confortable costumer
23-06-2008, 05:32 PM
I think I do right thing for all those crazy "that he likes to change ROM at least 3 times a day."
Problem: but when I install TTom / using the file *. cab not being installed on PPC? And then whenever I have flashing PPC must re-install and rehabilitate the maps! How can I prevent this from happening?
Simple: I install on SD and flasho when a new ROM should only create device \ windows \ start menu \ programs connect to the executable file TT7
This procedure is part of a memory linked to vers. 6,030 and 6,032
you need is as follows:
cabpack 1.4 available for free here http://www.larshederer.homepage.t-online.de/english.htm
winrar
a text editor (notepad)
extract cabpack in c: \ cabpack
Take the CD of original tomtom
and look for the following file: setuptt6.cab
1) copy on the desktop and extract the contents in c: \ tt
you will find the following files:
_setup.xml
0000DATA.001
0TTTODAY.005
BTCOREIF.003
NAVIGATE ~ 1,000
TTTODA ~ 1,007
00CAB503.009
0GO1108M.008
0TTTODAY.006
BTSDKC ~ 1,004
TTN6BT ~ 1,002
what we want in reality and 'only the first ie' _setup.xml
2) apriamolo with a text editor (notepad)
try the following item / characteristic> <characteristic type="FileOperation"> <characteristic type = "%% CE1 \ Navigator"
and modifichiamolo in / characteristic> <characteristic type="FileOperation"> <characteristic type = "\ Memory Card \ Navigator"
let's go ahead and almost towards the end we find
<characteristic type="Shortcut"> <parm name = "Source" value = "%% CE1 \ Navigator \ TomTom Navigator.exe"
that change in
<characteristic type="Shortcut"> <parm name = "Source" value = "\ Memory Card \ Navigator \ TomTom Navigator.exe"
At this point save the file
hours we should rebuild the file cabinet
3) go in the c: \ cabpack and launch cabpack.exe
set as in photos and press ok
4) after you in the c: \ tt a file named tt6ext.cab copy it into your handheld and tappateci above. verrà asked you to where you install it but left the inside as the destination of your handheld. à ¨ if everything went well at the end of installation you will find memory card in a folder called "navigator"
5) here, create a folder called copiateci inside voices and the voices you want
6) initiated tomtom and cross your fingers
HOW TO INSTALL UPDATING 6.0.30 PROVIDED BY HTC DIRECTLY ON MEMORY CARD
attention that the file will also find CE2%%%% CE11 (unidici and not one) that must be left as they are
Entire contarne 2 should be amended at the beginning of a file and one towards the end
recreated the cab following the instructions in step 3), 4) and 6)
Hence sw free to make the cab
http://www.softpedia.com/get/File-managers/CabPack.shtml
here the contents of the file _setup.xml of tt7
-- <wap-provisioningdoc>
-- <characteristic Type="Install">
<parm name="InstallPhase" value="install" />
<parm name="SetupDLL" value="1" />
<parm name="ProcessorType" value="2577" />
<parm name="OSVersionMin" value="3.0" />
<parm name="OSVersionMax" value="100.0" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="TomTom Navigator" />
<parm name="NumDirs" value="5" />
<parm name="NumFiles" value="6" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="0" />
<parm name="NumShortcuts" value="1" />
</ characteristic>
-- <characteristic Type="FileOperation">
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.exe" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TOMTOM~1.001" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="data.chk" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0000data.002" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\Windows" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="ttn6bt2003.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TTN6BT~1.003" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtCoreIf.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BtCoreIf.004" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtSdkCE30.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BTSDKC~1.005" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\TomTom" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TTToday.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0TTToday.006" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="%CE11%" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.lnk" translation="install">
-- <characteristic Type="Shortcut">
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
</ characteristic>
</ characteristic>
</ characteristic>
</ characteristic>
<characteristic type="Registry" />
</ wap-provisioningdoc>
At this point I / we lack a good (not like me) that individuals that values change for installation on sd and that maybe seats somewhere in the file tt7.cab version "installation on sd"
For me to change the values are
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
in
-- <characteristic Type="Scheda of memoria\Intern geheugen\Navigator" translation="install">
here I have doubts
-- <characteristic Type="\Windows" translation="install">
and here too
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
Waiting for a good
EXCUSE MY BAD ENGLISH
Problem: but when I install TTom / using the file *. cab not being installed on PPC? And then whenever I have flashing PPC must re-install and rehabilitate the maps! How can I prevent this from happening?
Simple: I install on SD and flasho when a new ROM should only create device \ windows \ start menu \ programs connect to the executable file TT7
This procedure is part of a memory linked to vers. 6,030 and 6,032
you need is as follows:
cabpack 1.4 available for free here http://www.larshederer.homepage.t-online.de/english.htm
winrar
a text editor (notepad)
extract cabpack in c: \ cabpack
Take the CD of original tomtom
and look for the following file: setuptt6.cab
1) copy on the desktop and extract the contents in c: \ tt
you will find the following files:
_setup.xml
0000DATA.001
0TTTODAY.005
BTCOREIF.003
NAVIGATE ~ 1,000
TTTODA ~ 1,007
00CAB503.009
0GO1108M.008
0TTTODAY.006
BTSDKC ~ 1,004
TTN6BT ~ 1,002
what we want in reality and 'only the first ie' _setup.xml
2) apriamolo with a text editor (notepad)
try the following item / characteristic> <characteristic type="FileOperation"> <characteristic type = "%% CE1 \ Navigator"
and modifichiamolo in / characteristic> <characteristic type="FileOperation"> <characteristic type = "\ Memory Card \ Navigator"
let's go ahead and almost towards the end we find
<characteristic type="Shortcut"> <parm name = "Source" value = "%% CE1 \ Navigator \ TomTom Navigator.exe"
that change in
<characteristic type="Shortcut"> <parm name = "Source" value = "\ Memory Card \ Navigator \ TomTom Navigator.exe"
At this point save the file
hours we should rebuild the file cabinet
3) go in the c: \ cabpack and launch cabpack.exe
set as in photos and press ok
4) after you in the c: \ tt a file named tt6ext.cab copy it into your handheld and tappateci above. verrà asked you to where you install it but left the inside as the destination of your handheld. à ¨ if everything went well at the end of installation you will find memory card in a folder called "navigator"
5) here, create a folder called copiateci inside voices and the voices you want
6) initiated tomtom and cross your fingers
HOW TO INSTALL UPDATING 6.0.30 PROVIDED BY HTC DIRECTLY ON MEMORY CARD
attention that the file will also find CE2%%%% CE11 (unidici and not one) that must be left as they are
Entire contarne 2 should be amended at the beginning of a file and one towards the end
recreated the cab following the instructions in step 3), 4) and 6)
Hence sw free to make the cab
http://www.softpedia.com/get/File-managers/CabPack.shtml
here the contents of the file _setup.xml of tt7
-- <wap-provisioningdoc>
-- <characteristic Type="Install">
<parm name="InstallPhase" value="install" />
<parm name="SetupDLL" value="1" />
<parm name="ProcessorType" value="2577" />
<parm name="OSVersionMin" value="3.0" />
<parm name="OSVersionMax" value="100.0" />
<parm name="BuildNumberMin" value="0" />
<parm name="BuildNumberMax" value="-536870912" />
<parm name="AppName" value="TomTom Navigator" />
<parm name="NumDirs" value="5" />
<parm name="NumFiles" value="6" />
<parm name="NumRegKeys" value="0" />
<parm name="NumRegVals" value="0" />
<parm name="NumShortcuts" value="1" />
</ characteristic>
-- <characteristic Type="FileOperation">
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.exe" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TOMTOM~1.001" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="data.chk" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0000data.002" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\Windows" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="ttn6bt2003.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="TTN6BT~1.003" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtCoreIf.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BtCoreIf.004" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
-- <characteristic Type="BtSdkCE30.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="BTSDKC~1.005" />
<parm name="NoOverwriteIfNewer" />
<parm name="Shared" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="\TomTom" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TTToday.dll" translation="install">
-- <characteristic Type="Extract">
<parm name="Source" value="0TTToday.006" />
<parm name="NoDateCheck" />
<parm name="WarnIfSkip" />
</ characteristic>
</ characteristic>
</ characteristic>
-- <characteristic Type="%CE11%" translation="install">
<characteristic type="MakeDir" />
-- <characteristic Type="TomTom Navigator.lnk" translation="install">
-- <characteristic Type="Shortcut">
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
</ characteristic>
</ characteristic>
</ characteristic>
</ characteristic>
<characteristic type="Registry" />
</ wap-provisioningdoc>
At this point I / we lack a good (not like me) that individuals that values change for installation on sd and that maybe seats somewhere in the file tt7.cab version "installation on sd"
For me to change the values are
-- <characteristic Type="\Intern geheugen\Navigator" translation="install">
in
-- <characteristic Type="Scheda of memoria\Intern geheugen\Navigator" translation="install">
here I have doubts
-- <characteristic Type="\Windows" translation="install">
and here too
<parm name="Source" value="\Intern geheugen\Navigator\TomTom Navigator.exe" translation="install" />
Waiting for a good
EXCUSE MY BAD ENGLISH