can i flash with bluetooth?

[ratluci]

I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS

[l3v5y]

I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.

[ratluci]

Is there any other way to flash phone? And please help me about buttons??

[kareem9nba]

You can flash through the memory card if you can't do it via sync cable.

[ratluci]

Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs

[l3v5y]

As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel

[ratluci]

i have read all about flashing but have not found how to flash with memory card... please help... thanks

[ratluci]

I dont want to be annoying but HELP!!!! please

[l3v5y]

If you can't find anything on SD Card flashing, it may not be possible with your device.

[sschrupp]

I was hoping this was possible as well.

The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.

After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.

Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.

I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!

So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.

So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? :( At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.