willing to pay if anyone can provide solution

[a1cellsolution]

Gene 100 stuck on bootloader mode
it is left with a tricolor screen with
ONBL 1.17.0000
SPL 1.10.olip

if i update any rom it says invalid update tool error 300
can any one provide a working solution

willing to pay

[bryangopan]

There is only one fix.... that is hard reset the device without even powering it on .....and please search the forum completely... i have also posted a video on YOUTUBE about this ...! :)

let me know how it goes.....

http://forum.xda-developers.com/showthread.php?t=375064 (http://forum.xda-developers.com/showthread.php?t=375064)

[bryangopan]

???????????????????????????

[akhil3216]

Gene 100 stuck on bootloader mode
it is left with a tricolor screen with
ONBL 1.17.0000
SPL 1.10.olip

if i update any rom it says invalid update tool error 300
can any one provide a working solution

willing to pay

Ahhh!!


i was having the same problem

Do the following steps !

1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.

2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.

3. Connect the USB cable. The text USB will appear on the bottom of the screen.

4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.

5. In the window that opened, type the following command (don't use copy paste please) and press enter:

Code:
set 32 1
You'll see a response from phone.

6. Type the following command BUT DON'T PRESS ENTER YET:

Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.

Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.

7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.

8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.

Congrats! you have successfully patched your SPL.

Do this step Carefully


Do THe all step again and listen carefully

After completing 5st step

5. In the window that opened, type the following command (don't use copy paste please) and press enter:

Code:
set 32 1
You'll see a response from phone.


type the next command in pc wait do not press enter Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I. <----------- This one


Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.

Hold camera button and then press enter

after that complete your further steps !!

hope it will work !! (Good Luck)

Sry for my bad english :D

(akhil3216@gmail.com):D

[akhil3216]

or if you are on vista or seven ,then

You need to take these steps :

1. Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.

2. On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".

3. Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.

4. Click Next and finish the wizard.

[krazy_about_technology]

Buddy, this is one year old thread. The guy who has posted it might have changed his phone, thrown it in the dustbin, or probably has solved his problem long ago. Why are u bumping it now? Try to check the date of the last post before posting man :)

[xaoup]

its bcuz the man is willing to pay ;)