PDA

View Full Version : ERROR 262 - stuck in bootloader


4irm
14th July 2008, 07:38 PM
hey Folks,

it seems i bricked my device while flashing the new PRO ROM.
After 91% i got an breakup and the update tool prompted error 262. Since then I stock in bootloader mode - no connection to windows xp can be established.

I have done the following things;
- tried tools like titan_exitbl oder mtty (can't tick the usb option)
- tried to flash an original rom via sd card (128mb) - it states searching sd card and then goes into bootloader

Again, i neither i can leave the bootloader nor establish an usb connection (even if the device shows on the left bottom usb after i 've connected it)


very thankful for any advises.
IRM

Erofich
15th July 2008, 12:25 AM
hey Folks,

it seems i bricked my device while flashing the new PRO ROM.
After 91% i got an breakup and the update tool prompted error 262. Since then I stock in bootloader mode - no connection to windows xp can be established.

I have done the following things;
- tried tools like titan_exitbl oder mtty (can't tick the usb option)
- tried to flash an original rom via sd card (128mb) - it states searching sd card and then goes into bootloader

Again, i neither i can leave the bootloader nor establish an usb connection (even if the device shows on the left bottom usb after i 've connected it)


very thankful for any advises.
IRM

is it version 3.06 of bootloader? if yes, thats known issue with this version of BL
that can be happen very rarely and if you are flashing official ROMs too, so thats not my bad
i can advice two things only:
1. try to use another microSD cards (from different manufacturers)
2. return it to HTC/Qtek

Sorry

4irm
15th July 2008, 08:24 AM
its 3.06...

thx,will send it back - of course its not your fault...

keep on your good work anyway!
cheers
IRM