Keep Registry Settings: Howto

[jlove]

There occured some problems after doing this registry change, please read posts below.

Ok Guys and Girls,

Because noone could help me with my questiong on howto keep the Registry settings for Hiding Sim Contacts, I searched the registry myself.
After some hours of Try&Error i found the registry entry for flushing the registry on Power off and Soft Reset.

This will help a lot:)

1. Go into Registry with Resco or other regedit tool
2. Find Entry: HKEY_LOCAL_MACHINE\System\ObjectStore\Regflush
3. Change Value "ActivityThreshold" from "1" to "0"

Thats it. Have fun;)

Please test it and post here. If it does work for all, then please write it into the Diamond Tweak list.

Bye
j_love

[makeveral]

edit: Dont try this!! xD

[Menneisyys]

Ok Guys and Girls,

Because noone could help me with my questiong on howto keep the Registry settings for Hiding Sim Contacts, I searched the registry myself.
After some hours of Try&Error i found the registry entry for flushing the registry on Power off and Soft Reset.

This will help a lot:)

1. Go into Registry with Resco or other regedit tool
2. Find Entry: HKEY_LOCAL_MACHINE\System\ObjectStore\Regflush
3. Change Value "ActivityThreshold" from "1" to "0"

Thats it. Have fun;)

Please test it and post here. If it does work for all, then please write it into the Diamond Tweak list.

Bye
j_love



I don't want to offend you, but you could have saved those hours by just making sure you search / read my articles as is also mentioned in the sticky thread. I've explained the meaning of the value at http://www.pocketpcmag.com/old_blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1 .

"ActivityThreshold specifies the # of reg activity before we force a flush; [FlushPeriod:] Timeout period for a flush (flush occurs if there have been some changes during this period)... These settings cause the registry to flush when there are 256 changes or any changes within a second(which is probably too often.)"

Nevertheless, nice to know the Diamond comes with the default value of 0 and this is why it doesn't necessarily flush back changes to the flash storage. Very few (if any) models come with this setting.

[jlove]

Use this with caution!!! I have problems with my registry now!

@Menneisyys

Thanks for your Article. Have read through it but didnt find it in the forum.

Maybe you can help out a little:)
There is a problem with my registry now.
As you mentioned the value 0 is possible but now I cant change any registry entries. What do you think happend?
Maybe you can help out. What would be the best value to set?


Maybe people where the Registry is not being flushed can look at the value of ActivityThreshold and tell us.

Thx

[makeveral]

aff u fucked up my device to xDDD, anyone knows how to fix this?

omg phone not working and i cant even make a hard reset or flash another rom cos it acts like a disk drive and if i change to activesync it gets changed again to disk drive after some seconds :S

[jlove]

I did a Hard Reset and installed my apps again.
So I think there is no other way mate:) No Risk No Fun *GGG*

[makeveral]

I did a Hard Reset and installed my apps again.
So I think there is no other way mate:) No Risk No Fun *GGG*

yes did the same xD.Well time to flash new bepe's rom and configure it all again.


better change your first post so ppl dont make same mistake!!