dcd's titan ROMs & kitchen 3.2.6

[dcd1182]

I take no responsibility for anything you do to your device.
Please see the wiki page (http://wiki.xda-developers.com/index.php?pagename=dcdtitanroms) first.

YOUR INTERNET CONNECTION WILL NOT WORK UNTIL YOU INSTALL THE CARRIER CAB!!!!!
Kitchen-Built and Pre-Built ROM *BOTH* require a carrier cab!!!

Carrier cabs are here (http://dcd1182.n715dp.com/index.php?dir=carriers%2F)

ROM Features:
UC Compatible (http://forum.xda-developers.com/showthread.php?t=366337)
Improved Power Management
Touch Themed Dialer
Touch Themed Commmanager
Touch Themed Calculator
Relaxed security Policy
Volume Increase
D3D software acceleration

3.2.6: 8-22-08 WM 6.1 CE OS 5.2.20275 Build 20275.1.3.3

Kitchen:
Download (http://dcd1182.n715dp.com/titan/kitchens/dcd_titan_kitchen_3.2.6.rar)
Also requires: .net framework 2.0 (http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en)

ROM:
Download (http://dcd1182.n715dp.com/titan/roms/dcd_titan_3.2.6.exe)

http://img264.imageshack.us/img264/6161/wide1vp8.jpg
http://img152.imageshack.us/img152/407/wide2gw8.jpg

Hard-SPL 2.XX (http://forum.ppcgeeks.com/showthread.php?t=30561) is REQUIRED.
A device with SPL 1.20-olipro will constantly reboot with this rom!
I would also recommend that Hard-SPL 2.40 users update to Hard-SPL 2.47.

NO RADIO IS INCLUDED. RADIO 1.XX, 2.XX, and 3.27 ARE NOT COMPATIBLE!!
Radio ROM 3.35 or later is required. Radio ROM 3.42.40 or later is reccomended.

Thank you:
bepe, no2chem, ImCoKeMan, tadzio, dogguy, N715DP,
foetus, lotekjunky, sleuth255, gc14, halfdriven, superevilllama,
electronicrice

Thanks to N715DP for the great webhosting!


changelog:

3.2.6
update to CE OS 5.2.20275 AKU 1.3.3
update OEMXIPKernel
update touch.dll
update *_Lang_0409 to 20273
include samsung omnia D3D driver
include threaded sms cpl from diamond
removed SYS\GPSID
fixed callwaiting beep ???

[rmancl]

thanks you are always on top of things, here i go flashing again. :)

[Dalrain]

Thank you, dcd! You're making my phone easy and fun to use, and it's much appreciated.

[joojoobee666]

sunuvawhore....just flashed to 3.2.5....looks like I'll be doin some cookin in the kitchen tomorrow....*sigh*

Is .net Framework 3.5 confirmed working from the kitchen?

[worldwidepmp]

Thanks again!

[get-Apache]

hey did anyone else have a problem with this download? My NOD32 indicated Antivirus 2008 adware was in the payload.

[joojoobee666]

hey did anyone else have a problem with this download? My NOD32 indicated Antivirus 2008 adware was in the payload.

Symantec Antivirus Corporate 10.2 says all clean :)

[dcd1182]

hey did anyone else have a problem with this download? My NOD32 indicated Antivirus 2008 adware was in the payload.

man i got infected with that last week so its actually totally possible, but SAV CE 10 says I am clean.
did your AV give you any more detail? if you mean it claims os.nb.payload is infected, i dont see how thats possible.

[ryanwood]

Avast 4.8 reports that the kitchen file is totally clean...

[worldwidepmp]

Mine scanned clean also

[mafe72]

My antivirus Avast 4.8 reports no problem. Thanks!

[joojoobee666]

Sweet, .net framework 3.5 working just fine from the kitchen. Thanks DCD!

[get-Apache]

sorry everyone, the file is clean, My laptop is infiltrated. On my desktop, Kaspersky shows the dcd 3.2.6 is clean.

[t0mmyr]

thank you dcd! perfect timing, my replacement mogul just arrived yesterday and its time to start cooking

btw, kitchen came out clean for me

http://i34.tinypic.com/1410h3k.gif

[kdj67f]

It is always a pleasure flashing your ROMs DCD!

Thank you

[Scrufdog]

welp, guess its time to upgrade the radio and rom, and anything else that looks pretty....

[frazell]

Thanks for the work!

About to load this up and test it now over my 3.2.5 release that I just recently moved to from stock Sprint :D.

Only question is do you post changelogs to the Carrier Cabs? I noticed you updated the Sprint Carrier cab yesterday and was wondering what changed in it?

[Summit1]

3.2.6 is working like a charm! Thanks dcd!

[joojoobee666]

I noticed that the bug with the start bar appearing too soon on the 3.2.5 kitchen (as well as the 20226 and 20270 kitchens) is gone. Very nice. ME LIKE! I think I am now officially a DCD kitchen fan. Also noticed that this 3.2.6 seems to have a little more free RAM on boot than 3.2.5, and with the Titan, every f*ckin KB counts. Thanks again :D

[b0ris84]

my nod32 is still going nuts can't download the thing. Says it has win32/adware.antivirus2008 application. I've had a lot of other dcd roms and never had that so that is a little peculiar.

[Hypeo]

my nod32 is still going nuts can't download the thing. Says it has win32/adware.antivirus2008 application. I've had a lot of other dcd roms and never had that so that is a little peculiar.

The Kitchen is clean, Turn off your antivirus and download it run the application then turn the antivirus on again. make sure you don't have the internet connected just to be safe.

[Hypeo]

quick question for someone that might know this. I got UC running good, but is there a way to have some apps install onto the SD card? all my apps are installing on main memory and was wondering that!! Any suggestions??

here is a log of my UCConfig

LOCK:Enabled
CAB: \Storage Card\Cab\AudioPara.cab
CAB: \Storage Card\Cab\dcd_Sprint_Carrier_20080823.cab
CAB: \Storage Card\Cab\MusicID.cab
CAB: \Storage Card\Cab\smmssetupfull.cab
CAB: \Storage Card\Cab\SpbMobileShell.cab
CAB: \Storage Card\Cab\Black_Diamond_Dialer.cab
CAB: \Storage Card\Cab\HTC_Large_Start_Menu.cab
CAB: \Storage Card\Cab\GPSToday0991.cab
CAB: \Storage Card\Cab\GC_4_Columns.cab
CAB: \Storage Card\Cab\LiveSearchWM6.cab
CAB: \Storage Card\Cab\GoogleMaps_compressed.cab
LOCK:Disabled
RST: Reset

[b0ris84]

oh ya the kitchen is cool but the rom is the one thats giving me the virus alert. I'm just going to download it and extract the .nbh file with winrar and delete the rest of the thing

[Hypeo]

oh ya the kitchen is cool but the rom is the one thats giving me the virus alert. I'm just going to download it and extract the .nbh file with winrar and delete the rest of the thing

that might work!

[JerrytheGreat]

Except I keep forgetting to delete the radio on my card--flashing the radio by mistake for the 3rd time....

[craig540]

DCD I have not been able to receive any pictures since 3.2.3
And I am using Arcsoft MMS 5.0.31.25. I can send but not receive. Have you done any updates for picture mail in 3.2.6

[ilkhan]

Except I keep forgetting to delete the radio on my card--flashing the radio by mistake for the 3rd time....
Lol.
Flashing 3.2.6 ROM (no kitchen) now.
Ill let you know my final RAM count when done with UC...for the difference. I want to know how much I use from my UC apps.

[joojoobee666]

DCD I have not been able to receive any pictures since 3.2.3
And I am using Arcsoft MMS 5.0.31.25. I can send but not receive. Have you done any updates for picture mail in 3.2.6

Who's ur carrier? VZW?

[Biodome]

DCD once again proving he's the best. Thanks.

[asenduk]

hey DCD,
thanks for updating your cricKet carrier cab as promised... epst now works :D
excellent super fast ROM!!!!

[b0ris84]

is it just me or does the link for the rom no longer work cuz its not working for me

[joojoobee666]

BTW, to anyone who is interested...i took the Verizon OEM from the PPCKitchen "Carriers_Titan.rar" and threw it in the OEM folder for the DCD kitchen....and it works great. No need to install the DCD carrier cab after flashing.

Used the OEM on both 3.2.5 and now 3.2.6, works great. Food for thought.

as far as this?
is it just me or does the link for the rom no longer work cuz its not working for me

Links are working fine for me.

[freeza]

does anyone know if it's possible to get the extended rom visible and writable on this rom?

i have stuff there from n2c's rom that i need to be able to use. thanks.

[dalepl]

wELL, i HAVE dcd's 3.2.5 working like I like and now I find he has released 3.2.6. Oh well, I guess I will have to load this one now :). Anyway, I was also wondering if anyone on Alltel has been able to get version 5 of Arcsoft MMs to work? I have tried several versions and none seem to send on Alltel. Version 3 works fine. I would like the ability to use smilies in my messages. Any way, great work DCD. I will post any issues I have, but I do not htink I will have any since 3.2.5 worked fine for me.

P. Dale

HTC Titan
Alltel
ROM dcd 3.2.5 (for now)
Radio 3.42.50

[dcd1182]

BTW, to anyone who is interested...i took the Verizon OEM from the PPCKitchen "Carriers_Titan.rar" and threw it in the OEM folder for the DCD kitchen....and it works great. No need to install the DCD carrier cab after flashing.

Used the OEM on both 3.2.5 and now 3.2.6, works great. Food for thought.

as far as this?


Links are working fine for me.

well... if this works then great, but consider your setup unsupported. i cant troubleshoot an unknown environment. the carrier cabs are for very good reasons. becauseof this i have to reccomend against anyone doing this.

[dcd1182]

oh ya the kitchen is cool but the rom is the one thats giving me the virus alert. I'm just going to download it and extract the .nbh file with winrar and delete the rest of the thing

i am pulling the standalone ROM for now until i have time to attack my workstation

funny thing, tonight i ran into a guy with a titan. he said he heard there is a guy here in town who makes a custom firmware for it :)

[joojoobee666]

well... if this works then great, but consider your setup unsupported. i cant troubleshoot an unknown environment. the carrier cabs are for very good reasons. becauseof this i have to reccomend against anyone doing this.

Fortunately, I have had no problems. I know ur kitchen was not designed around these particular OEMs, but it has worked just fine 4 me. 2x over to be exact.


I'm just throwing it out there cuz it worked great for me(x2) and was my second dcd kitchen ROM upgrade in the last week. The VZW oem made my cooking experience that much more enjoyable. I just thought I was helpin other peeps with VZW.

Again, thanks for a kick ass ROM, I am currently a DCD fan now...20270 is no where NEAR as good as this 3.2.6 :P

-edit-
I feel I should also mention that I am in no way trying to circumvent your ROMS/work. I was just thinkin I could save some peeps a few steps. Worst case scenario??? u gotta recook/flash.

[t0mmyr]

grrrrrr
My Sprint is Temporarily Unavailable
damnit stupid sprint, i need to swap esns for my new phone to work and Sprint just has to go down right this minute after i relocked my defective phone and boxed it all up, grrrrrr, well i guess ill keep adding some flavors to my rom and keep on cooking my first batch of 3.2.6....


...i was wondering, about how long does it take for everyone to get their rom cooked and running when they find out dcd releases a new version? looks like im going on 3 hours so far and havent flashed it on yet lol

[t0mmyr]

hey dcd is SprintTV included somewhere in the kitchen? or whats the best way to get the latest one on there for a mogul? i think last time i tried running in 3.2.5 i got an error 7000 when i tried to view nbc

[ilkhan]

...i was wondering, about how long does it take for everyone to get their rom cooked and running when they find out dcd releases a new version? looks like im going on 3 hours so far and havent flashed it on yet lol
Id flashed within an hour of hearing that there was a new version. BUT, my hard reset is literally the time to flash, the 5-10 minutes of UC time, and like 6 config changes, and Im set. My UC even syncs to exchange automatically for mail, contacts, tasks and calendar. So Im down for maybe 20 minutes and lose nothing. (I dont bother registering SPB stuff, it gets reset whenever I feel like it)

Last post on this page, so nobody will ever see it. Sad panda. :(

[JerrytheGreat]

Id flashed within an hour of hearing that there was a new version. BUT, my hard reset is literally the time to flash, the 5-10 minutes of UC time, and like 6 config changes, and Im set. My UC even syncs to exchange automatically for mail, contacts, tasks and calendar. So Im down for maybe 20 minutes and lose nothing. (I dont bother registering SPB stuff, it gets reset whenever I feel like it)

Last post on this page, so nobody will ever see it. Sad panda. :(

I read every post for the first few days when a new rom comes out--including your "bottom of the page" one.

Where do you suggest I look to learn more about using UC to automate stuff? I take about 35 mins to set things back up, and would love to see that goto 15.

[shubhanyu]

Id flashed within an hour of hearing that there was a new version. BUT, my hard reset is literally the time to flash, the 5-10 minutes of UC time, and like 6 config changes, and Im set. My UC even syncs to exchange automatically for mail, contacts, tasks and calendar. So Im down for maybe 20 minutes and lose nothing. (I dont bother registering SPB stuff, it gets reset whenever I feel like it)

Last post on this page, so nobody will ever see it. Sad panda. :(

I saw !! :D Great work DCD ... faster and more memory conscious ROM ... too good! For the first time ever, I donated! ... :D Scintillating work, DCD ...

[JerrytheGreat]

dcd--suggestion for your next update--
Could you please include the dialer popup fix?
Registry fix:
http://forum.xda-developers.com/showthread.php?t=413151
Thanks,
jtg

[craig540]

DCD I have not been able to receive any pictures since 3.2.3
And I am using Arcsoft MMS 5.0.31.25. I can send but not receive. Have you done any updates for picture mail in 3.2.6




Who's ur carrier? VZW?

Yes Verizon

[karana]

Last post on this page, so nobody will ever see it. Sad panda. :(

There are followers like me who read every single post (at least in the first few days anyways)....

[karana]

Hey dcd, is there a change log for the carrier cabs as well some place? Also I noticed you already have folders for Victor and Herman. How long do you think it would take to dcd'ize them?

[nitro66215]

I read every post for the first few days when a new rom comes out--including your "bottom of the page" one.

Where do you suggest I look to learn more about using UC to automate stuff? I take about 35 mins to set things back up, and would love to see that goto 15.

User Customization (http://forum.xda-developers.com/showthread.php?t=366337)

[studentjunk]

Also don't forget about the alternative shashimi (http://forum.xda-developers.com/showthread.php?t=392983), which I think is more fun. Definitey more flexible, but some people aren't fans of it.

[joojoobee666]

DCD I have not been able to receive any pictures since 3.2.3
And I am using Arcsoft MMS 5.0.31.25. I can send but not receive. Have you done any updates for picture mail in 3.2.6

I've cooked some ROMs for my phone probably close to 15 times now since I got it. I always use the arcosft 5.0.31.25 cab file afterward and haven't had a problem. Well, ok scratch that, I HAVE had to install the cab more than once on a few occasions. I'll attach the one I use, maybe it will help you. Let me know.

[TweetyBear]

Also don't forget about the alternative shashimi (http://forum.xda-developers.com/showthread.php?t=392983), which I think is more fun. Definitey more flexible, but some people aren't fans of it.

shashime looks interesting, i'd have to check it out. i probably won't be using it too much though as i don't install too many apps

[Eurostar]

how is this new diamond threaded texting different than the normal wm6.1 threaded texting?

[frazell]

how is this new diamond threaded texting different than the normal wm6.1 threaded texting?

No, it is just a control panel item to turn it on or off.

[flyers2114]

funny thing, tonight i ran into a guy with a titan. he said he heard there is a guy here in town who makes a custom firmware for it :)

You didn't let the cat out of the bag to him?......lol:)

[flyers2114]

Also don't forget about the alternative shashimi (http://forum.xda-developers.com/showthread.php?t=392983), which I think is more fun. Definitey more flexible, but some people aren't fans of it.

+1 on this.....I love it......:D

[Eirikr88]

Download link to the ROM is down. Anyone care to share the love with a link?

[Hypeo]

I got my remote desktop working. I can control my desktop through my phone. Is there a way to do the opposite? I want to control my phone with my desktop. Do I use the same software or do I need something else?

[viper8u2]

I got my remote desktop working. I can control my desktop through my phone. Is there a way to do the opposite? I want to control my phone with my desktop. Do I use the same software or do I need something else?

I use www.mymobiler.com

Works great

[lllboredlll]

The Kitchen is clean, Turn off your antivirus and download it run the application then turn the antivirus on again. make sure you don't have the internet connected just to be safe.

Let me assure you of something. If NOD32 says there is an issue, there most certianly is. This AV software is one of the best on the planet. It's received the ITW(In The Wild) Award for 7 or so years in a row. It's really good at catching virus's that do not presently have a definition yet. The Advanced Heuristics scanning is as good as it gets. It's one of the few that looks at the code not just definitions. So your advice to shut down the AV is a little misleading. You should look into the real reason why it's alerting before you give that sort of advice.


Now with that being said. NOD32 is alerting because the structure of code within the payload. Give me a little more time and I'll post exactly what part of the code it is.

[Switched]

great ROM. thanks dcd

is any one else having trouble making a email account on the phone? it keeps trying to connect and just keeps bringing up the email address and password. dont know whats up

[ryano2121]

The ROM link is down for me too.

[blazingwolf]

Let me assure you of something. If NOD32 says there is an issue, there most certianly is. This AV software is one of the best on the planet. It's received the ITW(In The Wild) Award for 7 or so years in a row. It's really good at catching virus's that do not presently have a definition yet. The Advanced Heuristics scanning is as good as it gets. It's one of the few that looks at the code not just definitions. So your advice to shut down the AV is a little misleading. You should look into the real reason why it's alerting before you give that sort of advice.


Now with that being said. NOD32 is alerting because the structure of code within the payload. Give me a little more time and I'll post exactly what part of the code it is.

It also likes to give false positives. Seen this discussed before.

[blazingwolf]

Download link to the ROM is down. Anyone care to share the love with a link?

The ROM was reporting viruses for some people so dcd took it down.

[Splitter]

The ROM was reporting viruses for some people so dcd took it down.

K.. anyone want to host? I'm ready to flash!!

[Eirikr88]

yeah, im doubting DCD would accidentally or purposely put a virus in the rom. I understand precautions and all, but ill take my chances, worst case scenario ill have to relfash :P

[unvivid]

Wonder when this is going to be back up :(

[Switched]

can some one hep me with my problem on page 6 please
post #59

[unvivid]

looks like the kitchen is still up for those who go that route

http://www.lifesnotsogood.com/dcd1182/titan/kitchens/dcd_titan_kitchen_3.2.6.rar

[mkenny2]

Can someone host the rom...It is sunday so I actually have time to flash.... :(

[dcd1182]

its back up.

http://img57.imageshack.us/img57/9927/nod32bg1.jpg

[lllboredlll]

It also likes to give false positives. Seen this discussed before.

I've seen it do that once or twice but I'd rather be safe than sorry. The act of just simply shutting it off without knowing exactly what it's alerting you to isn't advised. If you're not going to take the time to look into it I'd suggest you run Norton's instead. It's more than happy to let you aquire virus's and malicous script without alerting you to it.

[kudvu002]

no, you'll have to wait until the NOD32 warning is figured out.
you can also download the kitchen and build the rom in about 5 clicks.

thats what i did but everytime i build a kitchen i always get a memory leak somewhere. i unchecked everything internet sharing, office, ect. only had the camera dialers and comm and built it. got 170 on the space and then i would install a program and next program to install space would be down to 120. so i always just run the roms instead!

[TweetyBear]

its back up.

http://img57.imageshack.us/img57/9927/nod32bg1.jpg

great! can't wait to try your new rom out. first timer here :p

[b0ris84]

well my nod still finds it. Not messing with nothing but the nbh file i should b fine

[TweetyBear]

all my antiviruses don't find anything.

[SyXbiT]

how could a virus do anything anyway.
if the virus/spyware on dcd's host machine is x86 (probably windows XP 32 bit), it doesn't matter.
the mogul is an ARM cpu, so it couldn't execute anyway

[the_goldendragon]

DCD
Like I said. you are the best and the one only

[charleskincade]

Hey all, I'm new to the whole kitchen cooking thing but I have the 20270 on my mogul as of now. I want to upgrade to this rom because of the bug fixes. However, there are alot of things on the current rom that I'm using that I like. How do I put those things into this rom? I like the gps navigation of track me and google maps and I use the vogue camera and camera album amongst those things. Can someone point me into the right direction. I just downloaded the rom and the carrier cab from alltel, that's who I'm with, and I just downloaded the kitchen. I need help here, can someone hold my hand on this please? Thanks in advance!

[dcd1182]

how could a virus do anything anyway.
if the virus/spyware on dcd's host machine is x86 (probably windows XP 32 bit), it doesn't matter.
the mogul is an ARM cpu, so it couldn't execute anyway

the concern was over a virus spreading to other users PC's when they run the standalone ROM .exe to update. i have ruled it a false alarm at this point.

[SimpTheChimp]

dcd (and others):

I am running dcd's 3.2.5 ROM - If I install the 3.2.6 ROM will I need to:


Stop the customizations from running?
Will I need to re-run the carrier cab file again?


I'm on Verizon. Thanks!

Once I get this info and backup stuff I will re-install.

Chimp (Tom)

[BillThyCat]

I believe his standalone rom is the same thing as if you run the kitchen and take all the default settings. So if he has to take the rom down again, use the kitchen and just don't check or uncheck any preselected boxes and you should end up with the same rom. DCD correct me if I'm wrong, but I've seen this posted before, so I am assuming it's correct.

WinAntiVirus 2009 has about 100 + different variants, I fight a different variant almost every day at work (I'm a PC service technician along with the many other hats I wear at work), some are extremely easy to clean (just kill the start up exe file and delete the folder), others go in and damage windows beyond repair (remove All Programs Folder, disable control panel, task manager, regedit, and many other features.) I can undo about 98% of what it does damage wise, still haven't found a tweak to restore the All Programs folder, every regedit I have found to turn it back on doesn't work. The folder exists because Programs show up in Classic Start menu (but then Control Panel, Network Connections are missing). There are some real nasty variants of it floating around. I've not seen any versions that spread to other exe files, the pc's are infected by drive by websites/pdf's/flash files, so it's extremely unlikely his rom has it (tho I suppose it's possible if he didn't delete the temporary internet files from his rom, it may have picked up a trace of it there.)

Anyways, if his running Nod32 locally on his machine showed him clean, then I wouldn't hesitate downloading his pre-built rom, as its much easier to flash with. But I still prefer the kitchen so I can turn on a few extra items and disable a couple others I don't use.

Just my 2 coppers.

BTC

[BillThyCat]

dcd (and others):

I am running dcd's 3.2.5 ROM - If I install the 3.2.6 ROM will I need to:


Stop the customizations from running?
Will I need to re-run the carrier cab file again?


I'm on Verizon. Thanks!

Once I get this info and backup stuff I will re-install.

Chimp (Tom)

Always let DCD's customization run, yes you will need to rerun the carrier cab, installing a rom does a hard reset, so everything is set back to DCD's defaults. So you will need to reinstall any apps you use, reconfigure email, etc.

BTC

[friguy33]

Another great rom. I installed and noticed i didnt have to run the carrier cab. makes calls just fine. should i still? im on verizon

[BillThyCat]

Another great rom. I installed and noticed i didnt have to run the carrier cab. makes calls just fine. should i still? im on verizon

Data usually won't work without the carrier cab. The carrier cab usually finished the data setup and sets a couple other things unique to each carrier. So while calls may work, text/sms/gps/data may not.

It's the general consensus that you always install the carrier cab. It shouldn't hurt anything, and can only help.

BTC

[x51]

fixed callwaiting beep ???


Updated from 3.2.5 / 3.42.50 to 3.2.6 / 3.42.50, installed all applications as they were previously.. Call waiting sound has been fixed for me!!

DCD Rocks!!!

[phillymac23]

Went from 3.2.5 .50 radio to 3.2.6 and so far so good. I have backups with SPB Backup and ran my last backup it automatically noticed the rom had changed and restored my system via SPB's rom upgrade option. Everything is back and running fine so far.

[deathwishkid666]

the download link is not working for me can someone re-up somewhere for me, been on new telus rom and am dying to get back on dcd's!

thanks

[whatsit]

Id flashed within an hour of hearing that there was a new version. BUT, my hard reset is literally the time to flash, the 5-10 minutes of UC time, and like 6 config changes, and Im set. My UC even syncs to exchange automatically for mail, contacts, tasks and calendar. So Im down for maybe 20 minutes and lose nothing. (I dont bother registering SPB stuff, it gets reset whenever I feel like it)

Last post on this page, so nobody will ever see it. Sad panda. :(

Congrats on getting your UC setup so thouroughly. I have been trying (off and on) for a while to get my Exchange settings put in a provisioning xml, but haven't had any success. Would you mind sharing your sdconfig.txt and provisioning.xml files to give me a few hints?
Thanks for your help!

[rsatmans]

Hey everything is working great except my phone will not go into evdo it stays in 1x. I am on Sprint, any help would be appreciated. I ran the sprint carrier cab.

[dcd1182]

Hey everything is working great except my phone will not go into evdo it stays in 1x. I am on Sprint, any help would be appreciated. I ran the sprint carrier cab.

that could be for alot of reasons. ill give you all the fixes. obviously if #1 or #2 fix your problem, stop there.

1. try and go to phone settings, internet, get settings
2. install the sprint PPST cab and run /windows/PPST.exe
3. in EPST change M.IP setting from "Mobile IP Only" to "Mobile IP Preferred" and accept, phone will restart. then go back in and change back from "Mobile IP Preferred" to "Mobile IP only" and accept, phone will again restart.

if you dont know what i mean by #2 or #3 search xda, there are plenty of threads on it, sorry I am in a hurry.

also if you have a big sync going or something... your data connection has to be idle before it will switch to Ev
also check fieldtrial.exe or ##DEBUG# and look at the HDR tab, check RSSI and make sure a subnet is listed.

[itster2]

the last time i installed dcd 3.2 .0 i believe.. not exactly sure, i had a problem with irda, i could not open lockboxes with it.. i kept getting communication errors.. also my ekey application did would no longer communicate with ge website.

not sure what caused the issues, but they started as son as i upgraded..

just wondering if anyone else had these issues and have been resolved

[friguy33]

so i installed 3.2.6 and am now getting the fastest GPS locks ive ever gotten. what ever you did...keep doing it! thanks again

[mkenny2]

3.2.6 installed and running great! Thanks DCD!

[five40]

just flashed yesterday oh well

[MidnighToker]

Also don't forget about the alternative shashimi (http://forum.xda-developers.com/showthread.php?t=392983), which I think is more fun. Definitey more flexible, but some people aren't fans of it.

This looks very cool. The one thing that stops me from jumping on the bandwagon right away is the fact that I JUST got 3.2.5 up and running yesterday the way that I like it (apps and such). I'll probably get bored tomorrow and do it anyway, but this may give me an easy way to get back up and running.

[parcou]

This looks very cool. The one thing that stops me from jumping on the bandwagon right away is the fact that I JUST got 3.2.5 up and running yesterday the way that I like it (apps and such). I'll probably get bored tomorrow and do it anyway, but this may give me an easy way to get back up and running.

If I were you, I would run my backup program and have a saved copy of the rom/kitchen you are on. Then do the upgrade...if you find it is not to your taste...reload the old rom and run your backup last. Then you will be back to where you began...

just my thought...

[ryano2121]

I cannot get a data connection with this ROM. The Verizon Wireless connection doesn't even show up in the "manage connections" box. I finally flashed back to 3.2.5. and it is working fine.

[faceless]

whooo, perfect time for me to prepare a tasty meal for my mogul!

[freemobile]

I ran the sprint carrier cab and now each time i reboot i get to the today screen and then nothing works ! What should I do ?None of the buttons work so I cannot do an hard reset either

:(



EDIT: ok a hard reset seems to have fixed the problem for now PHEW

[ilkhan]

Congrats on getting your UC setup so thouroughly. I have been trying (off and on) for a while to get my Exchange settings put in a provisioning xml, but haven't had any success. Would you mind sharing your sdconfig.txt and provisioning.xml files to give me a few hints?
Thanks for your help!
exchange xml (xml4 in the sdconfig)
<wap-provisioningdoc>

<characteristic type="Sync">
<characteristic type="Connection">
<parm name="Server" value="owa.exchangecentral.net"/>
<parm name="User" value="mail@mail.com"/>
<parm name="Password" value="passwordhere" />
<parm name="SavePassword" value="1" />
</characteristic>
<characteristic type="Mail">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Calendar">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Contacts">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Tasks">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Notes">
<parm name="Enabled" value="1"/>
</characteristic>
</characteristic>

</wap-provisioningdoc>
sdconfig
LOCK:Enabled
HIDE:Disabled
CAB: \Storage Card\My Documents\My Programs\bejeweled2.ppc_2577.wm5.cab
CAB: \Storage Card\My Documents\My Programs\calc98a.cab
CAB: \Storage Card\My Documents\My Programs\calendarplus.cab
CAB: \Storage Card\My Documents\My Programs\dof.ppc30_arm.cab
CAB: \Storage Card\My Documents\My Programs\dopewars.ppc3_arm.cab
CAB: \Storage Card\My Documents\My Programs\ephemeris.ppc30_arm.cab
CAB: \Storage Card\My Documents\My Programs\googlemaps.cab
CAB: \Storage Card\My Documents\My Programs\gpstuner_v5.cab
CAB: \Storage Card\My Documents\My Programs\HTC_TaskManager_2.1.34072.100.cab
CAB: \Storage Card\My Documents\My Programs\gullumkeyboard.cab
CAB: \Storage Card\My Documents\My Programs\gullumkeyboardenglish.cab
CAB: \Storage Card\My Documents\My Programs\monopoly.arm.cab
CAB: \Storage Card\My Documents\My Programs\musicid-dxm.cab
CAB: \Storage Card\My Documents\My Programs\spbmobileshell2.arm.cab
CAB: \Storage Card\My Documents\My Programs\spbtime2.arm.cab
CAB: \Storage Card\My Documents\My Programs\tasksplus135.cab
CAB: \Storage Card\My Documents\My Programs\wmwifirouter.cab
CAB: \Storage Card\My Documents\My Programs\MSVC16.CAB
CAB: \Storage Card\My Documents\My Programs\Serf FixPopUp.cab
CAB: \Storage Card\My Documents\My Programs\sprint.cab
LOCK:Disabled
HIDE:Enabled
XML: \Storage Card\settings.xml
CAB: \Storage Card\My Documents\My Programs\paracount_v1.2.5.cab
CAB: \Storage Card\My Documents\My Programs\spbpocketplus4.arm.cab
RST: Reset

[LilRico]

Very nice ROM, Thanks DCD for all your efforts! :)

[ryanwood]

awesome work dcd!

best rom so far IMO and ive been following/flashing your work for well over a year now (since the ppcgeek days) :)

[cleanser]

Seriously guys, send DCD some beers, He does so much work for us. His roms are the best. And without him alot of us would be bored out of our minds and buying stupid things like iPhones. He and GC deserve a brew or 2. The amount of work put in by these guys on this forum justifies the donation of a Beer or 2. We wouldn't be on these forums GPS support and user forum without these 2 guys.

[shubhanyu]

I did ... ! Sent my small contrib yesterday! :D Had been a leacher till now, and yesterday contributed my part for using such an excellent ROM ... Keep up the work, DCD ... truly awesome .. :)

[BillThyCat]

Yesterday morning I noticed in my exchange account settings I could select text or HTML for email, up til that point it was always locked at text. I of course have since hard-reset and done a few other things and HTML is no longer selectable, it's grayed out. Anyone know what causes it to not be selectable, or how to re-enable it? I get a lot of emails in HTML and they are ugly in text mode.

BTC

[itster2]

i would make a contribution if the instructions were layed out a little clearer for creating kitchens and so forth and answering questions. but my question was simply ignored as if it didnt even exist.

[nitro66215]

i would make a contribution if the instructions were layed out a little clearer for creating kitchens and so forth and answering questions. but my question was simply ignored as if it didnt even exist.
Your question is definitely unique. Because it's in the middle of a new rom thread, that's probably why it wasn't answered. Not many people may use the IRDA. Post a new thread in the Upgrade forum and you may get an answer. Unfortunately, I haven't used it once, so I'm no help.

[fibrizo]

i would make a contribution if the instructions were layed out a little clearer for creating kitchens and so forth and answering questions. but my question was simply ignored as if it didnt even exist.
In general people are more than willing to help in my experience. ROM flashing is not something to be taken lightly, and you should read up on the whole process before you start. One of the problems with your questions (likely why you haven't had much in terms of response) is that you do not provide the details of your problems with your IR. ie My IR doesn't work. It would be helpful if you provided ROM info and what you have enabled and not enabled, and the error that you are getting. If the stock verizon rom had the same problem with behavior and you needed to replace the entire phone, then perhaps it was hardware rather than software. The point is that often people don't respond to questions they cannot answer based on a lack of information. And I can say that I will personally ignore questions that do not provide information, or the extremely basic ones that you might get from reading the faq or wiki.

BTW Good work on this Rom so far DCD. I was wondering, there was a post a while back that added Japanese text input to the rom. It replaces the Wince.nls. I think it was written for your 3.0.1 rom though. I keep just replacing the winCE.nls file in the sys folder and all seems well, but is this breaking anything? I noticed that on this rom, the hardware keyboard sensitivity seems down. I can type and it will skip some letters that I press. If I go back and type each letter again with a harder keypress, it shows up.

[Blitzed26]

I saw !! :D Great work DCD ... faster and more memory conscious ROM ... too good! For the first time ever, I donated! Look for an entry from scriba designare ... :D Scintillating work, DCD ...

Can you share of PM your sdconfig file, specifically the settings to set up exchange service sync. (I realize that you will want to block out your specific settings). I would love to incorporate this automation into my UC setup.

Thanks!

[ebor]

Does anybody know how to remove the Samsung Omni D3D driver. It causes Slingmedia Mobile to produce an erratic video. I added it by CAB to 3.2.5 and noticed it. When I removed the CAB it went back to normal. Now that the Samsung drivers are in the kitchen of 3.2.6 I would like to remove it and use the drivers that were in 3.2.5. Thanks

[whatsit]

exchange xml (xml4 in the sdconfig)
...
(code blocks removed from quote for brevity)
...


That's great. Thank you, very much.

[aleksukomeng]

wow the samsung omnia d3d driver works well.

thanks dcd

[Captdude]

Good messaging does not let me open programs? Is there a registry change or 3rd party program to let me open programs. 3.2.5 had the same problem and I went back to 3.2.3
I just upgraded from 3.2.3.

Thanks for any help

P.S. Just sent a donation

[ebor]

wow the samsung omnia d3d driver works well.

thanks dcd

I would agree it sames to work great with everything else. Have you tried it with Slingplayer Mobile?

[craig540]

Does anybody know how to remove the Samsung Omni D3D driver. It causes Slingmedia Mobile to produce an erratic video. I added it by CAB to 3.2.5 and noticed it. When I removed the CAB it went back to normal. Now that the Samsung drivers are in the kitchen of 3.2.6 I would like to remove it and use the drivers that were in 3.2.5. Thanks

I was just about to flash. But not now, I must have my slingplayer.
Waiting for a solution.

[nitro66215]

I was just about to flash. But not now, I must have my slingplayer.
Waiting for a solution.
I would think if you download the kitchen and delete the dcd_samsungD3Ddrv directory from the sys folder... that it would be removed. I'm not sure what affect it will have on the rom. But, it's a thought. DCD would have to chime in and see if this is the solution.

[ande8150]

I was just about to flash. But not now, I must have my slingplayer.
Waiting for a solution.

+1 on that. Slingplayer is a must have.

[jeffgman]

Is anybody having any issues with getting bluetooth headsets to connect with 3.2.6? I installed the new ROM yesterday, and ever since my Motorola H685 or Jabra BT350 are not connecting. I am able to get both devices to pair correctly with the phone, they show up correctly in the devices screen, but they will not connect with the phone. I had no problems with the Motorola or Jabra with the 3.2.5 rom. I tested the Motorola on a different phone and it works fine. So, it is definitely something with the rom.

Just wondering if anybody else has had any issues.

[flyers2114]

I would agree it sames to work great with everything else. Have you tried it with Slingplayer Mobile?

What is happening....I have Slingplayer and mine works fine with the driver....

[brandonb8]

DCD,

First time posting here but Ive been following these roms for a while. I have previously used no2chems rom but with the lack of updates I decided to try your build. Very impressed with the speed and lack of bugs. Battery life is not quite as good as no2 5069 builds but overall i like this rom better. One issue I am having is that my text messages are erased after a soft reset. some threads indicated this was because the messaging program was not closing but i have been using wktask to close all programs before a soft reset. the mssages are still disappearing. i used pim t restore texts from yhe 3.2.5 build and these are not being erased. any ideas here? thanks again for all your work.

posted on my mogul with dcd 3.2.6

[Protonus]

dcd:
Is there a list of what has been done in the current rom - (stock, not cooked in a kitchen) - IE a total list of changes / customizations / hacks - not just what's changed since the last build. I'm new to your ROM's since 3.2.5, so I'm not familiar in what has already been included.
For instance, I'm trying to determine if the no2chem battery driver hack for 1% increments is included in the ROM. etc. Thanks

[Protonus]

Also - can someone who has flashed this ROM, slide open the keyboard / go into landscape, and bring up the symbol pad (either the on screen icon, or BLUE+tab(sym), and see how many pages of symbols there are? Thanks.

I'm trying to fix the issue that I only have 11 pages of symbols instead of 15 pages per this thread (which has screenshots of what I'm reffering too):
http://forum.ppcgeeks.com/showthread.php?t=35305
and I'm wondering if 3.2.6 will take care of this.

[belvedere]

Also - can someone who has flashed this ROM, slide open the keyboard / go into landscape, and bring up the symbol pad (either the on screen icon, or BLUE+tab(sym), and see how many pages of symbols there are? Thanks.

I'm trying to fix the issue that I only have 11 pages of symbols instead of 15 pages per this thread (which has screenshots of what I'm reffering too):
http://forum.ppcgeeks.com/showthread.php?t=35305
and I'm wondering if 3.2.6 will take care of this.
I flashed 3.2.6 last night... and yes, I have 15 pages of symbols when you press Alt+Sym.

[peepeesea]

what exactly do the Omnia drivers do? i have not noticed any difference in video playback...

[Protonus]

One last thing. Can someone enable Wi-Fi, then open a VPN connection, and let the phone go to sleep while VPN is still connected. Wait a good like 5 minutes. And try to wake the phone up - power button per usual, and post up if the phone wakes up or not. My phone always locks up when this happens, and I have to soft reset it. I can't let it fall asleep or this happens, I've seen others post up about this problem too. Was curious if DCD knew of a fix or if this ROM fixed it. Unfortunatly "VPN" is too short of a string to search for and I've found very little info re: this issue. Thanks!

[ebor]

What is happening....I have Slingplayer and mine works fine with the driver....

When I add the driver - I guess the best way to decribe it is the video looses its smoothness and you can see a jerkiness. When I removed the Samsung driver in 3.2.5 it went back to smooth video.

Now that I have 3.2.6 loaded it is no longer smooth video.

[Protonus]

I flashed 3.2.6 last night... and yes, I have 15 pages of symbols when you press Alt+Sym.

Appreciated! Thanks!

what exactly do the Omnia drivers do? i have not noticed any difference in video playback...

They are SOFTWARE accellearted (ie they aren't using the phones chipset per se to provide acceleartion) - 3d ONLY drivers. They are not going to to much if anything for 2d (ie video, etc). They are for rendering objects in 3d, and if software is able to take advantage of them (which not very much does) - you will see a large boost in 3d performance.

I can't imagine them changing anything in regards to 2d / video performance.

[Summit1]

Seriously guys, send DCD some beers . . . That might be detrimental to the quality of his work! :eek: This is great work. Rather than send beers, I wonder how many of us have followed through the "donate to me" link in his signature? :)

[im1badazchick]

Hey Guys!...first i'd like to thank DCD for his brilliant work with 326...it's the first time that i've used his rom and it's really good...even the 3d drivers are functioning well...i use vtap to watch vids sometimes and on the other custom rom i had prior to 326 if i selected direct draw it was slow but in 326 if it's selected it moves as it should and is extremely smooth...now comes my problem...i am with cricket and everything normally works including the gps but on 326 even if i use a cab that's preconfigured for cricket(arcsoft 5) it doesn't work ...it just sits there and saves to the draft folder...if i get a pic...it comes but it sits there as well without loading... are any of you guys/girls using 326 able to receive/send pics..thanks in advance and sorry for the long drawn out story but i was trying to explain in as much detail as i possibly could..hope you guys are enjoying your day:)

[nitro66215]

Hey Guys!...first i'd like to thank DCD for his brilliant work with 326...it's the first time that i've used his rom and it's really good...even the 3d drivers are functioning well...i use vtap to watch vids sometimes and on the other custom rom i had prior to 326 if i selected direct draw it was slow but in 326 if it's selected it moves as it should and is extremely smooth...now comes my problem...i am with cricket and everything normally works including the gps but on 326 even if i use a cab that's preconfigured for cricket(arcsoft 5) it doesn't work ...it just sits there and saves to the draft folder...if i get a pic...it comes but it sits there as well without loading... are any of you guys/girls using 326 able to receive/send pics..thanks in advance and sorry for the long drawn out story but i was trying to explain in as much detail as i possibly could..hope you guys are enjoying your day:)
are you successful at getting a data connection? Browsing the internet?

[flyers2114]

When I add the driver - I guess the best way to decribe it is the video looses its smoothness and you can see a jerkiness. When I removed the Samsung driver in 3.2.5 it went back to smooth video.

Now that I have 3.2.6 loaded it is no longer smooth video.

I will play with it some more later tonight and see if I can reproduce your problem....I will play with the settings....I have been running mine for about 3 weeks since the driver came about with no problem....I will run it with and without later and either PM you or post here....

[flyers2114]

are you successful at getting a data connection? Browsing the internet?

Nitro you were able to get your roaming issue resolved......

[nitro66215]

Nitro you were able to get your roaming issue resolved......
Nope. Won't be able to until I can get the PPST files from the Extrom of the Verizon update that is still under testing. :(

[im1badazchick]

are you successful at getting a data connection? Browsing the internet?
Hey Nitro sorry i stepped away lol...i reloaded my previous custom rom which had arcsoft included and it works perfectly but i wanted to try something newer since i have had this one since atleast may...yes i was able to get data up and running easily but when i would try to send a pic it would never connect and would always save it to the draft folder..same with recieving...i sent myself a pic from my email address and it did come but would not load and it too gave me the same response...saving to folder...for some reason it won't connect or send out with pics but internet is fine:p
everything else as i have stated was excellent..love the speed and everything

[ebor]

I will play with it some more later tonight and see if I can reproduce your problem....I will play with the settings....I have been running mine for about 3 weeks since the driver came about with no problem....I will run it with and without later and either PM you or post here....

I would greatly appreciate that. It only seems to affect Slingplayer of the programs I have, of which none are 3D. That's why if I could remove the driver it would solve my problem. I hate to go back to 3.2.5 since each version seems to get better and better. I join in thanks to DCD for putting together such a fine program.

[ilkhan]

Whats with the new interface for selecting files (IE: in the today options finding a wallpaper)? Its cumbersome and doesnt appear to dig through the memcard. I dislike it. :(

[nitro66215]

Hey Nitro sorry i stepped away lol...i reloaded my previous custom rom which had arcsoft included and it works perfectly but i wanted to try something newer since i have had this one since atleast may...yes i was able to get data up and running easily but when i would try to send a pic it would never connect and would always save it to the draft folder..same with recieving...i sent myself a pic from my email address and it did come but would not load and it too gave me the same response...saving to folder...for some reason it won't connect or send out with pics but internet is fine:p
everything else as i have stated was excellent..love the speed and everything
Hmm... Cricket.... Only thing I can think of is verify that the Carrier Cab installed properly... re-install it... that won't hurt anything. As far as Arcsoft working properly, I know of the Verizon version floating around. I'm not sure about Cricket's version. Mine was giving me similar problems initially. After going to Settings,Connections,Connections... and Manage existing connections... I had to edit the username and password. Once that was set... I had no problem sending or receiving.

[x51]

Is anybody having any issues with getting bluetooth headsets to connect with 3.2.6?.......
........
Just wondering if anybody else has had any issues.

My Jabra BT3030 works fine.
I assume you've performed a soft reset?

I've had issues in the past where suddenly it wouldnt connect. Turn off the bluetooth headset, disable bluetooth on the phone, re-enable blue tooth, turn the headset back on... that usually works for me. If not.. soft reset does it.

Ive had those issues since stock though.. and they got less since I started with my DCD rom addiction. It doesn't happen very often anymore.

I assume you have done all of this though?

[im1badazchick]

Hmm... Cricket.... Only thing I can think of is verify that the Carrier Cab installed properly... re-install it... that won't hurt anything. As far as Arcsoft working properly, I know of the Verizon version floating around. I'm not sure about Cricket's version. Mine was giving me similar problems initially. After going to Settings,Connections,Connections... and Manage existing connections... I had to edit the username and password. Once that was set... I had no problem sending or receiving.Thanks Nitro i will try to figure it out..i reinstalled my previous rom because i'm use to having everything working and i do love it but it's build 19209(yes older 6.1) i believe but i never updated it because it is sooo stable and i just love it but after trying 326 i fell in love with it...i now see why you guys say DCD is so great:D...just can't get it to connect to send or recieve pics/vids:confused: but i have no problem launching the browser or any program that makes a connection to data ..forgot to mention that i used the dcd rom not the kitchen..i'd really be lost there lol:p

[jeffgman]

My Jabra BT3030 works fine.
I assume you've performed a soft reset?

I've had issues in the past where suddenly it wouldnt connect. Turn off the bluetooth headset, disable bluetooth on the phone, re-enable blue tooth, turn the headset back on... that usually works for me. If not.. soft reset does it.

Ive had those issues since stock though.. and they got less since I started with my DCD rom addiction. It doesn't happen very often anymore.

I assume you have done all of this though?

Yes. I have soft reset the device numerous times, turned on and off the bluetooth device and turned on and off bluetooth on the phone.

Weird, I have never had a problem with any custom rom until this one. Of course, I have only been using the custom roms since about version 3.2.2.

I will mess around with it and see if I can figure anything out. I might have to reinstall 3.2.5. It is just a bummer because I now have the device all set up again. Oh well, such is life I guess.

Thank you for responding with your suggestions.

[x51]

...but after trying 326 i fell in love with it...i now see why you guys say DCD is so great:D...just can't get it to connect to send or recieve pics/vids:confused:


If you are on a working rom... Export the Arcsoft Reg Key (HKLM>Software>Arcsoft) Flash 3.2.6, install Arcsoft and merge the reg key. that should do it... (I'm pretty sure) thats how I would get mine working in previous roms before GC's most excellent automated VZW install.

[digitalmonk73]

Just sending out a big thanks to DCD (and others) for this ROM and all the updates you have been doing.

Beers are on their way! :D

[whbell]

Is anybody having any issues with getting bluetooth headsets to connect with 3.2.6? I installed the new ROM yesterday, and ever since my Motorola H685 or Jabra BT350 are not connecting. I am able to get both devices to pair correctly with the phone, they show up correctly in the devices screen, but they will not connect with the phone. I had no problems with the Motorola or Jabra with the 3.2.5 rom. I tested the Motorola on a different phone and it works fine. So, it is definitely something with the rom.

Just wondering if anybody else has had any issues.

My Blueant Z9 v4 is working perfect in this 3.2.6 Kitchen build.

[mulletmandan]

OK, two quick questions. Please realize that this is my first ROM flash. I read all of the Wiki information and didn't see answers to these questions.

First, where do I put the carrier CAB file? I can't seem to figure this out. I extracted all of the kitchen files, but I don't see anywhere to put this.

Second, are system tweaks already applied in dcd's ROMs? I have several performance tweaking CABs, but I'm not sure if I should set these to automatically install or not.

Thanks for all the help! I'm pretty pumped to jump into the world of PPC hacking :)

EDIT: After rereading the first post, it seems like the carrier CAB just needs to be installed at some point to have internet. Is that the case? If so, I'm assuming I could just add it to the UC script, correct?

[belvedere]

OK, two quick questions. Please realize that this is my first ROM flash. I read all of the Wiki information and didn't see answers to these questions.

First, where do I put the carrier CAB file? I can't seem to figure this out. I extracted all of the kitchen files, but I don't see anywhere to put this.

Second, are system tweaks already applied in dcd's ROMs? I have several performance tweaking CABs, but I'm not sure if I should set these to automatically install or not.

Thanks for all the help! I'm pretty pumped to jump into the world of PPC hacking :)

EDIT: After rereading the first post, it seems like the carrier CAB just needs to be installed at some point to have internet. Is that the case? If so, I'm assuming I could just add it to the UC script, correct?
doesn't matter where the carrier cab is put... just make sure you install it. i assume it needs to be installed to the device (versus the storage card). not sure about the performance tweaks, because i don't know all the ones that you do. i noticed with the usual battery tweaks some of the 'DisablePowerManagement' are still set to 1.

[supacold]

i noticed a few minor problems with the rom.
When im charging the phone the light continues to flash rather than a solid light.
And it flashes orange even though the battery is above 50%.
Also at the task manager at the top right corner of the home screen is missing, i would have to manually go to start>task manager> end all task.

other than that everything is fine from what i can see.

Another note, how do i use remote desktop moblie?? what does it mean by domain? and how do i enroll? i want to connect it to my desktop at home thats on a 3com wireless router.

[electronicrice]

i noticed a few minor problems with the rom.
When im charging the phone the light continues to flash rather than a solid light.
And it flashes orange even though the battery is above 50%.
Also at the task manager at the top right corner of the home screen is missing, i would have to manually go to start>task manager> end all task.

other than that everything is fine from what i can see.

Another note, how do i use remote desktop moblie?? what does it mean by domain? and how do i enroll? i want to connect it to my desktop at home thats on a 3com wireless router.

Odd, I haven't experienced any of these issues. Might just be your configuration? Have you tried to reflash?

[supacold]

Odd, I haven't experienced any of these issues. Might just be your configuration? Have you tried to reflash?

reflash the rom? do i just run the rom again or do i need to "relock it"sorrry for my ignorance but could you please explain?
The screen shot of the phone from the OP also doesnt show the task manager at the top right corner on the 4th screen shot.

[dunebuggydude11]

u can either hard reset by holding the two soft keys with dots on them and pushing the reset button, or yes, you can completely reflash by running the Rom Update utility again.

[studentjunk]

have you gone to start\settings\system\task manager? There are two in mine. The one on th eleft with the checkmarks is the one that has the settings for this. If you click on 'button' tab and then check 'enable quickmenu on Today screen', and you will have it. See pics attached below.

[dunebuggydude11]

oh, by the way, thx again dcd for 3.2.6. it is definitely the best rom out there

[b0ris84]

what version of the task manager are you using that works on this rom. The one that i used caused the top bar to fully disappear when i opened the keyboard


Ummm scratch that. only did it with no2's roms doesn't do it with dcds :)

[supacold]

have you gone to start\settings\system\task manager? There are two in mine. The one on th eleft with the checkmarks is the one that has the settings for this. If you click on 'button' tab and then check 'enable quickmenu on Today screen', and you will have it. See pics attached below.

Ahh i see... i only have one task manager, the one with the green lines. Where and how can i get the other task manager??

Nvm i found it, thanks

[dcd1182]

I got UC running good, but is there a way to have some apps install onto the SD card?
no, this is a limitation of autorun. all cabs install to the device.

picture mail in 3.2.6
my ROMs do not include any MMS related software. anything used for MMS would have to be installed by cab.

I feel I should also mention that I am in no way trying to circumvent your ROMS/work.
i just had to say my disclaimer, its all good.

hey dcd is SprintTV included somewhere in the kitchen?
no, doesnt it come as a .cab in the sprint ROMs? i thought people were installing that way.

Could you please include the dialer popup fix?
it is included, an OEM or UC entry you are including has to be changing the registry key.

Hey dcd, is there a change log for the carrier cabs as well some place? Also I noticed you already have folders for Victor and Herman. How long do you think it would take to dcd'ize them?
i do not keep a changelog of carrier cabs as any change to them is always minor.
i have not done much work on victor or herman yet.

Download link to the ROM is down. Anyone care to share the love with a link?
to my knowledge, there has been zero downtime since N715DP started hosting my stuff. if i typo a link, you can always browse here (http://lifesnotsogood.com/dcd1182).

I want to control my phone with my desktop.
the ppc files required for Activesync Remote Display are included in the ROM. Activesync Remote Display is part of the Windows Mobile Developer Power Toys (http://www.microsoft.com/downloads/details.aspx?familyid=74473FD6-1DCC-47AA-AB28-6A2B006EDFE9&displaylang=en).

there are alot of things on the current rom that I'm using that I like. How do I put those things into this rom?
you would need to acquire .cab files for them to install on the phone after flashing the ROM. the vogue camera is available in the kitchen if you wanted to build your own.

could not open lockboxes with irda....ekey application did would no longer communicate with ge website
what are lockboxes that open with irda? what is ekey? im sorry i am not familiar with these things. i do not have any way to test irda other than the fact that i can see red light come out of the port in the dark and i have confirmed my irda settings with a few other rom chefs.

I cannot get a data connection with this ROM.
did you install the carrier cab?

[dcd1182]

<wap-provisioningdoc>

here are some further options. i obtained these by manually setting up my activesync options, then running a rapiconfig query. this is explained in the UC thread linked in post #1.


<wap-provisioningdoc>
<characteristic type="Sync">

<characteristic type="Settings">
<parm name="BodyTruncation" value="1024"/>
<parm name="SyncWhenRoaming" value="1"/>
</characteristic>

<characteristic type="Connection">
<parm name="AllowSSLOption" value="1"/>
<parm name="Domain" value="domain"/>
<parm name="SavePassword" value="1"/>
<parm name="Server" value="mail.domain.net"/>
<parm name="UseSSL" value="0"/>
<parm name="User" value="user"/>
<parm name="Password" value="password"/>
</characteristic>

<characteristic type="Mail">
<parm name="Enabled" value="1"/>
<parm name="EmailAgeFilter" value="0"/>
<parm name="MailBodyTruncation" value="-1"/>
<parm name="MailFileAttachments" value="0"/>
</characteristic>

<characteristic type="Calendar">
<parm name="CalendarAgeFilter" value="5"/>
<parm name="Enabled" value="1"/>
</characteristic>

</characteristic>
</wap-provisioningdoc>

[Tannerj]

Is there away to restore the text messages after the new Rom installed. I know where the messages are stored and have tried to back them up, but when I put them back in the messaging folder (under windows) I am unable to read them from the contacts.

thanks....

[ilkhan]

here are some further options. i obtained these by manually setting up my activesync options, then running a rapiconfig query. this is explained in the UC thread linked in post #1.
Useful.
/me edits that into a version of his xml and tries it before putting it in his main xml.

[dcd1182]

Seriously guys, send DCD some beers
I did ... ! Sent my small contrib yesterday! :D
For the first time ever, I donated!
Just sent a donation
Beers are on their way! :D
thank you all very much, it is appreciated!!
but digitalmonk73 whats with that sharks avatar?! :) (just kidding)

[dcd1182]

HTML for email....what causes it to not be selectable
this is a feature of Exchange 2007. If you have not yet synced anything, the phone doesnt know what version of Exchange is on the server end. You can select HTML, then sync to an Exchange 2003/2003SP1 server and the option will return to text.

i would make a contribution if the instructions were layed out a little clearer for creating kitchens and so forth and answering questions. but my question was simply ignored as if it didnt even exist.
noone needs to make a contribution unless they feel they want to. my releases are in no way contingent upon contributions. but please know that i just had not had time to get to your question yet. i usually make an effort to answer all questions for the first few days after a release. i also do tend to ignore some questions if they are answered elsewhere in the thread (by someone else or in areas linked in post #1) but this was not the case with your question.

I keep just replacing the winCE.nls file in the sys folder and all seems well, but is this breaking anything?
its not breaking anything. if you wanted to be picky, the proper way would be to replace the WinCENLS_WWE package with its japanese equivalent. but as long as this works for you, go for it. this package doesnt seem to be build specific, and if it ever does become that way, you could dump a newer japanese rom...

Does anybody know how to remove the Samsung Omni D3D driver
well stupidly i removed the stock driver. i should have instead had the omnia driver parse later and overwrite the reg key. i have made a cab of the stock driver for you until next release.

Good messaging does not let me open programs? Is there a registry change or 3rd party program to let me open programs. 3.2.5 had the same problem and I went back to 3.2.3
I just upgraded from 3.2.3.
can you show me a screenshot of what you are talking about? i have never used Good messaging. if it worked in 3.2.3 it should narrow down the possibilities..

Is anybody having any issues with getting bluetooth headsets to connect with 3.2.6?
mine is working fine, but i only have one model here to test. i have not made any BT changes in quite a while.

my text messages are erased after a soft reset.
I have not seen anything like this. Can you try with a clean ROM and see if you have the same results?

a total list of changes / customizations / hacks - not just what's changed since the last build.
the changelog.txt included in the root kitchen folder is the entire changelog back to version 1.6.5 when the changelog began. the 1% battery driver is included.

see how many pages of symbols there are?
whoops, I did replace the sympad files using the latest official ROM, and forgot to list it in the changelog. it should be fine now.

VPN connection....Wait a good like 5 minutes.
i downed my openvpn server in favor of MS VPN and have not rewritten rules to move VPN traffic to that host yet. in other words i cant vpn home right now. i will try and finish setting that up so i can test this.

That might be detrimental to the quality of his work!
in all honesty i pretty frequently come home after a few drinks and put a little bit of time into the kitchen. it gets tested :)

on 326 even if i use a cab that's preconfigured for cricket(arcsoft 5) it doesn't work
can you point me to the cab you are using? i cannot test since i have sprint, but maybe something will stick out.

Whats with the new interface for selecting files (IE: in the today options finding a wallpaper)? Its cumbersome and doesnt appear to dig through the memcard. I dislike it. :(
not sure what you mean. if its changed, MS has changed it at some point in WM builds.

When im charging the phone the light continues to flash rather than a solid light.
someone else correct me if im wrong, but i think that means your device is overheating. have you reset ?

[Protonus]

i downed my openvpn server in favor of MS VPN and have not rewritten rules to move VPN traffic to that host yet. in other words i cant vpn home right now. i will try and finish setting that up so i can test this.

Thanks so much! Let me know if there is anything else I can do to troubleshoot! I'm not positive the issue is with your rom, might just be indictitive of an issue with WinMo6.1. :shrugs: But if you can figure out a fix regardless that would be awesome!

[flyers2114]

I would greatly appreciate that. It only seems to affect Slingplayer of the programs I have, of which none are 3D. That's why if I could remove the driver it would solve my problem. I hate to go back to 3.2.5 since each version seems to get better and better. I join in thanks to DCD for putting together such a fine program.

I played with it and my video is identical either way I try it......it is weid that that is affecting the 2D as it should not....:confused:

[ilkhan]

I've been looking through the MS KB files on the config files, its hard to read but this is the most detailed listing of possible settings Ive found.
http://msdn.microsoft.com/en-us/library/aa455976.aspx

[Scrufdog]

If the light keeps flashing orange while charging it either means your battery is overheating, or you have a notification... or had one and the hook never reset.

....

I've actually experienced a small problem this time around. Every time I soft reset my wifi comes on, even when the switch is off. A quick on/off kills it.

[flyers2114]

someone else correct me if im wrong, but i think that means your device is overheating. have you reset ?

Yes if it flashing it is overheating.....reset should take care of it....:D

[jlc403]

My mogul is running 3.2.6 with sprint radio 3.42.02. It has a PRI of 2.00_003
I flashed my dad's with 3.2.5 with sprint radio 3.42.02. His has PRI of 1.24_003

What are the main differences between these two? Pardon my ignorance, but is this built into the 3.2.6 upgrade or is there another factor?

Things seem to be working ok on both, except that my trial software built into rom is now coming up as expired without allowing me to input my (legitimate) serial numbers, whereas my dad's build is allowing me to run trials for a few days. There are no other differences between my builds except for changes by dcd.

Is there any info out there or someone who might be able to help?
Thanks!!

[mettercomputers]

does anyone know if it's possible to get the extended rom visible and writable on this rom?

i have stuff there from n2c's rom that i need to be able to use. thanks.

try the below unzip and follow directions and let me know how it works for you
works great for me.

[im1badazchick]

Thanks DCD here is the Arcsoft for Cricket...hopefully you will see something that i haven't and can help:)...thanks so much and i hope that you enjoy your night

[rleejr79]

Is there away to restore the text messages after the new Rom installed. I know where the messages are stored and have tried to back them up, but when I put them back in the messaging folder (under windows) I am unable to read them from the contacts.

thanks....

Check out a little prog called PIMBackup. Search around, it is in the forums somewhere. Saves calls, appointments, SMS, tasks, etc... and can restore to that point. By the way..make sure you save the backup on the storage card.

[boiker]

I've tried the stock rom, no2chem's, and dcd's. With dcd's, my time zone always reverts to mountain (I'm Arizona, a non-standard mountain time zone). On stock and no2chem's, my timezone stays as Arizona MTN time, even after syncing with the network.

Any thoughts on my issue?

[ebor]

I played with it and my video is identical either way I try it......it is weid that that is affecting the 2D as it should not....:confused:

Thanks for trying. It's particularly bad if you watch a scrolling screen on a news channel. Anyway, DCD was kind enough to create a cab of the original drivers and that will solve my problem.

[jeffgman]

mine is working fine, but i only have one model here to test. i have not made any BT changes in quite a while.



I went ahead and redid the rom via the kitchen and installed it again. This time my bluetooth devices are working perfectly. Very weird, but I guess something got messed up with the first build or install.

Jeff

[flyers2114]

Thanks for trying. It's particularly bad if you watch a scrolling screen on a news channel. Anyway, DCD was kind enough to create a cab of the original drivers and that will solve my problem.


Yea I seen that....as long as you gotta fix your good to go!!:D

[brandonb8]

DCD,

Sorry I should have posted that I installed a clean ROM and did not build from a kitchen. The odd thing is that I went ahead and tried installing two different ROMS tonight and saw the issue in both. No2's pre8 build had the problem and also JD from ppcgeeks. I am going to flash a stock rom to it and then try to reinstall your 3.2.6. IF I reset using the power button, the text messages are saved, however using the soft reset hole the text messages are deleted even if I have closed the messaging app in task manager. I will try to see what happens and report back. Thanks for the reply and I appreciate all your work.

[Captdude]

can you show me a screenshot of what you are talking about? i have never used Good messaging. if it worked in 3.2.3 it should narrow down the possibilities..

http://www.good.com/corp/int_products.php?id=33

DCD,
Here is a link, it is a memory hog and gets into everything. Its a must have for my work email, on a good note the contact sync feature is nice for re-flashing.

Again the symptom was unable to open programs after install this was the only program installed after re-flashing. I can get to them just not open them.

Thanks again for all your help.

[jdoc]

No, it is just a control panel item to turn it on or off.

I can't seem to find this control panel. Could someone please point me in the right direction? I would like to be able to turn off the threading. Thanks in advance...

[nitro66215]

I can't seem to find this control panel. Could someone please point me in the right direction? I would like to be able to turn off the threading. Thanks in advance...
There is a Registry key.... give me a minute to do a search

Add this key with the value

HKCU\Software\Microsoft\Inbox\Settings\OEM\SMSInbo xThreadingDisabled=1

[Captdude]

This worked for me for turning-off the threaded message.

http://forum.xda-developers.com/showthread.php?t=394219

[jsmz]

quick question for you dcd.

Im about to flash a mogul to cricket for a buddy of mine. Does your cricket carrier cab configure everything for cricket to where all i have to do is program his numbers and arcsoft mms server settings ?

sorry but im on sprint and have been having a really hard time getting info on cricket flashing for the mogul.

thanks man

[jdoc]

This worked for me for turning-off the threaded message.

http://forum.xda-developers.com/showthread.php?t=394219

That worked. Thank you very much!!!

[240sxer]

:(

Why isn't there a step by step guide on how to UPGRADE from an old rom to a new one? The FAQ and Wiki only has for new installs.

I'm still running 3.2.0 with 3.42.30. How do I upgrade both? Whats the benefit of upgrading the Radio? Whats the kitchen file and how is it different from the Rom/radio?

[ande8150]

:(

I'm still running 3.2.0 with 3.42.30. How do I upgrade both? Whats the benefit of upgrading the Radio? Whats the kitchen file and how is it different from the Rom/radio?

You need to upgrade them seperately, using the same methods you did the first time.

Upgrade the radio to the newest version by flashing from SD Card. It affects cell reception, bluetooth & gps quality, etc.

The Kitchen is a progrram that lets you customize what components are included in the O/S Rom. DCD provides a "standard" ROM you can use, but if you want to change what is included in that ROM, then you can use the kitchen to select which items you want before the ROM flashes.

Read through the stickies some more. It is all there.

[240sxer]

Ok, so I want to make sure I understand this before I fry my phone:

Step 1) Upgrade my SPL-2.40.0lipro to nueSPL-2.47 using the nueSPL-2.47.rar file and instructions found within.

Step 2) Upgrade my 2.42.30 Radio to 3.42.50 using the Titan Radio ROM 3.42.50.rar file. Just put the "TITAIMG.nbh" into my formatted storage card and restart and it should do the rest.

Step 3) Upgrade my 3.2.0 Rom to 3.2.6 by using the dcd_titan_3.2.6.exe file. Just click on it while connected to active sync and follow the instructions on my computer?

Step 4) Perform the customization after device restarts?

Step 5) Run the dcd Telus Carrier 20080816.cab file on my Titan (P4000)?

Is this right?

[nitro66215]

Ok, so I want to make sure I understand this before I fry my phone:

Step 1) Upgrade my SPL-2.40.0lipro to nueSPL-2.47 using the nueSPL-2.47.rar file and instructions found within.

Step 2) Upgrade my 2.42.30 Radio to 3.42.50 using the Titan Radio ROM 3.42.50.rar file. Just put the "TITAIMG.nbh" into my formatted storage card and restart and it should do the rest.

Step 3) Upgrade my 3.2.0 Rom to 3.2.6 by using the dcd_titan_3.2.6.exe file. Just click on it and follow the instructions?

Step 4) Perform the customization after device restarts?

Step 5) Run the dcd Telus Carrier 20080816.cab file?

Is this right?
Why are you changing the SPL? SPL-2.40 Olipro works fine with the new radio and rom.

Step 3: Connect with activesync in order to install.

[240sxer]

OP says its recommended to upgrade. I shouldn't?

Hard-SPL 2.XX is REQUIRED.
A device with SPL 1.20-olipro will constantly reboot with this rom!
I would also recommend that Hard-SPL 2.40 users update to Hard-SPL 2.47.

[nitro66215]

OP says its recommended to upgrade. I shouldn't?
That's his recommendation. I'm not sure what the difference is. I haven't had any issues with Hard-SPL 2.40. If there is something wrong with it.... then I wish I was told about it. :D

[gc14]

Benchmarks have proven that SPL 2.47 outperforms 2.40.

[nitro66215]

Benchmarks have proven that SPL 2.47 outperforms 2.40.
I wasn't made aware ever. So I never did update mine. Guess that's the next thing I flash. :D

[mulletmandan]

Quick question (and tell me if I need to post somewhere else): is there any way to run a pre-upgrade script automatically? For example, I'd like to have a script to copy my data to the SD card, then use the SDConfig to copy the data back to the device after running the ROM upgrade.

BTW, guys, if you want a quick and easy way to set your email accounts and settings up automatically, try this:
http://tiermann.net/index.php?option=com_content&view=article&id=3:personal-oemizer&catid=1:Desktop&Itemid=3

I was able to make an OEM module with all of my personal settings. Worked like a charm! You can supposedly use this to convert CABs to OEM folders, but I don't recommend it. There are too many things you have to edit to get everything just right. I spent 3-4 hours trying to integrate everything OEM, but I just gave up and used the SD card autorun. So much easier.

[ande8150]

Benchmarks have proven that SPL 2.47 outperforms 2.40.

Interesting - outperforms with what? time to flash radios? Any other preformance improvements to be had? I am running 2.4 without any issues / complaints.

Step 2) Upgrade my 2.42.30 Radio to 3.42.50 using the Titan Radio ROM 3.42.50.rar file. Just put the "TITAIMG.nbh" into my formatted storage card and restart and it should do the rest.

You must "enter bootlaoder" as opposed to "restart". Press power+camera+reset button.

Steps 4 and 5 are both yes.

[flyers2114]

Quick question (and tell me if I need to post somewhere else): is there any way to run a pre-upgrade script automatically? For example, I'd like to have a script to copy my data to the SD card, then use the SDConfig to copy the data back to the device after running the ROM upgrade.

BTW, guys, if you want a quick and easy way to set your email accounts and settings up automatically, try this:
http://tiermann.net/index.php?option=com_content&view=article&id=3:personal-oemizer&catid=1:Desktop&Itemid=3

I was able to make an OEM module with all of my personal settings. Worked like a charm! You can supposedly use this to convert CABs to OEM folders, but I don't recommend it. There are too many things you have to edit to get everything just right. I spent 3-4 hours trying to integrate everything OEM, but I just gave up and used the SD card autorun. So much easier.

You should try SASHAMI it is an excellent program and it does everything for you....CABS,reg entries...etc...very easy to use....:D

[symyn]

Thanks dcd! The rom is working great so far :)

[mulletmandan]

You should try SASHAMI it is an excellent program and it does everything for you....CABS,reg entries...etc...very easy to use....:D

Yeah, I checked that out, but UC was a bit simpler for me.

Are there any other programs that will integrate CABs into the actual ROM for you? I would love to be able to do a hard reset and come up with all of my programs. Granted, UC doesn't take that long...

[serfboreds]

Interesting - outperforms with what?

Check out this link by DCD over at PPC Geeks:

http://forum.ppcgeeks.com/showpost.php?p=331091&postcount=31

[serfboreds]

Yeah, I checked that out, but UC was a bit simpler for me.

Are there any other programs that will integrate CABs into the actual ROM for you? I would love to be able to do a hard reset and come up with all of my programs. Granted, UC doesn't take that long...

The option you are looking for is OEMs, but they have been proven to be buggy, and prevent you from uninstalling

[mulletmandan]

The option you are looking for is OEMs, but they have been proven to be buggy, and prevent you from uninstalling

Yep, bingo. I figured that. Ahh well, UC isn't much of an inconvenience.

[Cobaltikus]

dcd1182,

In 3.2.5, in Messaging > Email, I could select one or more emails, tap "Menu" and in the menu there was an option labeled something like "Download" or "Download Messages".

In 3.2.6, the option is gone.

I did use that option a lot, but it is not a huge deal living without it.

My questions:
1. Out of curiosity, was that just a change in the M$ Build or was that something else?
2. Is this something that could be included in later releases? (Or is that dependent on M$?)

[larrybagina]

I am almost ready to flash my USCC phone and try this ROM with the US Cellular cab... was there a problem with that cab and the settings? I have read that some of the EPST settings had to be modified. Was there a problem, and if so, was it fixed?

I have been reading so much trying to learn that everything is starting to blur together...

[Cobaltikus]

I was unable to flash my kitchen built rom using nueSPL from the Storage Card.

I have been flashing roms using this method for a while and it just stopped working after I built my latest rom from the 3.2.6 kitchen. I really like being able to keep a few roms on my Storage Card and flash them without any PC interaction.

I was able to flash it using the RUU method so all's well for now but I am curious as to why all of a sudden the Storage Card method stopped working. I put it in boot loader mode by pressing and holding power, camera and reset. It goes to the ugly rainbow screen. But then instead of switching quickly to the screen that usually says "TITAIMG" and "OS" and "press power" it just stays at the rainbow screen and the word "SERIAL" appears in the bottom color.

This only happened after cooking in a Pocket Sand OEM, which by the way, does anyone have a Pocket Sand cab? I much prefer cabs.

Not an issue really, but curious.

Anyone else out there have this same issue and possibly a solution?

[Cobaltikus]

Yep, bingo. I figured that. Ahh well, UC isn't much of an inconvenience.

You might want to try OEMIZER. It can take a cab and make it into an OEM. But like serfboreds said, "they have been proven to be buggy, and prevent you from uninstalling"

Still, a pretty cool tool, and many cab to oem conversions work flawlessly. Usually if during the installation of a particular cab, you are asked to reboot or are prompted for more information, converting that cab to an OEM will not usually produce good results.

For me personally, I ONLY use OEMs when I can't find the cabs

[Cobaltikus]

dcd--suggestion for your next update--
Could you please include the dialer popup fix?
Registry fix:
http://forum.xda-developers.com/showthread.php?t=413151
Thanks,
jtg

I know that SPB Pocket Plus 4 is one culprit that un-fixes the dialer pop up. There is that registry fix where you change a 1 to a 2 or something, which is probably built in now with 3.2.6, but SPB Pocket Plus 4 (and probably other programs) set it back to 1, unfixing the dialer pop up issue. It is odd though that this doesn't happen in non-dcd roms, but I don't use PP4 any more so all's well for me. I just used it mainly for the panning in PIE, which I now use Opera Mobile and Skyfire, and I used it to show my memory status, remaining device space, and remaining storage card space, which I now have a new program I wrote (modified m$ sample of memwatcher) to do that so I don't need pp4 any more.

Curious: are you using SPB Pocket Plus?

Edit: I also really liked the additional hardware button hold options you get with SPB PP4, but I was able to live without it in order to regain all the memory it hogged.

D C D 1 1 8 2: Is that something you might be able to incorporate? Additional Button Setting options? i.e. "Message Button (Hold)" and "IE Button (Hold)"? Just a really nice to have that we can probably all live without. Just though I might try and plant a seed.

[flyers2114]

I was unable to flash my kitchen built rom using nueSPL from the Storage Card.

I have been flashing roms using this method for a while and it just stopped working after I built my latest rom from the 3.2.6 kitchen. I really like being able to keep a few roms on my Storage Card and flash them without any PC interaction.

I was able to flash it using the RUU method so all's well for now but I am curious as to why all of a sudden the Storage Card method stopped working. I put it in boot loader mode by pressing and holding power, camera and reset. It goes to the ugly rainbow screen. But then instead of switching quickly to the screen that usually says "TITAIMG" and "OS" and "press power" it just stays at the rainbow screen and the word "SERIAL" appears in the bottom color.

This only happened after cooking in a Pocket Sand OEM, which by the way, does anyone have a Pocket Sand cab? I much prefer cabs.

Not an issue really, but curious.

Anyone else out there have this same issue and possibly a solution?

I would reformat the card...then give it another try....

[hindjew1]

I'm used to using WMWIFIROUTER...i think i fried my wifi...(darn)

I'm thinking about tethering using the Internet Sharing program and tether via USB. Til now, Sprint hasn't charged me for tethering. Will SPrint find out if I'm using Internet Sharing program?

Thanks....

[ande8150]

Check out this link by DCD over at PPC Geeks:

http://forum.ppcgeeks.com/showpost.php?p=331091&postcount=31

Thanks Serf. Had no idea boot loader had that much to do with overall performance. Just thought it was used during flashing and boot.

[President Fluid]

So what is the correct way of flashing this ROM? I have only used BuildOS in the past.

Is there a way to use this ROM with BuildOS?

I am unfamilliar with flashing ROMS anyother way.

[SysCrasher13]

Hey guys earlier versions of the kitchen had and option for installing the default Sprint GPS app, its gone now, what are you guys using, or how are you doing it, i checked out the official update for the titan over at HTC's site and it has an updated version of Sprint Navigation, any suggestions on what to use or is there a cab out there? or what are you guys using?

thanks!

[flyers2114]

Hey guys earlier versions of the kitchen had and option for installing the default Sprint GPS app, its gone now, what are you guys using, or how are you doing it, i checked out the official update for the titan over at HTC's site and it has an updated version of Sprint Navigation, any suggestions on what to use or is there a cab out there? or what are you guys using?

thanks!


There is definitely a cab floating around over at PPCGeeks....if you do not find it let me know and I can pull it from my home computer in the AM.....

[SysCrasher13]

I found the post on PPCGeeks but the link was dead for the new sprint nav, does anyone have it??

[Mikee4fun]

DcD or anyone else who can help me on this would be great. I want to use the new looking ev icon and 1x icon that is in the attached tapres.96.dll file attached. If I overwrite the one in rom which I cooked from the dcd kitchen I just get data arrows with a x where the ev and 1x icon appear. I looked over the kitchen and I cannot find a file tapres.96.dll just a folder. Can anyone point me in the right direction to make this work.

Thanks in advance!!!

Mikee

[t0mmyr]

no, doesnt it come as a .cab in the sprint ROMs? i thought people were installing that way.

i think u are thinking of the sprint navigation cab which can be copied from the windows directory of an official sprint rom...to my knowledge i cant find an official sprinttv cab unless it is hidden on the ext rom of the 3.56 rom. i UC a sprint tv cab for mogul i found off ppcgeeks.com but last time i ran it it gave me errors.

[t0mmyr]

I found the post on PPCGeeks but the link was dead for the new sprint nav, does anyone have it??
google sprint-navigation-htc-mogulmr-2.0.15.cab

[SysCrasher13]

Found version 2 here if anyone is interested

http://forum.xda-developers.com/showpost.php?p=2364928&postcount=4

[abusalza]

DcD or anyone else who can help me on this would be great. I want to use the new looking ev icon and 1x icon that is in the attached tapres.96.dll file attached. If I overwrite the one in rom which I cooked from the dcd kitchen I just get data arrows with a x where the ev and 1x icon appear. I looked over the kitchen and I cannot find a file tapres.96.dll just a folder. Can anyone point me in the right direction to make this work.

Thanks in advance!!!

Mikee

i have make those cab for you. see attachment below:D

[Bigstew33]

quick question for you dcd.

Im about to flash a mogul to cricket for a buddy of mine. Does your cricket carrier cab configure everything for cricket to where all i have to do is program his numbers and arcsoft mms server settings ?

sorry but im on sprint and have been having a really hard time getting info on cricket flashing for the mogul.

thanks man

I am not sure how many people are experts with this. I have asked this before as well. In the section for the 3.2.5 release someone answered my question. There was a whole list of things to do so I got scared and still haven't gotten my own Sprint Mogul on the Cricket network. If someone knows of a good write up somewhere that has it written out clearly I would love to know about it. Thanks

[BillThyCat]

I am almost ready to flash my USCC phone and try this ROM with the US Cellular cab... was there a problem with that cab and the settings? I have read that some of the EPST settings had to be modified. Was there a problem, and if so, was it fixed?

I have been reading so much trying to learn that everything is starting to blur together...

Do a search for the registry tweak that creates a log file with your SPL in it. Then use QPST to read the phone programming info, do all the flashes, then write the phone programming back, then dial *228 to update your SPL and get the phone back online.

Worked perfect on my first try.

Cab works fine, tho you need the QPST programming back on the phone to make it work perfect. Without that you may have issues with seeing the phone dialup and a few other minor issues.

BTC

[im1badazchick]

I am not sure how many people are experts with this. I have asked this before as well. In the section for the 3.2.5 release someone answered my question. There was a whole list of things to do so I got scared and still haven't gotten my own Sprint Mogul on the Cricket network. If someone knows of a good write up somewhere that has it written out clearly I would love to know about it. Thanks Hey guys it's not as hard as you may think and everything does work if it's fully flashed...i had a custom rom from Vetvito since may and loved it...try here http://forum.ppcgeeks.com/showthread.php?t=18836 and i currently have dcd 326 which i love even more but i couldn't get the pic/vid messaging woring at first...the carrier cabs put the info to allow you to connect to your data services..you still have to enter your basic info...as for the mms...i read earlier in this thread that there is no mms client included in the kitchen...i used a oem from arcsoft and included it with the settings for cricket and it works flawlessly:D also if you go to the cricket section of Howardforums there are tuts for flashing several types of phones to cricket and a sub forum for pda's...here is a flash vid that Burger made on how to flash your titan to cricket...hope it helps http://www.jrstreet.com/flash/burgertime.htm

[larrybagina]

I have tried searching, and I have built a rom from a kitchen before...but I can not figure out how to build this from PPC kitchen. Can anybody help? :o

[nitro66215]

I have tried searching, and I have built a rom from a kitchen before...but I can not figure out how to build this from PPC kitchen. Can anybody help? :o
This rom has it's own kitchen. On the first page. Download it.. and then run BuildNB.bat

[larrybagina]

Do a search for the registry tweak that creates a log file with your SPL in it. Then use QPST to read the phone programming info, do all the flashes, then write the phone programming back, then dial *228 to update your SPL and get the phone back online.

Worked perfect on my first try.

Cab works fine, tho you need the QPST programming back on the phone to make it work perfect. Without that you may have issues with seeing the phone dialup and a few other minor issues.

BTC

Thank you! I will check this out. I flashed my phone last night, and finally got it working (except GPS, yet). My build was not as good as I wanted, but I am still learning...

[thetoady]

This is a change that wasn't in old DCD roms that I used.

It seems the screen turns off when I make a call (though not when I pick up a call I receive).

This is problematic, as for instance, lets say the # is busy. I'd want to hangup, but the hangup button no longer works, I now have to turn the screen back on and then press the hangup button.

any ideas on how to change this?

thanks.

[KeithGP]

I have DCD 3.1.2 rom on my Verizon XV6800 and want to upgrade to the 3.2.6, Is there an easier path than me starting over by returning my rom to the Verizon original then putting olipro 2.4 then the radio then the rom? Can I just install the new rom?

Thanks for the help all in advance!

[240sxer]

I have DCD 3.1.2 rom on my Verizon XV6800 and want to upgrade to the 3.2.6, Is there an easier path than me starting over by returning my rom to the Verizon original then putting olipro 2.4 then the radio then the rom? Can I just install the new rom?

Thanks for the help all in advance!

See post 179 onwards..

[lvgdgts]

I have DCD 3.1.2 rom on my Verizon XV6800 and want to upgrade to the 3.2.6, Is there an easier path than me starting over by returning my rom to the Verizon original then putting olipro 2.4 then the radio then the rom? Can I just install the new rom?

Thanks for the help all in advance!

There's no need to return to the stock ROM. If you've flashed DCD's ROM before, you should already have Olipro 2.40 or 2.47 on the phone. All you have to do is flash the new ROM.

[symyn]

i have make those cab for you. see attachment below:D


I tried this and it doesn't make the EV into a fun icon, it makes it look like 2 arrows and an X. I would not recommend this install.

[shubhanyu]

Will anyone tell me what kind of an icon are we trying to get, and what is the source? Even I installed, got a beautiful X with two arrows as gift ... ;)

[TimothyP]

Total Noob here (im sure you can tell by my post count). I am interested in downloading wm6.1 for the titan from Verizon. Are there step by step instructions posted somewhere? I noticed cab files on the first page, are these files for upgrading the device to wm6.1? I appreciate all of your help.

[nitro66215]

Total Noob here (im sure you can tell by my post count). I am interested in downloading wm6.1 for the titan from Verizon. Are there step by step instructions posted somewhere? I noticed cab files on the first page, are these files for upgrading the device to wm6.1? I appreciate all of your help.
If you want to stick with stock verizon... then just download their file from the website... get an activesync connection... and load. But beware... if you want GPS support in the future... DO NOT LOAD IT.

If you want to get the custom rom support from this site.... Read This (http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome)

[TimothyP]

If you want to stick with stock verizon... then just download their file from the website... get an activesync connection... and load. But beware... if you want GPS support in the future... DO NOT LOAD IT.

If you want to get the custom rom support from this site.... Read This (http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome)

I dont need gps at all. I am interested in this rom. I have found the FAQ page. Question, i am at this point:
if it is 1.04, 1.06, or 2.07 then you must unlock your phone and upgrade to 2.40 or 2.47. Olipro 1.20 is not necessary at all when using newer ROMs/Radios.
Mines is 1.04. How do i unlock and upgrade to 2.40 or 2.47? Thanks for your help.

[nitro66215]

I dont need gps at all. I am interested in this rom. I have found the FAQ page. Question, i am at this point:

Mines is 1.04. How do i unlock and upgrade to 2.40 or 2.47? Thanks for your help.

Download your choice of file.....


1.

Hit Power-Camera-Reset to check what version of bootloader you have installed.
*

At the tri-colour bootscreen you will see the version number installed.
o if it is 1.04, 1.06, or 2.07 then you must unlock your phone and upgrade to 2.40 or 2.47. Olipro 1.20 is not necessary at all when using newer ROMs/Radios.
o if it is 1.20 then you have the pre-GPS ROM bootloader and must first flash to one of the older ROMs and associated radio to boot into WM, get an ActiveSync connection and then upgrade to 2.40.
o if it is 2.40 or 2.47 then you have the correct bootloader and are ready to move on to the Radio Upgrade in Section III.
2.

Reset your device and boot into Windows Mobile
* if you cannot boot into the OS, then for your installed bootloader you must flash your Titan to a suitable stock or third party ROM plus have installed the appropriate radio for that ROM.
Choose A or B
IF YOU HAVE A MicroSD CARD
A. Upgrade via the microSD (<=2GB) card

(Thanks to No2Chem - donate here)

1. Copy the nueSPL-2.47.exe file onto your device.
2. Run the application and accept the license agreement, then press CONTINUE.
3. Read the prerequisite check screen carefully. If it indicates that you do not have a FAT32 formatted partition, you will need to format your microSD card by pressing FORMAT.
4. If your card is already FAT32 formatted, and it has as least 1MB of space available, press CONTINUE.
5. Press CONTINUE to begin the fashing proccess. It will take approximately 10 seconds to complete, and your phone will reboot automatically. If prompted, press the POWER button to begin updating.
6. Allow your phone to fully reboot. Once your phone is rebooted, open fle explorer and inspect to see if your storage card contains the file TITAIMG.nbh. If it is present, delete it before continuing.
7. Press the CAMERA-POWER-RESET buttons at the same time in order to enter the bootloader. You should see a screen that says SPL-2.47No2Chem Titan SPL EVT. If you see this text, your SPL has been sucessfully updated If you do not, power of your phone and start over from step 1. To return back to your phone, press the RESET button.
IF you have a USB cable and Activesync
B. Upgrade via the USB
1. Establish an ActiveSync connection
2.

On your PC execute Hard-SPL-MFG.exe to upgrade the bootloader to 2.40
* Follow the steps in the CMD window closely, you need to disconnect and reconnect the USB cable half way through the procedure to get the new bootloader installed correctly.

[TimothyP]

^^That part went succesful. Thanks for your help. These steps are quite confusing. may i ask your assistance with the next step?

[nitro66215]

^^That part went succesful. Thanks for your help. These steps are quite confusing. may i ask your assistance with the next step?
Do you have a MicroSD card?

[TimothyP]

Do you have a MicroSD card?

sure do. Thats how i will be doing this upgrade. I dont need to connect to my pc, correct?

[nitro66215]

sure do. Thats how i will be doing this upgrade. I dont need to connect to my pc, correct?
Correct.

1) Download Radio 3.42.50 from here.... Radio 3.42.50 (http://lifesnotsogood.com/dcd1182/titan/radios/Titan%20Radio%20ROM%203.42.50.rar)

2) Extract the file TITAIMG.nbh from the rar and copy it to the SD Card and put the card back into the phone

3) Get into BootLoader. Power + Camera + reset. Follow the prompts.
when it's complete.... get back into bootloader.

4) Download DCD 3.2.6 HERE (http://www.lifesnotsogood.com/dcd1182/titan/roms/dcd_titan_3.2.6.exe)

5) Right click on the EXE and extract the files. you'll find Ruu_signed.nbh. Rename it TITAIMG.nbh and copy it to your MicroSD card using your SD adapter on the computer.

Same as above... Power+Camera+reset....

When complete... let it boot into WM6.1

[BlueBeetle]

I just loaded 3.2.5 on my Mogul about a week ago. Should I just stick with that or is their a good reason to upgrade? Just wondering since I just finished loading all of my apps and configuring it. Thanks!

[TimothyP]

3) Get into BootLoader. Power + Camera + reset. Follow the prompts.
when it's complete.... get back into bootloader.


There were no prompts, it just quickly said "Update in Progress". Now its says Update Completed. Update Success".

Now do i soft reset and install the 3.2.6 file?

[TimothyP]

Correct.

1) Download Radio 3.42.50 from here.... Radio 3.42.50 (http://lifesnotsogood.com/dcd1182/titan/radios/Titan%20Radio%20ROM%203.42.50.rar)

2) Extract the file TITAIMG.nbh from the rar and copy it to the SD Card and put the card back into the phone

3) Get into BootLoader. Power + Camera + reset. Follow the prompts.
when it's complete.... get back into bootloader.

4) Download DCD 3.2.6 HERE (http://www.lifesnotsogood.com/dcd1182/titan/roms/dcd_titan_3.2.6.exe)

5) Right click on the EXE and extract the files. you'll find Ruu_signed.nbh. Rename it TITAIMG.nbh and copy it to your MicroSD card using your SD adapter on the computer.

Same as above... Power+Camera+reset....

When complete... let it boot into WM6.1

So now i have 2 TITAIMG.nbh files on my card?

[nitro66215]

So now i have 2 TITAIMG.nbh files on my card?
No. Only one at a time. Do the radio... then let it flash...

overwrite the radio with the 3.2.6 Rom

[President Fluid]

Correct.

1) Download Radio 3.42.50 from here.... Radio 3.42.50 (http://lifesnotsogood.com/dcd1182/titan/radios/Titan%20Radio%20ROM%203.42.50.rar)

2) Extract the file TITAIMG.nbh from the rar and copy it to the SD Card and put the card back into the phone

3) Get into BootLoader. Power + Camera + reset. Follow the prompts.
when it's complete.... get back into bootloader.

4) Download DCD 3.2.6 HERE (http://www.lifesnotsogood.com/dcd1182/titan/roms/dcd_titan_3.2.6.exe)

5) Right click on the EXE and extract the files. you'll find Ruu_signed.nbh. Rename it TITAIMG.nbh and copy it to your MicroSD card using your SD adapter on the computer.

Same as above... Power+Camera+reset....

When complete... let it boot into WM6.1

Thanks for this little write up.

Just what I needed to know.

[TimothyP]

No. Only one at a time. Do the radio... then let it flash...

overwrite the radio with the 3.2.6 Rom

You are the best. Thank you for all your help. That went very successful. Last question, restoring. can i restore from a previous backup? What about if i only want to restore my contacts, as i dont sync with my pc.

Internets not working on my device, should i call verizon?

[nitro66215]

OOPS!! ONE LAST STEP.... You need the Verizon Carrier cab. Locate it HERE (http://lifesnotsogood.com/dcd1182/carriers/dcd%20Verizon%20Carrier%2020080719.cab)

Copy it to your phone and run it on your phone. Then soft-reset.

Don't forget to *228 option 1... then after it reboots.... *228 option 2

[TimothyP]

OOPS!! ONE LAST STEP.... You need the Verizon Carrier cab. Locate it HERE (http://lifesnotsogood.com/dcd1182/carriers/dcd%20Verizon%20Carrier%2020080719.cab)

Copy it to your phone and run it on your phone. Then soft-reset.

Don't forget to *228 option 1... then after it reboots.... *228 option 2

Got it, and what about restoring?

You are the best. Thank you for all your help. That went very successful. Last question, restoring. can i restore from a previous backup? What about if i only want to restore my contacts, as i dont sync with my pc

[nitro66215]

Got it, and what about restoring?

You are the best. Thank you for all your help. That went very successful. Last question, restoring. can i restore from a previous backup? What about if i only want to restore my contacts, as i dont sync with my pc
i'm not familiar with Backing up using any software. Somebody else may have to chime in. I just sync my contacts... and backup my messages with Jeyo SMS backup. I don't think you'll have a problem restoring using whatever software you used to backup originally

[Flagmax]

Just loaded DCD rom dcd_titan_3.2.6.exe on mogul by Sprint. Looking really good, fast and have 25~mb of free RAM :) I see everything is stripped down.

What is the best option to get JAVA and SprintTV on my device? I see I can use the kitchen to build a rom with Jeodek.

Or is it best to keep rom clean and install everything I want manually then use backup program for quick recovery?

[TimothyP]

i'm not familiar with Backing up using any software. Somebody else may have to chime in. I just sync my contacts... and backup my messages with Jeyo SMS backup. I don't think you'll have a problem restoring using whatever software you used to backup originally

Ok, i will wait for someone else to give me their thoughts on restoring. Again, thanks for the help.

[nitro66215]

No problem

[lvgdgts]

Got it, and what about restoring?

You are the best. Thank you for all your help. That went very successful. Last question, restoring. can i restore from a previous backup? What about if i only want to restore my contacts, as i dont sync with my pc

It's generally not recommended to do a restore after a ROM change, unless you're talking basic PIM data. SPB Backup 2 has a function that is supposed to allow for a restore after a ROM change, but you run the risk of introducing some problems.

[flyers2114]

Ok, i will wait for someone else to give me their thoughts on restoring. Again, thanks for the help.


What app did you use to b/u? What are you looking to restore also?

[Summit1]

It's generally not recommended to do a restore after a ROM change, unless you're talking basic PIM data. SPB Backup 2 has a function that is supposed to allow for a restore after a ROM change, but you run the risk of introducing some problems.It's working well for me. I select the ROM update option and (KEY) uncheck the overwrite existing files. New, unique files get restored . . . existing files do not get overwritten. Boots up very nicely to my pre-ROM update state of functionality.

[lvgdgts]

It's working well for me. I select the ROM update option and (KEY) uncheck the overwrite existing files. New, unique files get restored . . . existing files do not get overwritten. Boots up very nicely to my pre-ROM update state of functionality.

I have been awfully tempted to do this. Some of the ROMs will adjust registry setings and doing a restore may change those settings which may introduce a bug or not allow for the fullest benefits of the newer ROM. It may also not allow programs to work correctly. I will definitely be following this function with much interest.

[dalepl]

Well, I finally took the plung and updated my phone from 3.2.5 to 3.2.6 :). All went well untill I checked MMS. I used DCD's Alltel cab to setup my carrier and MMS still will not work with it :(. Anyway, I went back to the Alltel OEM I edited with a little help from another user and re-cooked the ROM. I can now report that MMS is again working :p.

DCD. I would like for you to get your Alltel carrier cab fixed. I have attached the OEM I am using so you can take a look at it or make it into a cab. The optional.xml data I add to your optional.xml file in the SYS folder. I copy the carriers_alltel folder to your SYS folder. I then cook the ROM and load it onto my phone. I do not know enough about this stuff to know what the differences are, so maybe you can check it out.

Anyway, thank you for the good work. Keep it up. We need folks like you to keep the carriers honest ;). As of right now, all is running smooth. Very fast and no problems. Will let you know if I run into any issues.

P. Dale
Niceville, Florida
***************
Alltel PPC6800
ROM - DCD 3.2.6
Radio - 3.42.50

[Summit1]

I have been awfully tempted to do this. Some of the ROMs will adjust registry setings and doing a restore may change those settings which may introduce a bug or not allow for the fullest benefits of the newer ROM. It may also not allow programs to work correctly. I will definitely be following this function with much interest.I cannot state with absolute certainty that there are no new ROM functionalities overwritten, but there is nothing awry that I can discern. ALL of my issues I had with the stock ROM and my XV6800 are solved, namely:

Alarms (SPB Time) work precisely and dependably
Scheduled Backups (SPB) run without error and without creating corrupt backups
Device reboots with the micro-SD card inserted
All instructions execute faster
Resco Explorer Networking works - cradled and WiFi (did not with stock ROM)
Several other application specific bugs disappeared

Leaving me with no known issues . . . so I'm a happy camper. :)

[Silver 96 Z28]

Good messaging does not let me open programs? Is there a registry change or 3rd party program to let me open programs. 3.2.5 had the same problem and I went back to 3.2.3
I just upgraded from 3.2.3.

Thanks for any help

P.S. Just sent a donation

I have Good Messaging installed on my vx6800. I've had no issues running Good with DCD 3.1.6, 3.2.5 and now 3.2.6, well other than Good being a memory hog.

Currently I'm running Good version 5.0.5.23