Bricked HTC TyTn II - RGB-screen!!

[GertBeckers]

Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe

The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5

When installing the ROM, it stopped at 19%, giving a communication error. :confused:
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.


I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.

When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...

Does anyone know how to revive my beloved device?
Help will be appreciated!

Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)

[GertBeckers]

... to mention that I had a WM5-device and I would like to have a WM6-device. That was the main reason for the flash-attempt.

Thanx in advance!
:)

Gert Beckers

[cracrew]

It happen to me too I did some search and found that you need to download mtty I thing 1.6 select usb and there was two command you have to exeute and it should work for some reason you can't flash the rom to it from sd on 193. I will try to get you the command later if you haven't found them in here . good luke. let me know how you make out.

regards

[vladb]

Hi!
The same thing happend to me two days ago.
The only solution is to install the original "Shiped ROM". Try with this one, because mine TyTN II rejected every other with error "Invalid Vendor":
http://www.asia.htc.com/download/RUU_Kaiser_HK_WWE_1.82.721.1_radio_sign_22.51.88.1 3_1.27.15.32R2_Ship.exe
Good Luck!

[GertBeckers]

Thank you for your quick reply!

Indeed, I forgot to mention that I already tried th MTTY. When I start the application and try to open the USB, it says 'USB will not open'.
I tried it also on another PC, just to be on the safe side, same result
No luck there.

I suspect the solution is to be found in the numbers!? :confused:

Kind regards,

Gert Beckers

[GertBeckers]

Mmm,
Vladb,
Thank you for your quick response!

But, when I install the original shipped ROM, shouldn't it be the same version? Your link is clearly another version!
Could you send me a link with some more versions? Maybe European ones (english).

Sir Thanks-a-lot,
Gert Beckers

[DaveShaw]

Hi,
Try searching this forum for "tri color" no quotes, there should be enough responses there to get you started.

Ta
Dave

[vladb]

Actualy this is WWE English version for phones from Hong Kong. I bought mine in the U.S, but since it was ment for Asia, this is the link you need. Also, this is updated ROM... your original was: 1.56.XXXX, and this is 1.82.XXXX
I saw from your first post that you have the same version like I do.

Try it,
Best regards!
BTW, mine is up and running, and more stable! :-)

[GertBeckers]

vladb,

Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...

Does any one have any idea?

Sir Thanks-a-lot,
Gert Beckers

[GertBeckers]

Picture of the vendor ID

[DaveShaw]

vladb,

Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...

Does any one have any idea?

Sir Thanks-a-lot,
Gert Beckers

See my other post above, but also, your original ROM is can be dowloaded here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs

Download and flash that. Once you back in Windows Mobile, see the stop sticky on this forum, in post #2 there are clear steps on flashing Hard SPL.

Thanks
Dave

[GertBeckers]

Dave,

Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!

Gert Beckers

[vladb]

OK... the next thing I would try is to download shiped ROM's from: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
and try to install one by one.
That is if you don't know your phone region.
If you do know... :-)

Good Luck!

[DaveShaw]

Dave,

Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!

Gert Beckers

I don't know which one will help you most, but if you ensure the thread in the "Kaiser ROM Development" forum, you'll just have to skim read them to see which ones have a solution at the bottom and see if the symptoms match yours.

From skim reading the posts myself, flashing the ROM I gave you should let you back into Windows Mobile. Once there you "MUST" flash Hard SPL, before trying anything else. (Instructions & FAQ are in the Hard SPL sticky post #2).

Thanks
Dave

[GertBeckers]

Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day! :-p
Up and running again!

[DaveShaw]

Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day! :-p
Up and running again!

:o:o:o:o

Glad I could help. And now I know how to help people with "Stuck at Tri Colour Screen" problems. You learn something new every day.

Ta
Dave

[NotATreoFan]

Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe

The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5

When installing the ROM, it stopped at 19%, giving a communication error. :confused:
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.


I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.

When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...

Does anyone know how to revive my beloved device?
Help will be appreciated!

Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)

Did I miss the part where you flashed HardSPL? Because it's not listed in your steps above. Flashing a ROM with JumpSPL is just begging for this to happen.

[DaveShaw]

I've added my steps to fix this to the Wiki at http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader.
This has been linked to on the on the ROM Upgrading section of the HTC_Kaiser page and the ROM Flashing FAQ page.

[kjb86]

I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.

This is odd..

just says:
KAIS130
SPL-3.29.Hard
CPLD-8


and in the white screen "serial"

Anyone know why this has happened?

[AllTheWay]

I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.

This is odd..

just says:
KAIS130
SPL-3.29.Hard
CPLD-8


and in the white screen "serial"

Anyone know why this has happened?

Try flashing your original shipped ROM.

[DaveShaw]

Shameless self plug: http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader :D

Ta
Dave

[mbarvian]

Shameless self plug: http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader :D

Ta
Dave

i've never seen that one, did you just add it?

good job!

[DaveShaw]

i've never seen that one, did you just add it?

good job!

Started last night with the Basic, flash a carrier ROM, and expanded it today whilst working on a new thread. I've PM'd GSLEON to proof read it for me.:cool:

Ta
Dave

[kjb86]

As suggested by Dave, I will stick to just this thread only.

My phone is still messed up.

I am still stuck on the bootloader screen. I have tried:
a) flashing to a carrier original rom
b) mtty - all commands
c) Kaiser stuck_at_bootloader wikki.

Nothing seems to work, all I do is get command errors etc.

It came back at one point the other day, but now it's back to square one.

I'm lost.. does anyone have any options?

[tilt831]

As suggested by Dave, I will stick to just this thread only.

My phone is still messed up.

I am still stuck on the bootloader screen. I have tried:
a) flashing to a carrier original rom
b) mtty - all commands
c) Kaiser stuck_at_bootloader wikki.

Nothing seems to work, all I do is get command errors etc.

It came back at one point the other day, but now it's back to square one.

I'm lost.. does anyone have any options?

My Tilt has the same problem as yours. Woke up one morning to find it stuck in SPL. Tried all suggested fixes as you have. Now mine is stuck in "serial" and cannot get it to switch to "USB" when I connect it to my PC. Is mine pretty much bricked? Good luck.