Problem with SD

[gianlu91best]

Hi guys, i don't know how to use the SD card...well, i put it in the slot but i can't see it...can you help me???...thanks...

Sorry for my english, but i'm Italian! :p

[gianlu91best]

nobody know what can i do?!?
Help me please...:(

[krishan2207]

can u see the card on other devices like card reader.

[gianlu91best]

sorry but the only device that i have to read sd cards is my blueangel...
some ideas to resolve that problem???

[krishan2207]

sorry but the only device that i have to read sd cards is my blueangel...
some ideas to resolve that problem???


oh man! u must either try your sd card on some other device or try some other card on your BA. u can buy a card reader they are very cheap.

[gianlu91best]

I've tried the sd in an other device and it works and i've tried an another card on my ba and it don't see it...so, where is the problem?


sorry for my english!:eek::eek:

[gianlu91best]

PS: in memory there is wrote: memory not installed

[krishan2207]

PS: in memory there is wrote: memory not installed

dont worry few days back i hv repair my device. Here in all sd slots three pins are placed in order one above another. when we insert the card in unlock mode (without write protection) pin 1,2 and 3 get shorted. when in lock mode only 1 and 2 get shorted. shorting of 1 and 2 gives the presence of card and 2 and 3 gives the lock status. In your case pin 1 and 2 are not shorting.

Problems
1. the pin get damaged.
2. the pin get desolded.

:) i hv solution for both.

step 1 open ur device.
step 2 check the status of solded pins. (view images)
step 3 Re solder them.
step 4 if above does not work short the two points with a small wire.

if u hv applied the step 4 do not remove the card from the device for a long time as shorting of 1 2 gives the presence of card.

and if u r not comfortable with this send ur device to me.

[gianlu91best]

OK thanks....tomorrow i'll try to repair it...when i've done i'll advise you...thaks...:)

[gianlu91best]

just one more question...How can i open it???...thanks...:o

[krishan2207]

just one more question...How can i open it???...thanks...:o

search wiki for how to disassemble BA.

[gianlu91best]

well...yesterday evening i've opened my BA but i didn't find the pins that i have to control...where are they exactly????
thanks

[krishan2207]

look at the red arrows. U cant see the pins as they r behind the metallic protection on which numbers r written.

well...yesterday evening i've opened my BA but i didn't find the pins that i have to control...where are they exactly????
thanks

[gianlu91best]

ok...i've controlled the pins and they appear good but the problem perists...maybe i've not installed some driver or something like that...

[krishan2207]

i dont think so that u hv shorted the pins (1,2) and if u hv try some other rom.