Raphael Tweaks

[rhedgehog]

EDIT: This thread is not being made sticky by the Moderators for a good reason, so please stop asking them to. I have added a link to it to the wiki, and you can always subscribe to the thread for updates.....

I thought I'd try some of the diamond tweaks on the Raphael, just to see if any would work, and though i kinda figured they all would, it seems that in my particular case, some of them didn't, or at least didn't seem to.

ROM 1.66.405.1 WWE
Radio 1.02.25.11
RAPH100

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.

Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
The Raphael (and the diamond on 1.93) now ring and vibrate for incoming SMS, so this is not really necessary, but will turn the screen on if that’s what you want (I personally don’t).

Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
Working correctly

Boost TFL3D Scrolling Speed --> - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 or 32768 (DWORD decimal)
- To change it back to the default: - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
Did this using schaps advanced config and it does not seem to make any difference whatsoever.

Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0 doesn’t work either.
EDIT: this kinda worked when I tried it on the 1.90.405.1 ROM. the screen turns off once, but once you turn it back on, it stays on. YMMV.

Set HTC Album X button to close not minimize: ok_minimize change value to 0
Not needed any more. When task manager is set to close programs with the x button, album shuts correctly. Youtube on the other hand, doesn’t.

Disable Enlarged Title bar (when you click on a notification) to the default WM behavior: HKLM->Software->HTC->EnlargeTitleBar - and change "Enable" from 1 to 0.
Not needed any more. Start>settings>system>touchflo. Untick Show system status screen when status icons are tapped

Turn off startup aninmation and sound: HKEY_Local_Machine\Software\HTC\HTCAnimation\ -> rename both "StartupGif" and "StartupWav" to other names
Works, but does not speed up boot time.

Enable GPS photo: HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
Works

Another supposed TFL3D tweak for better performance: HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
No difference that I noticed, but no adverse affects either.

Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
Works fine. Can also be done in Schaps advanced config.

More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
Works. Keep button pressed down to take more pictures

To Enable 'Sport': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P8 -> change the value "enabled" from 0 to 1
Works. Takes 5 pictures in quick succession

To Enable 'Video Share': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 -> change the value "enabled" from 0 to 1
Works

Enable HSUPA:
HKLM\Software\HTC\AdvancedNetwork\SupportHSUPA =change it to 1
Already enabled, so no need for this.

Remove orphan icons and shortcuts - http://forum.xda-developers.com/show...97&postcount=3 (http://forum.xda-developers.com/showpost.php?p=2461697&postcount=3)
Erm, why not just delete them in File explorer for F***s sake??

Four icons in a row in WM Programs/Settings screens - http://forum.xda-developers.com/show...4&postcount=16 (http://forum.xda-developers.com/showpost.php?p=2462244&postcount=16)
Works a treat and looks pretty good too!

Remove Vertical and Horizontal Scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 0 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 0 (DWORD decimal)
Slight graphical distortion at the edge of the screen, but they are gone.

Disable SMS Conversation in WM 6.X
In Registry Editor: Create a folder named "OEM" in "HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settin gs"
In the new "OEM" folder, make a new DWORD key called "SMSInboxThreadingDisabled" and give it a value of "1"
OEM folder already exists, and adding the key to this folder works a treat, although any messages already in the system are lost. Back them up using something like PIM backup first.

I didn't get a chance to try them all as i only have the Raphael for a very limited time, so i tried the ones i was interested in first. I have the device for a few more days yet (Still allowed to borrow it from work for the time being) so i may try a few more and update this later on.

Need to make the most of my time here before I leave my job and don't get access to the devices again!:D:p:D

EDIT: more have been added and tried.

cab file including these tweaks - http://forum.xda-developers.com/attachment.php?attachmentid=104147&d=1217964322 - thanks to cliffgardner (and whoever created it if it wasn't you....!)

Smaller menus - http://forum.xda-developers.com/showthread.php?p=2473569 - thanks to techdave and ukdj78

[rhedgehog]

Hope the OP won't mind me popping in another post.

Since this is a sticky I decided to make it a little easier to come by the reg entries. I copy pasted all the registry entries found in the thread up to 23-9-09. I have not tested any of these reg entries so be sure to read the thread if you have doubts about the entries.

Boost TFL3D Performance:

HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Thanks to Tiggles

SIP responsiveness boost:

1. Export HKCR\CLSID (will save to a *.reg file)
2. Del or Rename HKCR\CLSID
3. Import the backup of HKCR\CLSID
Turn off your device about 15 sec and reset
Thanks to kheechun

Reply button instead of reply all button:

Found here: http://forum.ppcgeeks.com/showthread.php?p=424697
If you want to fix it you need to turn outlook enhancement off.
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""
then softreset
To turn it on
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"="\\windows\\OutlookEnhancement.dll"
Thanks to bussc067

Adjust screen sensitivity:

HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
Thanks to Ragin Cajun

No wakeup on slideout keyboard:

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0
Thanks to jackleung\at10ti0n

Enable GPS photo:

HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
Thanks to tadevinney

Faster keyboard responsivness when typing:

HKCU\ControlPanel\Keybd
Change InitialDelay from 250 to 50
Thanks to stevopativo

Enable manual network selection:

HKLM\Security\Phone and set ManualDisable to 0.
Then go to settings - phone - network and change the Network Selection to Manual and hit ’select’ next to that. It will take a few minutes but it will then find all of the networks in the area.
Thanks to emesbe

To have 4 columns to set:

HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\IconCo nfig
HorizontalIconSpacin g: 112
VerticalIconSpacing: 115

To have 3 columns to set:

HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\IconCo nfig
HorizontalIconSpacin g: 148
VerticalIconSpacing: 135
Tanks to 68knight

Wake Up on New SMS:

KLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
Thanks to aestis

Enable you to activate the flash during video record:

[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P2]
"Property"=dword:b3a
Thanks to rjmjr69

------------------------------------------------------------------------
Disable SIPs which You do not use
------------------------------------------------------------------------
[HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}\IsSIPInputMethod]
"Default"="0"
[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
"Default"="0"
[HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
"Default"="0"
[HKEY_CLASSES_ROOT\CLSID\{62B00599-25D2-4e09-8C48-03BF26DB8517}\IsSIPInputMethod]
"Default"="0"

------------------------------------------------------------------------
Show certificated in settings
------------------------------------------------------------------------
[HKEY_CURRENT_USER\ControlPanel\Certificates]
"Hide"=dword:00000000

------------------------------------------------------------------------
Disable Sound at start up
------------------------------------------------------------------------
[HKEY_Local_Machine\Software\HTC\HTCAnimation]
"StartupWav"=""

------------------------------------------------------------------------
Some cache tweaks for performance
------------------------------------------------------------------------
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00008000
[HKEY_LOCAL_MACHINE\System\GDI\SYSFNT]
"CS"=dword:00004000
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
"CacheSize"=dword:00002000
"EnableCache"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt]
"ReplStoreCacheSize"=dword:00001000

------------------------------------------------------------------------
Disable Menu animation and also disable finger menus
------------------------------------------------------------------------
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
"AniType"=dword:00000000
"CUIHandler"=dword:00000000

------------------------------------------------------------------------
Remove Opera Preload
------------------------------------------------------------------------
[HKEY_LOCAL_MACHINE\Software\Opera\Preload]
"RealExit"=dword:00000001

------------------------------------------------------------------------
Iris Browser preferences
------------------------------------------------------------------------
[HKEY_CURRENT_USER\IrisBrowser\Preferences]
"FitToWidthByDefault"=dword:00000000
"JavaScript"=dword:00000000
"Plugins"=dword:00000000
"PageOverview"=dword:00000000
"MaxDatabaseDiskUsage"=hex(b):\
00,00,50,00,00,00,00,00
"ApplicationCacheEnabled"=dword:00000001
"LocalStorageEnabled"=dword:00000000
"DatabaseEnabled"=dword:00000000
"BackingstoreMaxPixels"=dword:00200000
"HistoryViewMode"=dword:00000000
"GeolocationEnabled"=dword:00000000
"DefaultStorageLocation"=dword:00000000
"TextReflowEnabled"=dword:00000000
"ClickToPlayEnabled"=dword:00000001
"FileMappingEnabled"=dword:00000001
"KeepAwakeEnabled"=dword:00000001
"GSensorEnabled"=dword:00000001
"AlignedScrollEnabled"=dword:00000001
"CursorEnabled"=dword:00000000
"ViewportTagIgnored"=dword:00000000
"ViewMode"="Mobile"
"OverscrollEnabled"=dword:00000001
"AnimationsEnabled"=dword:00000001
"Popups"=dword:00000001
"EnablePrivateBrowsing"=dword:00000000
"AcceptCookies"=dword:00000001
"AutoLoadImage"=dword:00000001

------------------------------------------------------------------------
Quick Menu preferences
------------------------------------------------------------------------
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Disp lay]
"BkgroundMode"=dword:00000000
"BkgndCacheMode"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"BkgroundImage"=""
"SelectionAlpha"=dword:00000099
"MenuItemEdge"=dword:00000002
"ShowTaskClose"=dword:00000001
"BatteryMode"=dword:00000084
"WindowLeft"=dword:000000c0
"ShowAppIcon"=dword:00000000

[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Gene ral]
"AutoEndSyncTask"=dword:00000001
"TEditWhenEditing"=dword:00000000
"LongPressAppIconFunc"=dword:00000000
"EnableXButton"=dword:00000002
"OkKeyEndTask"=dword:00000000
"RightArrowEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000000
"CacheImageIndex"=dword:00000001
"AutoStart"=dword:00000001

------------------------------------------------------------------------
Do not load Opera ay startup
------------------------------------------------------------------------
[-HKEY_CURRENT_USER\Software\HTC\BootLauncher\Opera]
[-HKEY_CURRENT_USER\Software\HTC\BootLauncher\Apps\O pera]

------------------------------------------------------------------------
USB connect
------------------------------------------------------------------------
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\HTCUSBToPCPopUp]
"Description"="USB To PC PopUp Service"
"DisplayName"="HTCUSBToPC Service"
"Context"=dword:00000000
"Keep"=dword:00000001
"Flags"=dword:00000000
"Order"=dword:0000000a
"Info"=dword:00000000
"Index"=dword:00000000
"Prefix"="UTP"
"Module"="\\Windows\\HTCUSBToPCSrv.dll"

------------------------------------------------------------------------
Clock
------------------------------------------------------------------------
[HKEY_CURRENT_USER\Software\Microsoft\Shell]
"AnalogClock"=dword:00000000

------------------------------------------------------------------------
Soft keys
------------------------------------------------------------------------
[HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2]
"Open"="\\Program Files\\S2U2\\s2u2.exe"
"Default"="s2u2"
[HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 3]
"Open"="\\Storage Card\\Program Files\\folderview.exe"
"Default"="FolderView"

------------------------------------------------------------------------
Increase IE cache
------------------------------------------------------------------------
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings\5.0\Cache\Content]
"CacheLimit"=dword:00005000
Edit/Delete Message

------------------------------------------------------------------------
Thanks to tahdor

[Jorlin]

Thank you for testing :D
Any comments on the device itself. Especially things that differ from the Diamond e.g. the keyborad quality, sliding mechanism, landscape touchflo, camera with flash...

[rhedgehog]

LED camera light is woefully awful, as is every LED on HTC phones (Not that there have been many)

Keyboard is nice and clicky, and a godsend after the horrors of an athena keyboard. Buttons are well shaped and even though they are quite close together and i have fat fingers, i only have a problem when typing the letter A, where i keep going one key too far left and hitting the caps lock instead.

Sliding mechanism on mine feels pretty solid, and is semi-automatic like the one on the p4350, and slides into place with a satisfying click.

As Arne Hess said on the unwired, the landscape touchflo is pretty basic, just a screen with 8 icons on it, and it does look pretty bland, but it does the job well.

The only thing i have noticed about sliding out the keyboard (and this may be because it is an early ROM) is that when i slide out the keyboard to type something, i have to wait a second or so for the cursor to start flashing. if i press a key straight away, then no matter what program i am in, it jumps to the landscape touchflo.
If i wait for the cursor to start flashing (at most a second), then it works perfectly.

Just a little thing, and nothing that annoys me, but i know it may annoy some people.

[Black93300ZX]

Am I allowed to ask how you happened across a Raphael before its release? I'd like to get my hands on one however possible to test that damn AT&T ROM and see how goes. :)

[rhedgehog]

Same way the other guys here get devices before they are released.
Although i won;'t have it for much longer, maybe another week if i am lucky.

[cliffgardner]

This was developed for the HTC Touch Diamond but works flawlessly on the Pro (Raphael).

:D

[ukdj78]

This was developed for the HTC Touch Diamond but works flawlessly on the Pro (Raphael).

:D

Thanks, I'll download that now ready for when mine arrives - looks useful judging by it's filename :D

[rhedgehog]

cool.
The cab file for adding the call history tab didn't seem to work for me. i just got stuck on the 'tap here to launch TF3D' page. as soon as i uninstalled it, tf3d came back.
I might try this and see how it works.

[twisted-pixel]

what are people using to edit the registry....advanced config doesn't seem to let me into this.

thanks

[Black93300ZX]

what are people using to edit the registry....advanced config doesn't seem to let me into this.

thanks

PHM RegEdit, search.

[twisted-pixel]

thanks...which version though? the active sync one wont work and the cab file gives me arm, mips etc.

[Syphon Filter]

Has anyone with a UK Raphael with the following specs tried the above tweaks.

ROM Version: 1.90.405.1 WWE
ROM Date: 08/01/08
Radio Version: 1.02.25.19
Protocol Vesion: 52.33.25.17U

I have a UK HTC Touch Pro with the above ROM etc and my TouchFlo seems pretty quick as it is.

Just wondering if applying the tweask when you're ok would cause any issues.

[onderduiker]

My "old" networkplugin (JUVS HTC Network Plugin) installs on the touch pro, but I can't find it on the menu.
Anyone ?

[Syphon Filter]

My "old" networkplugin (JUVS HTC Network Plugin) installs on the touch pro, but I can't find it on the menu.
Anyone ?

What does the plugin do?

Also maybe it doesnt go into the start menu, you may find it in the Programs folder?

[onderduiker]

What does the plugin do?

Also maybe it doesnt go into the start menu, you may find it in the Programs folder?
Normaly it it gives me a network folder in file-explorer. So I can read my netwerk shares when I am on my wifi network.
I can't find in on the the device :confused:

[MikeChannon]

thanks...which version though? the active sync one wont work and the cab file gives me arm, mips etc.

Arm


Mike

[ukdj78]

Has anyone with a UK Raphael with the following specs tried the above tweaks.

ROM Version: 1.90.405.1 WWE
ROM Date: 08/01/08
Radio Version: 1.02.25.19
Protocol Vesion: 52.33.25.17U

I have a UK HTC Touch Pro with the above ROM etc and my TouchFlo seems pretty quick as it is.

Just wondering if applying the tweask when you're ok would cause any issues.

Yeah... All the ones that he said worked also worked fine on mine ;)

[Blob8me]

cool.
The cab file for adding the call history tab didn't seem to work for me. i just got stuck on the 'tap here to launch TF3D' page. as soon as i uninstalled it, tf3d came back.
I might try this and see how it works.

This one worked fine for me:

How to install:

1. Disable touch flo 3d.
like this: goto Start->Settings->Today->Items-> Remove the "v" from Touchflo 3d.
2. Intall my cab (Thanks for Fabliv and Bepe for the idea and files):

if you have rom 1.93.831.1 WWE:
http://rapidshare.com/files/132273300/Nadavi_Nadavi-Call_History_Diamond_TouchFlo.cab

if you have rom 1.37..xxx.x WWE:
http://rapidshare.com/files/132350894/Nadavi_1.37__Nadavi-Call_History_Diamond_TouchFlo.cab

3. soft reset.
4. Put Touch flo 3d back on, Same as step 1.

The result:
http://forum.xda-developers.com/attachment.php?attachmentid=100817&d=1216668168
(thanks Fabilv for the image).

Note: This will only work if you have the original Theme, did not tested it with other themes (o2,Vodafone,Orange)...

Enjoy,
Nadavi.

[ukdj78]

DO NOT ENABLE CLEARTYPE IN LANDSCAPE MODE WITH ADVANCED CONFIG ON THE RAPHAEL!

On my one it appeared to work fine, but I've just realised it causes a problem when typing in landscape mode on certain programs including entering urls in Opera - you can't actually see what you're typing at all until you go back to portrait mode!

It might be worth creating a separate thread for this to draw everyone's attention to it (I'll leave that up to the mods to decide), cos I enabled it straight away (well about an hour after I started playing with my Touch Pro)

I noticed the problem Friday night, but I've only just discovered what's causing it. I did a hard reset and starting doing tweaks one by one and soft resetting after each one, it's definitely cleartype in landscape that causes the problem.

[ukdj78]

Just found this registry tweak over at the Diamond forum which works fine on the Raphael, thanks to techdave:

http://forum.xda-developers.com/showthread.php?p=2473569

[WatskeBart]

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.

These 2 tweaks are awsome speeded up my TFlo times 10 :eek:

Do u know the registry edit for the first tweak, so i can put it in my cab file?

Great work

[lbhocky19]

These 2 tweaks are awsome speeded up my TFlo times 10 :eek:

Do u know the registry edit for the first tweak, so i can put it in my cab file?

Great work

i dont have one yet but just so i know when it finally comes out here
are these changes made direcly on the phone settings or do i need a reg editor?

[grahamrb]

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768[/FONT]
Much quicker than number 1 on it’s own, now stonkingly fast.[FONT=Tahoma]


my Cachesize is currently 0??!?

[WatskeBart]

i dont have one yet but just so i know when it finally comes out here
are these changes made direcly on the phone settings or do i need a reg editor?

The first TFL3D tweak u can do with the tool AdvancedConfig v2.1.0.0 from Schap.
New version v3.0 is out now but haven't tested it yet.
http://forum.xda-developers.com/showthread.php?t=317070

For the second TFL3D tweak u have to edit your registry. I used dotfred's taskmanager v3.1 to do that.

[WatskeBart]

my Cachesize is currently 0??!?

That's odd well did u try to change it to 32768?

Because this setting works like a charm on my Raphael

[grahamrb]

That's odd well did u try to change it to 32768?

Because this setting works like a charm on my Raphael

even more odd, I just did a soft reset and now it is on 16384.

[thebiscuitboy]

Have downloaded the new advance config 3.0, but it looks like I need to instal .NET Compact Framework 3.5 now ?

[grahamrb]

Have downloaded the new advance config 3.0, but it looks like I need to instal .NET Compact Framework 3.5 now ?

http://www.microsoft.com/downloads/details.aspx?FamilyID=e3821449-3c6b-42f1-9fd9-0041345b3385&displaylang=en

Enjoy!

[kempas]

What's extra in 3 that wasn't in 2...?

[WatskeBart]

What's extra in 3 that wasn't in 2...?

To much to mention look here: http://forum.xda-developers.com/showthread.php?t=317070

[thebiscuitboy]

http://www.microsoft.com/downloads/details.aspx?FamilyID=e3821449-3c6b-42f1-9fd9-0041345b3385&displaylang=en

Enjoy!


Thanks but this version if 33mb :eek: isn't there a mobile version :)

[WatskeBart]

Thanks but this version if 33mb :eek: isn't there a mobile version :)

It's 33megs allright but it doens't install it all on your PPC partly will be installed on your PC the rest will go to your PPC.

[thebiscuitboy]

Excellent, have just tried the BoostTFL3D and it really is so much better :D

[ronh]

Can somebody help me?
I've search this section and the one about the TD, but couldn't find a solution.

In Touch-Flo, if you press an Icon, ie People, it instantly wants to (pre)load the pictures. (And in Mail the opening envelop, etc.)
That takes a few seconds, and at that moment it won't scroll through the icons.

When you keep it pressed longer, you'll get the small icon big in the upper screen.
And then my Touch-Flo is very fast, with the tweaks I've read here.

But how do I tell the Raphael not to get the actual info, but first give me the big icon of the section, Home, People, Messages, Mail and so forth?
That way touch-flo works fine.

And at the Diamond it works alright: It first gives the big icon in the upper screen, and after you release your finger it opens that section, displaying the contents

[woeds]

Couple of questions

Is there a way to set the duration you need to press the End call button for the DeviceLock to kick in?

Is there a way to add a program to the TF3D programs list that is not properly installed? I have an application which I installed by moving a directory to my SD card. I'd link a link to that executable on the TF3d programs screen

[ukdj78]

Is there a way to set the duration you need to press the End call button for the DeviceLock to kick in?

Not sure about setting the duration for pressing the button, but in "settings/system/Long Press End Key" there's a pretty useful option, always display the Quick List which adds a lot more functionality to the end call button as well as just the DeviceLock.

Sorry if you already knew that, but I have found it really useful and it took me a couple of days to spot it! ;)

[aszotten]

I tried to enable the GPS Photo option. I have changed enable from 0 to 1 but I can not find the GPS option anywhere in the camera application. (and yes, I have done a soft reset)

[rhedgehog]

Is there a way to add a program to the TF3D programs list that is not properly installed?

As far as I know, it just pulls the list of programs from the programs menu.
Shove a shortcut for the program in \Windows\start menu\programs and see if it picks it up.

But how do I tell the Raphael not to get the actual info, but first give me the big icon of the section.....From how you describe it, i am afraid to say it sounds like user error.
Make sure that you tap and slide, starting at the icon of the tab that you are currently on. for example, when you are on the home tab, tap on the home icon and then slide it across to the weather icon to open the weather tab.

If you tap on another tab than the one you are on, Touchflo goes straight to that tab. That's what it's supposed to do.

[woeds]

As far as I know, it just pulls the list of programs from the programs menu.
Shove a shortcut for the program in \Windows\start menu\programs and see if it picks it up.
Thank you so much! that did the trick

[ronh]

From how you describe it, i am afraid to say it sounds like user error.
Make sure that you tap and slide, starting at the icon of the tab that you are currently on. for example, when you are on the home tab, tap on the home icon and then slide it across to the weather icon to open the weather tab.

If you tap on another tab than the one you are on, Touchflo goes straight to that tab. That's what it's supposed to do.
Thanx, that does the trick. :o

But nevertheless it's weird that a Diamond doesn't do that??

[rhedgehog]

Thanx, that does the trick. :o

But nevertheless it's weird that a Diamond doesn't do that??

I think it depends on the ROM on the diamond. If i remember rightly, the 1.35 and 1.37 ROMs did exactly that but i don't think 1.93 does (or not that i have noticed anyway, not really paid attention the last week or two). You could start the slide from anywhere. The earlier Diamond ROMs also had a little more animation on the touchflo, such as the pages fading in from the side as you selected them. The later ROMs and the Raphael don't do that. Seems HTC decided to make the device run nice and quick and sacrifice just a tiny bit of the shininess. good job too i think.

[Jimllfixit]

Has anyone developed a Keyswop for the Diamond yet, as i would really like to change the two shortcuts "Phone" and "Program" on my screen.

Regards

Rich

[GlobalM3]

Great thread guys!

Keep up the good work

[mrvanx]

As part of our attempt to get members to utilise the wiki pages a bit more, members are free to add the info from this thread to the HTC Raphael Tip & Tweaks page (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Tweaks).

Hint hint ;)

[Noonski]

As part of our attempt to get members to utilise the wiki pages a bit more, members are free to add the info from this thread to the HTC Raphael Tip & Tweaks page (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Tweaks).

Hint hint ;)

Oeps Mishap on my side

I have added the tweaks i had on
HTC_Raphael_Specific_Registry_Tweaks

To

HTC Raphael Tip & Tweaks page (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Tweaks)

Now let's actually read this thread.

[GlobalM3]

Oeps Mishap on my side

I have added the tweaks i had on
HTC_Raphael_Specific_Registry_Tweaks

To

HTC Raphael Tip & Tweaks page (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Tweaks)

Now let's actually read this thread.
Im an idiot but that link doesnt have all the tweaks from this thread.....

Why dont we sticky this thread its very helpful

[mixmaven]

The hope is that someone will take the time to copy and paste all of the tips and tricks out of this thread into the wiki. I always like when a mod can keep the thread clean and edit the first post with tips.

[kareeem]

This is a very useful thread for all Raphael owners. Maybe somebody who's good with cab-making can integrate all these regedits into an xml which can be run by an executable to make it easier for others; just an idea.

[GlobalM3]

The hope is that someone will take the time to copy and paste all of the tips and tricks out of this thread into the wiki. Iys like when a mod can keep the thread clean and edit the first post with tips.

is this mixmaven with the bluetooth nextlink headsets????

[mixmaven]

The funny thing is two weeks ago I cleaned out an old box and found like 200 nextlink headsets, 3 bluespoons, and 5 5G's (2 very custom) and all sorts of other stuff (invisio, spare parts, etc.) 90% went in the trash. When the good engineers left, I didn't bother any more.

-mix

is this mixmaven with the bluetooth nextlink headsets????

[GlobalM3]

This is a very useful thread for all Raphael owners. Maybe somebody who's good with cab-making can integrate all these regedits into an xml which can be run by an executable to make it easier for others; just an idea.

There actually is a .cab file created on the first page. It has allot of these tweaks built into it. I found it to be very very helpful and made my phone night and day difference.

Thanks!

[jerrry]

thank you for the tips and tweaks. Maybe It will be useful, if somebody created a XML for Advanced Config (like is for HTC Touch Diamond)...

[MaRaHoX]

Jerry, that try to use Advanced Config for Diamond, is the same and there are now compatibility issues. I just applied it.

[dmsr66]

This Thread have to be in Sticky mode !

Very Useful, keep it update :)

[th1nm1nt]

Anyone figure this one out yet...

Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0 doesn’t work either.

Nothing ticks me off more than trying to read an email to someone while on the phone, and having to hit the power button 20 times every 3 seconds to relay two words at a time.

Thoughts???

[aaswouw]

I thought I'd try some of the diamond tweaks on the Raphael, just to see if any would work, and though i kinda figured they all would, it seems that in my particular case, some of them didn't, or at least didn't seem to.

ROM 1.66.405.1 WWE
Radio 1.02.25.11
RAPH100

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.[FONT=Tahoma]


Maybe a stupid question, but I'm kinda new at this so bare with me :)
When I've done the two tweaks and I'm going back to the first tweak to check if my system has done everuthing correctly, I notice that the "File system cache" is no longer on 8mb but on 32768 (like the value for the second tweak).
Is this supposed to happen?

I also noticed that after these two tweaks and a soft reset later, TFL3D takes a lot longer to load then before the tweaks. Is this normal?

[twisted-pixel]

I've just tried changing the comm manager on/off buttons so I could switch 3G off when I wanted.

The default ones were

Flight Mode
Phone
Wireless Lan
MS Direct Push
Bluetooth
Data Connection

it only allows 6 so I changed to

Wireless Lan
Bluetooth
MS Direct Push
Data Connection
Activesync
3G


but, after a reset and a look in the comm manager, 3G and data connection are greyed out and cannot be switched...is this normal?

[ronh]

Anyone figure this one out yet...

[INDENT]Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
I had the same problem.
The first key didn't work for me.
Then I Changed both keys at the same time.
Don't forget a power cycle, nescessary for the change to activate!
And that did the trick for me.

[rhedgehog]

could be that they work with the newer ROMs. Don't forget that i tested these with the 1.66 ROM, not the 1.90.

Will test today and edit the original posting to reflect the change if necessary.

[twisted-pixel]

Anyone figure this one out yet...

Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0 doesn’t work either.

Nothing ticks me off more than trying to read an email to someone while on the phone, and having to hit the power button 20 times every 3 seconds to relay two words at a time.

Thoughts???

I thought about doing this tweak, but I think it's designed to stop you ending the call, or putting mute etc by accidently pressing the buttons on the screen when holding the phone to your ear.

[rhedgehog]

Just tried it on my 1.90.405.1 ROM, and it kinda works.

the backlight still goes off after 3 seconds, but if i press the power button, it then stays on indefinitely.

That seems to be perfect for me, cos i don';t usually need it to be on, but it certainly is damn annoying when i do need it and have to keep pressing the power button.

have edited the first post accordingly.

[th1nm1nt]

Just tried it on my 1.90.405.1 ROM, and it kinda works.

the backlight still goes off after 3 seconds, but if i press the power button, it then stays on indefinitely.

That seems to be perfect for me, cos i don';t usually need it to be on, but it certainly is damn annoying when i do need it and have to keep pressing the power button.

have edited the first post accordingly.


I did some more testing after your post...thanks for the quick reply. It appears to work for me as well. The "INCOMING" call did shut off around 3 seconds of connectivity, then shut off. I then pressed the power button, and it stayed on indefinately. I did test it on an "OUTGOING" call, and noticed it never shut off.

Therefore, it works perfectly on the outgoing, and just requires one power button activation on the incoming.

Thanks everyone for the help. This phone is the best phone I've ever owned in my life. If it would connect 3G to the US network, I'd keep it forever and ever (until the next generation comes out).

[ferus]

Anyone figure this one out yet...

Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0 doesn’t work either.

Nothing ticks me off more than trying to read an email to someone while on the phone, and having to hit the power button 20 times every 3 seconds to relay two words at a time.

Thoughts???

I found that the Light sensor option in Advanced Config 3.0 works. I disabled Light sensor polling and during the call the screen never goes off - not one time ;-)
I am on ROM 1.90.401.1 WWE

[bzdziagwa]

My advice is to check this thread - how to improve speed and functionality on WM system level:

http://wiki.xda-developers.com/index.php?pagename=Windows_Mobile_6_Standard

Another fix:
As was mentioned in another thread there are some unused services/processes running by default on our TP:

Opera9.exe (have no idea why)
OperaPreL.exe (have no idea why)
Biotouch.exe - used for 3D Cube (not used anly longer on TP afaik - http://forum.xda-developers.com/showthread.php?t=401984)

Regards
B.

[Flippy_TK]

Does anybody knows if it is possible to open a window like Windows XP/Vista "msconfig" and "services" on WM6.1 phones? or if someone did a program to simulate that?

Because it would reeeeeeeeeeeeally be cool to have access to those kind of configuration windows to easily disable useless services / programs from "startup" )or soft reset) or program them to unload when you finish using the programs to which they related to.

[ardsar]

Does anybody knows if it is possible to open a window like Windows XP/Vista "msconfig" and "services" on WM6.1 phones? or if someone did a program to simulate that?

Because it would reeeeeeeeeeeeally be cool to have access to those kind of configuration windows to easily disable useless services / programs from "startup" )or soft reset) or program them to unload when you finish using the programs to which they related to.

Try memmaid, this allows you to stop start up tasks, look at running applications and processes, kill them, cpu usage etc. Also provides a nice tool for keeping your system junk free.

[Flippy_TK]

Thx Ardsar; I'm gonna check that

[mallman]

Try memmaid, this allows you to stop start up tasks, look at running applications and processes, kill them, cpu usage etc. Also provides a nice tool for keeping your system junk free.tried it but memaid wont launch. All the other apps seem to work but when i click on memaid in programs nothing happens. This is on the TP

[Noonski]

This Thread have to be in Sticky mode !

Very Useful, keep it update :)


Just a small repeat to an earlier anwser.

A reason this thread is not being stickied is because we recommend to Stickie this very usefull information to the WIKI.

Cheerz

[Eriol]

Can't we make this sticky? Or is it outdated??

Cheers,

Eriol

[Tiggles]

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.


I am really new to this phone stuff and I wanted to know how I could do this tweak. Please PM me or just post here!

[fhsieh]

^ Use AC3.1, look under Performance.

[patrickrivard]

OK I've tried everything posted in the first post:

HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0

But with no success at all...

This is really annoying as when you want to call your voice mail you have to hit the Power button 10 times to get through your messages...

If anyone can help it would be greatly appreciated.

[ferus]

OK I've tried everything posted in the first post:

HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0

But with no success at all...

This is really annoying as when you want to call your voice mail you have to hit the Power button 10 times to get through your messages...

If anyone can help it would be greatly appreciated.

As I wrote on 29-08-2008, 08:23 AM - try to disable the light sensor polling in Advanced Config - that did the trick for me.

[zSpinner]

Hi,

Does anyone know how to get the pro to accept files via bluetouth when the device is in sleep?
I need to press it on everytime, which is annoying.

Tnx in advance

[patrickrivard]

As I wrote on 29-08-2008, 08:23 AM - try to disable the light sensor polling in Advanced Config - that did the trick for me.

I had done that... but it Still does not work....

[rhedgehog]

also, don't bother with the third reg edit. just the first two should do it.

and are you remembering to do a power cycle once you have done the regedits?

[Antonius123]

Moderators can you make this sticky ?????

[thebiscuitboy]

As I wrote on 29-08-2008, 08:23 AM - try to disable the light sensor polling in Advanced Config - that did the trick for me.


Have also just tried this, even after a soft reset it's showing that it's disabled but still it turns off... which is a real pain :mad:

[patrickrivard]

also, don't bother with the third reg edit. just the first two should do it.

and are you remembering to do a power cycle once you have done the regedits?

Yes, I did the Power cycle after and it doesn't work....

I'm really at the end of my resources here.... Any other thoughts??

[rhedgehog]

which ROM? ! tested it on 1.66 and it didn't work, but on 1.90 it seems to. don't know what else to suggest. I don't know the registry well enough to suggest other keys to try.

[thebiscuitboy]

The ROM on my TP is: 1.90.405.1WWE, any help would be great with this one :)

[patrickrivard]

which ROM? ! tested it on 1.66 and it didn't work, but on 1.90 it seems to. don't know what else to suggest. I don't know the registry well enough to suggest other keys to try.

Rom version in my signature below

[rhedgehog]

very strange. I'm now using 1.90.405.1 and it works fine. I really don't know what to suggest....

What other tweaks have you done? Maybe there's a conflict somewhere?

[thebiscuitboy]

Only other tweaks that I've done are as follows:
Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"


Also have installed AC 3.1 but not tweaking through this.

Would it matter which regedit programme that I'm using :confused:

[ikch]

i use for my Raphael tweak utility for Diamond - DiamonTweak v.0.5 ant it works very fine. There are many very usefull tweaks for noobs like me without registry editor, especialy for touch-sensitive wheel in more aplications. Try it and enjoy!!!

[lepermessiah]

The default ones were

Flight Mode
Phone
Wireless Lan
MS Direct Push
Bluetooth
Data Connection

it only allows 6 so I changed to

Wireless Lan
Bluetooth
MS Direct Push
Data Connection
Activesync
3G



can you please explain how did you change this?

[ardsar]

http://forum.xda-developers.com/showthread.php?t=420855

use the advanced configuration tool. There is a section to change comm manager settings.

[modd1uk]

Get this stickied, excellent guide and has made my newly purchased touch pro alot nicer to use.

Glad i could get rid of the sms conversations as that was realllly annoying me. Also the " disable enlarge title bar ", alot more user friendly now.

I would like to know how to make it so the screen doesnt turn off in phone calls, and i want to fully lock EVERY button when the device is in my pocket, sick of answering random phone calls !.

Andy

[koppee1]

with regards to the "answering calls in your pocket" bit, search for "sensor lock" or "throttle lock"
..so far those seems to be the best alternative...

throttlelock:
http://forum.xda-developers.com/showthread.php?t=419525

[enrique999]

I'm having the same problem with the Touch Pro going to sleep during a call as well. I have tried disabling the light sensor using Advance Config. 3.2 by itself, that didn't work. I used the two regedits and soft rest the device, that didn't work. I've used the two regedits and disabled the light sensor and that didn't work either.

Under normal circumstances, I guess this would be okay but it's a nightmare trying to access or change voicemail or anything that requires listening to prompts and pressing a key.

Looking for anything that will help with this issue...

[modd1uk]

with regards to the "answering calls in your pocket" bit, search for "sensor lock" or "throttle lock"
..so far those seems to be the best alternative...

throttlelock:
http://forum.xda-developers.com/showthread.php?t=419525

Perfect, sensorlock is working like a trooper, if i dont want to use it i just dont rotate the device, simple as that. Before i go on the bike i rotate it and i have a hassle free ride.

Cheers for the link buddy.

[Metisse]

I too found it impossible to access voicemail because the screen goes blank, however if you press the power button on the top the screen should come on again!

[th1nm1nt]

I too found it impossible to access voicemail because the screen goes blank, however if you press the power button on the top the screen should come on again!


Read post #55 - #63 of this thread...some registry edits have some results depending on which ROM you have. I have 1.90, and these tweaks have results posted on #62.

[Metisse]

Read post #55 - #63 of this thread...some registry edits have some results depending on which ROM you have. I have 1.90, and these tweaks have results posted on #62.

My apologies I thought I'd read the thread but must have missed that page. I was intending to reply to enrique999's post two above. Put it down to old age and failing eyesight.

....I'll get me coat.;)

[th1nm1nt]

My apologies I thought I'd read the thread but must have missed that page. I was intending to reply to enrique999's post two above. Put it down to old age and failing eyesight.

....I'll get me coat.;)

No worries...we all have several threads to review discussing similiar topics. I am amazed to see how everyone with the same device has very different behavior. I understand it happens with every device, but it does seem even more visible with this device. I see it even more with two Touch Pro's under my roof. My wife has the device with more bugs, which sucks considering I have more patience.

[kc1]

Smaller menus - http://forum.xda-developers.com/showthread.php?p=2473569 - thanks to techdave and ukdj78

Could have sworn I saw a tweak somewhere to reduce the size of the font in SMS/email listings and the header of open emails (not just menus) but can't seem to find it now.

Would someone be kind enough to point me in the right direction?

[kocureq]

Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"Working correctly

This one doesn't work for me.

How should it work? Can I mute the ring by turning the device face down?

[Ashkhan]

Can I mute the ring by turning the device face down?

Yep. That's it.

[fireblade63]

Hi guys,

Installed a language pack and it changes the country every time I reboot, forcing me to enter regional settings and switching it back to Eglish US.

Is there a permanent reg edit I can do to end this?
Cheers

[kocureq]

Yep. That's it.

So it doesn't work for me.

[kocureq]

I just installed newest .NET compact framework and advanced config and enabled it there - started working.

Nice feature :)

[kheechun]

Hi,
If you have slow SIP menu or slow games, try this procedure:

http://forum.xda-developers.com/showthread.php?p=2731902#post2731902
(sorry, should've posted it here)

it speeds up my system as well :)

[bussc067]

One of the things I thought was the spupidest of all, was the reply all soft button in the mail programm. The function I (probably everyone) use(s) most is reply and not reply all!

I was very happy with the next fix
http://forum.ppcgeeks.com/showthread.php?p=424697

From the link:

If you want to fix it you need to turn outlook enhancement off.

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""

then softreset

to turn it on

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"="\\windows\\OutlookEnhancement.dll"

then softreset

It works for me! I tried everything in mail, and it seems to me that the only thing outlookenhancement does is change the reply button to reply all. And this is a HTC thing.

[Choper]

Try some of them :)
Thank you very much :D

[Brendo]

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""
This is a great fix!

[thebiscuitboy]

Have just tried this and it's not working, anybody else experiencing this :confused:

[bugsy erin]

I have also just enabled clear type in landscape mode and low and behold there is a fault it looks like i will have to hard reset again DONT ENABLE CLEAR TYPE IN LANDSCAPE MODE.

[slymmfitzyc]

Just getting in on this

[darkelf_00101]

has any one found or created an application that would unlock your phone if you deployed the keyboard? (similar to styluslock and gyrator)

[DrWatson2005]

has any one found or created an application that would unlock your phone if you deployed the keyboard? (similar to styluslock and gyrator)

Jepp, S2U2 v. 1.33 does this. Also the stylus ting. Stylus out: Unlock, Stylus inn: Lock

Great program from A_C

The Doc

[thebiscuitboy]

One of the things I thought was the spupidest of all, was the reply all soft button in the mail programm. The function I (probably everyone) use(s) most is reply and not reply all!

I was very happy with the next fix
http://forum.ppcgeeks.com/showthread.php?p=424697

From the link:

If you want to fix it you need to turn outlook enhancement off.

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""

then softreset

to turn it on

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"="\\windows\\OutlookEnhancement.dll"

then softreset

It works for me! I tried everything in mail, and it seems to me that the only thing outlookenhancement does is change the reply button to reply all. And this is a HTC thing.


Anyone else done this tweak, is it just the case of deleting Outlookenhancment.dll or do you need to replace it with anything else

[Noonski]

Anyone else done this tweak, is it just the case of deleting Outlookenhancment.dll or do you need to replace it with anything else

In Touch Pro it should be started through Bootlauncher.

But in older builds and Diamond it got started as a regular service

[HKEY_LOCAL_MACHINE\Services\OutlookEnhancement]

[motlking]

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.[FONT=Tahoma]

Anyone notice that after using these tweaks that your People tab, Photos tab and weather lagging? ie when you flick through the contacts/photos/cities?

Also launching programs takes a little longer?

Scrolling side to side on TF3D seems faster but it may have compromised other things, or is just me??

[thebiscuitboy]

In Touch Pro it should be started through Bootlauncher.

But in older builds and Diamond it got started as a regular service

[HKEY_LOCAL_MACHINE\Services\OutlookEnhancement]

Sorted at last, got it working now :cool:

[iTouch24]

keep the updates coming ... nice !

[polkadots]

More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
Works. Keep button pressed down to take more pictures

I navigate here - but I do not have the value "enabled" to change - I do have the value "enable" ... can I change that?

[fryman]

Question: I am trying to change the "Reply All" button when I am reading an email to "Delete". It is a pain to have to click "Menu" -> "Delete" every time when you open the email from TF3D. I can change it to "Reply" as shown below but I want it to show "Delete"

I opened OutlookEnhancement.dll with Resource Hacker thinking I could edit it but only could see the version info. Any one out there with more coding knowledge than me that can help me out :D

One of the things I thought was the spupidest of all, was the reply all soft button in the mail programm. The function I (probably everyone) use(s) most is reply and not reply all!

I was very happy with the next fix
http://forum.ppcgeeks.com/showthread.php?p=424697

From the link:

If you want to fix it you need to turn outlook enhancement off.

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""

then softreset

to turn it on

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"="\\windows\\OutlookEnhancement.dll"

then softreset

It works for me! I tried everything in mail, and it seems to me that the only thing outlookenhancement does is change the reply button to reply all. And this is a HTC thing.

[PyrcedPRO]

Anyone worked on changing the slider sounds yet, Eg. Lightsaber,transformer,star treksounds?
Im looking at the reg files for the pro and it does not seem to have the same files from what ive read in posts for the mogul.
Accessed \HKEY_LOCAL_MACHINE\Software\HTC\SlidingSound
only has 2 options ActiveSlidingSound, and SlidingSoundEffect
data for both is set to 0.

Any ideas???

[nickdiaz]

Anyone notice that after using these tweaks that your People tab, Photos tab and weather lagging? ie when you flick through the contacts/photos/cities?

Also launching programs takes a little longer?

Scrolling side to side on TF3D seems faster but it may have compromised other things, or is just me??

Yes, motlking. I've noticed and lamented exactly that. I think I'd rather it scroll slower but show the information faster.

[marctronixx]

what tweaks per se? i have done some reg tweaks and have only gotten positive results...

[pam0566]

How do i apply the cab? and how do i get in to change the registry on the AT&T Fuze? thanks!

[Ragin Cajun]

Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decima

I dont see these numbers for the register. How low can I go on the sensitivity?

[JFusco]

Okay, I've installed Total Commander and can't figure out how to use it to edit the registry. I tried installing PHM but it didn't actually install anything on my Fuze. I looked @ the PHM folder on my PC and found lots of CAB files. I know I need to install one for ARM but there are 4 different files with ARM in them.

Jup_ARM, Mrln_Arm, Rpr_ARM, and Stngr_ARM

Which one should I use

[KevinACrider]

@JFusco,

Type \\\ in the address bar in TC and it then you will see the registry folder.

[tedbone]

I cannot change this in the registry:
HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768

"Access is Denied"

Any work arounds?

[pkirill]

In my ATT Fuze HKLM\System\Storagemanager\Fatfs\Cachesize = 4. Am I reading this right?? I'm using TotalCommander to view the reg.

[Fordx4]

Anyone notice that after using these tweaks that your People tab, Photos tab and weather lagging? ie when you flick through the contacts/photos/cities?

Also launching programs takes a little longer?

Scrolling side to side on TF3D seems faster but it may have compromised other things, or is just me??

Ive noticed this also. Whats the best way to make sure its back to stock?

[pkirill]

ATT did it again! They crapped up the first impression of a great device with an obnoxiously loud startup animation. I'm not quite ready to start flashing my new Fuze, so as a Hermes (8525) owner, I immediately went to HKLM\Software\HTC\StartupAnimation and changed the volume, removed the 3G_Up.wav value, etc. But it was still making that horrid noise! I went looking for the 3G_Up.wav file in my Windows folder and it wasn't there. What I did find was a file Power_Up4sec.wav. Seems to be the same file. So I went looking in the registry and found this key: HKLM\Software\HTC\HTCAnimation\StartupWav. THe value here match that wav file I found. Once I deleted the value, the sound stopped.

Pretty slick of ATT to try and put the blame on HTC...

[herg62123]

sorry if this is a repeat....

i didn't know how to do a hard reset but this is what i found out from htc website just now


To perform a hard reset

1. Pull out the stylus.

2. With the device turned on, press and hold the VOLUME DOWN and ENTER(center button on front hard keys)
buttons, then press the RESET button with the stylus tip.

3. Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:

This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.

4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP
button to perform the hard reset, or press any other button to cancel the
reset.

[JFusco]

2. With the device turned on, press and hold the VOLUME DOWN and ENTER(center button on front hard keys)
buttons, then press the RESET button with the stylus tip.

3. Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:



Wow! Are you supposed to push the reset button with the stylus in your teeth?:confused: How many hands do they think we have?

"Press Ctrl, Alt, and Del simultaneously while wiggling the mouse vertically. Then, while still performing these tasks, open the optical drive while inserting a USB device. That should clear it right up."

-- Joe

Oh no, it's a Jewish vampire! Quick! Make a six-pointed star with your hands!:)

[at10ti0n]

no wakeup on slideout keyboard:

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0

credits: http://forum.xda-developers.com/showthread.php?t=443895

[gmfeld]

ATT did it again! They crapped up the first impression of a great device with an obnoxiously loud startup animation. I'm not quite ready to start flashing my new Fuze, so as a Hermes (8525) owner, I immediately went to HKLM\Software\HTC\StartupAnimation and changed the volume, removed the 3G_Up.wav value, etc. But it was still making that horrid noise! I went looking for the 3G_Up.wav file in my Windows folder and it wasn't there. What I did find was a file Power_Up4sec.wav. Seems to be the same file. So I went looking in the registry and found this key: HKLM\Software\HTC\HTCAnimation\StartupWav. THe value here match that wav file I found. Once I deleted the value, the sound stopped.

Pretty slick of ATT to try and put the blame on HTC...

I found the key in the registry, but don't know what you mean by "I deleted the value." I'm using Total Commanderm when I click on that "StartupWav" key, or show its properties, all I see is the "contents" which shows a path to "\windows\power_up4sec.wav". Do I edit that, or just delete it? If edit, how and what?

Thanks.

[Amator72]

As far as I know, it just pulls the list of programs from the programs menu.
Shove a shortcut for the program in \Windows\start menu\programs and see if it picks it up.


Man! So helpfull, finally I have it! Thanks Man!!!

[georgiejr]

I am getting this error when I try to run Advanced Config tool.

where to I get this file and how do I install it.

Again, thank you for all your help

[brandi]

You need the .Net 3.5 Compact Framework.

You can get it right from microsoft

http://www.microsoft.com/downloads/details.aspx?FamilyID=E3821449-3C6B-42F1-9FD9-0041345B3385&displaylang=en

greetz

[clausg]

no wakeup on slideout keyboard:

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0

credits: http://forum.xda-developers.com/showthread.php?t=443895

Perfect! Thanks!

[georgiejr]

Hi Brandi:

I downloaded it, copied it to my storage card on my phone and attached is the error I get.

[thisperishedmin]

Many of these tweaks were already integrated into my ROM, so its hard to say just how much they helped...(Notably the TFlo3d tweaks...)

however, adjusting the screen sensitivity has made this phone THAT much better...I used to hate its responsiveness but after setting it to 240 it feels just about perfect.

Thanks for this :)

[tadevinney]

Enable GPS photo: HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
Works

mine was already set to 1 but is not listed on the icons. is something else wrong? This is what I have on the settings tab in the camera: Flash light, White balance, Brightness, Self timer and Advanced

[pkirill]

It's not under Settings. On my Fuze, in the Camera screen I have three icons across the bottom. From left to right they are Album, Capture Mode, and Settings. The GPS is on the second screen of Capture Mode (middle icon). HTH.

[legend12]

i have a new fuze, and its rom version is 1.95

Will that interfere with programs such as TF3dConfig? I couldn't get that to run properly on my fuze; is it b/c its made for the diamond?

[allfamyankee]

dont know if this was answer but i just figure out

using advanced config

change the light sensor polling to 0 now for some reason after the soft reset it shot up to 504 regardless now it takes a long time to shut off and uderstand one thing the number represent the milliseconds in hundreds sso try to figure how much a minute or more is and place that number there hope this helps.

[gmfeld]

Ever since I did a hard reset and bloatware bypass yesterday, I notice that my data connection is constantly "connected." This was not happening before. When I check the Connectivity, it shows "Media Net (HSDPA) Connected", even when I've got nothing going on. Also, it doesn't show me the running time of the connection like it used to. I figure this is draining my battery.

There must be some tweak for this, or I made some tweak in Diamond Advanced Config, I just can't figure out what.

[Dj_Frost]

hey guys,

any idea why:

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072

and

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768

reset to defaults after soft restarts? sometimes if i apply them and soft restart right away they will stay but if lets say I turn off the phone and back on, the settings are usually gone. File system filter cache seems to be the only one that remains there...

[chiilguy]

I just wanted to say "Thank you" to rhedgehog for putting together the concise list of fixes and enhancements for the Fuze. I have only implemented the first couple so far but they make a major difference. Thanks again!

[kcchen]

Ever since I did a hard reset and bloatware bypass yesterday, I notice that my data connection is constantly "connected." This was not happening before. When I check the Connectivity, it shows "Media Net (HSDPA) Connected", even when I've got nothing going on. Also, it doesn't show me the running time of the connection like it used to. I figure this is draining my battery.

There must be some tweak for this, or I made some tweak in Diamond Advanced Config, I just can't figure out what.


Advance Config -> Menu -> Connections -> "Disconnect After:"

[herg62123]

Ever since I did a hard reset and bloatware bypass yesterday, I notice that my data connection is constantly "connected." This was not happening before. When I check the Connectivity, it shows "Media Net (HSDPA) Connected", even when I've got nothing going on. Also, it doesn't show me the running time of the connection like it used to. I figure this is draining my battery.

There must be some tweak for this, or I made some tweak in Diamond Advanced Config, I just can't figure out what.

Kill HTCIMSSvc.exe

[racoman1]

odd question, but would increasing the sensitivity of the screen harm the unit in any way?

[Aiken]

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb ...

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
These two items affect the same registry key. 8MB in AC is the same as 16384 in the registry. Changing the registry value to 32768 effectively equals setting the value in AC to 16MB.

(The registry value is the number of 512-byte sectors, so 16384*512B = 8388608B = 8MB.)

[stevopativo]

HKCU\ControlPanel\Keybd

Change InitialDelay from 250 to 50 and tell me how much faster your keyboard responds when typing! It can finally keep up with me!

[borisku]

Hy, i ve ROMeOS 1.40 ger running, an the corresponding value was 485. Changing the registry key to 50 made the touch screen react faster, if keyboard is moved, as someone would assume... Thanx...
Greetz
Boris

[Amator72]

Very useful thread indeed...

My question now - after installing Skyfire (and uinstalling it then) what happend to my Pro is the fact that when I press a link in an email Internet Explorer gets open instead of the Opera as it is normally. Does anyone know how to change it back to Opera?

[gmfeld]

Very useful thread indeed...

My question now - after installing Skyfire (and uinstalling it then) what happend to my Pro is the fact that when I press a link in an email Internet Explorer gets open instead of the Opera as it is normally. Does anyone know how to change it back to Opera?

I noticed the exact same thing today, only I've still got Skyfire installed.

[irus]

Wow! Are you supposed to push the reset button with the stylus in your teeth?:confused: How many hands do they think we have?

"Press Ctrl, Alt, and Del simultaneously while wiggling the mouse vertically. Then, while still performing these tasks, open the optical drive while inserting a USB device. That should clear it right up."

-- Joe

Oh no, it's a Jewish vampire! Quick! Make a six-pointed star with your hands!:)

this is the funniest thing i have read in awhile. :D

[Red5]

"Press Ctrl, Alt, and Del simultaneously while wiggling the mouse vertically. Then, while still performing these tasks, open the optical drive while inserting a USB device. That should clear it right up."I want you to know that this quote is now posted at the bottom of my e-mail signature. Thank you.

[HalcYoN-Fuze]

Very useful thread indeed...

My question now - after installing Skyfire (and uinstalling it then) what happend to my Pro is the fact that when I press a link in an email Internet Explorer gets open instead of the Opera as it is normally. Does anyone know how to change it back to Opera?

+1

Was just looking for a solution...

[maw]

Hi guys

I looked everywhere but still can't find it, how do you stop it from dimming the backlight while connected to a power source? This is extremely annoying when using a navigator, the screen is so damn dimm! I checked all the registry tweaks, also downloaded and installed advanced configurator 3.2 is there something I missed???

Please help me out here! THANKS!!

[hood662]

just switched over from a htc diamond over to the pro!, i am excited lol

[maw]

I found the solution by trying out a couple things in the registry and finally got it to work that the screen will stay on bright while connected to an external power source. GREAT ! I can navigate again!

[F2a]

I found the solution by trying out a couple things in the registry and finally got it to work that the screen will stay on bright while connected to an external power source. GREAT ! I can navigate again!

Perhaps you should post how you did it in case others search for an answer. Such is the purpose of a forum.

[icykid]

The Conference calling feature on the Sprint Touch Pro doesn't make any sense the press the answer call button to switchCRAP method they have is really really bad.:(
Is there a tweak to get the private and conference menu items to display in the menu when a call is in progress like the way dash does it so I can easily switch back and forth between calls and or join calls without the mystery. It would fix the biggest problem I have with this phone.

Thanks 4 the help would really appreciate it XDA:)

[stranger stel]

im quite interested in tweaking my tp so that it runs faster, as the lag in touchflo is pretty bad.. but after reading the tweaks, im at a loss for what to do.

excuse my ignorance in this matter, but how exactly do i apply these tweaks? namely the one for faster performace?

thanks alot, your help is appreciated.

[joninthout]

im quite interested in tweaking my tp so that it runs faster, as the lag in touchflo is pretty bad.. but after reading the tweaks, im at a loss for what to do.

excuse my ignorance in this matter, but how exactly do i apply these tweaks? namely the one for faster performace?

thanks alot, your help is appreciated.

As is stated in the first post, you can use a couple of progs to get you in the right direction. Find a good reg edit prog (I've been using Resco but you will have to pay for it) and Advanced Config (I've been using 3.3). Advanced Config is very useful for most of the tweaks in the first post including the faster performance tweak. There is a folder in Advanced Config specific to Performance and other parts of the phone.

Have fun :D

[telegraph0000]

Haw haw on me!! I tried most of the changes on my fuze and had to hard reset...lol
WHERE'S THE DISCLAIMER!!!!

[JoeTheFro]

Haw haw on me!! I tried most of the changes on my fuze and had to hard reset...lol
WHERE'S THE DISCLAIMER!!!!

Disclaimer??? LOL.... If HTC/Carrier didnt instruct you on making changes, then your own your own... There is always the forum to help you from making same mistakes though....

As far as tweaking goes, i use Advanced config that is bundled with NaTF v2.3 and it seems to be chock full of tweaking goodies..

[lpasq]

about to go buy att fuze and have an internet sharing question please.

when first starting to use my tilt a year+ ago, i never allowed the bloatware cabs to load and ran the htc setup and enjoyed internet sharing for laptop tethering as well as overall better performance/speed with/between apps.

question: does att once again disable internet sharing on this device as they did with the tilt?

thanks in advance!

[jglev]

about to go buy att fuze and have an internet sharing question please.

when first starting to use my tilt a year+ ago, i never allowed the bloatware cabs to load and ran the htc setup and enjoyed internet sharing for laptop tethering as well as overall better performance/speed with/between apps.

question: does att once again disable internet sharing on this device as they did with the tilt?

thanks in advance!

Yes, they did, but it's an easy fix that requires only one registry change which can be found somewhere on this board. Since it may be burried somewhere, here it is: HKLM\Comm\InternetSharing\Settings
In here will be a value named "ForceCellConnection" Delete ATT ICS so that the value is blank and reboot.

[Mrjasjam]

Hi all,

Does anyone know the tweaks to enable manual network selection. I found it frustrating last week travelling through other countries not being able to choose the network i end up on. Thanks

[californiarailroader]

Haw haw!!!!

Hee Haw? :D

http://en.wikipedia.org/wiki/Hee_Haw

[emesbe]

Hi all,

Does anyone know the tweaks to enable manual network selection. I found it frustrating last week travelling through other countries not being able to choose the network i end up on. Thanks

HKLM\Security\Phone and set ManualDisable to 0.

Then go to settings - phone - network and change the Network Selection to Manual and hit ’select’ next to that. It will take a few minutes but it will then find all of the networks in the area.

[Mrjasjam]

HKLM\Security\Phone and set ManualDisable to 0.

Then go to settings - phone - network and change the Network Selection to Manual and hit ’select’ next to that. It will take a few minutes but it will then find all of the networks in the area.

Thank you!! You're a champ.

[emesbe]

You're very welcome. But I can't take credit for it. Got this from Fuze Mobility.

[hworang00]

So I used Total Commander to try to get to \\\Registry\HKLM\Comm\InternetSharing but I don't see a settings thing at all, I just see two settings. One is to add a value, and the other is "Extension". I'm new to this stuff so please bear with me :\ Thanks for the help in advance!! :D Oh and I'm using NATF's Rom v2.3

[bribuk]

New to all this but loving the work u lot put in to it, performace tweaks dont seem to have done much to my pro but hey!

Any idea if there is a way to disable the volume button on the side of the pro? i keep turning the bloody thing to silent in my pocket :(

[persian jesus]

where can i find the registry editor? because i cant find it on the raphael wm 6.1

[emesbe]

It doesn't come with a registry editor. You have to get one. I prefer Resco, but many others swear by Total Commander. There are many besides those.

But given what may be your apparent lack of familiarity with your phone, or possibly WinMo in general, I STRONGLY suggest that you read all the info in the Wiki before you start mucking around in the registry. And get yourself a good backup program so you can recover if (when) something gets screwed up.

[tonyh750]

I have no issues performing any of these edits, or questions on HOW to do them, my only question is if my Rom/Radio version is going to cause these edits not to work.

ROM: 1.03.651.3
Radio: 1.03.15F
RAPH800

Apologies for the stupid question but I promise it's my last. You guys are pretty much my heroes for figuring all this stuff out.

-T

[irus]

So I used Total Commander to try to get to \\\Registry\HKLM\Comm\InternetSharing but I don't see a settings thing at all, I just see two settings. One is to add a value, and the other is "Extension". I'm new to this stuff so please bear with me :\ Thanks for the help in advance!! :D Oh and I'm using NATF's Rom v2.3

i could be wrong but if you only have settings for one network then there is nothing to choose from so go to settings>connections>connections to see if you have more than one.

[Cab67]

Is there a registry string that allows you to set the programs tab to 4 icons wide etc.? I seen a post for setting the program and settings page but not the program tab. I have seen this before using TF2D on my old Tilt You could set it 4 wide and I forgot how far you could go in rows. Thanks in advance if anyone knows.

[shad0w77]

Is there a registry string that allows you to set the programs tab to 4 icons wide etc.? I seen a post for setting the program and settings page but not the program tab. I have seen this before using TF2D on my old Tilt You could set it 4 wide and I forgot how far you could go in rows. Thanks in advance if anyone knows.

i have been wondering the same...

[68knight]

HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\IconCo nfig

To have 4 columns to set:
HorizontalIconSpacin g: 112
VerticalIconSpacing: 115

To have 3 columns to set:
HorizontalIconSpacin g: 148
VerticalIconSpacing: 135

by

[shad0w77]

HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\IconCo nfig

To have 4 columns to set:
HorizontalIconSpacin g: 112
VerticalIconSpacing: 115

To have 3 columns to set:
HorizontalIconSpacin g: 148
VerticalIconSpacing: 135

by

That's for the Windows Mobile Programs window, not the TouchFlo Program Tab. Cab67 clearly stated this.

[txemsdoc]

Is there a way to shorten the timeframe needed for TouchFlow to consider a text message 'read'? I want it to immediately drop the new message counter the second that message is on teh screen..
make sense?

[The Jack of Clubs]

no wakeup on slideout keyboard:

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0

credits: http://forum.xda-developers.com/showthread.php?t=443895

i reall want this but it doesnt work for me. i think it may be because i have fuze. does the work for anyone else with a fuze?

[At0mAng]

I tried searching the thread but could not find what I was looking for...

A way to remove the AT&T tab from the TouchFLO interface.

To have the Disable/HSDPA/HSUPA tab to show up under advance network or phone settings. Tried to use Advanced Config but won't do the trick.

[The Jack of Clubs]

i removed the att tab using diamond tf3d config. there are also things on it to help you improve some performance and install other themes and stuff.

http://forum.xda-developers.com/showthread.php?t=405749

[At0mAng]

i removed the att tab using diamond tf3d config. there are also things on it to help you improve some performance and install other themes and stuff.

http://forum.xda-developers.com/showthread.php?t=405749

thanks a lot!

[irus]

i reall want this but it doesnt work for me. i think it may be because i have fuze. does the work for anyone else with a fuze?

then something is wrong with your phone as i also have the fuze and it works find for me

[The Jack of Clubs]

i checked it word for word to make sure, then deleted it and readded it. nothing different. and it worked after i readded it. go figure that one out.

[irus]

i checked it word for word to make sure, then deleted it and readded it. nothing different. and it worked after i readded it. go figure that one out.

do you have a 1 or a 0 for you value

[bryanthomas007]

The Touchflo 3D configuration works great on the Sprint Touch Pro. I wanted to desperately eliminate that Sprint Music Tab and change the order of the menus. Thanks alot

[The Jack of Clubs]

do you have a 1 or a 0 for you value

0 both times.

[aestis]

Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
The Raphael (and the diamond on 1.93) now ring and vibrate for incoming SMS, so this is not really necessary, but will turn the screen on if that’s what you want (I personally don’t).

Hey! what's up... I did all of the above and for some reason my screen keeps turning on still... I have the Verizon Touch Pro and it didn't have this DWORD Value in the Key and I had to create it? Can someone help because its getting really annoying when it is in my pocket and the screen turns on.

Thanks

[adeltaY]

Thanks for the edits, i tried the screen sensitivity one, but i still can't use the stylus, it is still too unresponsive. :(

EDIT: This was my fault cuz i didn't configure the screen properly, but its fixed now! :D

[zai_hkman]

after installing the cab file and reboot, it stuck in the screen showing the window mobile and i can't do anything:( anyone can help?

[NLS]

hard reset?
tried that?
you cannot kill your device (I mean beyond hard reset) with registry entries
it is not using the NSA CPU that self destructs

[zai_hkman]

i've try hard reset but it dosen't give any response~
Or my procedure is wrong?
i firstly hold the vol. down button and enter together, then i use stylus to press the reset button, the only response is reboot the raphael:(
what's mean by NSA , sorry i'm a newbie, hope u can help me

[NLS]

NSA (http://www.nsa.gov/)
They had a special ordered CPU that could destroy itself.

The procedure is correct but are you sure you know what button is "enter"? And do you hold volume and enter until you see the message?

[zai_hkman]

thz bros
Finally, after many trials, it succeds~

[NLS]

...and the problem was?

[ben1do1]

I JUST WANT ALL MY XDA FRIENDS AND FAMILY TO KNOW ABOUT THIS. HERE IS A LINK TO THE POST. THANKS

http://forum.xda-developers.com/showthread.php?t=467374

[rjmjr69]

Heres one I found in a thread can't remember where though.

Credit goes to whoever you are but it was not me.

[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P2]
"Property"=dword:b3a

This will enable you to activate the flash during video record

[banjax]

Anyone figure this one out yet...

Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs) Doesn’t work
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0 Doesn’t work
These failed to work individually and also when applied as a pair. No use on this Raphael ROM.
HKLM\Drivers\BuiltIn\RIL\FastDormancyRule=0 doesn’t work either.

Nothing ticks me off more than trying to read an email to someone while on the phone, and having to hit the power button 20 times every 3 seconds to relay two words at a time.

Thoughts???


I had the same problem.
The first key didn't work for me.
Then I Changed both keys at the same time.
Don't forget a power cycle, nescessary for the change to activate!
And that did the trick for me.

I have changed only the "Sleep" key and now I have no black-outs of the screen when calling or receiving calls (as far as I can see). I am on official HTC ROM (1.90.00.00 shown during boot, 1.90.401.1 WWE in device information) - that ROM was in this phone from the moment it was bought.

Not sure if this matters, but I had BT headset connected in all calls ... but then I know that before changing the Sleep key despite being on headset (Motorola H500) the phone was blanking and even when woken up it was going black again. Now it does not blank unless I press the power button and then continue with screen "detached".

But life ain't perfect - can't get those 4-in-a-row-icons in the programs tab despite changing the spacing and font size - perhaps I need to get rid of the scrollbar (?) or adjust the spacing for the "missing 13 pixels".

[Radimus]

More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
Works. Keep button pressed down to take more pictures

To Enable 'Sport': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P8 -> change the value "enabled" from 0 to 1
Works. Takes 5 pictures in quick succession


didn't work, but the key "enable" (not "enabled") did work

[pcboyy]

Guyz, need your help badly :(

After tweak my Comm Manager, 3G button is enabled

By turning 3G "On", how can i 'force' my device to connect using 3G/HSDPA only?? ... instead of "Auto" which searches for 3G first, then EDGE/GPRS

this is because my place has 1 bar 3G signal.. when using "Auto" it automatically changes to GPRS.. 1 bar 3G is much faster then full bar GPRS, right?

[atomic2mod]

Another registry tweak:

Here's a reg hack to manually rotate your screen, only when desired.
In Settings/Buttons/ one used to be able to assign a button to <Rotate Screen>. This feature is hidden on the Touch Pro.

To get it back:
Using a Registry editor, go to:
HKeyLocalMachine/System/GDI/Rotation
Change the "HideOrientationUI" from 1 to 0

Now you can remap the talk key to do this on long press.

[gbueh]

Jepp, S2U2 v. 1.33 does this. Also the stylus ting. Stylus out: Unlock, Stylus inn: Lock

Great program from A_C

The Doc

ummm and how do you think that answers his question??
He asked for the keyboard to open and unlock when you using a locking program.

Read and then answer when you truly understand his question

[sjm.c]

didn't work, but the key "enable" (not "enabled") did work

check your settings and go to the capture mode within camera mode (the camera icon in the bottom center, they should be there when you select next

[dhca89]

I have the sprint version of the touch pro, and when I try to remove the startup sound it just doenst work. Ive renamed the keys in HKLM\..\HTCAnimation\ (startupwav and startupgif) and I actually ended up deleteing the keys. Ive also gone into \Windows\ and renamed HTCAnimation.wav and HTCAnimationStartup.wav. I'm using the original
ROM v.1.03.651.3
ROM date 09/12/08

Any ideas?

[PI4R0N]

Does anyone know how to make my home screen on HTC Touch PRO blank?.

At the moment I got there clock and appointees but want to have only pic of my lady :)

Cheers 4 any help.

Ta

pi4r0n

[NLS]

Close TF3D.

Seems you haven't been long with the lady yet. You'll get over it.

[PI4R0N]

And that the problem I don't want to close close TF3D. Just remove clock and appointments from home.

[smayst]

If you flick upward, it will move the big clock out of the way and leave only a small clock (just black numbers, no grey squares) and your appointments. You will be able to see the photo much better.

[groofoo]

or search for manila control.
that way you can switch between TF3D and youre regular Today screen.
and on youre today screen you can put the picture of youre girlfriend.

[shad0w77]

Does anyone know how to make my home screen on HTC Touch PRO blank?.

At the moment I got there clock and appointees but want to have only pic of my lady :)

Cheers 4 any help.

Ta

pi4r0n


... excuse me while i throw up ;)

[grafikastudios]

Heres one I found in a thread can't remember where though.

Credit goes to whoever you are but it was not me.

[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P2]
"Property"=dword:b3a

This will enable you to activate the flash during video record


It doesn't work and makes my raph crashing !!!!
WTF with this "trick":mad:

If someone could give me the original settings please?!



http://img380.imageshack.us/img380/6053/dsezampt8.png
By site internet martinique (http://www.grafikastudios.com)

[sippyboi]

i have a keyboard problem. it wont type at all. i cant use the arrows or anything..is there a rom or tweak that i can use to fix it or do i need to take it to the sprint store? an doin that means i would have to relock my phone.. i havent flashed any roms yet

[rjmjr69]

It doesn't work and makes my raph crashing !!!!
WTF with this "trick":mad:

If someone could give me the original settings please?!



http://img380.imageshack.us/img380/6053/dsezampt8.png
By site internet martinique (http://www.grafikastudios.com)

It activates the flash for VIDEO record mode as I clearly stated and your the first one to have a phone crash cause of it. I actually find it hard to believe unless you have something else going on with the camera since it only activates a button when its USED nothing gets loaded Check the rest of your TWEAKS make one TWEAK at a time never do a bunch you wont be able to pinpoint the cause. Good luck

As always when doing anything to your phone ITS AT YOUR OWN RISK


And original setting would be CHANGE BACK TO WHAT YOU ADJUSTED did you not note what the box said first. ? sounds as if you didnt.

[grafikastudios]

[QUOTE=And original setting would be CHANGE BACK TO WHAT YOU ADJUSTED did you not note what the box said first. ? sounds as if you didnt.[/QUOTE]

It's ok i've fixed it ! :)
Was'nt against u dude, but me (i did not backed up before...)
Tanks for ur support...




http://img380.imageshack.us/img380/6053/dsezampt8.png
By site internet martinique (http://www.grafikastudios.com)

[bill48105]

One of the things I thought was the spupidest of all, was the reply all soft button in the mail programm. The function I (probably everyone) use(s) most is reply and not reply all!

I was very happy with the next fix
http://forum.ppcgeeks.com/showthread.php?p=424697

From the link:

If you want to fix it you need to turn outlook enhancement off.

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"=""

then softreset

to turn it on

[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement]
"Module"="\\windows\\OutlookEnhancement.dll"

then softreset

It works for me! I tried everything in mail, and it seems to me that the only thing outlookenhancement does is change the reply button to reply all. And this is a HTC thing.

Thanks for the info bussc067! I agree & hated the Reply All button! It worked great for me so I made up a cab I posted on Dutty's Diamond thread:
http://forum.xda-developers.com/showthread.php?p=3184852#post3184852
It just clears out that Dll key (along with small txt file as noted) & puts it back (removing txt file) on uninstall so I assume it should work on the Raphael or other WM devices with that so-called 'enhancement' dll.
Hope that helps someone who doesn't feel like using regedit.
Bill

[rkmoray]

How do I change which apps load from TF3d?
For example, I use Icontact, which I want loaded when I select the contact icon

[NLS]

Check SSMaPa.

[musadikh]

on my Touch Pro ....qwerty keyboard- sms/mms button does not open my sms inbox ....can some one pl help me out to figure out the same...m sure its not a hardware issue ..something wrong with the messaging software.

[hidavi]

Actually TouchFlo3D is much smoother in this one.

Am I correct in believing that the cooked ROMs for this phone have TF2D enabled by default?

[incisivekeith]

I posted the following in another sticky thread called "Touch Flo Performance," by mistake, so I would really appreciate if a moderator can please delete that post and retain the one in here:

I got my Fuze on Monday, and since then, I have been configuring it day and night. I have kept the stock ROM as I would like to have the warranty intact. I am assuming that the configuration changes using AdvancedConfig are applicable to stock ROMs too. Please correct me if I am wrong. With that assumption, I have made a few changes using AdvancedConfig (AC). Two of the most important changes I needed were the finger pressure and screen sensitivity (threshold). I set them both "Very high," but I haven't noticed much difference in the sensitivity and the amount of pressure I need to apply with my finger. Am I missing something? Thanks.

[incisivekeith]

Any ideas about the finger pressure value?

[silverkiller]

much thanks, the speed up is great

[n.vasiliu]

Check SSMaPa.

Could you please detail this?

[NLS]

no - there is a magic button in the forum called "search"
did you try clicking it and entering the word I wrote?

[s2kjay]

here is one that did not work for me but did work on a gsm diamond. is anyone familiar with HKCU/ControlPanel/Backlight/AutoDeviceLockEnabl. this did not work on my TP with factory rom from sprint v 1.03. i am still searching for an autolock solution because that didnt work and advanced config didnt have the option under the screen section. this one is quite annoying for me and i really hoped it would have worked

[udgn]

Hi. For those with ATT FUZE Stock Rom
I got this CAB (http://www.phonenews.com/wp-content/uploads/2008/02/icsinstall.CAB) (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire (http://www.phonenews.com/where-in-the-world-is-wmwifirouter-2763/), just install the CAB and it will enable Internet Sharing, and NO registry edit needed.

As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.

Enjoy.

[materijalmen]

hello, a quick question, i saw this video http://www.youtube.com/watch?v=SpRF_OVHfvA,
is this screen lock available for the diamond?(pm me the link) poted here, because i think this is some kind of tweak..sorry for my qoestion, if it harms the thread delet it, thx

[NLS]

S2U

you can find it in this forum

[mtzlblk]

You need to open the properties for the item that will show you the values you need to change

[i_Am_ToO_SeXy]

Are these tweaks still valid with new 5.05.408.1 official HTC ROM?

[irus]

Hi. For those with ATT FUZE Stock Rom
I got this CAB (http://www.phonenews.com/wp-content/uploads/2008/02/icsinstall.CAB) (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire (http://www.phonenews.com/where-in-the-world-is-wmwifirouter-2763/), just install the CAB and it will enable Internet Sharing, and NO registry edit needed.

As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.

Enjoy.

internet sharing came with my stock fuze... did it not come with yours?

[IIInferno]

Are these tweaks still valid with new 5.05.408.1 official HTC ROM?

Yes, i also would like to know, what tweaks should we do now we have the new firmware??
Should we put the ati driver again? The SD tuneup cab ??? The juno savebattery???
If anyone knows anything please tell us!

[udgn]

internet sharing came with my stock fuze... did it not come with yours?

At least the IS that I had from stock did not had the option to tether, and I started looking for an option that didn't involve registry editing. :cool:

and I also found this alternative from eliut:

"OK, so I downloaded the new AT&T Comm Manager and that didnt work (v3.10 vs v3.8). Then I researched the Fuze Manual and found:

Select Internet Sharing in the Programs tab.
Activate that first, then connect to the PC over USB
(can also be done over bluetooth)
It automatically connects the PC to the Web!
On my Lenovo ThinkPad Tablet... I used Access Connections of the ThinkVantage Technologies utilities to create a location for this using the following settings:

Ethernet Network Adapter (Yes, select Ethernet even though its connected over USB)
Select Remote NDIS based Internet Sharing Device
Turn OFF Ethernet authentication

The Access Connections is a great utility to help you switch among several available networks.

No need to touch the Registry! "

ANY WAY it is easier with the CAB, it was hard to find it a lot of reading and loss of time, I just think that the CAB alternative should be in the Wiki as a fast alternative fro newbies or any user looking for a quick alternative.

[duchski]

I search the forum but still can't find the solution to these two annoying pests:

1) How to change the TouchFlo os its people menu shows all contacts right away and not just favorites. All of my contacts are favorites..

2) Anyway to make Opera use the same favorites list as IE?

Active Sync updates the favorits but Opera is not aware of those links and adding them one one is a b...c.


Thanks.

I uses Romeos 1.81 installed on the Fuze.

[telegraph0000]

...Two of the most important changes I needed were the finger pressure and screen sensitivity (threshold). I set them both "Very high," but I haven't noticed much difference in the sensitivity and the amount of pressure I need to apply with my finger. Am I missing something? Thanks.

load the 2nd cab
forum.xda-developers.com/showthread.php?t=469865

[azking23]

Are these tweaks still valid with new 5.05.408.1 official HTC ROM?


Is there an official ROM update from HTC? If so, where did you find it?

[NLS]

erm... from HTC maybe?

[grofudaniel]

Can anyone tell me what is by default in HKLM\Software\Microsoft\Shell ?
I deleted that dword from Shell by mistake and i need to put it again in it's place.

[faviv7]

Can anyone tell me what is by default in HKLM\Software\Microsoft\Shell ?
I deleted that dword from Shell by mistake and i need to put it again in it's place.

from my VZW 8350 TP
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell:ShowTi tleBarClock Type:Reg_DWord Data:1

hope this helps.

[grofudaniel]

I have a gsm phone ...but i remember another dword...i will try it.Anyway after i deleted that dword i didn't have any changes in phone.

[grofudaniel]

Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Tested and works a treat. TF3D is sluggish and prone to long pauses before tweak, much faster afterwards

[B]Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.[FONT=Tahoma]



If i change File system cache using advaced config to 8 mb and after that i change HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768 , the file system cache in advanced config is set up to 32768,so these 2 tweaks do same thing(maybe i am wrong but to my tp that's happen)
What of these 2 tweak is better?To mee seems that decreased speed in tf3d...but who knows

[peddlerNL]

If i change File system cache using advaced config to 8 mb and after that i change HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768 , the file system cache in advanced config is set up to 32768,so these 2 tweaks do same thing(maybe i am wrong but to my tp that's happen)
What of these 2 tweak is better?To mee seems that decreased speed in tf3d...but who knows

The same thing here.
The two settings are the same.
Setting File system cache to 8mb using advanced config results in a cachesize of 16384.

[nhshah7]

i hard reset 3 days ago and didnt bother changing the cache size to 32 mb (as i had done before my reset). I didn't notice any difference...

Are you guys actually noticing any difference from this tweak?