after the phone is rebooted, the screen just displays garbage graphics.) However, so far I'm able to recover from all of these hangs by using one or combination of the method below:

1. Remove the battery and wait for several minutes before turning on the phone
2. Pull the SIM card out and reboot without it
3. Pull the SD card out and reboot without it

It appears these hang on boot occur on a regular interval, about 2-3 days for me and when it happens, I can get several of these hangs on the same day which is terribly annoying. It's really painful dealing with this problem in this way and I hope someone can fix this problem soon. I'll give Schap v4.3 a try if I'm finally forced to do a HR or get fed up dealing with this problem.

BTW, is WM6.1 still considered a beta product?

[Jackuuuuu]

I'm totally fed up with this gay HR. I had to do HR 3-4 times in a day! Just gets frastrated keep on restoring back files. Note, loses data between Backup and HR time.

helloworld1's cab batch install is quite handy.
http://forum.xda-developers.com/showthread.php?t=407885

Is there a free whole system back up software like spb back up?

I'm thinking going back to Schap v4.30 if these HR problems come back again.

I hope someone have good knowledge can work on a p3600i rom! I would like to learn, but I have absolutely not computer programing knowledge. :(

[Andych]

I'm totally fed up with this gay HR. I had to do HR 3-4 times in a day! Just gets frastrated keep on restoring back files. Note, loses data between Backup and HR time.

helloworld1's cab batch install is quite handy.
http://forum.xda-developers.com/showthread.php?t=407885

Is there a free whole system back up software like spb back up?

I'm thinking going back to Schap v4.30 if these HR problems come back again.

I hope someone have good knowledge can work on a p3600i rom! I would like to learn, but I have absolutely not computer programing knowledge. :(

I don't seem to be having too many dramas with my phone....I did notice the other day that the call button had stopped working so I did a SR and all was good again....Other than that I have been happily operating for nearly 2 weeks without any HR. Actually last time I did a HR was actually when I re-flashed to this ROM (PDAVIET37 with BT fix).
I am hoping to get a chance this weekend (maybe) or next weekend to dump PDAVIET39 and see what is in the external ROM.
It doesn't extract when you use the tools for changing the header so we cannot even try it (No BT) until this can be figured out.
Anyone else want to have a go as well???

[gallevy]

how long hv u use it alreday?
i flash 6.1 rom the longest time can use without auto hardreset is 1 week
the shortest time is 1 day ><

really don't know what happen
and make me lost all the new contact and sms ><

I am using it about a week even more... without any problem at all...

[Andych]

OK I tried PDAVIET39 and BT does not work, with or without Argyles BT fix cab.
I also found the ROM a bit unstable with the dialler not working properly.
The theme is pretty bland as well.
Back to my PDAVIET37 Rom....

[joncgde2]

hmm I don't know why people are having problems with their ROMs... I seriously have had NO issues with any ROM I have tested

it really must be something to do with individual programs... the people with problems really need to (if they can be bothered, or have the time) to just install one at a time, use their phone for a few days, then install another, etc. until they run into issues


also as for PDAVIET 39... some input would be good here... is it worth adding to the list? on the one hand I think yes, since it's a working ROM and the list is supposed to have working ROMs...

on the other hand I think that if it's really just more of the same with no real 'improvement' over v38 then it's just unnecessary? and perhaps this list can be a list of 'recommended' ROMs that represent something interesting, rather than just a whole lot of ROMs just for the sake of having them, even if they're not fully stable/useful

what are your thoughts?

[Andych]

hmm I don't know why people are having problems with their ROMs... I seriously have had NO issues with any ROM I have tested

it really must be something to do with individual programs... the people with problems really need to (if they can be bothered, or have the time) to just install one at a time, use their phone for a few days, then install another, etc. until they run into issues


also as for PDAVIET 39... some input would be good here... is it worth adding to the list? on the one hand I think yes, since it's a working ROM and the list is supposed to have working ROMs...

on the other hand I think that if it's really just more of the same with no real 'improvement' over v38 then it's just unnecessary? and perhaps this list can be a list of 'recommended' ROMs that represent something interesting, rather than just a whole lot of ROMs just for the sake of having them, even if they're not fully stable/useful

what are your thoughts?

I vote for the Recommended ROMs.......working ones only from now on or the list of non-working will just get longer and longer.
I agree with Jon on the programs side as well, maybe if you are having problems with a ROM that others say is fine...list your program additions and lets see if anything obvious shows up.

[miguelromao]

I have read several posts about stable roms .. i installed the finixover rom , 2 months ago ... since then .. have made 2 sofreset .. sync with outlokk ..noproblems .. use ad2p with stereo headset .. no problem .. everything is working fine ... recommendation 5star ..

update : use with several gps maps navigator .. 5 star

[ssamth2003]

I have read several posts about stable roms .. i installed the finixover rom , 2 months ago ... since then .. have made 2 sofreset .. sync with outlokk ..noproblems .. use ad2p with stereo headset .. no problem .. everything is working fine ... recommendation 5star ..

update : use with several gps maps navigator .. 5 star

do you use HTC P3600i ? and you flash Finixover to that?

[gallevy]

I have read several posts about stable roms .. i installed the finixover rom , 2 months ago ... since then .. have made 2 sofreset .. sync with outlokk ..noproblems .. use ad2p with stereo headset .. no problem .. everything is working fine ... recommendation 5star ..

update : use with several gps maps navigator .. 5 star

Which rom did you try? with p3600i?

[gallevy]

I have check the y.k 3.14 for p3600i from yaka ftp, Not working...

[kane81]

hmm I don't know why people are having problems with their ROMs... I seriously have had NO issues with any ROM I have tested

it really must be something to do with individual programs... the people with problems really need to (if they can be bothered, or have the time) to just install one at a time, use their phone for a few days, then install another, etc. until they run into issues


also as for PDAVIET 39... some input would be good here... is it worth adding to the list? on the one hand I think yes, since it's a working ROM and the list is supposed to have working ROMs...

on the other hand I think that if it's really just more of the same with no real 'improvement' over v38 then it's just unnecessary? and perhaps this list can be a list of 'recommended' ROMs that represent something interesting, rather than just a whole lot of ROMs just for the sake of having them, even if they're not fully stable/useful

what are your thoughts?

I'm not installing anything ....

TomTom is the only app that I installed. so far schaps has been good, but the camera the other day wouldnt work... a restart fixed the problem.

[Jackuuuuu]

Hard Reset again! Mary 3.7 SL :( I have tried all of the rom available, I prefer Mary 3.7SL :)

Ok lets list all programs that we have, maybe we could narrow it down!!!! :)

A2DPToggle
Adobe Reader Le 2.0
Avantgo <- I get stuck a lot with ActiveSync
Bluetooth Fix
FTouchFlo 1.4.1
FTouchFlo Config 0.9
GPS Quick Position
HButton 2.3
iContact
Enlarge Start Menu (JUVS)
O2 Plus 2.3 <- this could be another one?? Previously, original rom will auto reset if I have the 'Sound' profile plugin on Today.
Oxis Memory
Pocket Digital Clock 1.1.6
S2P
S2V
Schaps Advance Config 2.1
SIPChange
SMS Chat enabler v3
Soft Key Applet
SpbCalculator
ThumbCal 0.51
Top Bar
Total Commander
TouchPal 3.5
TT7
UKNote
Wake Up (Alarm software)
Windows Live 10.6.0034.0800
Weather Watch by Singer's Creations
Youtubeplay v1007

[Jackuuuuu]

Another thing, lately I had to do 3-4 hard resets in a day and then I got really frastrated and went back to Original WM6 (Aus Version). But it's too slow... LOL

So I went back to Mary lol

But going back to Original Rom, my radio revert back to 1.4xxxx! Is that normal? I reflash back to latest 1.5xxx with no problems...

Just curious that's all :)

[sydaroo]

Another thing, lately I had to do 3-4 hard resets in a day and then I got really frastrated and went back to Original WM6 (Aus Version). But it's too slow... LOL

So I went back to Mary lol

But going back to Original Rom, my radio revert back to 1.4xxxx! Is that normal? I reflash back to latest 1.5xxx with no problems...

Just curious that's all :)
I feel your pain! Every 1-2 days, I would get stuck on SR and sometimes it would take me 20-30 minutes before I can get the phone back working normally without doing a HR. This problem is so frustrating... But, I can't go back to WM6, like you said, it's soooo slow.

In a few days, I'm gonna try running PDAVIET v37 without installing any additional SW. Hope I can narrow down the SWs that are causing this problem for me.

[ssamth2003]

I also have try all the rom listed, and faced the same problem, some freez, some wipe all data...some can use few days some only few minutes. :(
after i flash to the lastest one, I would recommend all folk here to flash to this Karmba_a rom V10. its lastest build 20226 (i think) I have use it with no probelm, no problem atall to the soft that crash with the listed rom accepted S2SU, stable fast. just you need to do only change header to 401 and then flash to your trinity. its here :
http://forum.xda-developers.com/showthread.php?t=404208
its recommended Thks Karmba_a.

[Jackuuuuu]

I also have try all the rom listed, and faced the same problem, some freez, some wipe all data...some can use few days some only few minutes. :(
after i flash to the lastest one, I would recommend all folk here to flash to this Karmba_a rom V10. its lastest build 20226 (i think) I have use it with no probelm, no problem atall to the soft that crash with the listed rom accepted S2SU, stable fast. just you need to do only change header to 401 and then flash to your trinity. its here :
http://forum.xda-developers.com/showthread.php?t=404208
its recommended Thks Karmba_a.

Oh thx for that! Flashing now! :)

[matttse]

hi bro, which of them have office?

[Andych]

hi bro, which of them have office?

Which of what? If you mean the working ROMs I suggest you click on the links in first post to have a look at each of the original threads.....that will tell you what is in each of the builds....they are all a little different.

[Jackuuuuu]

You can also download Office all-in-one or individual cab for each of the Office products. Just use the 'search' function.

[Andych]

Hey Jack
How did you go with the Karmba V10 ROM? I would be interested to know if you were able to get it to load.

[Jackuuuuu]

Hey Jack
How did you go with the Karmba V10 ROM? I would be interested to know if you were able to get it to load.

Hey Andy!

Everything seems to be good! Plz try it!

No issues so far over 3 hours :)

[Sturgeon]

Hey Andy!

Everything seems to be good! Plz try it!

No issues so far over 3 hours :)


I've just flashed this and bluetooth isn't working :(

jackkkkk, have you tried BT?

[Jackuuuuu]

WARNING!!!

BT doesn't work with Karmba V10 as stated in the thread!

Damn! It's a really good rom! :(

[Jackuuuuu]

Sturgeon - Sorry saw your post after posting last msg.

Back to Mary 3.7 SL, I need BT! :(:(:(:(

[sydaroo]

Sturgeon - Sorry saw your post after posting last msg.

Back to Mary 3.7 SL, I need BT! :(:(:(:(
I read this thread a bit too late. Just installed Karmba v10 and was about to give it a try. I need BT also!! Anyone know if there's a BT patch for this build?

[Jackuuuuu]

Sorry sydaroo!

I should have try BT straight away!!! I hope you did a system backup!!! :(

[Andych]

Sorry sydaroo!

I should have try BT straight away!!! I hope you did a system backup!!! :(

Have you tried the BT fix that was used on PDAVIET37????
It may work.....worth a try.

Addition
I just checked and saw that the build on this is the same number (20226) as PDAVIET V38. That also had a BT problem in that when you tried to find BT devices it came up with a Hardware error. It may end up being only a change in the registry that fixes it, but the problem will be finding what setting needs to be changed.
I don't have the time this week to even have a look at it....maybe someone else is able to check.

[sydaroo]

Have you tried the BT fix that was used on PDAVIET37????
It may work.....worth a try.

Addition
I just checked and saw that the build on this is the same number (20226) as PDAVIET V38. That also had a BT problem in that when you tried to find BT devices it came up with a Hardware error. It may end up being only a change in the registry that fixes it, but the problem will be finding what setting needs to be changed.
I don't have the time this week to even have a look at it....maybe someone else is able to check.
Just tried the BT patch for PDAVIET v37 and it DOESN'T work :(

[Andych]

Just tried the BT patch for PDAVIET v37 and it DOESN'T work :(

Hmmm figured as much. It didn't work on PDAViet V38 or V39 either.
When you changed the header did it strip out an extended ROM as well?
In PDAViet 38 & 39 there is an Extended ROM that includes a BT fix cab (at least in V39 anyway).
When I get home later on tonight I will post the BT fix from that ROM (I dumped it over the weekend) just to see if that works. Who knows....maybe changing the header effects the Extended ROM somehow?

PS The BT fix from the extended ROM is a vastly different size to Argyles BT fix, so I am assuming it is different.

[ssamth2003]

I also have try all the rom listed, and faced the same problem, some freez, some wipe all data...some can use few days some only few minutes. :(
after i flash to the lastest one, I would recommend all folk here to flash to this Karmba_a rom V10. its lastest build 20226 (i think) I have use it with no probelm, no problem atall to the soft that crash with the listed rom accepted S2SU, stable fast. just you need to do only change header to 401 and then flash to your trinity. its here :
http://forum.xda-developers.com/showthread.php?t=404208
its recommended Thks Karmba_a.


I'm sorry, ust today, the Karmba_a om freez and S/R is no help hae to H/R and try to recover from backup anger, but bad luck...it say some error cant restore (even this back up from the same rom)...so now have to re install all sof again.
anyone face the same?

[ssamth2003]

I'm sorry again if this not good to Olipro,
As its seem all the rom cuase problem to our trinity which Hard SPL by Olipro 3.2, can it because of this Hard SPL ? may be Olipro can help us, forgive me if this is totally wrong. :(

[Andych]

I'm sorry again if this not good to Olipro,
As its seem all the rom cuase problem to our trinity which Hard SPL by Olipro 3.2, can it because of this Hard SPL ? may be Olipro can help us, forgive me if this is totally wrong. :(

I doubt it is the Hard SPL causing the problems, I don't need to HR or SR apart from when I try other ROMs.
It is a little hard to tell how it goes over an extended period as I seem to try a new ROM once a week....lol.

I suspect it may be more an issue with added software. I find that I need to add very little to the PDAViet V37 I am using. All I add is:
SDKCerts
Argyle BT fix
Personaliser
ELias Autohibernate
GPS Quick Position
Group SMS
HHCv10 Customiser
S2U2 V 1.05
TT7

If you were using Mary SL you may add a couple of other items but this is more than enough for me.
I currently have 170.13 meg free Storage and 21.78meg Program Memory...that is having run it since Sunday without doing any re-sets....no turning the phone off etc.
All I do is pop it into the cradle when I get home and it syncs my e-mail, contacts etc and charges up.

The only reason I am keep trying other ROMs is I am hoping to find the perfect ROM....I know....wishfull thinking...lol

[Jackuuuuu]

I doubt it is the Hard SPL causing the problems, I don't need to HR or SR apart from when I try other ROMs.
It is a little hard to tell how it goes over an extended period as I seem to try a new ROM once a week....lol.

I suspect it may be more an issue with added software. I find that I need to add very little to the PDAViet V37 I am using. All I add is:
SDKCerts
Argyle BT fix
Personaliser
ELias Autohibernate
GPS Quick Position
Group SMS
HHCv10 Customiser
S2U2 V 1.05
TT7

If you were using Mary SL you may add a couple of other items but this is more than enough for me.
I currently have 170.13 meg free Storage and 21.78meg Program Memory...that is having run it since Sunday without doing any re-sets....no turning the phone off etc.
All I do is pop it into the cradle when I get home and it syncs my e-mail, contacts etc and charges up.

The only reason I am keep trying other ROMs is I am hoping to find the perfect ROM....I know....wishfull thinking...lol

I got 156mb of free space! Running Mary 3.7SL without any problem 24 hours ago. I have cut quite a bit of software that I posted previously!!! Fingers cross!!

[Jackuuuuu]

Oh one more thing! We have a new hero, tnyynt is cooking a p3600i rom!!!

Keep a close eye on this thread:
http://forum.xda-developers.com/showthread.php?t=410477

[Jackuuuuu]

This time, even HR couldn't get pass the boot screen! WTF~? LOL

Tried a couple of times!

Reflashing now, I hope everything back to normal! :(

Mary 3.7SL

[desolateone]

This time, even HR couldn't get pass the boot screen! WTF~? LOL

Tried a couple of times!

Reflashing now, I hope everything back to normal! :(

Mary 3.7SL

Schaps 4.30 is the only ROM that has NEVER given me an issue.

I have tried all the ones that work and more.

[Jackuuuuu]

WTFFFFFF~~~

Reflash still stuck boot screen!!!!

What I did was this morning system restore everything with SPB Back up to yesterday.

Everything run as normal. Connect to BT stereo walk to work.

Stop music - but BT still on and BT device still on.

Received a phone call! Everything is fine. Then stucked after hang up!?????

Trying to flash other roms now!!! God!!!!

[Andych]

WTFFFFFF~~~

Reflash still stuck boot screen!!!!

What I did was this morning system restore everything with SPB Back up to yesterday.

Everything run as normal. Connect to BT stereo walk to work.

Stop music - but BT still on and BT device still on.

Received a phone call! Everything is fine. Then stucked after hang up!?????

Trying to flash other roms now!!! God!!!!

I had that issue yesterday with PDAViet37 and couldn't get it to re-flash. I removed Battery and left it for a few minutes and then flashed Mary 3.7 SL and all is good now. Running with it bare for now apart from TT7, but I am going to try something tonight....more news tomorrow I hope.

[Jackuuuuu]

Refalshing Mary twice not good! Had to flash to Karma! WTF!

This is annoying! So much work to do in my job as well! This is pretty annoying!!!!

[Andych]

Refalshing Mary twice not good! Had to flash to Karma! WTF!

This is annoying! So much work to do in my job as well! This is pretty annoying!!!!

OK I flashed the new PDAViet V4 and while it flashes OK there is still a BT problem with the P3600i.
I am back to Mary 3.7 SL with a few add-ons. I am no longer using S2U2 as I have a feeling it is causing some of the few resets I have had.
I had to load up Advanced config and HTC Task Manager as well as my normal Software.
So....lets see how this goes....

[kane81]

I had that issue yesterday with PDAViet37 and couldn't get it to re-flash. I removed Battery and left it for a few minutes and then flashed Mary 3.7 SL and all is good now. Running with it bare for now apart from TT7, but I am going to try something tonight....more news tomorrow I hope.

yep me too, I couldnt get it to pass the windows setup screen where you would normally start the touch calibration. just hanged on windows mobile green screen.

I only had tom tom installed no s2p or s2u.

Either way there is something really wrong with this workaround.....

[sydaroo]

yep me too, I couldnt get it to pass the windows setup screen where you would normally start the touch calibration. just hanged on windows mobile green screen.

I only had tom tom installed no s2p or s2u.

Either way there is something really wrong with this workaround.....
I finally gave up on WM6.1 due to all the annoying crashes and HR and installed a stock HTC SEA English OS. It's a WM6 and slightly slower than WM6.1, but not by much. The biggest thing I missed from WM6.1 is the threaded SMS, but I found a much better threaded SMS app (Vito SMS-Chat v1.1) that works on WM6, so I'm happy for now. This OS has been running very stable for the past 4 days. I'll wait until tytn's wm6.1 build for P3600i is ready before experimenting with another OS again.

[ie88]

Though I want to run a cooked ROM of WM6.1, none of them was stable with my p3600i so far. I had tried Mary, YAKA, PDAViet. They hanged sooner or later. Finally I gave up.

I have been using Schap v4.30 for a while. It is faster than the official ROM with better package. Need more time to test its stability and reliability.


ie88
Schap v4.3 WM6
Radio 1.56.70.11

[ssamth2003]

Pls try the new Karmba_a V10.1, its look very nice with new icon and 3G yellow icon. I just flash to my CHT9110 with no problem (you need 401 header as usual :) ).

[Jackuuuuu]

Pls try the new Karmba_a V10.1, its look very nice with new icon and 3G yellow icon. I just flash to my CHT9110 with no problem (you need 401 header as usual :) ).

Thanks for the info!!!!

Could you check whether you could pair with a BT device?

[ssamth2003]

Thanks for the info!!!!

Could you check whether you could pair with a BT device?


actually i dont use the bluetooth, but after try to pair ...say "problem with bluetooth hardware" :P

but the rom work very good till now. :)

[Jackuuuuu]

actually i dont use the bluetooth, but after try to pair ...say "problem with bluetooth hardware" :P

but the rom work very good till now. :)

Damn I need BT!!!
But I couldn't wait for you, it is flashing now lol

Damn!!!!!!!!!! No BT!!!!

BTW, Karmba thanks for your rom :)

[ssamth2003]

Damn I need BT!!!
But I couldn't wait for you, it is flashing now lol

Damn!!!!!!!!!! No BT!!!!

BTW, Karmba thanks for your rom :)


Hope it will some fix soon..:P

[gallevy]

Damn I need BT!!!
But I couldn't wait for you, it is flashing now lol

Damn!!!!!!!!!! No BT!!!!

BTW, Karmba thanks for your rom :)

Where i can get the karmba rom for p3600i? (please update the list).. and what is the problems in this rom untill now?
And how i change the header to 401?

[Jackuuuuu]

I have retried these by change header for these roms, will stuck at boot up screen: :(
Trinity WM 6.1 (CE OS 5.2.19965 ULTIMATE Edition by Akeo)
http://forum.xda-developers.com/showthread.php?t=411092

NiAx 6.1.40 WWE SO CE 5.2.19213 (Build 19213.1.0.4 )
http://forum.xda-developers.com/showthread.php?t=395935

[Jackuuuuu]

Where i can get the karmba rom for p3600i? (please update the list).. and what is the problems in this rom untill now?
And how i change the header to 401?

gallevy, refer to this page:
http://forum.xda-developers.com/showthread.php?t=398867

[joncgde2]

ahh sorry again lol uni is keeping me very busy :(

updated the list again with the karmba_a v10.1 diamond edition ROM

i've changed the header, if someone can just test it out and let me know if it works then i'll keep it up

otherwise i'll test it myself tomorrow

i also tweaked the list of non-working roms so thanks jackkkkk for posting those with links :)


i wonder how tynnt's experimental P3600i rom is going... lol


EDIT: ahh about 4 weeks now with not ONE hard/soft reset necessary... i must be lucky :D

[sydaroo]

Though I want to run a cooked ROM of WM6.1, none of them was stable with my p3600i so far. I had tried Mary, YAKA, PDAViet. They hanged sooner or later. Finally I gave up.

I have been using Schap v4.30 for a while. It is faster than the official ROM with better package. Need more time to test its stability and reliability.


ie88
Schap v4.3 WM6
Radio 1.56.70.11
ie88,

Can you post a link to Schap 4.3? I will give this a try. Thx!

[Jackuuuuu]

ie88,

Can you post a link to Schap 4.3? I will give this a try. Thx!

Check post one my frnd. :)

[Jackuuuuu]

ahh sorry again lol uni is keeping me very busy :(

updated the list again with the karmba_a v10.1 diamond edition ROM

i've changed the header, if someone can just test it out and let me know if it works then i'll keep it up

otherwise i'll test it myself tomorrow

i also tweaked the list of non-working roms so thanks jackkkkk for posting those with links :)


i wonder how tynnt's experimental P3600i rom is going... lol


EDIT: ahh about 4 weeks now with not ONE hard/soft reset necessary... i must be lucky :D

Thanks for the updating the list.

Note that, Bluetooth doesn't work with Karmba rom :(

tynnyt's experimental has been failed so far... same issue stuck at boot up screen.

Also, are you from Sydney?

[joncgde2]

Thanks for the tip about bluetooth, changes made :)

That's too bad about tynnyt's efforts... looks like the boot hanging mystery still eludes us lol... maybe we'll work it out sooner or later

And I'm from Melbourne... are you from Sydney?

[sgoldfel]

Hi,
Ihave problem with vibration .I bought the trinity 2 with this problem,the seller claim that it is becouse Mary v3.7 Rom.
Any body you have same problem?
If it's not the Rom problem,if there is vibration motors for trinity on Ebay?
Thanks.

[Jackuuuuu]

Thanks for the tip about bluetooth, changes made :)

That's too bad about tynnyt's efforts... looks like the boot hanging mystery still eludes us lol... maybe we'll work it out sooner or later

And I'm from Melbourne... are you from Sydney?

Cool man! I hope BT will be fix somehow... coz it's a very nice rom!

Yeah! I hope tynnyt could work something... like why Yaka 3.11 works but 3.12 wont... I'm not sure.

Yes, I'm from Sydney! OT: how do you get your Aussie flag on the right???

[gallevy]

Cool man! I hope BT will be fix somehow... coz it's a very nice rom!

Yeah! I hope tynnyt could work something... like why Yaka 3.11 works but 3.12 wont... I'm not sure.

Yes, I'm from Sydney! OT: how do you get your Aussie flag on the right???

Baybe the PDAVIET v37 blutooth patch can help with the karmba rom...
Anyone has any way to make it work?

[Jackuuuuu]

Baybe the PDAVIET v37 blutooth patch can help with the karmba rom...
Anyone has any way to make it work?

Hmmm figured as much. It didn't work on PDAViet V38 or V39 either.
When you changed the header did it strip out an extended ROM as well?
In PDAViet 38 & 39 there is an Extended ROM that includes a BT fix cab (at least in V39 anyway).
When I get home later on tonight I will post the BT fix from that ROM (I dumped it over the weekend) just to see if that works. Who knows....maybe changing the header effects the Extended ROM somehow?

PS The BT fix from the extended ROM is a vastly different size to Argyles BT fix, so I am assuming it is different.

Haven't heard from Andy since! Anyone else?

What a mystery! Why some rom can load but some can't? Making it even more, some versions of a particular rom works but not the latter version...

Strange!!!

[Jackuuuuu]

FInixNOver 3.5/3.5Light (Black) - Does NOT work!!!
http://forum.xda-developers.com/showthread.php?t=411235

I thought his work is based on Mary's rom... if so, then why all his rom stuck while Mary doesn't... ????

[ssamth2003]

http://forum.xda-developers.com/showthread.php?t=371201&page=3

for P3600i and CHT9110 user, I found another rom thats work with mind (CHT9110) and may work with HTC P3600i too, you have to change 401 header as usaul. 1 day use no problem..

[Andych]

Haven't heard from Andy since! Anyone else?

What a mystery! Why some rom can load but some can't? Making it even more, some versions of a particular rom works but not the latter version...

Strange!!!

Sorry guys...I have been sick...but watching as well.
No luck with that BT patch either way. While the ROM dumped and I can see the programs it doesn't create them in a way that they can be ported....well I haven't found a way yet.
I also had some discussions with tynnyt about the differences. It may well be in the Kernel, so even though the version or XIP are shown as being the same, there are differences which make it unworkable.
I am sure tynnyt is still trying to figure it out but he has had another release of his Trinity Roms and is out of communication due to a Business Trip and planning. So we should be patient for now.
I tried flashing Karmba_a V10 and got a corrupt error message so I haven't tried V10.1fix yet. What is the BT error that comes up?

[Jackuuuuu]

CHINESE ROM:
Oceanmoon i-Mobile_V1_Build_20273
http://forum.xda-developers.com/showthread.php?t=412265

This works.

[Andych]

CHINESE ROM:
Oceanmoon i-Mobile_V1_Build_20273
http://forum.xda-developers.com/showthread.php?t=412265

This works.

No good for me.....Its Chinese...hmmm does BT work in that one?

[ssamth2003]

CHINESE ROM:
Oceanmoon i-Mobile_V1_Build_20273
http://forum.xda-developers.com/showthread.php?t=412265

This works.


Now I'm back to original WWW from Dopod Asia WM6, 2 days work fine no significant ot hang up of freezz..iinstall with full soft that i always need (which hangup and freez on all cooked rom that i flash. some 1 min some fews day)
but keep watching for the stable and fast rom......

[Erasmuz]

Hello,

I just wanted to comment that it is good to see a good WM6 ROM listed on the front page.

Prior to HardSPL 3.20, P3600i users could not flash their devices at all. Now that they can I think it is beneficial to list both WM6 and WM6.1 ROM's that are compatible on the first page.

I realise it already comes with WM6 but we used to flash our devices with cooked versions of WM6 for all sorts of reasons previously.

For example I don't really care if I have WM6.1 or not, but I was after a good looking, fast ROM with built-in VOIP & RDP... The Schap v4.30 ROM posted on the 1st page is very good (not fast) and fulfils most of my requirements albeit WM6...

I've had Schap v4.30 installed for 24 hours and my device has not locked up or reset like it normally does with all the WM6.1 ROM's.

Just my 2 cents :) Thanks to everyone keeping this thread alive & for your input.

**EDIT** My phone was switched off this morning with 90% battery power remaining. It appears even the Schap ROM causes issues on the P3600i. I guess there is no choice but to return to the stock ROM until an alternative stable ROM is found. Thanks!

[vnt]

so which ROM is the best? or/and working ROM?

I flashed the p3600 ROM, there is an error with NAND 128 as p3600i is NAND 256.

I hope there will be a new rom for NAND 256 with core 20270

[Jackuuuuu]

so which ROM is the best? or/and working ROM?

I flashed the p3600 ROM, there is an error with NAND 128 as p3600i is NAND 256.

I hope there will be a new rom for NAND 256 with core 20270

Check couple post up, you will find the method overcoming the error.

[Jeff Lambadaridis]

Hi guys,
I have followed the instructions and successfully done a HARDSPL update, but when I try and do a ROM update, it verifies the version on my phone, asks me if I want to proceed, and then I select yes.
Then the phone itself displays a message saying do you want to run bootloader unauthorised application etc etc, and once I select yes, the phone switches off and therefore loses connection with the PC/activesync and the update fails. I then need to soft reset the phone and it boots up with the old ROM.

Any ideas or workarounds for this guys?

Cheers,
Jeff

[Jackuuuuu]

Hi guys,
I have followed the instructions and successfully done a HARDSPL update, but when I try and do a ROM update, it verifies the version on my phone, asks me if I want to proceed, and then I select yes.
Then the phone itself displays a message saying do you want to run bootloader unauthorised application etc etc, and once I select yes, the phone switches off and therefore loses connection with the PC/activesync and the update fails. I then need to soft reset the phone and it boots up with the old ROM.

Any ideas or workarounds for this guys?

Cheers,
Jeff

What version is your hardspl? 3.2?

[Jeff Lambadaridis]

What version is your hardspl? 3.2?

My bad, all good, I worked it out.
Got one of the ROMS going and phone freezes whenever I use MMS.
So I guess my questions is which is the best most stable ROM of all of these?

[joncgde2]

So I guess my questions is which is the best most stable ROM of all of these?

Well I would have said Mary SuperLite... BUT today I experienced my first hard reset :(

I put my phone down on the bench... next time I picked it up and pressed the power button to turn the screen on, everything was frozen.

Pressing the soft reset switch at the bottom didn't just perform a soft reset, but a HARD reset - the same effect as booting a ROM for the first time where everything was gone, messages, contacts, etc. Booting also took a VERY long time.

The significance of what happened to me, as opposed to others, is that I had practically nothing on it - as far as I can remember, only a dialler skin, and I doubt that this has caused an issue, so the problem must be inherent in the phone itself - not software conflicts per se - although conflicting software might be increasing the likelihood of this issue coming up.

So there you go... mind you, this is the first time it's happened to me ever, after around 6 weeks now of flashing? and 4 weeks on the same ROM.

gah

[joncgde2]

EDIT: PDAVIET v41 and Karmba v10.2 - Diamond currently being uploaded to mediafire, both work fine... not sure about bluetooth though :/


Been testing these two ROMs... Karmba_a seems sluggish, despite having a nice amount of RAM free (26MB) - switching back to PDAVIET shows a big improvement in responsiveness... PDAVIET it is for me (until my next crash lol)!


Just something that might interest some people... mediafire has stats for how many downloads per file, and Mary v3.7 - Lite is leading with 434 downloads! :O wow


Mary SuperLite has 221 downloads, and PDAVIET v37 has 218... exciting stuff lol

[Jackuuuuu]

Karmba 10.2 - bluetooth doesn't work!!! :(:(

[gallevy]

any one has the list of the files and the registry entry of the bluetooth from some working rom? maybe we can replace this files on karmba roms...

[Andych]

OK...well I tried PDAVIET 41 and it flashed fine.....but no BT....still comes up with the BT hardware error. I tried going back to previous Radio roms and it still didn't work.
An interesting thing I did notice though, when I check the Device information and compare it with the screenshot on the original thread....my Protocol Version shows 32.89.7020.20H where the PDAViet screenshot shows 32.83.7020.20H.
I figured this was just the difference between P3600i and P3600.
I then flashed back to PDAViet 37 as BT works well there and thought I would check the Device Info.....hmmmm 32.83.7020.20H WTF????
I also remembered earlier when I was running Karmba_a 10.1 fix that the Protocol was 32.89.7020.20H
Does this have some bearing...at least on the BT issue and why is the Protocol changing from the original to a different version, after changing the header?
Needs someone smarter than me to figure that out...

PS...the actual Protocol in PDAViet 41 may have been 32.86.7020.20H I really can't remember now.....but it was certainly different.

[vnt]

EDIT: PDAVIET v41 and Karmba v10.2 - Diamond currently being uploaded to mediafire, both work fine... not sure about bluetooth though :/


Been testing these two ROMs... Karmba_a seems sluggish, despite having a nice amount of RAM free (26MB) - switching back to PDAVIET shows a big improvement in responsiveness... PDAVIET it is for me (until my next crash lol)!


Just something that might interest some people... mediafire has stats for how many downloads per file, and Mary v3.7 - Lite is leading with 434 downloads! :O wow


Mary SuperLite has 221 downloads, and PDAVIET v37 has 218... exciting stuff lol

do you have BT working on PDAViet?

Thanks for your advice that i got my 3600i flashed with Karmba Rom... very fast and nice rom.
I do not have BT working at the moment...

[Jackuuuuu]

OK...well I tried PDAVIET 41 and it flashed fine.....but no BT....still comes up with the BT hardware error. I tried going back to previous Radio roms and it still didn't work.
An interesting thing I did notice though, when I check the Device information and compare it with the screenshot on the original thread....my Protocol Version shows 32.89.7020.20H where the PDAViet screenshot shows 32.83.7020.20H.
I figured this was just the difference between P3600i and P3600.
I then flashed back to PDAViet 37 as BT works well there and thought I would check the Device Info.....hmmmm 32.83.7020.20H WTF????
I also remembered earlier when I was running Karmba_a 10.1 fix that the Protocol was 32.89.7020.20H
Does this have some bearing...at least on the BT issue and why is the Protocol changing from the original to a different version, after changing the header?
Needs someone smarter than me to figure that out...

PS...the actual Protocol in PDAViet 41 may have been 32.86.7020.20H I really can't remember now.....but it was certainly different.

Anyone can help us please!!!!


Also, test tynyt's 015TNYSXY - doesn't work and will stuck on 'smart mobility' boot up screen :( I really want to try his sexy rom!!!! damn!!!!

[tnyynt]

Anyone can help us please!!!!


Also, test tynyt's 015TNYSXY - doesn't work and will stuck on 'smart mobility' boot up screen :( I really want to try his sexy rom!!!! damn!!!!
Guys, I'm sorry to bring you this but my ROMs will never work on your devices mainly because the kernel and the tools I use.

[Jackuuuuu]

Guys, I'm sorry to bring you this but my ROMs will never work on your devices mainly because the kernel and the tools I use.

Nah, don't be please! Big thank your for your time on creating roms!!! Just unlucky and pity that we can't use your rom! Really appreciated your time !!!!:cool:

[joncgde2]

Guys, I'm sorry to bring you this but my ROMs will never work on your devices mainly because the kernel and the tools I use.

What is the problem with our P3600i's? Does that mean you know WHY some ROMs don't work? Can you please tell us what the problem is?

I was looking forward to trying your new ROM too :(

[tnyynt]

What is the problem with our P3600i's? Does that mean you know WHY some ROMs don't work? Can you please tell us what the problem is?

I was looking forward to trying your new ROM too :(

I'm suspecting a few issues:
1. the kernel: nk.exe (this I can solve)
2. the physical addresses for the device are different since the device itself is different. I'm referring to address maps used in cooking (for instance, with insert.exe). I have tried to contact all chefs that have ROMs which have been reported to work on 3600i regarding this issue, but none of them answered. I'm kinda stuck and blindfolded since I cannot test.

[Argyle0297]

any one has the list of the files and the registry entry of the bluetooth from some working rom? maybe we can replace this files on karmba roms...

I already tried to replace the registry entries from pdaviet v.32 and bt files from 002TNYBSN - CE OS 5.2.19588 (Build 19588.1.1.4) WWE. None of them are working.

I found this in the working PDAVIET v.32 registry entry:

[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,17,83,8F,10,C4
"BTFirmwareVersion"="BT_Init_Script_TI_331.txt"
"BTCOMstatus"=dword:00000000

I found this in karmba_a v10.1:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,00,10,01,00,00
"BTCOMstatus"=dword:00000000

No matter how many times I changed this it always return to the second one.

With files replacement in the karmba_a v10.1 from PDAVIET v.32 , I manage to make my device stuck AFTER bootscreen (instead of showing today screen, it was only showing white screen).

I also tried to change the radio firmware to 1.46.30.11 since it was the last wwe version. No luck also.

[gallevy]

I already tried to replace the registry entries from pdaviet v.32 and bt files from 002TNYBSN - CE OS 5.2.19588 (Build 19588.1.1.4) WWE. None of them are working.

I found this in the working PDAVIET v.32 registry entry:

[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,17,83,8F,10,C4
"BTFirmwareVersion"="BT_Init_Script_TI_331.txt"
"BTCOMstatus"=dword:00000000

I found this in karmba_a v10.1:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,00,10,01,00,00
"BTCOMstatus"=dword:00000000

No matter how many times I changed this it always return to the second one.

With files replacement in the karmba_a v10.1 from PDAVIET v.32 , I manage to make my device stuck AFTER bootscreen (instead of showing today screen, it was only showing white screen).

I also tried to change the radio firmware to 1.46.30.11 since it was the last wwe version. No luck also.

If you said that after you change it return back... the only two ways that registry changes is:
1) manualy
2) by some program.. maybe in karmba rom there is some bt fix or some bluetooth explorer that at the boot load and change the registry to the default of the rom...

karamba: you have any solution? you have any idea why it changes?

[Jackuuuuu]

This one doesn't work!!!!

P3600 WM6.1 - ADW-edition - WWE
http://forum.xda-developers.com/showthread.php?t=396066

I need a stable rom! Mary 3.7 crashed!!!! Bloody hell! I'm seeking alternative degrading to Mary 3.6 to see any difference! If no good, then I will go back to cooked WM6 roms!

The hardreset downtime just so !@#$%^&*()_+ annoying!

[gallevy]

in the YK v3.11 the bluetooth work perfect... how we can take all the bluetooth parameters from this rom?

[Jackuuuuu]

Mary 3.6 working!!! BT working!!!
http://forum.xda-developers.com/showthread.php?t=359857

Testing! I will fill you guys in!!!

Anyone know what is the Task Manager in Mary 3.7? I like it very much. Nice and simple! This Task Manager also in Karmba roms!

[Andych]

in the YK v3.11 the bluetooth work perfect... how we can take all the bluetooth parameters from this rom?

Learn to cook.....but it aint that easy.

[vnt]

I already tried to replace the registry entries from pdaviet v.32 and bt files from 002TNYBSN - CE OS 5.2.19588 (Build 19588.1.1.4) WWE. None of them are working.

I found this in the working PDAVIET v.32 registry entry:

[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,17,83,8F,10,C4
"BTFirmwareVersion"="BT_Init_Script_TI_331.txt"
"BTCOMstatus"=dword:00000000

I found this in karmba_a v10.1:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Bluetooth]
"BTAddress"=hex:00,00,10,01,00,00
"BTCOMstatus"=dword:00000000

No matter how many times I changed this it always return to the second one.

With files replacement in the karmba_a v10.1 from PDAVIET v.32 , I manage to make my device stuck AFTER bootscreen (instead of showing today screen, it was only showing white screen).

I also tried to change the radio firmware to 1.46.30.11 since it was the last wwe version. No luck also.

That's the reason... bluetooth should have its address...

[Andych]

Try the BT hotfix found in the thread below.....
http://forum.xda-developers.com/showthread.php?t=380093&page=16

I am not in a position to try it right at the moment...but it iw worth a try.

[Argyle0297]

Try the BT hotfix found in the thread below.....
http://forum.xda-developers.com/showthread.php?t=380093&page=16

I am not in a position to try it right at the moment...but it iw worth a try.

Confirmed... Got BT with Karmba_a V.10.1.

Screenshot below.

Will try with Karmba_a V.10.2 later... downloading now!!

Great scouting Andych!!!!

:)

[Jackuuuuu]

Try the BT hotfix found in the thread below.....
http://forum.xda-developers.com/showthread.php?t=380093&page=16

I am not in a position to try it right at the moment...but it iw worth a try.

Andyyyyyyyyyyyyy

it !@#$%^&*())_ worked!!!! Thanks man!!! Now with Karmba 10.2 now :)

[Andych]

Guys
Suggest you all try out the NEW ROM cooked just for US by tnyynt. I have been testing it and it rocks.....BT works too.
I have donated as tnyynt has put in a lot of time and effort to do this for us....so show your appreciation...every little biy helps to keep these cooks around to continue their work.

[tnyynt]

315iTNY (original thread (http://forum.xda-developers.com/showthread.php?t=414792)): SXY (http://www.mediafire.com/?tyk5ywz4el8) | BSN | STD

Since there is no need for changing and tampering anything in my 3600i ROM, can I ask you to stop mirroring it? I need to have control over usage, feedbacks, etc.

[joncgde2]

Yeh no worries... the only problem is that the archive you've posted contains only the NBH file, and some people may not know what to do with this. I added the other files so it was easy to flash by running the exe with no fuss.

I've kept a link to your thread though, as a single listing here makes it easier for people to see at a glance what ROMs are available... saves a lot of time/effort/confusion in having to dig through thread after thread...

[tnyynt]

Yeh no worries... the only problem is that the archive you've posted contains only the NBH file, and some people may not know what to do with this. I added the other files so it was easy to flash by running the exe with no fuss.

I've kept a link to your thread though, as a single listing here makes it easier for people to see at a glance what ROMs are available... saves a lot of time/effort/confusion in having to dig through thread after thread...

Yeah, it's ok now!
I did not include the RUU since I don't know whether you guys are using the same RUU or a modified one.