PDA

View Full Version : G4 only boot loader mode


muksforu
25th July 2008, 08:41 PM
Hi.

here is the detail of my G4 when it is working fine

CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 35638400**********

=> Bootloaders:
IPL: 2.16.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL

=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.47.21
Protocol: 4.1.13.24

=>Extended_ROM:
Version: 2.20.7.114
Name: Extended_ROM
Status: hidden

=> Drives and partitions:
|--Handle--|---Size---|
cfb7d682 - 489.37M (0x1e95ee00)
ae9dc342 - 9.99M (0x9fd800)
4ea9a13a - 43.24M (0x2b3e000)
4fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)

=> DOC chip unique ID:
00000000da1e0107253302510104061f
Key Index: 23

but it show unknown main battery so i flashed it with spl 3.08
now it show only

IPL 2.16.0001

SPL 3.08

i flashed it with many other roms but not ableto repair my G4 can anyone tell me how to solve my problem..

thanx

scousemartin
25th July 2008, 09:49 PM
you have flashed it with a g3 spl and now you are screwed, your ipl is g4 your spl is g3 , thats not good. I doubt you can repair it yourself. I dont know of any remedy to this except sending back to the manufacturer

zabardast_1
26th July 2008, 05:43 PM
Very Very true what scousemartin has said,there's no remedy,its a Gonner!
Bad luck! :mad:

muksforu
27th July 2008, 09:59 AM
this problems comes form my stupid mistake....

but it happen due to spl 3.08 g3(s/w) flashing so may be there is some ways to repair if anyone know let me know..

i was fuck by myself.. :)

thnx

veda_sticks
6th August 2008, 04:03 PM
are you still able to power on your device and get to bootloader to allow flashing? find a rom that contains g4 ipl and spl flash that, its worth a shot if you can stil flash.

gablepr
11th August 2008, 08:33 AM
Hello

any other ideas in how to repair this problem?
I just grab a Wizard 100 from a friend that was playing with a new ROM an now is in the RGB screen and the IPL is 2.21.001 SPL 2.28.001.

When it power on you can seen the Wizard Love screen and then it goes to the RGB screen again.

I tried to run the Wizard Love ROM again but it do the same.

Thanks for the help or if any can refer to another threat.

zabardast_1
11th August 2008, 01:06 PM
Download and flash official stock rom to recover.

zabardast_1
11th August 2008, 01:06 PM
Deleted double post !