PDA

View Full Version : Help Phone Locked In Bootloader Screen


axnjaksn
16th August 2008, 03:32 AM
I have an att tilt, 8925, and it is lock in the bootloader screen, I have ran mtty info 8 command and this resulted, any suggestions???



Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=hynix_hyh0ssj0mf3p
DEVICE ID=0xBA
DEVICE MAKER ID=0xAD
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 20 (0x14) is reversed block
BLOCK 1534 (0x5FE) is bad block
BLOCK 1605 (0x645) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x9E40
Partition[3], type=0x4, start=0xAB80, total=0x10740

CE Total Length(with sector info) = 0x5615C00
CE CheckSum Length(without sector info) = 0x55C0000

Cmd>

yardie.spike
16th August 2008, 05:24 PM
Have you tried a soft reset/remove battery? What were you trying to do? Hard SPL installed?