D600, flashed a wrong nbh, now cannot flash any rom, can anyone help?

[xeroo]

A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.

I've tryed these below but none helps.

1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.

The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.

I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.

I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.

Any help is greatly appreciated!

[lionkng123]

plz, download any version of ROM as WWE, then connect your device with computer, enter BOOT LOADER, then just click the RUU.exe files, your device will formatted, think it will help you..:)
Download Link:-
http://forum.xda-developers.com/showthread.php?t=381048

[xeroo]

thank you for your help
I've tried that, but it didn't solve the problem. RUU got an error code 270 at progress 2% and my phone then reboot.

I forgot to write that RUU report error code 270 when flashing any rom at progress 2%.

[xeroo]

I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents

[mailforkrishna]

I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents

Could you please explain how to flash by sd card

[xeroo]

Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.

[mailforkrishna]

Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.

Thank you for sharing , but my phone didn't responded to it.
Anyway did you try to gene_cert_fix to fix certificate issue of rom before flashing

[xeroo]

It is said that not all gene phone will act, but most do.

I havn't tried the gene_cert_fix.
I found one via google and I'll try it later.
Thank you a lot!!!!

[shuaige100]

A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.

I've tryed these below but none helps.

1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.

The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.

I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.

I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.

Any help is greatly appreciated!

那个是骗人的，换字库吧呵呵。

[lionkng123]

Xeroo, is your provlem being solved?