getz2thapaper
18th August 2008, 02:51 AM
i have been a member , but mainly use the site to get details & at one point tried to OVERCLOCK my phone (didnt go to well)
that said i HAD BROKEN MY LCD screen last week on my
Tmobile Wing / HTC HERALD...
i searched many sites & finally came by a
ebay seller who sold me an LCD screen (w/ digitizer) for around $50 -->
I also was given a t6 screwdriver free. :D
i got the SERVICE MANUAL THATS ALL OVER THE internet for the wing (apparently its the ONLY SERVICE manual on how to dissemble the wing)
-- I FOLLOWED THE DIRECTIONS & WAS ABLE TO REPLACE THE LCD ITSELF.
I put together the phone in reverse to the manual & nearly exactly.
& then i got the WHITE SCREEN when i turned it on! --->
after messing around i figured out it was the MOTHERBOARD to LCD connector part ...
but i tried sticking it together with tape & it does not work
(I LOST THE YELLOW TAPE THAT WAS ORIGINALLY ON IT)
IT ONLY WORKS IF I USE MY FINGER & APPLY FIRM PRESSURE & still the color w/ dif. pressure [applied] FUGGs up.
(which would be impossible to do if i wanted to use my phone) --
so i don't want my $50 dollars spent gone to waste ....
'
DOES ANY 1 HAVE ANY SUGGESTIONS ON HOW I CAN MAKE IT STICK together
or FIX IT PROPERLY!
again i checked & it is the connector cable that travels from the LCD to the main/motherboard that causes the problem.
this is the last place i can turn to before i have to go to an OVERCHARGING cellphone store to fix it (even after i supply everything to fix it :smh: :mad:
that said i HAD BROKEN MY LCD screen last week on my
Tmobile Wing / HTC HERALD...
i searched many sites & finally came by a
ebay seller who sold me an LCD screen (w/ digitizer) for around $50 -->
I also was given a t6 screwdriver free. :D
i got the SERVICE MANUAL THATS ALL OVER THE internet for the wing (apparently its the ONLY SERVICE manual on how to dissemble the wing)
-- I FOLLOWED THE DIRECTIONS & WAS ABLE TO REPLACE THE LCD ITSELF.
I put together the phone in reverse to the manual & nearly exactly.
& then i got the WHITE SCREEN when i turned it on! --->
after messing around i figured out it was the MOTHERBOARD to LCD connector part ...
but i tried sticking it together with tape & it does not work
(I LOST THE YELLOW TAPE THAT WAS ORIGINALLY ON IT)
IT ONLY WORKS IF I USE MY FINGER & APPLY FIRM PRESSURE & still the color w/ dif. pressure [applied] FUGGs up.
(which would be impossible to do if i wanted to use my phone) --
so i don't want my $50 dollars spent gone to waste ....
'
DOES ANY 1 HAVE ANY SUGGESTIONS ON HOW I CAN MAKE IT STICK together
or FIX IT PROPERLY!
again i checked & it is the connector cable that travels from the LCD to the main/motherboard that causes the problem.
this is the last place i can turn to before i have to go to an OVERCHARGING cellphone store to fix it (even after i supply everything to fix it :smh: :mad: