BLANK SCREEN AFTER ATnT Screen and 3G screen..HELP

[Ghxoxst]

So i just attempted to flash my tilt.

These are the steps i did.

Used Jump SPL 1.56 Kais
Then flashed a Kaiser Custom RUU.exe

everything was good at this point.

I then attempted the Kaiser SUperCID tool

when i did the unlock radio is when the problem occurred. After initializing and completing the screen turned black and does not display anything after the 3g sreen. I have done several soft resets and am attempting to do a hard reset with the soft keys but all it does is restart the phone....

i am not able to do a hard reset via sys>clear storage since no screen is displayed

this is what my phone does show

the tri color screen is this

kais1*0
spl-3.28.Hard
cpld-8

and it says security unlocked above all of that.


The ATnT screen shows this

R 1.70.Olinex
G 25.65.30.04h
D 1.62.00.00

please help

[JimmyMcGee]

You need to follow step 0. Too late know. Which includes having an actual "RADIO" ready.

1.70OliNex is not a Radio. Thusly the Device can't load the Phone. Find a Radio and Flash it

Oh And Count this as your Freebie. Next time Search for your answer. And if you don't find the answer this should have been posted in the SuperCID thread.

[Ghxoxst]

Thank you kind sir. Off to look for a radio

[Alibaba0101]

Thank you kind sir. Off to look for a radio

Before you go off.

Here's something to try. The SIM/CID Unlocker do not work with the stock rom and you should have put hardspl on there.

Setup activesync and make sure that it detects your phone. As long as activesync works, you should be able to flash the stock rom and radio on the phone (even if the display is blank).

1st use jumpspl
then put on hardspl (read and follow the hardspl instructions)
then upgrade to 6.1 ROM
Then Unlock
then reflash with the rom of your choice with the matching radio

you should be good to go.

[Ghxoxst]

well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen... :(

well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1

[Alibaba0101]

well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen... :(

well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1

If you have hardspl on there, then just flash one of the cooked roms on the phone. I loaded the L26 Rom and it works great. It will include a radio firmware and is compatible with the SIM/CID unlocker.

[Ghxoxst]

the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?

[Alibaba0101]

the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?

Have you connected it to the computer via usb? Does activesync see the phone? You won't see anything on the phone itself until you correct the problem. As long as the computer activesync sees the phone you should be able to flash it from the computer.

[tramane]

I had the same issue
Just follow the steps
get the SIM unlock code from the computer
then flash a "real radio"
Once it finishes and boots up
it will ask you for the sim unlock code
AND VIOLA!!!

[Ghxoxst]

got it going

flashed it from my mini sd card after fat32 formatting it.

works like a charm

Thanks to everyone