Tri-Color Bricked Tilt

[Kurumi]

My poor tilt is stuck at the tri-color screen and it doesn't have HardSPL installed. I can't get one installed to unbrick it since all the guides tell me that I need one before I can use any tools to do so. What is displayed on the screen is the following:

KAIS1*0
SPL-3.02.0000
CPLD-8

[KMFM$]

Do you have a microSD card? If so, you can flash your kaiser back to factory with an approved ROM. Search the forum for the SHIPPED that came standard on your Kaiser (or the ROM that came with your phone from your carrier). Use 7zip or WinRAR to extract the RUU_Signed.nbh from the download. Copy to the root of your FAT32 FORMATTED microSD and rename the file to KAISIMG.nbh. Reset your phone and hold the camera button. When the phone restarts it should quickly show you the tri-color screen then go to a screen that says loading. From there follow the on-screen instructions. This will give you back your default ROM.
IMPORTANT!!! ONLY DOWNLOAD AND USE THE ROM THAT SHIPPED WITH YOUR DEVICE!. If you look at the wiki, you will find a list of the shipped ROMs (Including the AT&T ROMs, hint).
Consider this a freebie. Any other time you would have probably been flammed for not searching. For any other questions I suggest you search for "Stuck at tri-color screen" and "Flashing from microSD".

[Alibaba0101]

I will gladly give you $50 for your bricked tilt. Otherwise...load the stock rom back on the phone.