help me，kaiser unlock problem

[xvirus]

run Olipro simlock&cid unlock tool

run first PPC is white screen,RUU no find device

Diectly run SSPL 1.53,REPLUG PPC，computer display unknown device

run SSPL1.93 also

help me

AT&T version and HTC version

[tyguy]

Search the forum!!!
One member wrote this (comes close to what's in the wiki)
I used jumpSPL1.56 KAIS und hardSPL 3.56 w/o problems to flash to ROMeOS.

BTW the neon and Niki Radio both work, don't forget to disable proxy since some HTC Connection setup CABs have it automatically enabled.
--------------------------------------------------------------------------
Well, the instructions for flashing your first ROM are pretty straightforward:

1. Flash HardSPL

a. The first thing to do is to pick a ROM you want to flash, and plug in your device to your computer.
b. The chef (person who makes the ROM) will usually say which SPL he/she recommends. If he doesn't, you can just PM him.
c. Go to this page and pick the HardSPL that the chef recommends. A HardSPL Security unlocks your phone, meaning that you can flash different ROMs than the default shipped ROMs.
d. Download the Kaiser-HardSPL-versionhere.zip from the above page and extract them to a folder on your computer, for example: HardSPL.
e. Now download the attached file in this post (JumpSPLv1) and extract it to a folder on your computer, for example: JumpSPL.
f. Once you have extracted the three files to a folder, open the folder, and copy "kaiser_JumpSPL_pof_v1.nb" and "JumpSPL.exe" (no quotes) to your device.
g. Power down your device, take out your SIM and SD card (if one), then power back on the device. If it opens an emergency call screen once restarting, just click the red End key button on your device to exit and go to the today screen.
h. Open File Explorer, then open JumpSPL.exe on your device, select the kaiser_JumpSPL_pof_v1.nb, then enter in: "0x00000000" no quotes.
i. Now, if done correctly, you should be at a Tri-color screen and it should say "USB".
j. Now disable USB connections in Activesync/Windows Mobile Device Center. To do this, click on settings under Activesync or Windows Mobile Device Center (depending on if you're running Vista or XP) and UNcheck "Allow USB connections"
k. Unplug your device, wait 5-20 seconds, then plug your device back in.
l. Remember that folder that you extracted the SPL to? Well, on your computer, open that folder, then run KaiserCustomRUU.exe.
m. Click Next, Next, then Update. Wait for it to finish, then click Finish.
n. Congratulations! If done correctly, you should have HardSPL flashed on your device. To confirm this, press and hold the camera button on your device all the way while pushing the stylus into the reset hole. You should be at a tri-clor screen (called the bootloader). The second line down should say "SPL-versionhere.Hard" (no quotes). If it does, you're ready to flash! If it doesn't, please re-read all instructions.
2. Flash the ROM

a. Flashing the ROM is very easy. First, pick the ROM you like, and download it. Usually ROMs are in a .zip or .exe file.
b. Once the download is finished, extract the .zip to a folder on your computer. If it is an .exe, just run it.
c. If it was a .zip, just run KaiserCustomRUU.exe from the folder you extracted the files to, click Next, Next, then Update, then Finish. It it was an .exe that you downloaded, it should do this automatically. However, if it doesn't, it should just extract the files for you into a folder. Just follow the same procedure for a .zip file if it does do this.
d. Congratulations, you should have just flashed the ROM! If not, please re-read the instructions above.
3. Flash the Radio

a. This is where newcomers tend to become confused. Basically, you just need a radio that matches the ROM you have. One reason to tell if you do not have a correct radio is if you have camera issues, and sound issues while talking on the phone. Just remember: only flash Kaiser radios! If you try flashing a Polaris radio on your device, chances are you'll brick it.
b. You can flash the radio before or after you flash the ROM. Basically, the ROM and the Radio need to match. Chefs sometimes include Radios in their ROM, in which case you would not need to flash a new one. Just look in the thread of the ROM you want to flash to see if the chef included it. If there is an included radio, you can skip the rest of the steps. If the chef does not include a radio, he/she will usually recommend one.
c. You can download radios from here. Just download the one your chef recommends. If your chef does NOT recommend a radio, just PM him/her and ask which radio he/she recommends. Many people prefer 1.58.25.17 for its awesome battery life. 1.58.25.17 also works on many newer ROMs.
d. So, just for the sake of the rest of these steps, we are going to assume that you have flashed a newer ROM and are now going to flash Radio 1.58.25.17.
e. Now, just download 1.58.25.17 from the link I posted above (should be a .zip), extract the files to a folder on your computer, run KaiserCustomRUU.exe, click Next, Next, Update, then Finish.
f. Congratulations, you have flashed your radio and you are completely done. If, for example, you are experiencing issues with the camera and phone, just flash a different radio using the same method as posted above.
That's it.

And remember, please read the Wiki, Stickies, and G.W.E.N.I. for the answers to most of your questions. Or, you could use the wonderful Search functions of this forum.

[stoutseun]

...
f. Once you have extracted the three files to a folder, open the folder, and copy "kaiser_JumpSPL_pof_v1.nb" and "JumpSPL.exe" (no quotes) to your device.
...


This might get me one step closer to finding out why I can't flash a HardSPL. Tried every possible way for 2 days (questions thread here somewhere) but no luck.

I'll try some searching, but can you perhaps give the link where specific instructions above were posted? I'd like to try the seperate .exe and .nb file approach rather then the not-working-for-me JumpSPL1.xx versions. Thanks

EDIT : Don't worry, I've found the link to above...

EDIT2 : Tried above and got the white screen. Redownloaded your JumpSPL1.56 and HardSPL again and tried everything again with all my fingers crossed. IT WORKED!!!! Dunno why or how, but it did... ;-)

[xvirus]

Search the forum!!!
One member wrote this (comes close to what's in the wiki)
I used jumpSPL1.56 KAIS und hardSPL 3.56 w/o problems to flash to ROMeOS.

BTW the neon and Niki Radio both work, don't forget to disable proxy since some HTC Connection setup CABs have it automatically enabled.
--------------------------------------------------------------------------
Well, the instructions for flashing your first ROM are pretty straightforward:

1. Flash HardSPL

a. The first thing to do is to pick a ROM you want to flash, and plug in your device to your computer.
b. The chef (person who makes the ROM) will usually say which SPL he/she recommends. If he doesn't, you can just PM him.
c. Go to this page and pick the HardSPL that the chef recommends. A HardSPL Security unlocks your phone, meaning that you can flash different ROMs than the default shipped ROMs.
d. Download the Kaiser-HardSPL-versionhere.zip from the above page and extract them to a folder on your computer, for example: HardSPL.
e. Now download the attached file in this post (JumpSPLv1) and extract it to a folder on your computer, for example: JumpSPL.
f. Once you have extracted the three files to a folder, open the folder, and copy "kaiser_JumpSPL_pof_v1.nb" and "JumpSPL.exe" (no quotes) to your device.
g. Power down your device, take out your SIM and SD card (if one), then power back on the device. If it opens an emergency call screen once restarting, just click the red End key button on your device to exit and go to the today screen.
h. Open File Explorer, then open JumpSPL.exe on your device, select the kaiser_JumpSPL_pof_v1.nb, then enter in: "0x00000000" no quotes.
i. Now, if done correctly, you should be at a Tri-color screen and it should say "USB".
j. Now disable USB connections in Activesync/Windows Mobile Device Center. To do this, click on settings under Activesync or Windows Mobile Device Center (depending on if you're running Vista or XP) and UNcheck "Allow USB connections"
k. Unplug your device, wait 5-20 seconds, then plug your device back in.
l. Remember that folder that you extracted the SPL to? Well, on your computer, open that folder, then run KaiserCustomRUU.exe.
m. Click Next, Next, then Update. Wait for it to finish, then click Finish.
n. Congratulations! If done correctly, you should have HardSPL flashed on your device. To confirm this, press and hold the camera button on your device all the way while pushing the stylus into the reset hole. You should be at a tri-clor screen (called the bootloader). The second line down should say "SPL-versionhere.Hard" (no quotes). If it does, you're ready to flash! If it doesn't, please re-read all instructions.
2. Flash the ROM

a. Flashing the ROM is very easy. First, pick the ROM you like, and download it. Usually ROMs are in a .zip or .exe file.
b. Once the download is finished, extract the .zip to a folder on your computer. If it is an .exe, just run it.
c. If it was a .zip, just run KaiserCustomRUU.exe from the folder you extracted the files to, click Next, Next, then Update, then Finish. It it was an .exe that you downloaded, it should do this automatically. However, if it doesn't, it should just extract the files for you into a folder. Just follow the same procedure for a .zip file if it does do this.
d. Congratulations, you should have just flashed the ROM! If not, please re-read the instructions above.
3. Flash the Radio

a. This is where newcomers tend to become confused. Basically, you just need a radio that matches the ROM you have. One reason to tell if you do not have a correct radio is if you have camera issues, and sound issues while talking on the phone. Just remember: only flash Kaiser radios! If you try flashing a Polaris radio on your device, chances are you'll brick it.
b. You can flash the radio before or after you flash the ROM. Basically, the ROM and the Radio need to match. Chefs sometimes include Radios in their ROM, in which case you would not need to flash a new one. Just look in the thread of the ROM you want to flash to see if the chef included it. If there is an included radio, you can skip the rest of the steps. If the chef does not include a radio, he/she will usually recommend one.
c. You can download radios from here. Just download the one your chef recommends. If your chef does NOT recommend a radio, just PM him/her and ask which radio he/she recommends. Many people prefer 1.58.25.17 for its awesome battery life. 1.58.25.17 also works on many newer ROMs.
d. So, just for the sake of the rest of these steps, we are going to assume that you have flashed a newer ROM and are now going to flash Radio 1.58.25.17.
e. Now, just download 1.58.25.17 from the link I posted above (should be a .zip), extract the files to a folder on your computer, run KaiserCustomRUU.exe, click Next, Next, Update, then Finish.
f. Congratulations, you have flashed your radio and you are completely done. If, for example, you are experiencing issues with the camera and phone, just flash a different radio using the same method as posted above.
That's it.

And remember, please read the Wiki, Stickies, and G.W.E.N.I. for the answers to most of your questions. Or, you could use the wonderful Search functions of this forum.

Let me try again,thanks