Despiadado1
23-06-2008, 04:27 PM
XDA - WIKI says Problem 4: Device is stuck in bootloader mode (tri-color screen)
Important : Windows VISTA users need to make a change to their system to successfully use many ROM packages. See Mr. Vanx's guide here
If you are using Windows XP or Windows 2000, you MUST have the Microsoft .net framework installed on your computer.
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!
if it doesn't unbrick, repeat all the steps but with the command set 16 0
Whomever it was that wrote this.... I LOVE YOU! :)
Important : Windows VISTA users need to make a change to their system to successfully use many ROM packages. See Mr. Vanx's guide here
If you are using Windows XP or Windows 2000, you MUST have the Microsoft .net framework installed on your computer.
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!
if it doesn't unbrick, repeat all the steps but with the command set 16 0
Whomever it was that wrote this.... I LOVE YOU! :)