View Full Version : Finally Telus HTC Vogue WM 6.1/GPS rom update
Aaron McCarthy
08-07-2008, 07:59 AM
Alright.. after much anticipation.. the rom release for the Telus HTC touch.
I randomly have been checking the site since I found the download page was updated on the HTC support page.. I ended up getting sick of the fact the the d ownload page was taken down so I copied down their server website and have been checking that. That is where the roms are actually upladed to so when the page is up it would link to the rom. Well on the server page (or whatever you call it) the telus update is there.
Check it out:
http://216.139.227.226/Telus/
So there we go. I'm going to flash my phone and see what goodies it does come with. Obviously rev A but I have my fingers crossed for gps too.
Oh and heres a direct link to the HTC support page for the Telus Touch... as you can see they havnt put up the download support page yet. So it was sort of a fluke I found this when I did as they havnt advertised it.
http://www.htc.com/us/FAQ_Detail.as...act=faq&cat=268
guardianfox
08-07-2008, 05:48 PM
Great work.
Everyone download it ASAP, in case it disappears.
EDIT: It works, but I lost my internet connection in the process.
guardianfox
08-07-2008, 07:52 PM
Great work.
Everyone download it ASAP, in case it disappears.
EDIT: It works, but I lost my internet connection in the process.
Had to call *22803 to program my phone (set PRL). That fixed the internet connection.
Rom works well, everything seems to be there. Have not had the chance to test GPS, yet.
babbar187
08-07-2008, 09:19 PM
will this work for bell phones too?
mikepasini
08-07-2008, 11:15 PM
i have been waiting for this rom for a while. i knew it was in development and if you are wondering, the official rom will include rev a, location based services such as gps in google maps, tom tom and is bundled with Telus Navigator. It will enable threaded text-messaging, eliminate most of the freezing issues and help with bluetooth reliability. it also has an auto-pair with common passwords for bluetooth acc so it will speed up the process. my question is mainly to the starter of this thread? the file date i downloaded from the ftp site, is dated a few days ago and you said that you just found it. this does not seem to come from the htc site directly as most downloads come from members.american.htc.com unless thats just a masked address. simply put, is this an offical release or a modified version of what is out there?
i installed it and it works quite well, but i noticed a few odd things with it. the XT9 predictive is now not an option and its automatic for free typing fields, but you can't just turn it on by choice. internet explorer has crashed on me a few times, but this is minimal as i was trying to use the zoom out function on a content rich page. also, overall,t he device feels a little sluggish while going through the menus, but overall program support is speedy enough..
.
also, i happen to know for a fact that the telus rom version is:
3.00.661.1
but what you offerred as a download is:
3.07.661.1
why is it that this one seems to be a newer than the official one that telus released?
mikepasini
08-07-2008, 11:17 PM
no, it wont work on bell, but the HTC website already has the bell update available... i don't believe the gps is unlocked for that model.
also, everytime you update the rom, all telus phones will lose their programming and you will need to OTASP... *22803 press 1 for english and 1 to program. as well, after it is done and the device resets... do the same, push 1 for english as well, but push 2 to upgrade the roaming list on your phone. it is import as you will have the most up to date preferred roaming list available from telus.
Aaron McCarthy
09-07-2008, 06:46 AM
Hi mike.. I actually have NO idea.. The link I had (which is down now by the way) is the main server address for HTC.. if you were to go to say.. the altell support page for htc and click their rom download it will direct you to the http: 216.139.227.226 bla bla altell. same with Bell and the others. When I had orginall found this I figured that it would be uploaded there before there was a link put back up in the telus page since last time they did that and didnt have the rom I'm pretty sure they were bombarded with tons and tons of emails saying "what is going on wheres our rom!!!"
That said I installed it.. everything works fine. explorer hasnt crashed on me but I havnt messed around with it alot. I did however notice that my internet speeds arent any faster then they were before. I'm downloading between 700 and 850 kbps. Sometimes faster. But that was the same with the previous rom that was already on the phone stock. It also says EV in the top menu and 1x when its downloading sometimes. Not Rev A. The connection says CDMA1X (dial-up).
In regards to GPS I havnt been able to get tomtom to recognize the internal GPS yet. I tried using the gps launcher program which is supposed to prime it I think but still doesnt lock on. Once I switch over to my external bluetooh gps receiver it locks right away. So I dont even know if GPS works. I installed the telus navigation program and it said it was looking up the gps status and then found me on their map but I have a sneaky suspicion this might be through data.. I dont know though cause it was pretty damned accurate. Maybe I just need to try another gps priming program or something. Frustatrating though.
For those of you who have installed this do you have the same data info I have? the EV in the top menu bar? I could have sword I saw some screen shots of the rev A updates and it shows Rev A in the top menu. Maybe its cause I dont have it in my area? But I'm in London ontario.. so not some boon out area in the middle of no where.
Thanks guys!
ps.. any ideas on getting tomtom to work withought my external would be kindly appretiated as well. If anyone has been able to do so with this rom.
mikepasini
09-07-2008, 06:59 AM
that sounds fair. i was just wondering if it was a hacked rom as i didn't want to bother upgrading it without something official. internet explorer hasn't caused me a single issue all day since then. i do find that the available memory has dropped to roughly 50 mb from about 70mb or so before with windows 6.0 and the device can get a little sluggish, but has yet to freeze on me once, which is a very noticeable improvement. thats interesting how the link was taken down and that would be really cool if we all got it in the nick of time. it wouldn't surprise me they pulled it with the touch diamond coming, it would be better to hold off and sell some of those and then launch the upgraded rom..
i can confirm gps works 100% for me. i used it in telus navigator and yes, it does use tower triangulation to assist in finding your location. i tried google maps and for some reason when i select "my location" it says my handset isn't compatible, but if you select use gps from the menu, then everything works 100% and my location shows right where you are and very accurately.
you said there is a program to prime the gps? where is that located? i still have yet to have an issue with it, but just in case. as well, i am unsure about the rev a icon, but it is still EVDO, just "revision A" i believe so i don't think the icon would change much
guardianfox
09-07-2008, 08:37 AM
link is dead, I've uploaded the file to rapidshare.
New thread on the subject.
http://forum.xda-developers.com/showthread.php?p=2385235
Quick version:
http://rapidshare.com/files/128290056/RUU_Vogue_4350_TELUS_WWE_3.07.661.1_Radio_4350H_3. 41.00_Ship_withPPSTPatch1.20.exe.html
tobeychris
10-07-2008, 10:48 PM
http://forum.ppcgeeks.com/showthread.php?t=31437
torawnto
14-07-2008, 02:41 AM
A huge thank you to Aaron for posting this rom. I had given up on my "bricked" Telus Vogue on Friday and if it hadn't been way too hot Friday to go, I would have already been to the Telus store and bought a replacement. Make a long story short (am a newbie too) something went horribly wrong with the flash I tried. The boot screen still displayed the old version (2.36 i think) but some random boot screen would follow and that as far as the boot got. I tried flashing tonnes of roms but just kept errorring out. I happened to sit at the pc today and noticed a few new posts and 20 min later came across the Telus update by chance. So for a final effort I slapped the HTC onto a USB and gave it a shot. The first try was unsuccessful as windows suddenly recognized the handset as a PPC rather than the mass storage device it had been seeing up till then and jumped to Found New Hardware Wizard. Or at least thats what I think may have interrupted the update. I shut down the update after waiting 20 minutes and simply started it again. It picked up where it left off and now I have my Vogue back even better than it was.
So the reason I went through this long saga is #1 to say thanks and #2 to let anyone that thinks they killed their Telus Vogue............INSTALL THIS ROM TO BRING IT BACK!!!!
JAY
Aaron McCarthy
14-07-2008, 07:28 AM
Jay,
Glad that this rom worked for you! Saved you alot of hassle with Telus I'm sure. I am already on my second touch from them as I had a dark spot on my screen show up about 3 months after I got my phone. So far this ones been pretty good and with this new rom even better. I've been reading up on some ways to increas the GPS sensitivity and locking on our phones and will post it in here shortly.
sailor_dude
15-07-2008, 08:04 PM
I will wait for someone to rip out the portion for the GPS to port it to Bell.
It should work in theory considering they are both the same phone/cdma.
Aaron McCarthy
16-07-2008, 10:39 AM
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
the settings should be as follows
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE
This process is a bit.. not tedious or anything but just safty's sale for a good read look at the thread linked below for a guide to getting the QPST program working.. how to get it to connect to your phone etc. Side note.. You have to install the WModem drivers on your computer in order for it to connect properly and you'll need to install the GetSPC program on your phone in order to get the service programming code. That said.. you also need to download the QPST program (obviously). All of which (including the guide) here: http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
You'll need to run the GetSPC program on your phone. when you open QPST and you add the COM4 port and you open the service programming it should say your ESN HEX at the top put that code into GETSPC (again GETSPC runs on your phone) and then it will generate your SPC..in the service programming click read from phone and enter the SPC it generated for your and it should work. Thats the code you need to get access into the phone via QPST.
Now follow that in order to connect to the program and go pretty much to where you have to put in all that information ghettofreeryder gave us. Make sure you redial the ##3424 code to get out of the settings in your phone.
Then once that's done. Download a1Jatts smartgps cab which will activate the smartgps in the registry of the phone. Do a soft reset and you are good to go. Make sure you put in ALL the right information. I forgot to put in an 8 in the PDE Port Number at first so I had 889 not 8889. I didnt get any quicker locks so checked and put in the right number and worked like a charm. I got locks on 6-7 satellites in my basement with a few seconds.
Paperless
19-07-2008, 06:21 PM
Alright..
...
PDE IP Address = 216.198.139.92
...
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
... I got locks on 6-7 satellites in my basement with a few seconds.
Wow. That procedure was really frightening. I got it working and it was well worth the hassle. Your addition (missing configurations) was needed for me too. I hope for poor average Telus users that they release a final ROM with this sorted out.
Edit:
Every time, before using this, an already established data connexion is needed BEFORE looking for GPS satellite. The GPS will not establish the connection if it's not there. A simple solution is to open Google map and move the map up to a download is required BEFORE making the GPS satellite connexion.
CyCLoBoT
20-07-2008, 05:31 AM
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
[I]Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
...
Would these instructions work for Bell Mobility HTC Touch?
Paperless
20-07-2008, 01:39 PM
Would these instructions work for Bell Mobility HTC Touch?
The wiki procedure have been experimented on many device/carriers.
But I think "PDE IP Address = 216.198.139.92" is carrier specific.
On another forum, a Bell user reported using the Telus leaked ROM with that procedure but with IP=195.207.101.126 and got it working well.
betathekid
08-08-2008, 08:41 AM
i tryed calling that number *22803 after updating rom from telus. still no internet connection. any reason why or what else i can do?
alexun
08-08-2008, 04:15 PM
First time i tried with Telus support center, they gote me goiing thrue the french portion of the programing (#2). After that did not work, I did it again in English and it worked perfectly.
So here it is in detailes.
Call *22803 + press 1 + press 1 again. Whait till its done then the phone will reboot.
Call again *22803 + press 1 + press 2. Dont remenber if the phone reboots again....
This should work.
If not, try pulling out your batery fo 15 sec. Then restart your phone.
Thats all the info I have got from telus service.
krazycanuck82
08-08-2008, 11:14 PM
i tryed calling that number *22803 after updating rom from telus. still no internet connection. any reason why or what else i can do?
first of all, write down the esn from the back of your phone!!!
go to settings - connections - manage existing connections.
you shoud see cdma1x #777click edit - next, next again,here you will see user name and password - you username should be your phone number 519#######@1x.telusmobility.com
password should be your esn
leave domain blank and hit finish
DCTelus
09-08-2008, 08:06 AM
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
[I]Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
Thanks for the help. Got it working with Google Maps now. Pretty round about way of doing what Telus should have done. I guess they couldn't charge you if they did though.
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
the settings should be as follows
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE
This process is a bit.. not tedious or anything but just safty's sale for a good read look at the thread linked below for a guide to getting the QPST program working.. how to get it to connect to your phone etc. Side note.. You have to install the WModem drivers on your computer in order for it to connect properly and you'll need to install the GetSPC program on your phone in order to get the service programming code. That said.. you also need to download the QPST program (obviously). All of which (including the guide) here: http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
You'll need to run the GetSPC program on your phone. when you open QPST and you add the COM4 port and you open the service programming it should say your ESN HEX at the top put that code into GETSPC (again GETSPC runs on your phone) and then it will generate your SPC..in the service programming click read from phone and enter the SPC it generated for your and it should work. Thats the code you need to get access into the phone via QPST.
Now follow that in order to connect to the program and go pretty much to where you have to put in all that information ghettofreeryder gave us. Make sure you redial the ##3424 code to get out of the settings in your phone.
Then once that's done. Download a1Jatts smartgps cab which will activate the smartgps in the registry of the phone. Do a soft reset and you are good to go. Make sure you put in ALL the right information. I forgot to put in an 8 in the PDE Port Number at first so I had 889 not 8889. I didnt get any quicker locks so checked and put in the right number and worked like a charm. I got locks on 6-7 satellites in my basement with a few seconds.
Thanks for the information. My upgrade with official Telus release from their web site did not work with Google Maps. It works perfectly now after applying the settings and a1Jatts smartgps cab.
Just a note about SPC, http://forum.ppcgeeks.com/showthread.php?t=31437 shows that the SPC is readily available in the windows folder, no need to use GetSPC.
rmarshll
12-08-2008, 02:07 PM
so will this procedure fix the GPS on the Telus Touch?... because I have seen the Bell Touch after their release and it connects everytime to 8 to 10 sats and the telus GPS is SHAT! only connects to 4 maybe and half the time it doesnt connect at all..
adilzz
15-09-2008, 02:15 AM
i followed your steps it didnt work com 4 wasnt evn showing up on qpst so i tried com5 with it said something like dianostic/usb something of that sort after i went throught ur steps
"the settings should be as follows
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE[/I]"
didnt work so i just cheked all of the settings under
Allowed
Assistanic-Spherical
something else
something else
something else
and finished it off wit
a1Jatts gps.cab
it worked i dono if it matters that i cheked everything can some one let me know?
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
the settings should be as follows
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE
This process is a bit.. not tedious or anything but just safty's sale for a good read look at the thread linked below for a guide to getting the QPST program working.. how to get it to connect to your phone etc. Side note.. You have to install the WModem drivers on your computer in order for it to connect properly and you'll need to install the GetSPC program on your phone in order to get the service programming code. That said.. you also need to download the QPST program (obviously). All of which (including the guide) here: http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
You'll need to run the GetSPC program on your phone. when you open QPST and you add the COM4 port and you open the service programming it should say your ESN HEX at the top put that code into GETSPC (again GETSPC runs on your phone) and then it will generate your SPC..in the service programming click read from phone and enter the SPC it generated for your and it should work. Thats the code you need to get access into the phone via QPST.
Now follow that in order to connect to the program and go pretty much to where you have to put in all that information ghettofreeryder gave us. Make sure you redial the ##3424 code to get out of the settings in your phone.
Then once that's done. Download a1Jatts smartgps cab which will activate the smartgps in the registry of the phone. Do a soft reset and you are good to go. Make sure you put in ALL the right information. I forgot to put in an 8 in the PDE Port Number at first so I had 889 not 8889. I didnt get any quicker locks so checked and put in the right number and worked like a charm. I got locks on 6-7 satellites in my basement with a few seconds.
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.