PDA

View Full Version : SPL Olipro 2.40

kashabrown
18th June 2008, 09:41 PM
HELP!

My boss just bought a new XV6800 Verizon Titan. He wants to do what I have (flash with DCD, etc..). This is th situation - I cannot get Olipro 2.40 to connect to his device - I have placed it into bootloader mode and at present he has it set up with wireless sync - verizon server, etc...

This is the problem - I cannot get an activesync connection with either a vista or xp machine because he has set it so it will not duplicate his contacts/etc - so activesync is disabled.

HOW can I get olipro 2.40 to allow the flashing process (recognize and connect) to the device? I am going nuts!!

Thanks in advance...
:confused:
N715DP
18th June 2008, 09:47 PM
http://www.lifesnotsogood.com/dcd1182/titan/spl/
kashabrown
18th June 2008, 09:51 PM
I have olipro already - just need help connecting it... Thanks though N715DP :)
blueglide
18th June 2008, 09:54 PM
http://www.lifesnotsogood.com/dcd1182/titan/spl/

I think what he's saying is he has Olipro 2.4 but his boss has configured his device to not connect to Activesync via a USB cable and he has to do that for the bootloader flash. Couldn't your boss do a PIM backup...hard reset the phone which would erase the activesync settings on the device...then connect to your XP machine and let it connect to activesync via USB and unlock??
N715DP
18th June 2008, 09:55 PM
my bad, didn't read it clearly :rolleyes:
azclown
18th June 2008, 09:56 PM
Or tell your boss to do it himself....
BenjeeNy
18th June 2008, 09:58 PM
On XP, can't you set activesync not to synchronize anything (which would take care of the issue of duplicates) but still connect to the device? That's how I have it set up. If so, you can disable the synchronization, flash it, and then re-enable synchronization with activesync. Just a thought.
kashabrown
18th June 2008, 10:02 PM
If I do that - do a hard reset, do I put it into bootloader mode or boot into WM to flash olipro?
blueglide
18th June 2008, 10:22 PM
If I do that - do a hard reset, do I put it into bootloader mode or boot into WM to flash olipro?

Let it go into WM...then connect as usual...activesync should start and and save settings...then you should be able to flash as usual.
kashabrown
19th June 2008, 04:53 PM
Thanks guys - had to stay a little late at work, but I got it to work GREAT - I appreciate all you that helped!! :D:D:D