Dead wiz-200 need pimbackup help

[Enclave]

Hey guys,

i have a dead i-mate k-jam/wiz 200.
Until about 6 months ago i didn't know i could have soo much fun modding my phone, then a friend forwarded me here. within 20 minutes i had my spl unlocked and was modding away, best thing i ever did with a phone.
Now, my wizard is dead and i had to purchase (god forsake it a nokia 6121 classic), yes you have full permission to shoot me for a fairly un moddable phone however, it lights up and makes phone calls while i drool at the HTC diamond...
my main question is i have everything backed up on mini-sd from the wizard and would like to know is there a dedicated PC only program (like pimbackup) that i can use to retrieve the data, i have almost 200 contacts i can't retrieve plus some sms messages i DO need and hope their is a PC based software that does the same as PIM backup does for the phone?
does anyone know of a dedicated PC software that can handle the work?

[ashasaur]

Well lemme ask you this, how is your Wizard dead? Does it not boot? Not charge? Not turn on etc..? And what did you do to get it to the way that it is...it may be reversable with the proper steps.

[Myrddin Wyllt]

If you can't connect it to something (be it GPRS, WiFi, or ActiveSync), you can't retrieve data from it, that's pretty much going to be the end of that story, unless someone can point out a test bed you could plug an unpowered phone into and retrieve data with.

This is why you should always:

Back up important contact numbers to your SIM card, so you can switch phones on the fly without losing contact info
Sync your phone and duplicate your contact lists with Outlook (or you can try Thunderbird/Finchsync), so you can recover after a critical failure
try not to brick your phone :)

[Enclave]

Well lemme ask you this, how is your Wizard dead? Does it not boot? Not charge? Not turn on etc..? And what did you do to get it to the way that it is...it may be reversable with the proper steps.

To be exact for about 4 days it would power on but after around 1-2 minutes it would fade to white on the screen, i somewhat suspect water damage, but i have been careful with the device.
Never modded something i was at least unsure of. now even if i try charging it doesn't work, even with a replacement battery i tried. It shouldn't be the rom cos i haven't had problems other than the usual you get with a few weeks use.
hasn't been overclocked (although i have been extremely curious about O/C'ing a phone :P )

[Enclave]

If you can't connect it to something (be it GPRS, WiFi, or ActiveSync), you can't retrieve data from it, that's pretty much going to be the end of that story, unless someone can point out a test bed you could plug an unpowered phone into and retrieve data with.

This is why you should always:

Back up important contact numbers to your SIM card, so you can switch phones on the fly without losing contact info
Sync your phone and duplicate your contact lists with Outlook (or you can try Thunderbird/Finchsync), so you can recover after a critical failure
try not to brick your phone :)



Sadly i only have a mini usb cord to use as charger so it narrows possible fault finding options down :(
i still have the data on mini-sd but now-days nowhere has SD capability and i backed up to PIM backup regurlaly.
Always synched it (with the company i was working for, since then they've deleted the profile for reserve space :( )
would push the boundaries but nothing that *should* brick the phone itself..
for a while it would power on, get to the windows 6.1 splash screen, boot then just randomly fade to white..
only thing i can put it down to is weather damage..but even then?!
any way i can retrieve the data from a pim backup file?? (that's on the SD card itself?)

[Enclave]

Well I fixed the unit finally.

Seems that the battery went completely flat and wouldn't charge which i resolved by splicing a USB cable and attaching to the battery itself.

Now that the phone charges i can't connect to PC in Win 7 x64, XP etc. i think my soldering job on the mini USB port is to blame.

The rom i previously had loaded crashes (fade to white then restart) whenever i open the text messages menu regardless of how many messages may be stored etc.

What i'm hoping to do is flash an old official rom, trial for a few days then re flash a new rom, is it possible to flash directly from an SD card?

The information i've found so far is rather vague and from what i could find says you need to run mtty and winhex but that's where it ended.

Anyone else attempted the SD card method?


Device info:

Rom's a TNT based one WM 6.1.0.0 (don't have original RUU anymore so don't remember specifics)

G3 Wizard
IPL - 3.08
SPL - 3.08
GSM - 02.19.11