HardSPL problem, stuck in boot loader, with a fail HardSPL

[thom_yorke]

hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom :(

so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL

and now that i've flashed the new rom, i cant hardSPL again,,,,

I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz :(:(:confused:

IPL 2.20.0001
SPL 2.20.0001

[dioxda2]

hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom :(

so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL

and now that i've flashed the new rom, i cant hardSPL again,,,,

I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz :(:(:confused:

IPL 2.20.0001
SPL 2.20.0001

try the ................................

[ermenzegna]

ok, let me know about this ( i've found at WIKI )

Prophet Hard Reset Procedures
How to make a PROPER Hard Reset?
Method 1:

1. Press Camm & Comm button simultaniously. Keep them pressed.
2. Punch the little hole at the bottom with the stylus for a second or two.
3. Release the stylus (keep the buttons pressed!)
4. A white text-message appears on a black screen, telling you to press the send button
5. press the green button(the one you press to make a call).
6. Now, release the Camm & Comm buttons
7. The message on the screen tells you some more about formatting.
8. Release every button, you are done!


Done.... I had done untill number 3.
But a strange at number 4 and 5 !
I stand push Cam and Comm button while pressing green button, but nothing happen !!
Did I do wrong thing ? When I release Cam and Comm THEN I press green button, there is a massage that format FAILED !!!
plz give me a hint for this one ...

cheers,

ermen

[dioxda2]

ok, let me know about this ( i've found at WIKI )

Prophet Hard Reset Procedures
How to make a PROPER Hard Reset?
Method 1:

1. Press Camm & Comm button simultaniously. Keep them pressed.
2. Punch the little hole at the bottom with the stylus for a second or two.
3. Release the stylus (keep the buttons pressed!)
4. A white text-message appears on a black screen, telling you to press the send button
5. press the green button(the one you press to make a call).
6. Now, release the Camm & Comm buttons
7. The message on the screen tells you some more about formatting.
8. Release every button, you are done!


Done.... I had done untill number 3.
But a strange at number 4 and 5 !
I stand push Cam and Comm button while pressing green button, but nothing happen !!
Did I do wrong thing ? When I release Cam and Comm THEN I press green button, there is a massage that format FAILED !!!
plz give me a hint for this one ...

cheers,

ermen

4.1 release all buttons now,

( cancel step 6.)

OK??? :)

[ermenzegna]

4.1 release all buttons now,

( cancel step 6.)

OK??? :)

YES !!! I got message FAILED !. :eek:

[dioxda2]

YES !!! I got message FAILED !. :eek:

what failed??????

[atakatas]

1. insert stylus into the little hole (or press power button if your pda turned off) then release
2. immediately press both camera + comm buttons at the same time, wait..
3. on the black screen when you see that question (are u sure u want to format bla bla.. yes or no..), release your fingers.
4. press green button used for dialing..

i understand that you reached up to the format phase, but format is failed.
the image on your pda's rom is corrupted or it coudn't be successfully flashed, so i think you must flash again.

before trying to flash wm6.1, remember to hardSPL your device..

good luck!

[l3v5y]

hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom :(

so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL

and now that i've flashed the new rom, i cant hardSPL again,,,,

I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz :(:(:confused:

IPL 2.20.0001
SPL 2.20.0001There is this thing called the "wiki" that contains the answer to your problem. It's link includes the words "stuck in bootloader". Take a look, and you should be fine!

[l3v5y]

try the Lazy_Tool................................... http://forum.xda-developers.com/showthread.php?t=353547Your lazy tool needs an active sync connection! It's use here is wholly inappropriate.

[dioxda2]

Your lazy tool needs an active sync connection! It's use here is wholly inappropriate.

My intention is to help. Even not helpful, not harmful at all...... :)